Nortel-Magellan-Passport-X25TraceRcvrMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB Hex, NonReplicated, HexString, EnterpriseDateAndTime, DigitString FROM Nortel-Magellan-Passport-TextualConventionsMIB traceSessionIndex, traceRcvrIndex, traceSession, traceIndex, traceRcvr FROM Nortel-Magellan-Passport-TraceBaseMIB; -- LAST-UPDATED "9702280000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- X25TraceRcvr Enterprise MIB." x25TraceRcvrMIB OBJECT IDENTIFIER ::= { passportMIBs 62 } -- Trace Rcvr/ X25 -- This component identifies the access method used by the receiver of -- the trace data as X.25. traceRcvrX25 OBJECT IDENTIFIER ::= { traceRcvr 2 } traceRcvrX25RowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrX25 components." ::= { traceRcvrX25 1 } traceRcvrX25RowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrX25 component." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index } ::= { traceRcvrX25RowStatusTable 1 } TraceRcvrX25RowStatusEntry ::= SEQUENCE { traceRcvrX25RowStatus RowStatus, traceRcvrX25ComponentName DisplayString, traceRcvrX25StorageType StorageType, traceRcvrX25Index NonReplicated } traceRcvrX25RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrX25 components. These components can be added and deleted." ::= { traceRcvrX25RowStatusEntry 1 } traceRcvrX25ComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrX25RowStatusEntry 2 } traceRcvrX25StorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrX25 tables." ::= { traceRcvrX25RowStatusEntry 4 } traceRcvrX25Index OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrX25 tables." ::= { traceRcvrX25RowStatusEntry 10 } -- Trace Rcvr/ X25 DataNetworkAddress -- This component defines the calling end of the trace connection. It -- includes the set of attributes which apply to a Vc connection to an -- X.25 trace receiver. traceRcvrX25Dna OBJECT IDENTIFIER ::= { traceRcvrX25 2 } traceRcvrX25DnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrX25Dna components." ::= { traceRcvrX25Dna 1 } traceRcvrX25DnaRowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrX25DnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrX25Dna component." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DnaIndex } ::= { traceRcvrX25DnaRowStatusTable 1 } TraceRcvrX25DnaRowStatusEntry ::= SEQUENCE { traceRcvrX25DnaRowStatus RowStatus, traceRcvrX25DnaComponentName DisplayString, traceRcvrX25DnaStorageType StorageType, traceRcvrX25DnaIndex NonReplicated } traceRcvrX25DnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrX25Dna components. These components cannot be added nor deleted." ::= { traceRcvrX25DnaRowStatusEntry 1 } traceRcvrX25DnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrX25DnaRowStatusEntry 2 } traceRcvrX25DnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrX25Dna tables." ::= { traceRcvrX25DnaRowStatusEntry 4 } traceRcvrX25DnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrX25Dna tables." ::= { traceRcvrX25DnaRowStatusEntry 10 } traceRcvrX25DnaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits." ::= { traceRcvrX25Dna 10 } traceRcvrX25DnaAddressEntry OBJECT-TYPE SYNTAX TraceRcvrX25DnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrX25DnaAddressTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DnaIndex } ::= { traceRcvrX25DnaAddressTable 1 } TraceRcvrX25DnaAddressEntry ::= SEQUENCE { traceRcvrX25DnaNumberingPlanIndicator INTEGER, traceRcvrX25DnaDataNetworkAddress DigitString } traceRcvrX25DnaNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan." DEFVAL { x121 } ::= { traceRcvrX25DnaAddressEntry 1 } traceRcvrX25DnaDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits." ::= { traceRcvrX25DnaAddressEntry 2 } traceRcvrX25DnaOutgoingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines call options for outgoing calls." ::= { traceRcvrX25Dna 11 } traceRcvrX25DnaOutgoingOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrX25DnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrX25DnaOutgoingOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DnaIndex } ::= { traceRcvrX25DnaOutgoingOptionsTable 1 } TraceRcvrX25DnaOutgoingOptionsEntry ::= SEQUENCE { traceRcvrX25DnaOutCalls INTEGER, traceRcvrX25DnaOutDefaultPriority INTEGER, traceRcvrX25DnaOutIntl INTEGER, traceRcvrX25DnaOutDefaultPathSensitivity INTEGER, traceRcvrX25DnaOutDefaultPathReliability INTEGER, traceRcvrX25DnaOutPathReliabilityOverRide INTEGER, traceRcvrX25DnaOutPathReliabilitySignal INTEGER, traceRcvrX25DnaOutAccess INTEGER } traceRcvrX25DnaOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component." DEFVAL { allowed } ::= { traceRcvrX25DnaOutgoingOptionsEntry 1 } traceRcvrX25DnaOutDefaultPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority." DEFVAL { high } ::= { traceRcvrX25DnaOutgoingOptionsEntry 7 } traceRcvrX25DnaOutIntl OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed." DEFVAL { allowed } ::= { traceRcvrX25DnaOutgoingOptionsEntry 8 } traceRcvrX25DnaOutDefaultPathSensitivity OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute specifies the default class of routing (delay/ throughput) for all outgoing calls (from the DTE to the network) using this particular Dna. The chosen default class of routing applies to all outgoing calls established using this Dna, and applies to the packets travelling in both directions on all outgoing calls (local to remote, and remote to local). This attribute, if set to a value of throughput, specifies that the default class of routing is throughput sensitive. If set to a value of delay, then the default class of routing is delay sensitive. This attribute is obsoleted. Please refer to defaultTransferPriority for the corresponding new attribute." DEFVAL { throughput } ::= { traceRcvrX25DnaOutgoingOptionsEntry 11 } traceRcvrX25DnaOutDefaultPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication." DEFVAL { high } ::= { traceRcvrX25DnaOutgoingOptionsEntry 14 } traceRcvrX25DnaOutPathReliabilityOverRide OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end." DEFVAL { no } ::= { traceRcvrX25DnaOutgoingOptionsEntry 15 } traceRcvrX25DnaOutPathReliabilitySignal OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that reliability routing signaling is not used." DEFVAL { disallowed } ::= { traceRcvrX25DnaOutgoingOptionsEntry 16 } traceRcvrX25DnaOutAccess OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature." DEFVAL { disallowed } ::= { traceRcvrX25DnaOutgoingOptionsEntry 17 } traceRcvrX25DnaIncomingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the call options for incoming calls." ::= { traceRcvrX25Dna 12 } traceRcvrX25DnaIncomingOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrX25DnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrX25DnaIncomingOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DnaIndex } ::= { traceRcvrX25DnaIncomingOptionsTable 1 } TraceRcvrX25DnaIncomingOptionsEntry ::= SEQUENCE { traceRcvrX25DnaIncCalls INTEGER } traceRcvrX25DnaIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna." DEFVAL { disallowed } ::= { traceRcvrX25DnaIncomingOptionsEntry 1 } traceRcvrX25DnaCallOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CallOptions group defines additional options for calls which are not specific to the direction of the call." ::= { traceRcvrX25Dna 13 } traceRcvrX25DnaCallOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrX25DnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrX25DnaCallOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DnaIndex } ::= { traceRcvrX25DnaCallOptionsTable 1 } TraceRcvrX25DnaCallOptionsEntry ::= SEQUENCE { traceRcvrX25DnaPacketSizes OCTET STRING, traceRcvrX25DnaDefaultRecvFrmNetworkPacketSize INTEGER, traceRcvrX25DnaDefaultSendToNetworkPacketSize INTEGER, traceRcvrX25DnaDefaultRecvFrmNetworkThruputClass Unsigned32, traceRcvrX25DnaDefaultSendToNetworkThruputClass Unsigned32, traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize Unsigned32, traceRcvrX25DnaDefaultSendToNetworkWindowSize Unsigned32, traceRcvrX25DnaPacketSizeNegotiation INTEGER, traceRcvrX25DnaCugFormat INTEGER } traceRcvrX25DnaPacketSizes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)" DEFVAL { '0100'H } ::= { traceRcvrX25DnaCallOptionsEntry 2 } traceRcvrX25DnaDefaultRecvFrmNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna." DEFVAL { n2048 } ::= { traceRcvrX25DnaCallOptionsEntry 3 } traceRcvrX25DnaDefaultSendToNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna." DEFVAL { n2048 } ::= { traceRcvrX25DnaCallOptionsEntry 4 } traceRcvrX25DnaDefaultRecvFrmNetworkThruputClass OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default receive throughput class, (towards the interface) for all calls using this particular Dna." DEFVAL { 10 } ::= { traceRcvrX25DnaCallOptionsEntry 5 } traceRcvrX25DnaDefaultSendToNetworkThruputClass OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default send throughput class (towards the network) for all calls using this particular Dna." DEFVAL { 10 } ::= { traceRcvrX25DnaCallOptionsEntry 6 } traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default value for the number of data packets that can be send to the interface before any acknowledgment." DEFVAL { 1 } ::= { traceRcvrX25DnaCallOptionsEntry 7 } traceRcvrX25DnaDefaultSendToNetworkWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default value for the number of data packets that can be received from the interface before any acknowledgment." DEFVAL { 1 } ::= { traceRcvrX25DnaCallOptionsEntry 