prtinputcurrentlevel - prtinputcurrentlevel - 8000stap

MIBs list

With IPHost Network Monitor you can run simple snmp requests against a HP device in your network.

prtinputcurrentlevel

prtinputcurrentlevel
1.3.6.1.4.1.11.2.3.9.4.2.2.8.2.1.10

The current capacity of the input sub-unit in input sub-unit capacity units (PrtCapacityUnitTC). If this input sub-unit can reliably sense this value, the value is sensed by the printer and may not be changed by management requests; otherwise, the value may be written (by a Remote Contol Panel or a Management Application). The value (-1) means other and specifically indicates that the sub-unit places no restrictions on this parameter. The value (-2) means unknown. The value (-3) means that the printer knows that at least one unit remains. Refer to ftp://ftp.pwg.org/pub/pwg/pmp/drafts/pmib_031698.txt, for more details in the Standard Printer MIB. Additional information: Koala & Yukon can detect tray level within roughly 25% for trays 2, 3 & 6. For Trays 1 and 4, -3 will be returned if the tray is not empty, and 0 will be returned if the tray is empty. If a tray is removed, a value of -2 (unknown) will be returned.

Back to 8000stap MIB page.

IPHost Network monitor allows you to monitor prtinputcurrentlevel on Hewlett Packard device via the SNMP protocol. Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring Cisco multiplexers right now.

MIBs list