RBTWS-TRAP-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Unsigned32, TimeTicks, Counter32 FROM SNMPv2-SMI DisplayString, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC RbtwsApAttachType, RbtwsRadioType, RbtwsRadioMode, RbtwsApNum, RbtwsApSerialNum, RbtwsApFingerprint, RbtwsAccessType, RbtwsRadioNum, RbtwsPowerLevel, RbtwsRadioPowerChangeType, RbtwsChannelChangeType, RbtwsApTransition, RbtwsApFailDetail, RbtwsApPortOrDapNum, RbtwsRadioConfigState, RbtwsApConnectSecurityType, RbtwsApServiceAvailability, RbtwsApWasOperational, RbtwsRadioChannelWidth, RbtwsRadioMimoState, RbtwsCryptoType FROM RBTWS-AP-TC RbtwsClientSessionState, RbtwsClientAuthenProtocolType, RbtwsClientDot1xState, RbtwsUserAccessType, RbtwsClientAccessMode FROM RBTWS-CLIENT-SESSION-TC RbtwsRFDetectClassificationReason FROM RBTWS-RF-DETECT-TC rbtwsTraps, rbtwsTemporary, rbtwsMibs FROM RBTWS-ROOT-MIB; rbtwsTrapMib MODULE-IDENTITY LAST-UPDATED "200805151711Z" ORGANIZATION "Enterasys Networks" CONTACT-INFO "www.enterasys.com" DESCRIPTION "Notifications emitted by Enterasys Networks wireless switches. AP = Access Point; AC = Access Controller (wireless switch), the device that runs a SNMP Agent implementing this MIB. Copyright 2008 Enterasys Networks, Inc. All rights reserved. This SNMP Management Information Base Specification (Specification) embodies confidential and proprietary intellectual property. This Specification is supplied 'AS IS' and Enterasys Networks makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." REVISION "200805150215Z" DESCRIPTION "v3.8.5: Clarified description to reflect the actual use and avoid future misuse of rbtwsDeviceSerNum. Updated description for rbtwsApName. Documented the meaning of RbtwsClientIpAddrChangeReason enumeration values. This will be published in 7.0 release." REVISION "200805070212Z" DESCRIPTION "v3.8.2: Added new trap: rbtwsClusterFailureTrap, related TC and objects: RbtwsClusterFailureReason, rbtwsClusterFailureReason, rbtwsClusterFailureDescription (for 7.0 release)" REVISION "200804220202Z" DESCRIPTION "v3.7.2: Added new traps: rbtwsRFDetectRogueDeviceTrap2, rbtwsRFDetectSuspectDeviceTrap2 and related objects: rbtwsRFDetectXmtrRadioType, rbtwsRFDetectXmtrCryptoType. Obsoleted rbtwsRFDetectRogueDeviceTrap, rbtwsRFDetectSuspectDeviceTrap. (for 7.0 release)" REVISION "200804100201Z" DESCRIPTION "v3.7.1: Added new trap: rbtwsClientAuthorizationSuccessTrap4, and related object: rbtwsClientRadioType. Obsoletes rbtwsClientAuthorizationSuccessTrap, rbtwsClientAuthorizationSuccessTrap2, rbtwsClientAuthorizationSuccessTrap3. (for 7.0 release)" REVISION "200804080158Z" DESCRIPTION "v3.6.8: Obsoleted two traps: rbtwsRFDetectSpoofedMacAPTrap, rbtwsRFDetectSpoofedSsidAPTrap. (for 7.0 release)" REVISION "200802180157Z" DESCRIPTION "v3.6.7: Redesigned the AP Operational - Radio Status trap to support 11n-capable APs. Added varbindings: rbtwsRadioChannelWidth, rbtwsRadioMimoState. The new trap is rbtwsApOperRadioStatusTrap3. (for 7.0 release)" REVISION "200712030153Z" DESCRIPTION "v3.6.3: Obsoleted one object: rbtwsApPortOrDapNum (previously deprecated). This will be published in 7.0 release." REVISION "200711150152Z" DESCRIPTION "v3.6.2: Added three new traps: rbtwsApManagerChangeTrap, rbtwsClientClearedTrap2, rbtwsMobilityDomainResiliencyStatusTrap, related TCs and objects: RbtwsApMgrChangeReason, rbtwsApMgrChangeReason, rbtwsApMgrOldIp, rbtwsApMgrNewIp, rbtwsClientSessionElapsedSeconds, RbtwsClientClearedReason, rbtwsClientClearedReason, RbtwsMobilityDomainResiliencyStatus, rbtwsMobilityDomainResiliencyStatus. Obsoleted one trap: rbtwsClientClearedTrap, and related object: rbtwsClientSessionElapsedTime. (for 7.0 release)" REVISION "200711010145Z" DESCRIPTION "v3.5.5: Added new trap: rbtwsClientAuthorizationSuccessTrap3, related TC and objects: RbtwsClientAuthorizationReason rbtwsClientAuthorizationReason, rbtwsClientAccessMode, rbtwsPhysPortNum. Obsoletes rbtwsClientAuthorizationSuccessTrap, rbtwsClientAuthorizationSuccessTrap2. (for 6.2 release)" REVISION "200710010141Z" DESCRIPTION "v3.5.1: Cleaned up object (rbtwsAPAccessType). Marked it as obsolete, because instrumentation code for traps using it was removed long time ago. (This will be published in 6.2 release.)" REVISION "200708310140Z" DESCRIPTION "v3.5.0: Corrected rbtwsClientMACAddress2 SYNTAX: its value was always a MacAddress, not an arbitrary 'OCTET STRING (SIZE (6))'. There is no change on the wire, just a more appropriate DISPLAY-HINT." REVISION "200708240122Z" DESCRIPTION "v3.3.2: Added new trap: rbtwsMichaelMICFailure, related TC and object: RbtwsMichaelMICFailureCause, rbtwsMichaelMICFailureCause. Obsoletes rbtwsMpMichaelMICFailure, rbtwsMpMichaelMICFailure2. (for 6.2 release)" REVISION "200707060110Z" DESCRIPTION "v3.2.0: Redesigned the AP Status traps. - Replaced rbtwsApAttachType and rbtwsApPortOrDapNum with a single varbinding, rbtwsApNum. - Added varbinding rbtwsRadioMode to the AP Operational - Radio Status trap. The new traps are rbtwsApNonOperStatusTrap2, rbtwsApOperRadioStatusTrap2. (for 6.2 release)" REVISION "200706050107Z" DESCRIPTION "v3.1.2: Obsoleted one trap: rbtwsRFDetectUnAuthorizedAPTrap (for 6.2 release)" REVISION "200705170106Z" DESCRIPTION "v3.1.1: Added new trap: rbtwsConfigurationSavedTrap and related objects: rbtwsConfigSaveFileName, rbtwsConfigSaveInitiatorType, rbtwsConfigSaveInitiatorIp, rbtwsConfigSaveInitiatorDetails, rbtwsConfigSaveGeneration. (for 6.2 release)" REVISION "200705040103Z" DESCRIPTION "v3.0.1: added one value (3) to RbtwsClientIpAddrChangeReason" REVISION "200704190100Z" DESCRIPTION "v3.0.0: Added six new traps: rbtwsRFDetectRogueDeviceTrap, rbtwsRFDetectRogueDeviceDisappearTrap, rbtwsRFDetectSuspectDeviceTrap, rbtwsRFDetectSuspectDeviceDisappearTrap, rbtwsRFDetectClientViaRogueWiredAPTrap3, rbtwsRFDetectClassificationChangeTrap and related object: rbtwsRFDetectClassificationReason. Obsoleted seven traps: rbtwsRFDetectRogueAPTrap, rbtwsRFDetectRogueDisappearTrap, rbtwsRFDetectInterferingRogueAPTrap, rbtwsRFDetectInterferingRogueDisappearTrap, rbtwsRFDetectUnAuthorizedSsidTrap, rbtwsRFDetectUnAuthorizedOuiTrap, rbtwsRFDetectClientViaRogueWiredAPTrap2. (for 6.2 release)" REVISION "200703270054Z" DESCRIPTION "v2.9.2: added three values (13, 14, 15) to RbtwsAuthorizationFailureType (for 6.2 release)" REVISION "200702150053Z" DESCRIPTION "v2.9.1: Cleaned up trap (rbtwsClientAuthorizationSuccessTrap) and object (rbtwsRadioRssi) deprecated long time ago. Marked them as obsolete, because instrumentation code was removed already. (This will be published in 6.2 release.)" REVISION "200701090052Z" DESCRIPTION "v2.9.0: Added two textual conventions: RbtwsUserAttributeList, RbtwsSessionDisconnectType three new traps: rbtwsClientDynAuthorChangeSuccessTrap, rbtwsClientDynAuthorChangeFailureTrap, rbtwsClientDisconnectTrap and related objects: rbtwsClientDynAuthorClientIp, rbtwsChangedUserParamOldValues, rbtwsChangedUserParamNewValues, rbtwsClientDisconnectSource, rbtwsClientDisconnectDescription (for 6.2 release)" REVISION "200701090051Z" DESCRIPTION "v2.8.5: added one value (24) to RbtwsRFDetectDoSType (for 6.2 release)" REVISION "200701090050Z" DESCRIPTION "v2.6.4: Added two new traps: rbtwsMobilityDomainFailOverTrap, rbtwsMobilityDomainFailBackTrap and related objects: rbtwsMobilityDomainSecondarySeedIp, rbtwsMobilityDomainPrimarySeedIp (for 6.0 release)" REVISION "200609280045Z" DESCRIPTION "v2.6.2: Factored out four textual conventions into a new module, Client Session TC: RbtwsClientSessionState, RbtwsClientAuthenProtocolType, RbtwsClientDot1xState, RbtwsUserAccessType and imported them from there." REVISION "200608080042Z" DESCRIPTION "v2.5.2: Added new trap: rbtwsApRejectLicenseExceededTrap and related object: rbtwsNumLicensedActiveAPs (for 6.0 release)" REVISION "200607310040Z" DESCRIPTION "v2.5.0: Added new trap: rbtwsRFDetectAdhocUserDisappearTrap (for 6.0 release)" REVISION "200607280032Z" DESCRIPTION "v2.4.7: Removed unused imports" REVISION "200607230029Z" DESCRIPTION "v2.4.1: Added new trap: rbtwsRFDetectBlacklistedTrap, related textual convention: RbtwsBlacklistingCause and objects: rbtwsBlacklistingRemainingTime, rbtwsBlacklistingCause (for 6.0 release)" REVISION "200607120028Z" DESCRIPTION "v2.4.0: Added new trap: RFDetectClientViaRogueWiredAPTrap2 and related object: rbtwsRFDetectRogueAPMacAddr. This trap obsoletes the RFDetectClientViaRogueWiredAPTrap (for 6.0 release)" REVISION "200607070026Z" DESCRIPTION "v2.3.1: Added 3 new traps: rbtwsClientAssociationSuccessTrap, rbtwsClientAuthenticationSuccessTrap, rbtwsClientDeAuthenticationTrap (for 6.0 release)" REVISION "200607070025Z" DESCRIPTION "v2.3.0: Added new trap: rbtwsClientIpAddrChangeTrap and related object: RbtwsClientIpAddrChangeReason (for 6.0 release)" REVISION "200607060023Z" DESCRIPTION "v2.2.0: added two values (13, 14) to RbtwsAuthenticationFailureType (for 6.0 release)" REVISION "200604190022Z" DESCRIPTION "v2.1.6: Updated