8 } traceRcvrX25DnaPacketSizeNegotiation OBJECT-TYPE SYNTAX INTEGER { endToEnd(0), local(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to local specifies that packet sizes can be negotiated locally at the interface irrespective of the setting at the remote interface. If set to endtoEnd, then the packet size negotiation is between the local and remote interface (i.e. packet sizes are the same on both interfaces)." DEFVAL { local } ::= { traceRcvrX25DnaCallOptionsEntry 9 } traceRcvrX25DnaCugFormat OBJECT-TYPE SYNTAX INTEGER { basic(0), extended(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long." DEFVAL { basic } ::= { traceRcvrX25DnaCallOptionsEntry 10 } -- Trace Rcvr/ X25 Dna ClosedUserGroup -- The ClosedUserGroup component defines options associated with a -- national or international closed user group identifier. When a Dna is -- defined with a Cug, calls to other Dnas which do not have the same -- Cug interlockCode defined are refused. When a Dna is not defined -- with a Cug, calls to other Dnas which have any Cug interlockCode -- defined are refused. The Dna attributes outAccess and incAccess -- can override these rules. -- If this component is present, the X.25 interface which connects to -- the X.25 trace receiver must be provisioned with the same Cug -- interlockCode. traceRcvrX25DnaCug OBJECT IDENTIFIER ::= { traceRcvrX25Dna 2 } traceRcvrX25DnaCugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrX25DnaCug components." ::= { traceRcvrX25DnaCug 1 } traceRcvrX25DnaCugRowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrX25DnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrX25DnaCug component." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DnaIndex, traceRcvrX25DnaCugIndex } ::= { traceRcvrX25DnaCugRowStatusTable 1 } TraceRcvrX25DnaCugRowStatusEntry ::= SEQUENCE { traceRcvrX25DnaCugRowStatus RowStatus, traceRcvrX25DnaCugComponentName DisplayString, traceRcvrX25DnaCugStorageType StorageType, traceRcvrX25DnaCugIndex Integer32 } traceRcvrX25DnaCugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrX25DnaCug components. These components can be added and deleted." ::= { traceRcvrX25DnaCugRowStatusEntry 1 } traceRcvrX25DnaCugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrX25DnaCugRowStatusEntry 2 } traceRcvrX25DnaCugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrX25DnaCug tables." ::= { traceRcvrX25DnaCugRowStatusEntry 4 } traceRcvrX25DnaCugIndex OBJECT-TYPE SYNTAX Integer32 (1..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrX25DnaCug tables." ::= { traceRcvrX25DnaCugRowStatusEntry 10 } traceRcvrX25DnaCugCugOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group." ::= { traceRcvrX25DnaCug 10 } traceRcvrX25DnaCugCugOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrX25DnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrX25DnaCugCugOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DnaIndex, traceRcvrX25DnaCugIndex } ::= { traceRcvrX25DnaCugCugOptionsTable 1 } TraceRcvrX25DnaCugCugOptionsEntry ::= SEQUENCE { traceRcvrX25DnaCugType INTEGER, traceRcvrX25DnaCugDnic DigitString, traceRcvrX25DnaCugInterlockCode Unsigned32, traceRcvrX25DnaCugPreferential INTEGER, traceRcvrX25DnaCugOutCalls INTEGER, traceRcvrX25DnaCugIncCalls INTEGER, traceRcvrX25DnaCugPrivileged INTEGER } traceRcvrX25DnaCugType OBJECT-TYPE SYNTAX INTEGER { national(0), international(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries." DEFVAL { national } ::= { traceRcvrX25DnaCugCugOptionsEntry 1 } traceRcvrX25DnaCugDnic OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T." DEFVAL { '30303030'H } -- "0000" ::= { traceRcvrX25DnaCugCugOptionsEntry 2 } traceRcvrX25DnaCugInterlockCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode." DEFVAL { 0 } ::= { traceRcvrX25DnaCugCugOptionsEntry 3 } traceRcvrX25DnaCugPreferential OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that this Cug is to be used on all outgoing calls to the X.25 trace receiver." DEFVAL { yes } ::= { traceRcvrX25DnaCugCugOptionsEntry 4 } traceRcvrX25DnaCugOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug." DEFVAL { allowed } ::= { traceRcvrX25DnaCugCugOptionsEntry 5 } traceRcvrX25DnaCugIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug." DEFVAL { disallowed } ::= { traceRcvrX25DnaCugCugOptionsEntry 6 } traceRcvrX25DnaCugPrivileged OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug." DEFVAL { yes } ::= { traceRcvrX25DnaCugCugOptionsEntry 7 } -- Trace Rcvr/ X25 DirectCall -- This component defines direct call options for the call to the X.25 -- trace receiver. The connection is initiated on receipt of a Start -- FrUni/n Trace command. traceRcvrX25Dc OBJECT IDENTIFIER ::= { traceRcvrX25 3 } traceRcvrX25DcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrX25Dc components." ::= { traceRcvrX25Dc 1 } traceRcvrX25DcRowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrX25DcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrX25Dc component." