RBTWS-PORT-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-COMPLIANCE, OBJECT-GROUP
        FROM SNMPv2-CONF
    MODULE-IDENTITY, OBJECT-TYPE, Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION
        FROM SNMPv2-TC
    rbtwsMibs
        FROM RBTWS-ROOT-MIB;

rbtwsPortMib MODULE-IDENTITY
    LAST-UPDATED "200805191722Z"
    ORGANIZATION "Enterasys Networks"
    CONTACT-INFO
        "www.enterasys.com"
    DESCRIPTION
        "Port information MIB.

        Copyright 2008 Enterasys Networks, Inc.
        All rights reserved.
        This SNMP Management Information Base
        Specification (Specification) embodies
        confidential and proprietary intellectual property.

        This Specification is supplied 'AS IS' and Enterasys Networks
        makes no warranty, either express or implied, as to the use,
        operation, condition, or performance of the Specification."

    REVISION "200805190004Z"
    DESCRIPTION "v1.1.0: Clarified descriptions"

    REVISION "200611090001Z"
    DESCRIPTION "v1.0.1: Fixed imports and compliance group"

    REVISION "200604060000Z"
    DESCRIPTION "v1.0: Initial version, for 5.0 release"

    ::= { rbtwsMibs 6 }


-- Textual conventions


RbtwsPhysPortNumber ::= TEXTUAL-CONVENTION
        STATUS          current
        DESCRIPTION
                "Physical port number"
        SYNTAX          Unsigned32 (1..1024)

RbtwsPortMode ::= TEXTUAL-CONVENTION
        STATUS          current
        DESCRIPTION
            "Enumeration for the port mode (administratively controlled)."
        SYNTAX          INTEGER {
                                directAttachAP  (1),
                                networkPort     (2),
                                wired           (3)
                                }

RbtwsPortPoeMode ::= TEXTUAL-CONVENTION
        STATUS          current
        DESCRIPTION
            "Enumeration for the port PoE supply configuration:
            the availability of Power over Ethernet is
            administratively controlled, can be enabled or disabled.
            Some ports may not have the Power over Ethernet hardware:
            they should always appear as disabled."
        SYNTAX          INTEGER {
                                poeEnable  (1),
                                poeDisable (2)
                                }


--
-- The Port MIB Tree
--

rbtwsPortObjects      OBJECT IDENTIFIER ::= { rbtwsPortMib 1 }
rbtwsPortDataObjects  OBJECT IDENTIFIER ::= { rbtwsPortObjects 1 }


-- Object definitions

rbtwsPortConfigTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF RbtwsPortConfigEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION     
                "Port configuration table"
        ::= { rbtwsPortDataObjects 1 }

rbtwsPortConfigEntry OBJECT-TYPE
        SYNTAX          RbtwsPortConfigEntry
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "Port configuration entry"
        INDEX   { rbtwsPortConfigPortNumber }
        ::= { rbtwsPortConfigTable 1 }        

RbtwsPortConfigEntry ::= SEQUENCE {
        rbtwsPortConfigPortNumber          RbtwsPhysPortNumber,
        rbtwsPortConfigPortMode            RbtwsPortMode,
        rbtwsPortConfigPoeMode             RbtwsPortPoeMode,
        rbtwsPortConfigTrunkMaster         RbtwsPhysPortNumber
        }

rbtwsPortConfigPortNumber  OBJECT-TYPE
        SYNTAX          RbtwsPhysPortNumber
        MAX-ACCESS      not-accessible
        STATUS          current
        DESCRIPTION
                "Physical Port Number"
        ::= { rbtwsPortConfigEntry 1 }

rbtwsPortConfigPortMode   OBJECT-TYPE
        SYNTAX          RbtwsPortMode
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Indicates whether this port is configured
                     for directly attached AP,
                     as network port, or
                     for wired auth."
        ::= { rbtwsPortConfigEntry 2 }

rbtwsPortConfigPoeMode     OBJECT-TYPE
        SYNTAX          RbtwsPortPoeMode
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "Indicates whether this port is configured to 
                 supply PoE (Power over Ethernet)."
        ::= { rbtwsPortConfigEntry 3 }

rbtwsPortConfigTrunkMaster OBJECT-TYPE
        SYNTAX          RbtwsPhysPortNumber
        MAX-ACCESS      read-only
        STATUS          current
        DESCRIPTION
                "The master port of the group this port belongs to
                 (identified by the physical port number).
                 A zero value means information is not available
                 (usually if this port is not part of any port group)."
        ::= { rbtwsPortConfigEntry 4 }


-- ============================================================================
--
-- Conformance
--

rbtwsPortConformance  OBJECT IDENTIFIER ::= { rbtwsPortObjects 2 }
rbtwsPortCompliances  OBJECT IDENTIFIER ::= { rbtwsPortConformance 1 }
rbtwsPortGroups       OBJECT IDENTIFIER ::= { rbtwsPortConformance 2 }

-- Compliance

rbtwsPortCompliance MODULE-COMPLIANCE
    STATUS      current
    DESCRIPTION
        "The compliance statement for devices that implement
        the Port MIB."
    MODULE  -- rbtwsPortMib

    MANDATORY-GROUPS { rbtwsPortConfigGroup }

    ::= { rbtwsPortCompliances 1 }

-- Units of Conformance

rbtwsPortConfigGroup OBJECT-GROUP
        OBJECTS {
                 rbtwsPortConfigPortMode,
                 rbtwsPortConfigPoeMode,
                 rbtwsPortConfigTrunkMaster     
                }
        STATUS      current
        DESCRIPTION
        "Mandatory group of objects implemented to provide
         Port configuration info."
        ::= { rbtwsPortGroups 1 }

END