atmSigEmitClgPtyEvents - Cisco ATM Sig Emit Calling Party Events - ATM2-MIB

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a Cisco device in your network.

atmSigEmitClgPtyEvents

Cisco ATM Sig Emit Calling Party Events
1.3.6.1.2.1.37.1.14.1.3.1.14

Number of Calling Party Events transmitted from this interface. This counter monitors error events that occur due to the originating user doing something wrong. This counter is incremented when a RELEASE, RELEASE COMPLETE (only when not preceded by a RELEASE message for the same call), ADD PARTY REJECT, or STATUS message that contains one of the following cause code values is transmitted (Note: These cause values apply to both UNI3.0 and UNI3.1): Cause Value Meaning 28 invalid number format (address incomplete) 43 access information discarded 57 bearer capability not authorized 65 bearer capability not implemented 73 unsupported combination of traffic parameters 78 AAL parameters cannot be supported (UNI3.1 only) 91 invalid transit network selection 93 AAL parameters cannot be supported (UNI3.0 only) NOTE: For this counter, RELEASE COMPLETE messages that are a reply to a previous RELEASE message and contain the same cause value, are redundant (for counting purposes) and should not be counted.

Back to ATM2-MIB MIB page.

IPHost Network monitor allows you to monitor atmSigEmitClgPtyEvents on Cisco device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco mobile switches right now.

How to get atmSigEmitClgPtyEvents value right now?

MIBs list