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DcIndex } ::= { traceRcvrX25DcRowStatusTable 1 } TraceRcvrX25DcRowStatusEntry ::= SEQUENCE { traceRcvrX25DcRowStatus RowStatus, traceRcvrX25DcComponentName DisplayString, traceRcvrX25DcStorageType StorageType, traceRcvrX25DcIndex NonReplicated } traceRcvrX25DcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrX25Dc components. These components cannot be added nor deleted." ::= { traceRcvrX25DcRowStatusEntry 1 } traceRcvrX25DcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrX25DcRowStatusEntry 2 } traceRcvrX25DcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrX25Dc tables." ::= { traceRcvrX25DcRowStatusEntry 4 } traceRcvrX25DcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrX25Dc tables." ::= { traceRcvrX25DcRowStatusEntry 10 } traceRcvrX25DcOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrX25DcOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Options group defines attributes associated with the SVC direct call." ::= { traceRcvrX25Dc 10 } traceRcvrX25DcOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrX25DcOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrX25DcOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrX25Index, traceRcvrX25DcIndex } ::= { traceRcvrX25DcOptionsTable 1 } TraceRcvrX25DcOptionsEntry ::= SEQUENCE { traceRcvrX25DcRemoteNpi INTEGER, traceRcvrX25DcRemoteDna DigitString, traceRcvrX25DcType INTEGER, traceRcvrX25DcUserData HexString } traceRcvrX25DcRemoteNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the numbering plan used for the remoteDna." DEFVAL { x121 } ::= { traceRcvrX25DcOptionsEntry 3 } traceRcvrX25DcRemoteDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the X.25 trace receiver which will receive the trace data." ::= { traceRcvrX25DcOptionsEntry 4 } traceRcvrX25DcType OBJECT-TYPE SYNTAX INTEGER { switched(0), permanentMaster(1), permanentSlave(2), permanentBackupSlave(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection." DEFVAL { switched } ::= { traceRcvrX25DcOptionsEntry 6 } traceRcvrX25DcUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE." DEFVAL { ''H } -- "" ::= { traceRcvrX25DcOptionsEntry 8 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Trace Session/ X25 -- This component identifies the access method used by the receiver of -- the trace data as X.25. traceSessionX25 OBJECT IDENTIFIER ::= { traceSession 2 } traceSessionX25RowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionX25 components." ::= { traceSessionX25 1 } traceSessionX25RowStatusEntry OBJECT-TYPE SYNTAX TraceSessionX25RowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceSessionX25 component." INDEX { traceIndex, traceSessionIndex, traceSessionX25Index } ::= { traceSessionX25RowStatusTable 1 } TraceSessionX25RowStatusEntry ::= SEQUENCE { traceSessionX25RowStatus RowStatus, traceSessionX25ComponentName DisplayString, traceSessionX25StorageType StorageType, traceSessionX25Index NonReplicated } traceSessionX25RowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceSessionX25 components. These components cannot be added nor deleted." ::= { traceSessionX25RowStatusEntry 1 } traceSessionX25ComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceSessionX25RowStatusEntry 2 } traceSessionX25StorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceSessionX25 tables." ::= { traceSessionX25RowStatusEntry 4 } traceSessionX25Index OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceSessionX25 tables." ::= { traceSessionX25RowStatusEntry 10 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- ... Vc() -- This component defines display of general Vc dynamic attributes traceSessionX25Vc OBJECT IDENTIFIER ::= { traceSessionX25 2 } traceSessionX25VcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionX25VcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionX25Vc components." ::= { traceSessionX25Vc 1 } traceSessionX25VcRowStatusEntry OBJECT-TYPE SYNTAX TraceSessionX25VcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceSessionX25Vc component." INDEX { traceIndex, traceSessionIndex, traceSessionX25Index, traceSessionX25VcIndex } ::= { traceSessionX25VcRowStatusTable 1 } TraceSessionX25VcRowStatusEntry ::= SEQUENCE { traceSessionX25VcRowStatus RowStatus, traceSessionX25VcComponentName DisplayString, traceSessionX25VcStorageType StorageType, traceSessionX25VcIndex NonReplicated } traceSessionX25VcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceSessionX25Vc components. These components cannot be added nor