ccaHCCPGroupIfLastSwitchReason - CISCO CABLE AVAILABILITY HCCP Group If Last Switch Reason - CISCO-CABLE-AVAILABILITY-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

ccaHCCPGroupIfLastSwitchReason

CISCO CABLE AVAILABILITY HCCP Group If Last Switch Reason
1.3.6.1.4.1.9.9.242.1.1.3.1.5

The reason for last switch. none(1) : No switchover has occurred. holdTimeExpire(2) : Occurs when HCCP fails to hear HELLO/HELLO_ACK and the hold time expires. hwIfDown(3) : Occurs when the hardware interface is down. (eg shut/no shut) failTest(3) : Failover was CLI initiated or SNMP initiated through ccaHCCPGroupSwitchNow. failLinkDown(4) : Failure in the cable wiring or a hardware interface. failBundleDown(5) : A bundled interface failure. internal(6) : All other failures .

Back to CISCO-CABLE-AVAILABILITY-MIB MIB page.

IPHost Network monitor allows you to monitor ccaHCCPGroupIfLastSwitchReason on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

MIBs list