caem Supply Status Table

1.3.6.1.4.1.9.9.61.1.1

The table contains the additional power supply information that are not covered in the ciscoEnvMonSupplyStatusTable of CISCO-ENVMON-MIB. ::= { caemObjects 1 } SYNTAX CaemSupplyStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION Additional information about the failure component or location in the power Supply beyond that provided by Cisco Environmental Monitor MIB's ciscoEnvMonSupplyStatusEntry. AUGMENTS { ciscoEnvMonSupplyStatusEntry } ::= { caemSupplyStatusTable 1 } CaemSupplyStatusEntry ::= SEQUENCE { caemSupplyFailedComponent INTEGER } SYNTAX INTEGER { none (1), inputVoltage (2), dcOutputVoltage (3), thermal (4), multiple (5), fan (6), overvoltage (7) } MAX-ACCESS read-only STATUS current DESCRIPTION The failure component of the power supply being instrumented. none - No failure. inputVoltage - Input power lost in one of the power supplies dcOutputVoltage - DC output voltage lost in one of the power supplies thermal - Power supply thermal failure. multiple - Multiple failures. fan - Fan failure overvoltage - Over voltage. ::= { caemSupplyStatusEntry 1 } --**************************************************************************** -- Notifications --**************************************************************************** caemMIBNotificationPrefix OBJECT IDENTIFIER ::= { ciscoAccessEnvMonMIB 2 } caemMIBNotifications OBJECT IDENTIFIER ::= { caemMIBNotificationPrefix 0 } caemTemperatureNotification NOTIFICATION-TYPE OBJECTS { ciscoEnvMonTemperatureStatusDescr, ciscoEnvMonTemperatureState } STATUS current DESCRIPTION A caemTemperatureNotification is sent if the over temperature condition is detected in the managed system. This is a replacement for the ciscoEnvMonTemperatureNotification trap because the information 'ciscoEnvMonTemperatureStatusValue' required by the trap is not available in the managed system. ::= { caemMIBNotifications 1 } caemVoltageNotification NOTIFICATION-TYPE OBJECTS { ciscoEnvMonVoltageStatusDescr, ciscoEnvMonVoltageState } STATUS current DESCRIPTION A caemVoltageNotification is sent if the over voltage condition is detected and ciscoEnvMonVoltageState is not set to 'notPresent' in the managed system. This is a replacement for the ciscoEnvMonVoltageNotification trap because the information 'ciscoEnvMonVoltageStatusValue' required by the trap is not available in the managed system. ::= { caemMIBNotifications 2 } caemConformance OBJECT IDENTIFIER ::= { ciscoAccessEnvMonMIB 3 } caemCompliances OBJECT IDENTIFIER ::= { caemConformance 1 } caemGroups OBJECT IDENTIFIER ::= { caemConformance 2 } -- compliance statements caemCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION The compliance statement for entities which implement the Cisco Environmental Monitor Supplemental MIB.