deleted." ::= { traceSessionX25VcRowStatusEntry 1 } traceSessionX25VcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceSessionX25VcRowStatusEntry 2 } traceSessionX25VcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceSessionX25Vc tables." ::= { traceSessionX25VcRowStatusEntry 4 } traceSessionX25VcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceSessionX25Vc tables." ::= { traceSessionX25VcRowStatusEntry 10 } traceSessionX25VcCadTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionX25VcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to General Vc. It can be displayed only for General Vc which is created by application." ::= { traceSessionX25Vc 10 } traceSessionX25VcCadEntry OBJECT-TYPE SYNTAX TraceSessionX25VcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceSessionX25VcCadTable." INDEX { traceIndex, traceSessionIndex, traceSessionX25Index, traceSessionX25VcIndex } ::= { traceSessionX25VcCadTable 1 } TraceSessionX25VcCadEntry ::= SEQUENCE { traceSessionX25VcType INTEGER, traceSessionX25VcState INTEGER, traceSessionX25VcPreviousState INTEGER, traceSessionX25VcDiagnosticCode Unsigned32, traceSessionX25VcPreviousDiagnosticCode Unsigned32, traceSessionX25VcCalledNpi INTEGER, traceSessionX25VcCalledDna DigitString, traceSessionX25VcCalledLcn Unsigned32, traceSessionX25VcCallingNpi INTEGER, traceSessionX25VcCallingDna DigitString, traceSessionX25VcCallingLcn Unsigned32, traceSessionX25VcAccountingEnabled INTEGER, traceSessionX25VcFastSelectCall INTEGER, traceSessionX25VcLocalRxPktSize INTEGER, traceSessionX25VcLocalTxPktSize INTEGER, traceSessionX25VcLocalTxWindowSize Unsigned32, traceSessionX25VcLocalRxWindowSize Unsigned32, traceSessionX25VcPathReliability INTEGER, traceSessionX25VcAccountingEnd INTEGER, traceSessionX25VcPriority INTEGER, traceSessionX25VcSegmentSize Unsigned32, traceSessionX25VcSubnetTxPktSize INTEGER, traceSessionX25VcSubnetTxWindowSize Unsigned32, traceSessionX25VcSubnetRxPktSize INTEGER, traceSessionX25VcSubnetRxWindowSize Unsigned32, traceSessionX25VcMaxSubnetPktSize Unsigned32, traceSessionX25VcTransferPriorityToNetwork INTEGER, traceSessionX25VcTransferPriorityFromNetwork INTEGER } traceSessionX25VcType OBJECT-TYPE SYNTAX INTEGER { svc(0), pvc(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the type of call, pvc or svc. type is provided at provisioning time." ::= { traceSessionX25VcCadEntry 1 } traceSessionX25VcState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4." ::= { traceSessionX25VcCadEntry 2 } traceSessionX25VcPreviousState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing." ::= { traceSessionX25VcCadEntry 3 } traceSessionX25VcDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { traceSessionX25VcCadEntry 4 } traceSessionX25VcPreviousDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { traceSessionX25VcCadEntry 5 } traceSessionX25VcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the called end." ::= { traceSessionX25VcCadEntry 6 } traceSessionX25VcCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection." ::= { traceSessionX25VcCadEntry 7 } traceSessionX25VcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information." ::= { traceSessionX25VcCadEntry 8 } traceSessionX25VcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." ::= { traceSessionX25VcCadEntry 9 } traceSessionX25VcCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the calling end." ::= { traceSessionX25VcCadEntry 10 } traceSessionX25VcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the calling end." ::= { traceSessionX25VcCadEntry 11 } traceSessionX25VcAccountingEnabled OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options." ::= { traceSessionX25VcCadEntry 12 } traceSessionX25VcFastSelectCall OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays that this is a fast select call." ::= { traceSessionX25VcCadEntry 13 } traceSessionX25VcLocalRxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of send packets." ::= { traceSessionX25VcCadEntry 14 } traceSessionX25VcLocalTxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of send packets." ::= { traceSessionX25VcCadEntry 15 } traceSessionX25VcLocalTxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the send window size provided on incoming call packets or the default when a call request packet does not explicitly provide the window size." ::= { traceSessionX25VcCadEntry 16 } traceSessionX25VcLocalRxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the receive window size provided on incoming call packets or the default when a call request does not explicitly provide the window sizes." ::= { traceSessionX25VcCadEntry 17 } traceSessionX25VcPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the path reliability." ::= { traceSessionX25VcCadEntry 