client connection failure causes and descriptions (for 5.0 release)" REVISION "200604190021Z" DESCRIPTION "v2.0.6: Revised for 4.1 release" REVISION "200501010000Z" DESCRIPTION "v1: initial version, as for 4.0 and older releases" ::= { rbtwsMibs 1 } -- Branch for notifications rbtwsTrapsV2 OBJECT IDENTIFIER ::= { rbtwsTraps 0 } -- Textual Conventions RbtwsAssociationFailureType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons for an AP to fail a client's 802.11 association" SYNTAX INTEGER { other (1), load-balance (2), quiet-period (3), dot1x (4), no-prev-assoc (5), glare (6), cipher-rejected (7), cipher-mismatch (8), wep-not-configured (9), bad-assoc-request (10), out-of-memory (11), tkip-cm-active (12), roam-in-progress (13) } RbtwsAuthenticationFailureType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons for AAA authentication to fail user-glob-mismatch - auth rule/user not found for console login user-does-not-exist - login failed because user not found invalid-password - login failed because of invalid password server-timeout - unable to contact a AAA server signature-failed - incorrect password for mschapv2 local-certificate-error - certificate error all-servers-down - unable to contact any AAA server in the group authentication-type-mismatch - client and switch are using different authentication methods server-rejected - received reject from AAA server fallthru-auth-misconfig - problem with fallthru authentication no-lastresort-auth - problem with last-resort authentication exceeded-max-attempts - local user failed to login within allowed number of attempts resulting in account lockout password-expired - user's password expired" SYNTAX INTEGER { other (1), user-glob-mismatch (2), user-does-not-exist (3), invalid-password (4), server-timeout (5), signature-failed (6), local-certificate-error (7), all-servers-down (8), authentication-type-mismatch (9), server-rejected (10), fallthru-auth-misconfig (11), no-lastresort-auth (12), exceeded-max-attempts (13), password-expired (14) } RbtwsAuthorizationFailureType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons for AAA authorization failure" SYNTAX INTEGER { other (1), user-param (2), location-policy (3), vlan-tunnel-failure (4), ssid-mismatch (5), acl-mismatch (6), timeofday-mismatch (7), crypto-type-mismatch(8), mobility-profile-mismatch(9), start-date-mismatch (10), end-date-mismatch (11), svr-type-mismatch (12), ssid-defaults (13), qos-profile-mismatch (14), simultaneous-logins (15) } RbtwsDot1xFailureType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the dot1x failure reasons. quiet-period occurs when client is denied access for a period of time after a failed connection attempt administrative-kill means that the session was cleared using the 'clear dot1x client' command bad-rsnie means that client sent an invalid IE timeout is when there are excessive retransmissions max-sessions-exceeded means the maximum allowed wired clients has been exceeded on the switch fourway-hs-failure is for failures occuring the 4-way key handshake user-glob-mismatch means the name received in the dot1x identity request does not match any configured userglobs in the system reauth-disabled means that the client is trying to reauthenticate but reauthentication is disabled gkhs-failure means that either there was no response from the client during the GKHS or the response did not have an IE force-unauth-configured means that the client is trying to connect through a port which is configured as force-unauth cert-not-installed means that there is no certificate installed on the switch" SYNTAX INTEGER { other (1), quiet-period (2), administrative-kill (3), bad-rsnie (4), timeout (5), max-sessions-exceeded(6), fourway-hs-failure (7), user-glob-mismatch (8), bonded-auth-failure (9), reauth-disabled (10), gkhs-failure (11), force-unauth-configured (12), cert-not-installed (13) } RbtwsRFDetectDoSType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The types of denial of service (DoS) attacks" SYNTAX INTEGER { probe-flood(1), auth-flood(2), null-data-flood(3), mgmt-6-flood(4), mgmt-7-flood(5), mgmt-d-flood(6), mgmt-e-flood(7), mgmt-f-flood(8), fakeap-ssid(9), fakeap-bssid(10), bcast-deauth(11), null-probe-resp(12), disassoc-spoof(13), deauth-spoof(14), decrypt-err(15), weak-wep-iv(16), wireless-bridge(17), netstumbler(18), wellenreiter(19), adhoc-client-frame(20), associate-pkt-flood(21), re-associate-pkt-flood(22), de-associate-pkt-flood(23), bssid-spoof(24) } RbtwsClientIpAddrChangeReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the reasons for client IP address changes: client-connected: IP address assigned on initial connection; other: IP address changed after initial connection; dhcp-to-static: erroneous condition where client IP address is changed to a static address while the dhcp-restrict option is enabled." SYNTAX INTEGER { client-connected(1), other(2), dhcp-to-static(3) } RbtwsBlacklistingCause ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of reasons for blacklisting a transmitter: bl-configured: administrative action (explicitly added to the Black List), bl-associate-pkt-flood: Association request flood detected, bl-re-associate-pkt-flood: Re-association request flood detected, bl-de-associate-pkt-flood: De-association request flood detected. (The leading 'bl-' stands for 'Black-Listed'; reading it as 'Blocked' would also make sense)." SYNTAX INTEGER { bl-configured(1), bl-associate-pkt-flood(2), bl-re-associate-pkt-flood(3), bl-de-associate-pkt-flood(4) } RbtwsUserAttributeList ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Display string listing AAA attributes and their values. These strings can be used, for example, in change of authorization notifications. The syntax is: attribute_name1=value1, attribute_name2=value2, ... where attribute_name can be one of the following: vlan-name, in-acl, out-acl, mobility-prof, time-of-day, end-date, sess-timeout, acct-interval, service-type. Example: vlan-name=red, in-acl=in_acl_1" SYNTAX DisplayString (SIZE (0..2048)) RbtwsSessionDisconnectType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the sources that can initiate the termination of a session: admin-disconnect: session terminated by administrative action (from console, telnet session, WebView, or RASM). dyn-auth-disconnect: session terminated by dynamic authorization client; description will have the IP address of the dynamic authorization client which sent the request." SYNTAX INTEGER { other (1), admin-disconnect (2), dyn-auth-disconnect (3) } RbtwsConfigSaveInitiatorType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the sources that can initiate a configuration save: cli-console: configuration save requested from serial console administrative session. cli-remote: configuration save requested from telnet or ssh administrative session. https: configuration save requested via HTTPS API (RASM or WebView). snmp-set: configuration saved as a result of performing a SNMP SET operation." SYNTAX INTEGER { other (1), cli-console (2), cli-remote (3), https (4), snmp-set (5) } RbtwsMichaelMICFailureCause ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Describes the cause/source of Michael MIC Failure detection." SYNTAX INTEGER { detected-by-ap (1), detected-by-client (2) } RbtwsClientAuthorizationReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons for AAA authorization." SYNTAX INTEGER { other (1), new-client (2), re-auth (3), roam (4) } RbtwsApMgrChangeReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons why AP is switching to its secondary link: failover: AP's primary link failed. load-balancing: AP's primary link is overloaded." SYNTAX INTEGER { other (1), failover (2), load-balancing (3) } RbtwsClientClearedReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons for clearing a session: normal: Session was cleared from the switch as the last step in the normal session termination process. backup-failure: The backup switch could not activate a session from a failed MX." SYNTAX INTEGER { other (1), normal (2), backup-failure (3) } RbtwsMobilityDomainResiliencyStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the current resilient capacity status for a mobility domain: resilient: Every AP in the mobility domain has a secondary backup link. If the primary switch of an AP failed, the AP and its sessions would fail over to its backup link. degraded: Some APs only have a primary link. If the primary switch of an AP without a backup link failed, the AP would reboot and its sessions would be lost." SYNTAX INTEGER { other (1), resilient (2), degraded (3) } RbtwsClusterFailureReason ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Enumeration of the reasons why the AC goes into cluster failure state: validation-error: Cluster configuration rejected due to validation error." SYNTAX INTEGER { other (1), validation-error (2) } -- Object definitions rbtwsDeviceId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Enumeration of devices as indicated in registration MIB. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 1 } rbtwsMobilityDomainIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP address of the other switch which the send switch is reporting on. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 2 } rbtwsAPMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MAC address of the AP of interest. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 3 } rbtwsClientMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MAC address of the client of interest. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 4 } rbtwsRFDetectXmtrMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Describes the transmitter's MAC address. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 5 } rbtwsPortNum OBJECT-TYPE SYNTAX INTEGER (1..22) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Port number on the AC which reported this rogue during a detection sweep. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 6 } rbtwsAPRadioNum OBJECT-TYPE SYNTAX RbtwsRadioNum MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Radio number of the AP which reported this rogue during a detection sweep. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 7 } rbtwsRadioRssi OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The received signal strength as measured by the AP radio which reported this rogue during a detection sweep. This object is used within notifications and is not accessible. Not used by any notification." ::= { rbtwsTemporary 8 } rbtwsRadioBSSID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (6)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The basic service set identifier of the rogue from the beacon frame reported by the AP during a detection sweep. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 9 } rbtwsUserName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client user name as learned from the AAA process. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 10 } rbtwsClientAuthServerIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client authentication server ip address. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 11 } rbtwsClientSessionState OBJECT-TYPE SYNTAX RbtwsClientSessionState MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state for a client session. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 12 } rbtwsDAPNum OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The DAP number on the wireless switch. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 13 } rbtwsClientIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client ip address. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 14 } rbtwsClientSessionId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique global id for a client session. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 15 } rbtwsClientAuthenProtocolType OBJECT-TYPE SYNTAX RbtwsClientAuthenProtocolType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The authentication protocol for a client. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 16 } rbtwsClientVLANName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The vlan name a client is on. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 17 } rbtwsClientSessionStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The start time of a client session, relative to the sysUptime. This object is used within notifications and is not accessible. Obsolete. Do not use it because it's not vital information and often *cannot* be implemented to match the declared semantics: a client session might have been created on another wireless switch, *before* the current switch booted (the local zero of sysUptime)." ::= { rbtwsTemporary 18 } rbtwsClientFailureCause OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Display string for possible failure cause for a client session. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 19 } rbtwsClientRoamedFromPortNum OBJECT-TYPE SYNTAX INTEGER (1..20) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The port number on the AC a client has roamed from. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 20 } rbtwsClientRoamedFromRadioNum OBJECT-TYPE SYNTAX RbtwsRadioNum MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The radio number of the AP the client is roamed from. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 21 } rbtwsClientRoamedFromDAPNum OBJECT-TYPE SYNTAX INTEGER (1..100) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The DAP number on the AC which reported this rogue during roam. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 22 } rbtwsUserParams OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A display string of User Parameters for client user authorization attributes learned through AAA and/or used by the system. Note that the syntax will be (name=value, name=value,..) for the parsing purpose. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 23 } rbtwsClientLocationPolicyIndex OBJECT-TYPE SYNTAX INTEGER (0..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Index of the Location Policy rule applied to a user. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 24 } rbtwsClientAssociationFailureCause OBJECT-TYPE SYNTAX RbtwsAssociationFailureType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client association failure cause. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 25 } rbtwsClientAuthenticationFailureCause OBJECT-TYPE SYNTAX RbtwsAuthenticationFailureType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client authentication failure cause. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 26 } rbtwsClientAuthorizationFailureCause OBJECT-TYPE SYNTAX RbtwsAuthorizationFailureType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client authorization failure cause. Note that if it is the user-param, we would additionally expect the failure cause description to list the user attribute value that caused the failure. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 27 } rbtwsClientFailureCauseDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Display string for describing the client failure cause. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 28 } rbtwsClientRoamedFromWsIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The system IP address of the AC (wireless switch) a client roamed from. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 29 } rbtwsClientRoamedFromAccessType OBJECT-TYPE SYNTAX RbtwsAccessType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client access type (ap, dap, wired) that a client roamed from. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 30 } rbtwsClientAccessType OBJECT-TYPE SYNTAX RbtwsAccessType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client access type (ap, dap, wired). This object is used within notifications and is not accessible. For new traps, use rbtwsClientAccessMode instead of this object." ::= { rbtwsTemporary 31 } rbtwsRadioMACAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "AP Radio MAC address. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 32 } rbtwsRadioPowerChangeReason OBJECT-TYPE SYNTAX RbtwsRadioPowerChangeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of event that caused an AP radio power change; occurs due to auto-tune operation. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 33 } rbtwsNewChannelNum OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "New channel number of the AP radio used after an auto tune event. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 34 } rbtwsOldChannelNum OBJECT-TYPE SYNTAX INTEGER (1..1024) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Old channel number of the AP radio used before an auto tune event. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 35 } rbtwsChannelChangeReason OBJECT-TYPE SYNTAX RbtwsChannelChangeType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of event that caused an AP radio channel change; occurs due to auto-tune operation. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 36 } rbtwsRFDetectListenerListInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..571)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The RF Detection Listener list info including a list of (listener mac, rssi, channel, ssid, time). There will be a maximum of 6 entries in the list. Formats: MAC: 18 bytes: %2.2X:%2.2X:%2.2X:%2.2X:%2.2X:%2.2X RSSI: 10 bytes: %10d CHANNEL: 3 bytes: %3d SSID: 32 bytes: %s TIME: 26 bytes: %s Maximum size per entry is 89+4+2 = 95 bytes. Maximum size of the string is 6*95= 571 bytes (include NULL). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 37 } rbtwsRadioSSID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The radio SSID string This object is used within notifications and is not accessible." ::= { rbtwsTemporary 38 } rbtwsNewPowerLevel OBJECT-TYPE SYNTAX RbtwsPowerLevel MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "New power level of the AP radio used after an auto tune event. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 39 } rbtwsOldPowerLevel OBJECT-TYPE SYNTAX RbtwsPowerLevel MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Old power level of the AP radio used before an auto tune event. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 40 } rbtwsRadioPowerChangeDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The radio power change description. In the case of reason being dup-pkts-threshold-exceed(1), and retransmit-threshold-exceed(2), clientMacAddress will be included in the description. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 41 } rbtwsCounterMeasurePerformerListInfo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "A list of information for APs performing Counter Measures including a list of performer mac addresses. This object is used within notifications and is not accessible. Not used by any notification." ::= { rbtwsTemporary 42 } rbtwsClientDot1xState OBJECT-TYPE SYNTAX RbtwsClientDot1xState MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The state for a client 802.1X. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 43 } rbtwsClientDot1xFailureCause OBJECT-TYPE SYNTAX RbtwsDot1xFailureType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client 802.1X failure cause. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 44 } rbtwsAPAccessType OBJECT-TYPE SYNTAX RbtwsAccessType MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The access point access type (ap, dap,). This object is used within notifications and is not accessible. Not used by any notification." ::= { rbtwsTemporary 45 } rbtwsUserAccessType OBJECT-TYPE SYNTAX RbtwsUserAccessType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The user access type (MAC, WEB, DOT1X, LAST-RESORT). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 46} rbtwsClientSessionElapsedTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The elapsed time for a client session. Obsoleted because session time is usually reported in seconds. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 47 } rbtwsLocalId OBJECT-TYPE SYNTAX INTEGER (1..65000) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Local Id for the session. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 48 } rbtwsRFDetectDoSType OBJECT-TYPE SYNTAX RbtwsRFDetectDoSType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of denial of service (DoS) attack. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 49 } rbtwsSourceWsIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "IP address of another AC (wireless switch). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 50 } rbtwsClientVLANid OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VLAN ID used by client traffic. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 51 } rbtwsClientVLANtag OBJECT-TYPE SYNTAX INTEGER (0..4095) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "VLAN tag used by client traffic. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 52 } rbtwsDeviceModel OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The model of a device in printable US-ASCII. If unknown (or not available), then the value is a zero length string. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 53 } -- -- Notes for MIB designers/maintainers: -- -- Define a new object type for each kind of device (other than AP) -- if your new traps need to identify such devices by serial number. -- Use 'rbtwsDeviceSerNum' only to identify APs! -- rbtwsDeviceSerNum OBJECT-TYPE SYNTAX RbtwsApSerialNum MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The serial number of an AP in printable US-ASCII. If unknown (or not available), then the value is a zero length string. Should NOT be used to identify other devices, for example an AC (wireless switch). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 54 } rbtwsRsaPubKeyFingerPrint OBJECT-TYPE SYNTAX RbtwsApFingerprint MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The hash of the RSA public key (of a key pair) in binary form that uniquely identifies the public key of an AP. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 55 } rbtwsDAPconnectWarningType OBJECT-TYPE SYNTAX INTEGER { not-configured-fingerprint-connect(1), secure-handshake-failure(2), not-configured-fingerprint-required(3), fingerprint-mismatch(4) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The type of DAP connect warning. The values are: not-configured-fingerprint-connect(1)...a DAP, which has an RSA keypair but did not have its fingerprint configured on the AC, has connected to the AC when 'dap security' set to 'OPTIONAL' secure-handshake-failure(2).............a DAP tried to connect to the AC with security, but the handshake failed not-configured-fingerprint-required(3)..a DAP tried to connect to the AC with security, but 'dap security' set to 'REQUIRED', and no fingerprint was configured for the DAP fingerprint-mismatch(4).................a DAP tried to connect to the AC with security and its fingerprint was configured, but the fingerprint did not match the computed one This object is used within notifications and is not accessible." ::= { rbtwsTemporary 56 } rbtwsClientMACAddress2 OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "MAC address of the second client of interest. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 57 } rbtwsApAttachType OBJECT-TYPE SYNTAX RbtwsApAttachType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "How the AP is attached to the AC (directly or via L2/L3 network). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 58 } rbtwsApPortOrDapNum OBJECT-TYPE SYNTAX RbtwsApPortOrDapNum MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The Port Number if the AP is directly attached, or the CLI-assigned DAP Number if attached via L2/L3 network. This object is used within notifications and is not accessible. Obsoleted by rbtwsApNum. (In 6.0, direct- and network-attached APs were unified.)" ::= { rbtwsTemporary 59 } rbtwsApName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The name of the AP, as assigned in AC's CLI; defaults to AP (examples: 'AP01', 'AP22', 'AP333', 'AP4444'); could have been changed from CLI to a meaningful name, for example the location of the AP (example: 'MeetingRoom73'). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 60 } rbtwsApTransition OBJECT-TYPE SYNTAX RbtwsApTransition MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "AP state Transition, as seen by the AC. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 61 } rbtwsApFailDetail OBJECT-TYPE SYNTAX RbtwsApFailDetail MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Detailed failure code for some of the transitions specified in 'rbtwsApTransition' object. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 62 } rbtwsRadioType OBJECT-TYPE SYNTAX RbtwsRadioType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the AP Radio Type, as seen by AC. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 63 } rbtwsRadioConfigState OBJECT-TYPE SYNTAX RbtwsRadioConfigState MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the Radio State, as seen by the AC. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 64 } rbtwsApConnectSecurityType OBJECT-TYPE SYNTAX RbtwsApConnectSecurityType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the security level of the connection between AP and AC. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 65 } rbtwsApServiceAvailability OBJECT-TYPE SYNTAX RbtwsApServiceAvailability MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the level of wireless service availability. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 66 } rbtwsApWasOperational OBJECT-TYPE SYNTAX RbtwsApWasOperational MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates whether the AP was operational before a transition occured. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 67 } rbtwsClientTimeSinceLastRoam OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The time in seconds since the most recent roam of a given client. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 68 } rbtwsClientIpAddrChangeReason OBJECT-TYPE SYNTAX RbtwsClientIpAddrChangeReason MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason why client IP address changed. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 69 } rbtwsRFDetectRogueAPMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Describes the MAC address of the Rogue AP the transmitter is connected to. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 70 } rbtwsBlacklistingRemainingTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The time in seconds remaining until a given transmitter could be removed from the Black List. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 71 } rbtwsBlacklistingCause OBJECT-TYPE SYNTAX RbtwsBlacklistingCause MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason why a given transmitter is blacklisted. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 72 } rbtwsNumLicensedActiveAPs OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the maximum (licensed) number of active APs for this AC. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 73 } rbtwsClientDynAuthorClientIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The dynamic authorization client IP address which caused the change of authorization. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 74 } rbtwsChangedUserParamOldValues OBJECT-TYPE SYNTAX RbtwsUserAttributeList MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A display string listing the changed AAA attributes and their values, before the change of authorization was executed. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 75 } rbtwsChangedUserParamNewValues OBJECT-TYPE SYNTAX RbtwsUserAttributeList MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "A display string listing the changed AAA attributes and their values, after the change of authorization was executed. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 76 } rbtwsClientDisconnectSource OBJECT-TYPE SYNTAX RbtwsSessionDisconnectType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The external source that initiated the termination of a session. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 77 } rbtwsClientDisconnectDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Display string for providing available information related to the external source that initiated a session termination. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 78 } rbtwsMobilityDomainSecondarySeedIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The secondary seed IP address to which the Mobility Domain has failed over. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 79 } rbtwsMobilityDomainPrimarySeedIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The primary seed IP address to which the Mobility Domain has failed back. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 80 } rbtwsRFDetectClassificationReason OBJECT-TYPE SYNTAX RbtwsRFDetectClassificationReason MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason why a RF device is classified the way it is. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 81 } rbtwsConfigSaveFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Display string listing the name of the file to which the running configuration was saved. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 82 } rbtwsConfigSaveInitiatorType OBJECT-TYPE SYNTAX RbtwsConfigSaveInitiatorType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the source that initiated a configuration save. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 83 } rbtwsConfigSaveInitiatorIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address of the source that initiated a configuration save. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 84 } rbtwsConfigSaveInitiatorDetails OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Display string listing additional information regarding the source that initiated a configuration save, when available. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 85 } rbtwsConfigSaveGeneration OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the number of configuration changes since the last system boot. The generation count is used to track the number of times the running configuration has been changed due to administrative actions (set/clear), SNMP requests (SET), XML requests (e.g. RASM). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 86 } rbtwsApNum OBJECT-TYPE SYNTAX RbtwsApNum MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The administratively assigned AP Number, unique on same AC (switch), regardless of how APs are attached to the AC. This object is used within notifications and is not accessible. Obsoletes rbtwsApPortOrDapNum. For clarity, use this object to identify an AP since in 6.0 directly attached APs and DAPs were unified." ::= { rbtwsTemporary 87 } rbtwsRadioMode OBJECT-TYPE SYNTAX RbtwsRadioMode MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the administratively controlled Radio Mode (enabled/disabled/sentry). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 88 } rbtwsMichaelMICFailureCause OBJECT-TYPE SYNTAX RbtwsMichaelMICFailureCause MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the Michael MIC Failure cause / who detected it. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 89 } rbtwsClientAccessMode OBJECT-TYPE SYNTAX RbtwsClientAccessMode MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The client access mode (ap, wired). This object is used within notifications and is not accessible. Intended to replace rbtwsClientAccessType. (In 6.0, direct- and network-attached APs were unified.)" ::= { rbtwsTemporary 90 } rbtwsClientAuthorizationReason OBJECT-TYPE SYNTAX RbtwsClientAuthorizationReason MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason why client performed AAA authorization. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 91 } rbtwsPhysPortNum OBJECT-TYPE SYNTAX Unsigned32 (0..1024) -- see RbtwsPhysPortNumber from rbtwsPortMib MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Physical Port Number on the AC. Zero means the port is unknown or not applicable (for example, when rbtwsClientAccessMode = 'ap'). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 92 } rbtwsApMgrOldIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address of the AP's former primary manager switch. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 93 } rbtwsApMgrNewIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The IP address of the AP's new primary manager switch. This address was formerly the AP's secondary backup link. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 94 } rbtwsApMgrChangeReason OBJECT-TYPE SYNTAX RbtwsApMgrChangeReason MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason why the AP's primary manager changed. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 95 } rbtwsClientClearedReason OBJECT-TYPE SYNTAX RbtwsClientClearedReason MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason why client was cleared. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 96 } rbtwsMobilityDomainResiliencyStatus OBJECT-TYPE SYNTAX RbtwsMobilityDomainResiliencyStatus MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the current resilient capacity status for a mobility domain. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 97 } rbtwsClientSessionElapsedSeconds OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the time in seconds elapsed since the start of the Client Session. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 98 } rbtwsRadioChannelWidth OBJECT-TYPE SYNTAX RbtwsRadioChannelWidth MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the administratively controlled Channel Width (20MHz/40MHz). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 99 } rbtwsRadioMimoState OBJECT-TYPE SYNTAX RbtwsRadioMimoState MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the Radio MIMO State, as seen by the AC (1x1/2x3/3x3). This object is used within notifications and is not accessible." ::= { rbtwsTemporary 100 } rbtwsClientRadioType OBJECT-TYPE SYNTAX RbtwsRadioType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the Client Radio Type, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 101 } rbtwsRFDetectXmtrRadioType OBJECT-TYPE SYNTAX RbtwsRadioType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the Radio Type of the Transmitter, as detected by an attached AP and reported to the AC. The Transmitter may be a wireless client or an AP. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 102 } rbtwsRFDetectXmtrCryptoType OBJECT-TYPE SYNTAX RbtwsCryptoType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the Crypto Type used by the Transmitter, as detected by an attached AP and reported to the AC. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 103 } rbtwsClusterFailureReason OBJECT-TYPE SYNTAX RbtwsClusterFailureReason MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Indicates the reason why cluster configuration failed to apply. