group Check Primary Timer

1.3.6.1.4.1.207.8.1.2.2.1.18

TurboStack product family only. The Check Primary Timer is the timer value in seconds which determines how long to wait before checking if the primary port could receive again. This timer applies when the secondary port is enabled, and the primary port's failure is NOT due to loss of link. Range: 1 - 65535 in seconds, 0 means don't check receives. Default is 60 seconds. ::= { groupInfoEntry 18 } SYNTAX INTEGER (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION TurboStack product family only. The Receive Failure Timer is the timer value in seconds which determines how long to wait before the secondary port takes over when the primary port is not receiving data. This timer applies only when the primary port's failure is NOT due to loss of link. Range: 0 - 65535 in seconds, 0 means don't check receives. Default is 60 seconds. ::= { groupInfoEntry 19 } SYNTAX INTEGER (100..65535) ACCESS read-write STATUS mandatory DESCRIPTION TurboStack product family only. The Resample Timer is the timer value in milliseconds which determines how long to sample/test if the primary port could receive data or is no longer partitioned. This timer begins once groupCheckPrimaryTimer has expired, and during this sampling time, the secondary port cannot repeat data. Range: 100 - 65535 milliseconds. Default is 200 milliseconds. ::= { groupInfoEntry 20 } -- -- Following are statistics collected for each module/group in the repeater. -- SYNTAX SEQUENCE OF GroupStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION Table of performance and error statistics for the groups.