19 } traceSessionX25VcAccountingEnd OBJECT-TYPE SYNTAX INTEGER { callingEnd(0), calledEnd(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record." ::= { traceSessionX25VcCadEntry 20 } traceSessionX25VcPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the call is a normal or a high priority call." ::= { traceSessionX25VcCadEntry 21 } traceSessionX25VcSegmentSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received." ::= { traceSessionX25VcCadEntry 22 } traceSessionX25VcSubnetTxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of the data packets on this Vc." ::= { traceSessionX25VcCadEntry 23 } traceSessionX25VcSubnetTxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the current send window size of Vc." ::= { traceSessionX25VcCadEntry 24 } traceSessionX25VcSubnetRxPktSize OBJECT-TYPE SYNTAX INTEGER { unknown(0), n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the locally negotiated size of receive packets." ::= { traceSessionX25VcCadEntry 25 } traceSessionX25VcSubnetRxWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the receive window size provided on incoming call packets and to the default when a call request does not explicitly provide the window sizes." ::= { traceSessionX25VcCadEntry 26 } traceSessionX25VcMaxSubnetPktSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the maximum packet size allowed on Vc." ::= { traceSessionX25VcCadEntry 27 } traceSessionX25VcTransferPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the priority in which data is transferred to the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, the routing metric is set to throughput." ::= { traceSessionX25VcCadEntry 28 } traceSessionX25VcTransferPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the priority in which data is transferred from the network. The transfer priority is a preference specified by an application according to its delay-sensitivity requirement. Frames with high transfer priority are served by the network before the frames with normal priority. Each transfer priority contains a predetermined setting for trunk queue (interrupting, delay or throughput), and routing metric (delay or throughput). When the transfer priority is set at high, and the trunk queue is set to high, the routing metric is set to delay. When the transfer priority is set at normal, the trunk queue is set to normal, and the routing metric is set to throughput." ::= { traceSessionX25VcCadEntry 29 } traceSessionX25VcIntdTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionX25VcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued." ::= { traceSessionX25Vc 11 } traceSessionX25VcIntdEntry OBJECT-TYPE SYNTAX TraceSessionX25VcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceSessionX25VcIntdTable." INDEX { traceIndex, traceSessionIndex, traceSessionX25Index, traceSessionX25VcIndex } ::= { traceSessionX25VcIntdTable 1 } TraceSessionX25VcIntdEntry ::= SEQUENCE { traceSessionX25VcCallReferenceNumber Hex, traceSessionX25VcElapsedTimeTillNow Unsigned32, traceSessionX25VcSegmentsRx Unsigned32, traceSessionX25VcSegmentsSent Unsigned32, traceSessionX25VcStartTime EnterpriseDateAndTime } traceSessionX25VcCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { traceSessionX25VcIntdEntry 1 } traceSessionX25VcElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started." ::= { traceSessionX25VcIntdEntry 2 } traceSessionX25VcSegmentsRx OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state." ::= { traceSessionX25VcIntdEntry 3 } traceSessionX25VcSegmentsSent OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet." ::= { traceSessionX25VcIntdEntry 4 } traceSessionX25VcStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes." ::= { traceSessionX25VcIntdEntry 5 } traceSessionX25VcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionX25VcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** ... Statistics(Stats) This group defines general attributes collected by general Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods." ::= { traceSessionX25Vc 12 } traceSessionX25VcStatsEntry OBJECT-TYPE SYNTAX TraceSessionX25VcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceSessionX25VcStatsTable." INDEX { traceIndex, traceSessionIndex, traceSessionX25Index, traceSessionX25VcIndex } ::= { traceSessionX25VcStatsTable 1 } TraceSessionX25VcStatsEntry ::= SEQUENCE { traceSessionX25VcAckStackingTimeouts Unsigned32, traceSessionX25VcOutOfRangeFrmFromSubnet Unsigned32, traceSessionX25VcDuplicatesFromSubnet Unsigned32, traceSessionX25VcFrmRetryTimeouts Unsigned32, traceSessionX25VcPeakRetryQueueSize Unsigned32, traceSessionX25VcPeakOoSeqQueueSize Unsigned32, traceSessionX25VcPeakOoSeqFrmForwarded Unsigned32, traceSessionX25VcPeakStackedAcksRx