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 104 } rbtwsClusterFailureDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Display string for describing the cluster configuration failure cause. This object is used within notifications and is not accessible." ::= { rbtwsTemporary 105 } -- Notification definitions rbtwsDeviceFailTrap NOTIFICATION-TYPE OBJECTS { rbtwsDeviceId } STATUS current DESCRIPTION "The device has a failure indication" ::= { rbtwsTrapsV2 1 } rbtwsDeviceOkayTrap NOTIFICATION-TYPE OBJECTS { rbtwsDeviceId } STATUS current DESCRIPTION "The device has recovered" ::= { rbtwsTrapsV2 2 } rbtwsPoEFailTrap NOTIFICATION-TYPE OBJECTS { rbtwsPortNum } STATUS current DESCRIPTION "PoE has failed on the indicated port" ::= { rbtwsTrapsV2 3 } rbtwsApTimeoutTrap NOTIFICATION-TYPE OBJECTS { rbtwsPortNum, rbtwsAPMACAddress, rbtwsAPAccessType, rbtwsDAPNum } STATUS obsolete DESCRIPTION "The AP entering the AC at port rbtwsPortNum with MAC rbtwsRadioMacAddress and of the access type (ap or dap) has not responded. Replaced by rbtwsApNonOperStatusTrap2, with rbtwsApTransition = 'timeout'." ::= { rbtwsTrapsV2 4 } rbtwsAPBootTrap NOTIFICATION-TYPE OBJECTS { rbtwsPortNum, rbtwsAPMACAddress, rbtwsAPAccessType, rbtwsDAPNum } STATUS obsolete DESCRIPTION "The AP entering the AC at port rbtwsPortNum with MAC rbtwsRadioMacAddress and of the access type (ap or dap) has booted. Replaced by rbtwsApNonOperStatusTrap2, with rbtwsApTransition = 'bootSuccess'." ::= { rbtwsTrapsV2 5 } rbtwsMobilityDomainJoinTrap NOTIFICATION-TYPE OBJECTS { rbtwsMobilityDomainIp } STATUS current DESCRIPTION "The mobility domain member has received an UP notice from the remote address." ::= { rbtwsTrapsV2 6 } rbtwsMobilityDomainTimeoutTrap NOTIFICATION-TYPE OBJECTS { rbtwsMobilityDomainIp } STATUS current DESCRIPTION "The mobility domain member has declared the remote address to be DOWN." ::= { rbtwsTrapsV2 7 } rbtwsMpMichaelMICFailure NOTIFICATION-TYPE OBJECTS { rbtwsPortNum, rbtwsRadioMACAddress, rbtwsRadioSSID, rbtwsAPRadioNum, rbtwsClientMACAddress, rbtwsClientMACAddress } STATUS obsolete DESCRIPTION "Two Michael MIC failures were seen within 60 seconds of each other. Obsoleted by rbtwsMichaelMICFailure." ::= { rbtwsTrapsV2 8 } rbtwsRFDetectRogueAPTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds a rogue AP. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2." ::= { rbtwsTrapsV2 9 } rbtwsRFDetectAdhocUserTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS current DESCRIPTION "This trap is sent when RF detection sweep finds a ad-hoc user. rbtwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user. rbtwsRFDetectListenerListInfo is a display string of a list of listener information." ::= { rbtwsTrapsV2 10 } rbtwsRFDetectRogueDisappearTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr } STATUS obsolete DESCRIPTION "This trap is sent when a rogue has disappeared. Obsoleted by rbtwsRFDetectRogueDeviceDisappearTrap." ::= { rbtwsTrapsV2 11 } rbtwsClientAuthenticationFailureTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsClientAuthenticationFailureCause, rbtwsClientFailureCauseDescription } STATUS current DESCRIPTION "This trap is sent if a client authentication fails." ::= { rbtwsTrapsV2 12 } rbtwsClientAuthorizationFailureTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsClientLocationPolicyIndex, rbtwsUserParams, rbtwsClientAuthorizationFailureCause, rbtwsClientFailureCauseDescription } STATUS current DESCRIPTION "This trap is sent if a client authorization fails." ::= { rbtwsTrapsV2 13 } rbtwsClientAssociationFailureTrap NOTIFICATION-TYPE OBJECTS { rbtwsClientMACAddress, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsClientAssociationFailureCause, rbtwsClientFailureCauseDescription } STATUS current DESCRIPTION "This trap is sent if a client association fails." ::= { rbtwsTrapsV2 14 } rbtwsClientAuthorizationSuccessTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientVLANName, rbtwsClientSessionState, rbtwsClientSessionStartTime, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsRadioRssi } STATUS obsolete DESCRIPTION "This trap is sent when a client authorizes. Obsoleted by rbtwsClientAuthorizationSuccessTrap4." ::= { rbtwsTrapsV2 15 } rbtwsClientDeAssociationTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientVLANName, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID } STATUS current DESCRIPTION "This trap is sent if a client de-association occurred." ::= { rbtwsTrapsV2 16 } rbtwsClientRoamingTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsClientRoamedFromAccessType, rbtwsClientRoamedFromPortNum, rbtwsClientRoamedFromRadioNum, rbtwsClientRoamedFromDAPNum, rbtwsClientRoamedFromWsIp, rbtwsClientTimeSinceLastRoam } STATUS current DESCRIPTION "This trap is sent if a client roams from one location to another." ::= { rbtwsTrapsV2 17 } rbtwsAutoTuneRadioPowerChangeTrap NOTIFICATION-TYPE OBJECTS { rbtwsRadioMACAddress, rbtwsNewPowerLevel, rbtwsOldPowerLevel, rbtwsRadioPowerChangeReason, rbtwsRadioPowerChangeDescription } STATUS current DESCRIPTION "This trap is sent if a radio's power level has changed based on auto-tune." ::= { rbtwsTrapsV2 18 } rbtwsAutoTuneRadioChannelChangeTrap NOTIFICATION-TYPE OBJECTS { rbtwsRadioMACAddress, rbtwsNewChannelNum, rbtwsOldChannelNum, rbtwsChannelChangeReason } STATUS current DESCRIPTION "This trap is sent if a radio's channel has changed based on auto-tune." ::= { rbtwsTrapsV2 19 } rbtwsCounterMeasureStartTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRadioMACAddress } STATUS current DESCRIPTION "This trap is sent when counter measures are started against a rogue. rbtwsRFDetectXmtrMacAddr is the mac address of the rogue we are doing counter measures against. rbtwsRadioMACAddress identifies the radio performing the countermeasures." ::= { rbtwsTrapsV2 20 } rbtwsCounterMeasureStopTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRadioMACAddress } STATUS current DESCRIPTION "This trap is sent when counter measures are stopped against a rogue. rbtwsRFDetectXmtrMacAddr is the mac address of the rogue we were doing counter measures against. rbtwsRadioMACAddress identifies the radio performing the countermeasures." ::= { rbtwsTrapsV2 21 } rbtwsClientDot1xFailureTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientMACAddress, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsDAPNum, rbtwsPortNum, rbtwsAPRadioNum, rbtwsRadioSSID, rbtwsClientDot1xState, rbtwsClientDot1xFailureCause, rbtwsClientFailureCauseDescription } STATUS current DESCRIPTION "This trap is sent if a client failed 802.1X." ::= { rbtwsTrapsV2 22 } rbtwsClientClearedTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsClientSessionElapsedTime, rbtwsLocalId} STATUS obsolete DESCRIPTION "This trap is sent when a client session is cleared. Obsoleted by rbtwsClientClearedTrap2." ::= { rbtwsTrapsV2 23 } rbtwsClientAuthorizationSuccessTrap2 NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientVLANName, rbtwsClientSessionState, rbtwsClientSessionStartTime, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsUserAccessType, rbtwsLocalId } STATUS obsolete DESCRIPTION "This trap is sent when a client authorizes. Obsoleted by rbtwsClientAuthorizationSuccessTrap4." ::= { rbtwsTrapsV2 24 } rbtwsRFDetectSpoofedMacAPTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds an AP using the MAC of the listener. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectDoSTrap and rbtwsRFDetectRogueDeviceTrap2. One of the two traps will be sent depending on the type of AP MAC spoofing detected." ::= { rbtwsTrapsV2 25 } rbtwsRFDetectSpoofedSsidAPTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds an AP using the SSID of the listener, and the AP is not in the mobility domain. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2 and rbtwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent, depending on RF detection classification rules." ::= { rbtwsTrapsV2 26 } rbtwsRFDetectDoSTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectDoSType, rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS current DESCRIPTION "This trap is sent when RF detection finds a denial of service (DoS) occurring. rbtwsRFDetectDoSType specifies the type of DoS. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information." ::= { rbtwsTrapsV2 27 } rbtwsRFDetectClientViaRogueWiredAPTrap NOTIFICATION-TYPE OBJECTS { rbtwsSourceWsIp, rbtwsPortNum, rbtwsClientVLANid, rbtwsClientVLANtag, rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. rbtwsSourceWsIp is the IP address of the AC (switch) with the wired port. rbtwsPortNum is the port on the AC. rbtwsClientVLANid is the VLAN ID of the client's traffic. rbtwsClientVLANtag is the VLAN tag of the client's traffic. rbtwsRFDetectXmtrMacAddr is the MAC address of the client. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectClientViaRogueWiredAPTrap3." ::= { rbtwsTrapsV2 28 } rbtwsRFDetectInterferingRogueAPTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds an interfering rogue AP. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectSuspectDeviceTrap2." ::= { rbtwsTrapsV2 29 } rbtwsRFDetectInterferingRogueDisappearTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr } STATUS obsolete DESCRIPTION "This trap is sent when an interfering rogue has disappeared. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. Obsoleted by rbtwsRFDetectSuspectDeviceDisappearTrap." ::= { rbtwsTrapsV2 30 } rbtwsRFDetectUnAuthorizedSsidTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds use of an unauthorized SSID. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2 and rbtwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized SSID is classified as rogue or suspect because of this." ::= { rbtwsTrapsV2 31 } rbtwsRFDetectUnAuthorizedOuiTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds use of an unauthorized OUI. