prtinputdimunit - prtinputdimunit - 8100STAP

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

prtinputdimunit

prtinputdimunit
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.3

The unit of measurement for use calculating and relaying dimensional values for this input sub-unit. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Following is a table of paper sizes and dimensions for each paper size supported by Yukon: Size Inches (ten-thousandths) Millimeters Feed x Cross-Feed Feed x Cross-Feed --------------- ------------------------ ----------- eUSExecutive 105000 x 72500 266700 x 184150 eUSLetter 85000 x 110000 215900 x 279400 eUSLegal 140000 x 85000 355600 x 215900 eLedger 170000 x 110000 431800 x 279400 eROC16K 107500 x 77500 273050 x 19685 eJISExecutive 130000 x 85000 330000 x 216000 eROC8K 155000 x 107500 393700 x 273050 eISOandJISA5 82677 x 58268 210000 x 148000 eISOandJISA4 82677 x 116929 210000 x 297000 eJISB4 143307 x 101181 364000 x 257000 eJISB5 101181 x 71654 257000 x 182000 eISOandJISA3 165354 x 116929 420000 x 297000 eMonarch 75000 x 38750 190500 x 98425 eCommercial10 95000 x 41250 241300 x 104775 eInternationalDL 86614 x 43307 220000 x 110000 eInternationalC5 90157 x 63780 229000 x 162000 eInternationalB5 98425 x 69291 250000 x 176000 eJapanesePostcardDouble 78740 x 58268 200000 x 148000 eCustom 177000 x 117000(max) 449580 x 297180(max) ::= { prtInputEntry 3 } SYNTAX INTEGER ACCESS read-write STATUS optional DESCRIPTION This object provides the value of the declared dimension, in the feed direction, of the media that is (or, if empty, was or will be) in this input sub-unit. The feed direction is the direction in which the media is fed on this sub-unit. This dimension is measured in input sub-unit dimensional units (prtInputDimUnit). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests. Otherwise, the value may be changed. The value (-1) means other and specifically means that this sub-unit places no restriction on this parameter. The value (-2) indicates unknown. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: For trays 2, 3 and 6 (which can reliably sense this value) these objects behave exactly the same as prtInputMediaDimFeedDirChosen. Attempting to set the objects for tray 2, 3 or 6 will cause to be returned. The default values assume the trays are configured for letter size paper (or COM10, in the case of the envelope feeder). For tray 1, the value is the dimension for the media size currently declared. For the envelope feeder (tray 4), the value is the dimension for the media size currently declared. Valid values are 0 to 268435455. If a value within 0.2 inches of a standard size (e.g. 85001) is chosen when setting these objects, the standard size will be set for the specified tray if the value of prtInputMediaDimXFeedDirDeclared is also set to within 0.2 inches of the same standard size. If the value is not within 0.2 inches, Custom will be chosen as the size if it is supported by the specified tray, otherwise the first available standard size for the tray will be selected.

Back to 8100STAP MIB page.

IPHost Network monitor allows you to monitor prtinputdimunit on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

MIBs list