ccqmCmtsIfBwUtilTable - Cisco Cable QOS monitor Cmts If Bandwidth Utilization Table - CISCO-CABLE-QOS-MONITOR-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

ccqmCmtsIfBwUtilTable

Cisco Cable QOS monitor Cmts If Bandwidth Utilization Table
1.3.6.1.4.1.9.9.341.1.3.1

This table contains the attributes which define the bandwidth utilization thresholds for the upstream and downstream interfaces and when the load on these interfaces exceeds the upper threshold, the monitoring of the associated modems service flows starts, and it stops when the interface utilization drops below the lower threshold. For the monitoring to start, there should be appropriate enforce-rules defined. In case no thresholds are defined, by default the monitoring of modems would take place if the appropriate enforce-rules are present.

Back to CISCO-CABLE-QOS-MONITOR-MIB MIB page.

IPHost Network monitor allows you to monitor ccqmCmtsIfBwUtilTable on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco optical switches right now.

MIBs list