cAdslDmtBinIfRqstStatus - Cisco Adsl Dmt Bin If Rqst Status - CISCO-ADSL-DMT-LINE-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

cAdslDmtBinIfRqstStatus

Cisco Adsl Dmt Bin If Rqst Status
1.3.6.1.4.1.9.9.130.1.17

This object initiates the polling and stores the status of the last DMT Bin request. This object can have the following values : reset (-1) : write this value to reset the the finite state machine (FSM) that controls the reading of bin information on a DMT interface. pollNow (1) : write this value to begin bin polling on an interface specified in cAdslDmtBinIfNumber. noIfConfigured(2) : status read when no valid interface is set in cAdslDmtBinIfNumber ifConfigured(3) : status read when a valid interface is set in cAdslDmtBinIfNumber rqstInProgress(4) : status returned until the data collection is complete on an interface. lcDownForIf (5) : status returned if the line card is down for the interface. ifUntrained (6) : status returned if the interface on the DSLAM is untrained. failure (7) : status returned when the request cannot be completed due to error. success (8) : status returned when bin data collection has been properly completed. Data collected on a status of success (8) will be available in cAdslAtucDmtBinTable and cAdslAturDmtBinTable. A read of this object can return any value between 2 and 8, while a write can only be set to the value of 1 or -1.

Back to CISCO-ADSL-DMT-LINE-MIB MIB page.

IPHost Network monitor allows you to monitor cAdslDmtBinIfRqstStatus on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco switches right now.

Easy monitoring of cAdslDmtBinIfRqstStatus with IPHost tools

MIBs list