SYSTEM-RESOURCE-MIB DEFINITIONS ::= BEGIN -- system-resource-mib.txt -- Revision: 1.01.00 -- Part Number: -- Date: March 9, 1998 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise specific IP Routing Services MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright March 1998 Cabletron Systems -- -- This is the system resource MIB. The purpose of this MIB is to -- report on current system resources and utilizations, this may include -- both physical as well as logical resources. Examples of physical -- resources is memory. Logical resources may be execution environment -- such as threads etc. IMPORTS OBJECT-TYPE FROM RFC-1212 ctResource FROM CTRON-MIB-NAMES TimeTicks FROM RFC1155-SMI; -- Groups in the system Resource MIB sysResourceInstalled OBJECT IDENTIFIER ::= { ctResource 1 } sysResourceSwitch OBJECT IDENTIFIER ::= { ctResource 2 } -- The sysResourceInstalled group -- This group provides information about installed hardware. -- Implementation of this group is mandatory sysResourceCpuTable OBJECT-TYPE SYNTAX SEQUENCE OF SysResourceCpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table defines the CPus present within the system." ::= { sysResourceInstalled 1 } sysResourceCpuEntry OBJECT-TYPE SYNTAX SysResourceCpuEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Defines a particular CPU entry." INDEX { sysResSlotID, sysResCpuIndex } ::= { sysResourceCpuTable 1 } SysResourceCpuEntry ::= SEQUENCE { sysResSlotID INTEGER, sysResCpuIndex INTEGER, sysResCpuType OBJECT IDENTIFIER, sysResCpuSpeed INTEGER, sysResCpuID INTEGER, sysResInstalledLocalMemory INTEGER, sysResUsedLocalMemory INTEGER } sysResSlotID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The slot for which this CPU information pertains." ::= { sysResourceCpuEntry 1 } sysResCpuIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An identifier for the CPU on a per slot basis." ::= { sysResourceCpuEntry 2 } sysResCpuType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "The processor (CPU) type." ::= { sysResourceCpuEntry 3 } sysResCpuSpeed OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The speed of the processor in mega-hertz." ::= { sysResourceCpuEntry 4 } sysResCpuID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A system wide unique identifier for each CPU." ::= { sysResourceCpuEntry 5 } sysResInstalledLocalMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total installed local memory 'DRAM' used for code and data. This is reported in mega-bytes." ::= { sysResourceCpuEntry 6 } sysResUsedLocalMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current amount of local memory 'DRAM' that is currently being used for code and data. This is reported in bytes." ::= { sysResourceCpuEntry 7 } sysResourceTable OBJECT-TYPE SYNTAX SEQUENCE OF SysResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes total installed system resources." ::= { sysResourceInstalled 2 } sysResourceEntry OBJECT-TYPE SYNTAX SysResourceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular installed set of system resources." INDEX { sysResSlotID, sysResCpuIndex } ::= { sysResourceTable 1 } SysResourceEntry ::= SEQUENCE { sysResInstalledNvram INTEGER, sysResInstalledFlash INTEGER, sysResInstalledSharedMemory INTEGER, sysResUsedNvram INTEGER, sysResUsedFlash INTEGER, sysResUsedSharedMemory INTEGER } sysResInstalledNvram OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total installed non-volatile memory 'NVRAM'. This is reported in K-bytes." ::= { sysResourceEntry 1 } -- .1.2.1.1 sysResInstalledFlash OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total installed flash memory. This is reported in K-bytes." ::= { sysResourceEntry 2 } sysResInstalledSharedMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total amount of shared memory that is installed. This is reported in K-bytes." ::= { sysResourceEntry 3 } sysResUsedNvram OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current amount of non-volatile memory 'NVRAM' that is currently being used for data. This is reported in bytes." ::= { sysResourceEntry 4 } sysResUsedFlash OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current amount of flash memory that is currently being used for code and data. This is reported in bytes." ::= { sysResourceEntry 5 } sysResUsedSharedMemory OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The current amount of shared memory that is currently being used for data. This is reported in bytes." ::= { sysResourceEntry 6 } -- sysResourceSwitch group -- This group is only implemented on those devices where -- control over frame transfer to the CPU is allowed. -- Also present in this group is CPU Switch load objects. sysResManagementCpuResource OBJECT-TYPE SYNTAX INTEGER { none(1), limited(2), full(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired amount of CPU bandwith reserved for management purposes. For example, in the default state (1), the device will devote all CPU bandwith to switching if necessary therefore possibly dropping management frames. If limited (2) is selected, management of the device may appear slow while under maximum switching capabilities although management will still be possible which may result in dropped frames. If full (3) is selected, management of the device is always possible and acts as if there is no switching load on the device, which may result in dropped frames." DEFVAL { none } ::= { sysResourceSwitch 1 } switchLoad OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The returned value represents the current switch load based upon a percentage of maximum switching capacity where maximum switching capacity is 100%." ::= { sysResourceSwitch 2 } peakSwitchload OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The peak load which has occured on this switch. The value returned represents The peak percentage of switch load based upon a percentage of maximum switch load which is 100%." ::= { sysResourceSwitch 3 } peakSwitchLoadTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time at which the peak switch load occured. The value returned will represent system up time at which the peak occured." ::= { sysResourceSwitch 4 } peakSwitchClear OBJECT-TYPE SYNTAX INTEGER { clear(1), noClear(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object is used to clear the values found in peakSwitchload and peakSwitchLoadTime. When set with a value of clear(1) the values will be cleared. When read, a value of noClear(2) will be returned. A set of noClear(2) will have no effect." DEFVAL { noClear } ::= { sysResourceSwitch 5 } END