jnxBgpM2PeerHoldTimeConfigured - jnx Bgp M2 Peer Hold Time Configured - BGP4-V2-MIB-JUNIPER

MIBs list

jnxBgpM2PeerHoldTimeConfigured

jnx Bgp M2 Peer Hold Time Configured
1.3.6.1.4.1.2636.5.1.1.2.4.2.1.2

Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BGP speaker, and is compared with the Hold Time field in an OPEN message received from the peer when determining the Hold Time (jnxBgpM2PeerHoldTime) with the peer. This value must not be less than three seconds if it is not zero (0) in which case the Hold Time is NOT to be established with the peer. The suggested value for this timer is 90 seconds.

Back to BGP4-V2-MIB-JUNIPER MIB page.

IPHost Network monitor uses SNMP for monitoring health and availability of devices and applications in your network. You can send a SNMP Set to any remote device to monitor a specific SNMP object (CPU, Memory, Disk, Server Temperature, RAID failures, IO statistics, connection counts, error and much more).

Easy monitoring of jnxBgpM2PeerHoldTimeConfigured with IPHost tools

MIBs list