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2 and rbtwsRFDetectSuspectDeviceTrap2. One of the two traps will be sent if the device having an unauthorized OUI is classified as rogue or suspect because of this." ::= { rbtwsTrapsV2 32 } rbtwsRFDetectUnAuthorizedAPTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds operation of an unauthorized AP. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. Obsoleted by rbtwsRFDetectRogueDeviceTrap2." ::= { rbtwsTrapsV2 33 } rbtwsDAPConnectWarningTrap NOTIFICATION-TYPE OBJECTS { rbtwsDeviceModel, rbtwsDeviceSerNum, rbtwsRsaPubKeyFingerPrint, rbtwsDAPconnectWarningType } STATUS obsolete DESCRIPTION "A DAP, tried to connect to the AC. rbtwsDeviceModel provides the model of the DAP. rbtwsDeviceSerNum provides the serial number of the DAP. rbtwsRsaPubKeyFingerPrint provides the computed fingerprint of the DAP. rbtwsDAPconnectWarningType provides the type of connect warning. Replaced by rbtwsApNonOperStatusTrap2, with rbtwsApTransition = 'connectFail'." ::= { rbtwsTrapsV2 34 } rbtwsRFDetectDoSPortTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectDoSType, rbtwsRFDetectXmtrMacAddr, rbtwsClientAccessType, rbtwsPortNum, rbtwsDAPNum } STATUS current DESCRIPTION "This trap is sent when RF detection finds a denial of service (DoS) occurring. This has port and AP info instead of 'Listener info'. rbtwsRFDetectDoSType specifies the type of DoS. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsClientAccessType specifies whether wired, AP, or DAP. rbtwsPortNum (for wired or AP), the port that is used. rbtwsDAPNum (for a DAP), the ID of the DAP." ::= { rbtwsTrapsV2 35 } rbtwsMpMichaelMICFailure2 NOTIFICATION-TYPE OBJECTS { rbtwsPortNum, rbtwsAPRadioNum, rbtwsClientMACAddress, rbtwsClientMACAddress2 } STATUS obsolete DESCRIPTION "Two Michael MIC failures were seen within 60 seconds of each other. Object rbtwsClientMACAddress is the source of the first failure, and object rbtwsClientMACAddress2 source of the second failure. Obsoleted by rbtwsMichaelMICFailure." ::= { rbtwsTrapsV2 36 } rbtwsApNonOperStatusTrap NOTIFICATION-TYPE OBJECTS { rbtwsDeviceSerNum, rbtwsAPMACAddress, rbtwsApAttachType, rbtwsApPortOrDapNum, rbtwsApName, rbtwsApTransition, rbtwsApFailDetail, rbtwsApWasOperational } STATUS obsolete DESCRIPTION "This trap is sent when the AP changes state and the new one is a non-operational state. Obsoleted by rbtwsApNonOperStatusTrap2." ::= { rbtwsTrapsV2 37 } rbtwsApOperRadioStatusTrap NOTIFICATION-TYPE OBJECTS { rbtwsDeviceSerNum, rbtwsApAttachType, rbtwsApPortOrDapNum, rbtwsApName, rbtwsAPRadioNum, rbtwsRadioMACAddress, rbtwsRadioType, rbtwsRadioConfigState, rbtwsApConnectSecurityType, rbtwsApServiceAvailability } STATUS obsolete DESCRIPTION "This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by rbtwsApOperRadioStatusTrap3." ::= { rbtwsTrapsV2 38 } rbtwsClientIpAddrChangeTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientVLANName, rbtwsClientSessionState, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsUserAccessType, rbtwsLocalId, rbtwsClientIpAddrChangeReason } STATUS current DESCRIPTION "This trap is sent when a client's IP address changes. The most likely case for this is when the client first connects to the network." ::= { rbtwsTrapsV2 39 } rbtwsClientAssociationSuccessTrap NOTIFICATION-TYPE OBJECTS { rbtwsClientMACAddress, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID } STATUS current DESCRIPTION "This trap is sent if a client association succeeds. WARNING: DO NOT enable it in normal use. It may impair switch performance! Only recommended for debugging network issues." ::= { rbtwsTrapsV2 40 } rbtwsClientAuthenticationSuccessTrap NOTIFICATION-TYPE OBJECTS { rbtwsClientMACAddress, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID } STATUS current DESCRIPTION "This trap is sent if a client authentication succeeds." ::= { rbtwsTrapsV2 41 } rbtwsClientDeAuthenticationTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientVLANName, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID } STATUS current DESCRIPTION "This trap is sent if a client de-authentication occured." ::= { rbtwsTrapsV2 42 } rbtwsRFDetectBlacklistedTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsClientAccessType, rbtwsPortNum, rbtwsDAPNum, rbtwsBlacklistingRemainingTime, rbtwsBlacklistingCause } STATUS current DESCRIPTION "This trap is sent if an association, re-association or de-association request (packet) is detected from a blacklisted transmitter (identified by MAC: 'rbtwsRFDetectXmtrMacAddr'). If 'rbtwsBlacklistingCause' is 'configured', then 'rbtwsBlacklistingRemainingTime' will be zero, meaning indefinite time (depending on administrative actions on the Black List). Otherwise, 'rbtwsBlacklistingRemainingTime' will indicate the time in seconds until this transmitter's requests could be allowed." ::= { rbtwsTrapsV2 43 } rbtwsRFDetectClientViaRogueWiredAPTrap2 NOTIFICATION-TYPE OBJECTS { rbtwsSourceWsIp, rbtwsPortNum, rbtwsClientVLANid, rbtwsClientVLANtag, rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo, rbtwsRFDetectRogueAPMacAddr } STATUS obsolete DESCRIPTION "This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. rbtwsSourceWsIp is the IP address of the AC (switch) with the wired port. rbtwsPortNum is the port on the AC. rbtwsClientVLANid is the VLAN ID of the client's traffic. rbtwsClientVLANtag is the VLAN tag of the client's traffic. rbtwsRFDetectXmtrMacAddr is the MAC address of the client. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. Obsoleted by rbtwsRFDetectClientViaRogueWiredAPTrap3." ::= { rbtwsTrapsV2 44 } rbtwsRFDetectAdhocUserDisappearTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr } STATUS current DESCRIPTION "This trap is sent when RF detection sweep finds that an ad-hoc user disappeared. rbtwsRFDetectXmtrMacAddr is the MAC address of the ad-hoc user." ::= { rbtwsTrapsV2 45 } rbtwsApRejectLicenseExceededTrap NOTIFICATION-TYPE OBJECTS { rbtwsNumLicensedActiveAPs } STATUS current DESCRIPTION "This trap is sent when an AC (wireless switch) receives a packet from an inactive AP and attaching that AP would make the AC exceed the maximum (licensed) number of active APs." ::= { rbtwsTrapsV2 46 } rbtwsClientDynAuthorChangeSuccessTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientSessionState, rbtwsClientDynAuthorClientIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsUserAccessType, rbtwsLocalId, rbtwsChangedUserParamOldValues, rbtwsChangedUserParamNewValues } STATUS current DESCRIPTION "This trap is sent when the authorization attributes for a user are dynamically changed by an authorized dynamic authorization client." ::= { rbtwsTrapsV2 47 } rbtwsClientDynAuthorChangeFailureTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientDynAuthorClientIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsUserParams, rbtwsClientAuthorizationFailureCause, rbtwsClientFailureCauseDescription } STATUS current DESCRIPTION "This trap is sent if a change of authorization request sent by an authorized dynamic authorization client is unsuccessful." ::= { rbtwsTrapsV2 48 } rbtwsClientDisconnectTrap NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientAccessType, rbtwsPortNum, rbtwsAPRadioNum, rbtwsDAPNum, rbtwsRadioSSID, rbtwsLocalId, rbtwsClientDisconnectSource, rbtwsClientDisconnectDescription } STATUS current DESCRIPTION "This trap is sent when a client session is terminated administratively." ::= { rbtwsTrapsV2 49 } rbtwsMobilityDomainFailOverTrap NOTIFICATION-TYPE OBJECTS { rbtwsMobilityDomainSecondarySeedIp } STATUS current DESCRIPTION "This trap is sent when the Mobility Domain fails over to the secondary seed." ::= { rbtwsTrapsV2 50 } rbtwsMobilityDomainFailBackTrap NOTIFICATION-TYPE OBJECTS { rbtwsMobilityDomainPrimarySeedIp } STATUS current DESCRIPTION "This trap is sent when the Mobility Domain fails back to the primary seed." ::= { rbtwsTrapsV2 51 } rbtwsRFDetectRogueDeviceTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo, rbtwsRFDetectClassificationReason } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds a rogue device. XmtrMacAddr is the radio MAC address from the beacon. ListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as rogue. Obsoleted by rbtwsRFDetectRogueDeviceTrap2." ::= { rbtwsTrapsV2 52 } rbtwsRFDetectRogueDeviceDisappearTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr } STATUS current DESCRIPTION "This trap is sent when a rogue device has disappeared. This trap obsoletes the rbtwsRFDetectRogueDisappearTrap." ::= { rbtwsTrapsV2 53 } rbtwsRFDetectSuspectDeviceTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo, rbtwsRFDetectClassificationReason } STATUS obsolete DESCRIPTION "This trap is sent when RF detection finds a suspect device. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. ClassificationReason indicates the reason why the device is classified as suspect. Obsoleted by rbtwsRFDetectSuspectDeviceTrap2." ::= { rbtwsTrapsV2 54 } rbtwsRFDetectSuspectDeviceDisappearTrap NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr } STATUS current DESCRIPTION "This trap is sent when a suspect device has disappeared. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. This trap obsoletes the rbtwsRFDetectInterferingRogueDisappearTrap." ::= { rbtwsTrapsV2 55 } rbtwsRFDetectClientViaRogueWiredAPTrap3 NOTIFICATION-TYPE OBJECTS { rbtwsSourceWsIp, rbtwsPortNum, rbtwsClientVLANid, rbtwsClientVLANtag, rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectListenerListInfo, rbtwsRFDetectRogueAPMacAddr, rbtwsRFDetectClassificationReason } STATUS current DESCRIPTION "This trap is sent when a client is detected that connected via a rogue AP that is attached to a wired port. rbtwsSourceWsIp is the IP address of the AC (switch) with the wired port. rbtwsPortNum is the port on the AC. rbtwsClientVLANid is the VLAN ID of the client's traffic. rbtwsClientVLANtag is the VLAN tag of the client's traffic. rbtwsRFDetectXmtrMacAddr is the MAC address of the client. rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectRogueAPMacAddr is the MAC address of the Rogue AP (wired) the client is connected to. ClassificationReason indicates the reason why the AP is classified as rogue. This trap obsoletes the rbtwsRFDetectClientViaRogueWiredAPTrap and rbtwsRFDetectClientViaRogueWiredAPTrap2." ::= { rbtwsTrapsV2 56 } rbtwsRFDetectClassificationChangeTrap NOTIFICATION-TYPE STATUS current DESCRIPTION "This trap is sent when RF detection classification rules change." ::= { rbtwsTrapsV2 57 } rbtwsConfigurationSavedTrap NOTIFICATION-TYPE OBJECTS { rbtwsConfigSaveFileName, rbtwsConfigSaveInitiatorType, rbtwsConfigSaveInitiatorIp, rbtwsConfigSaveInitiatorDetails, rbtwsConfigSaveGeneration } STATUS current DESCRIPTION "This trap is sent when the running configuration of the switch is written to a configuration file." ::= { rbtwsTrapsV2 58 } rbtwsApNonOperStatusTrap2 NOTIFICATION-TYPE OBJECTS { rbtwsDeviceSerNum, rbtwsAPMACAddress, rbtwsApNum, rbtwsApName, rbtwsApTransition, rbtwsApFailDetail, rbtwsApWasOperational } STATUS current DESCRIPTION "This trap is sent when the AP changes state and the new one is a non-operational state. Obsoletes rbtwsApNonOperStatusTrap." ::= { rbtwsTrapsV2 59 } rbtwsApOperRadioStatusTrap2 NOTIFICATION-TYPE OBJECTS { rbtwsDeviceSerNum, rbtwsApNum, rbtwsApName, rbtwsAPRadioNum, rbtwsRadioMACAddress, rbtwsRadioType, rbtwsRadioMode, rbtwsRadioConfigState, rbtwsApConnectSecurityType, rbtwsApServiceAvailability } STATUS obsolete DESCRIPTION "This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoleted by rbtwsApOperRadioStatusTrap3." ::= { rbtwsTrapsV2 60 } rbtwsMichaelMICFailure NOTIFICATION-TYPE OBJECTS { rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioMACAddress, rbtwsMichaelMICFailureCause, rbtwsClientMACAddress, rbtwsClientMACAddress2 } STATUS current DESCRIPTION "Two Michael MIC failures were seen within 60 seconds of each other. Object rbtwsClientMACAddress indicates the source of the first failure, and object rbtwsClientMACAddress2 indicates the source of the second failure. Service is interrupted for 60 seconds on the radio due to TKIP countermeasures having commenced. The radio is identified by rbtwsApNum and rbtwsAPRadioNum. An alternative way to identify the radio is rbtwsRadioMACAddress. Obsoletes rbtwsMpMichaelMICFailure and rbtwsMpMichaelMICFailure2." ::= { rbtwsTrapsV2 61 } rbtwsClientAuthorizationSuccessTrap3 NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientVLANName, rbtwsClientSessionState, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessMode, rbtwsPhysPortNum, rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioSSID, rbtwsUserAccessType, rbtwsLocalId, rbtwsClientAuthorizationReason } STATUS obsolete DESCRIPTION "This trap is sent when a client authorizes. If rbtwsClientAccessMode = 'ap': rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent. If rbtwsClientAccessMode = 'wired': rbtwsPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoleted by rbtwsClientAuthorizationSuccessTrap4." ::= { rbtwsTrapsV2 62 } rbtwsApManagerChangeTrap NOTIFICATION-TYPE OBJECTS { rbtwsDeviceSerNum, rbtwsAPMACAddress, rbtwsApNum, rbtwsApName, rbtwsApMgrOldIp, rbtwsApMgrNewIp, rbtwsApMgrChangeReason } STATUS current DESCRIPTION "This trap is sent when the AP's secondary link becomes its primary link." ::= { rbtwsTrapsV2 63 } rbtwsClientClearedTrap2 NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientAccessMode, rbtwsPhysPortNum, rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioSSID, rbtwsClientSessionElapsedSeconds, rbtwsLocalId, rbtwsClientClearedReason } STATUS current DESCRIPTION "This trap is sent when a client session is cleared. Obsoletes rbtwsClientClearedTrap." ::= { rbtwsTrapsV2 64 } rbtwsMobilityDomainResiliencyStatusTrap NOTIFICATION-TYPE OBJECTS { rbtwsMobilityDomainResiliencyStatus } STATUS current DESCRIPTION "This trap is sent by a mobility domain seed to announce changes in resilient capacity status." ::= { rbtwsTrapsV2 65 } rbtwsApOperRadioStatusTrap3 NOTIFICATION-TYPE OBJECTS { rbtwsDeviceSerNum, rbtwsApNum, rbtwsApName, rbtwsAPRadioNum, rbtwsRadioMACAddress, rbtwsRadioType, rbtwsRadioMode, rbtwsRadioConfigState, rbtwsRadioChannelWidth, rbtwsRadioMimoState, rbtwsApConnectSecurityType, rbtwsApServiceAvailability } STATUS current DESCRIPTION "This trap is sent when the Radio changes state. It also contains aggregate information about the AP in operational state - security level and service availability. Obsoletes rbtwsApOperRadioStatusTrap and rbtwsApOperRadioStatusTrap2." ::= { rbtwsTrapsV2 66 } rbtwsClientAuthorizationSuccessTrap4 NOTIFICATION-TYPE OBJECTS { rbtwsUserName, rbtwsClientSessionId, rbtwsClientMACAddress, rbtwsClientIp, rbtwsClientVLANName, rbtwsClientSessionState, rbtwsClientAuthServerIp, rbtwsClientAuthenProtocolType, rbtwsClientAccessMode, rbtwsPhysPortNum, rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioSSID, rbtwsClientRadioType, rbtwsUserAccessType, rbtwsLocalId, rbtwsClientAuthorizationReason } STATUS current DESCRIPTION "This trap is sent when a client authorizes. If rbtwsClientAccessMode = 'ap': rbtwsApNum, rbtwsAPRadioNum, rbtwsRadioSSID identify the AP/radio/BSS providing wireless service to this client at the time this trap was sent; rbtwsClientRadioType gives the type of radio used by this client. If rbtwsClientAccessMode = 'wired': rbtwsPhysPortNum identifies the physical port on the AC used by this wired-auth client. Obsoletes rbtwsClientAuthorizationSuccessTrap, rbtwsClientAuthorizationSuccessTrap2, rbtwsClientAuthorizationSuccessTrap3." ::= { rbtwsTrapsV2 67 } rbtwsRFDetectRogueDeviceTrap2 NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectXmtrRadioType, rbtwsRFDetectXmtrCryptoType, rbtwsRFDetectListenerListInfo, rbtwsRFDetectClassificationReason } STATUS current DESCRIPTION "This trap is sent when RF detection finds a rogue device. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (rogue device). rbtwsRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (rogue device). rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectClassificationReason indicates the reason why the device is classified as rogue. Obsoletes rbtwsRFDetectRogueAPTrap, rbtwsRFDetectUnAuthorizedAPTrap, rbtwsRFDetectRogueDeviceTrap." ::= { rbtwsTrapsV2 68 } rbtwsRFDetectSuspectDeviceTrap2 NOTIFICATION-TYPE OBJECTS { rbtwsRFDetectXmtrMacAddr, rbtwsRFDetectXmtrRadioType, rbtwsRFDetectXmtrCryptoType, rbtwsRFDetectListenerListInfo, rbtwsRFDetectClassificationReason } STATUS current DESCRIPTION "This trap is sent when RF detection finds a suspect device. rbtwsRFDetectXmtrMacAddr is the radio MAC address from the beacon. rbtwsRFDetectXmtrRadioType indicates the Type of Radio used by the transmitter (suspect device). rbtwsRFDetectXmtrCryptoType indicates the Type of Crypto used by the transmitter (suspect device). rbtwsRFDetectListenerListInfo is a display string of a list of listener information. rbtwsRFDetectClassificationReason indicates the reason why the device is classified as suspect. Obsoletes rbtwsRFDetectInterferingRogueAPTrap, rbtwsRFDetectSuspectDeviceTrap." ::= { rbtwsTrapsV2 69 } rbtwsClusterFailureTrap NOTIFICATION-TYPE OBJECTS { rbtwsClusterFailureReason, rbtwsClusterFailureDescription } STATUS current DESCRIPTION "This trap is sent when the cluster configuration failed to apply. If rbtwsClusterFailureReason = 'validation-error': The validation error is reported by the receiving end of the configuration updates. The receiving end can be any AC (switch) in the mobility domain: member, secondary seed or primary seed. - Primary seed will be the receiving end of configuration updates when Primary seed is joining the cluster and Secondary seed has preempt mode enabled. - Both Secondary seed and member will be at the receiving end when Primary seed is active." ::= { rbtwsTrapsV2 70 } END