Unsigned32, traceSessionX25VcSubnetRecoveries Unsigned32, traceSessionX25VcWindowClosuresToSubnet Unsigned32, traceSessionX25VcWindowClosuresFromSubnet Unsigned32, traceSessionX25VcWrTriggers Unsigned32 } traceSessionX25VcAckStackingTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of ack stacking timer expiries. It is used as an indicator of the acknowledgment behavior across the subnet when ack stacking is in effect. If it expires often, usually this means end users will experience longer delay. The ack stacking timer specifies how long the Vc will wait before finally sending the subnet acknowledgment. if this attribute is set to a value of 0, then the Vc will automatically return acknowledgment packets without delay. If this attribute is set to a value other than zero, then the Vc will wait for this amount of time in an attempt to piggyback the acknowledgment packet on another credit or data packet. If the Vc cannot piggyback the acknowledgment packet within this time, then the packet is returned without piggybacking." ::= { traceSessionX25VcStatsEntry 1 } traceSessionX25VcOutOfRangeFrmFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of subnet frames discarded due to the sequence number being out of range. Two Categories apply for the General Vc 1) lost Acks (previous Range) 2) unexpected Packets (next Range) Vc internally maintains its own sequence number of packet order and sequencing. Due to packet retransmission, Vc may receive duplicate packets that have the same Vc internal sequence number. Only 1 copy is accepted by the Vc and other copies of the same packets are detected through this count. This attribute can be used to record the frequency of packet retransmission due to Vc and other part of the subnet." ::= { traceSessionX25VcStatsEntry 2 } traceSessionX25VcDuplicatesFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of subnet packets discarded due to duplication. It is used to detect software error fault or duplication caused by retransmitting." ::= { traceSessionX25VcStatsEntry 3 } traceSessionX25VcFrmRetryTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames which have retransmission time-out. If packets from Vc into the subnet are discarded by the subnet, the source Vc will not receive any acknowledgment. The retransmission timer then expires and packets will be retransmitted again. Note that the Vc idle probe may be retransmitted and is included in this count. This statistics does not show the distribution of how many times packets are retransmitted (e.g. first retransmission results in successful packet forwarding)." ::= { traceSessionX25VcStatsEntry 4 } traceSessionX25VcPeakRetryQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest body of unacknowledged packets." ::= { traceSessionX25VcStatsEntry 5 } traceSessionX25VcPeakOoSeqQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the out of sequence queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets." ::= { traceSessionX25VcStatsEntry 6 } traceSessionX25VcPeakOoSeqFrmForwarded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of the sequence packet queue. This attribute is used as an indicator of the sequencing behavior across the subnet. It records the largest body of out of sequence packets, which by the receipt of an expected packet have been transformed to expected packets. The number of times this peak is reached is not recorded as it is traffic dependent." ::= { traceSessionX25VcStatsEntry 7 } traceSessionX25VcPeakStackedAcksRx OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the peak size of wait acks. This attribute is used as an indicator of the acknowledgment behavior across the subnet. It records the largest collective acknowledgment." ::= { traceSessionX25VcStatsEntry 8 } traceSessionX25VcSubnetRecoveries OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of successful Vc recovery attempts. This attribute is used as an indicator of how many times the Vc path is broken but can be recovered. This attribute is useful to record the number of network path failures." ::= { traceSessionX25VcStatsEntry 9 } traceSessionX25VcWindowClosuresToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of window closures to subnet. A packet may have been sent into the subnet but its acknowledgment from the remote Vc has not yet been received. This is a 8 bit sequence number.This number is useful in detecting whether the Vc is sending any packet into the subnet." ::= { traceSessionX25VcStatsEntry 10 } traceSessionX25VcWindowClosuresFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of window closures from subnet. This attribute is useful in detecting whether the Vc is receiving any packet from the subnet." ::= { traceSessionX25VcStatsEntry 11 } traceSessionX25VcWrTriggers OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of times the Vc stays within the W-R region. The W-R region is a value used to determined the timing of credit transmission. Should the current window size be beneath this value, the credits will be transmitted immediately. Otherwise, they will be transmitted later with actual data. The wrTriggers statistic is therefore used to analyze the flow control and credit mechanism." ::= { traceSessionX25VcStatsEntry 12 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { traceSessionX25VcPeakRetryQueueSize, -- traceRcvrX25DnaOutCalls, -- traceSessionX25VcCalledDna, -- traceRcvrX25DnaCugPreferential, -- traceSessionX25VcMaxSubnetPktSize, -- traceRcvrX25DnaOutAccess, -- traceRcvrX25DnaDefaultSendToNetworkWindowSize, -- traceSessionX25VcPeakOoSeqFrmForwarded, -- traceSessionX25VcStorageType, -- traceSessionX25VcType, -- traceSessionX25VcFrmRetryTimeouts, -- traceRcvrX25DcComponentName, -- traceSessionX25VcPriority, -- traceSessionX25VcSubnetRxPktSize, -- traceRcvrX25DnaDefaultRecvFrmNetworkPacketSize, -- traceRcvrX25ComponentName, -- traceSessionX25VcCallingLcn, -- traceSessionX25VcPeakOoSeqQueueSize, -- traceSessionX25VcCallingDna, -- traceSessionX25VcRowStatus, -- traceSessionX25VcCallingNpi, -- traceRcvrX25DnaCugOutCalls, -- traceSessionX25VcSubnetTxWindowSize, -- traceSessionX25VcSegmentsSent, -- traceSessionX25VcLocalRxPktSize, -- traceRcvrX25DnaCugStorageType, -- traceSessionX25VcLocalTxWindowSize, -- traceSessionX25VcFastSelectCall, -- traceRcvrX25DnaCugPrivileged, -- traceRcvrX25DnaOutIntl, -- traceSessionX25VcPathReliability, -- traceRcvrX25DnaCugFormat, -- traceRcvrX25DnaDefaultRecvFrmNetworkWindowSize, -- traceRcvrX25DnaCugIncCalls, -- traceRcvrX25DcUserData, -- traceSessionX25VcTransferPriorityFromNetwork, -- traceRcvrX25DnaStorageType, -- traceRcvrX25DnaCugType, -- traceSessionX25VcSegmentSize, -- traceSessionX25StorageType, -- traceSessionX25VcCallReferenceNumber, -- traceSessionX25VcPeakStackedAcksRx, -- traceRcvrX25DnaOutDefaultPriority, -- traceRcvrX25DnaOutDefaultPathReliability, -- traceRcvrX25DnaIncCalls, -- traceSessionX25VcState, -- traceSessionX25VcAckStackingTimeouts, -- traceSessionX25VcWindowClosuresFromSubnet, -- traceRcvrX25DnaDefaultSendToNetworkThruputClass, -- traceSessionX25VcSegmentsRx, -- traceRcvrX25DnaCugRowStatus, -- traceSessionX25VcDuplicatesFromSubnet, -- traceRcvrX25DnaPacketSizes, -- traceRcvrX25DnaPacketSizeNegotiation, -- traceSessionX25VcPreviousDiagnosticCode, -- traceSessionX25VcSubnetTxPktSize, -- traceSessionX25VcDiagnosticCode, -- traceRcvrX25DnaRowStatus, -- traceRcvrX25DnaDefaultSendToNetworkPacketSize, -- traceRcvrX25DcStorageType, -- traceSessionX25VcComponentName, -- traceSessionX25VcLocalRxWindowSize, -- traceSessionX25VcWrTriggers, -- traceSessionX25VcSubnetRxWindowSize, -- traceRcvrX25StorageType, -- traceSessionX25VcWindowClosuresToSubnet, -- traceSessionX25VcCalledLcn, -- traceRcvrX25DnaCugComponentName, -- traceSessionX25VcSubnetRecoveries, -- traceRcvrX25DnaCugDnic, -- traceSessionX25VcElapsedTimeTillNow, -- traceSessionX25VcOutOfRangeFrmFromSubnet, -- traceRcvrX25DcType, -- traceRcvrX25DnaComponentName, -- traceRcvrX25DnaCugInterlockCode, -- traceRcvrX25DnaNumberingPlanIndicator, -- traceRcvrX25DnaDataNetworkAddress, -- traceSessionX25RowStatus, -- traceSessionX25VcAccountingEnabled, -- traceSessionX25ComponentName, -- traceSessionX25VcAccountingEnd, -- traceSessionX25VcTransferPriorityToNetwork, -- traceRcvrX25DcRemoteNpi, -- traceSessionX25VcPreviousState, -- traceRcvrX25DcRowStatus, -- traceRcvrX25DnaDefaultRecvFrmNetworkThruputClass, -- traceRcvrX25DnaOutPathReliabilityOverRide, -- traceSessionX25VcStartTime, -- traceRcvrX25RowStatus, -- traceSessionX25VcLocalTxPktSize, -- traceRcvrX25DcRemoteDna, -- traceSessionX25VcCalledNpi, -- traceRcvrX25DnaOutPathReliabilitySignal } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." x25TraceRcvrGroup OBJECT IDENTIFIER ::= { x25TraceRcvrMIB 1 } x25TraceRcvrGroupBD OBJECT IDENTIFIER ::= { x25TraceRcvrGroup 4 } x25TraceRcvrGroupBD00 OBJECT IDENTIFIER ::= { x25TraceRcvrGroupBD 1 } x25TraceRcvrGroupBD00A OBJECT IDENTIFIER ::= { x25TraceRcvrGroupBD00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 X25TraceRcvr." -- STATUS mandatory -- DESCRIPTION "X25TraceRcvr MIB: MIB Version BD00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-X25TraceRcvrMIB -- INCLUDES { x25TraceRcvrGroupBD00A } x25TraceRcvrCapabilities OBJECT IDENTIFIER ::= { x25TraceRcvrMIB 3 } x25TraceRcvrCapabilitiesBD OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilities 4 } x25TraceRcvrCapabilitiesBD00 OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilitiesBD 1 } x25TraceRcvrCapabilitiesBD00A OBJECT IDENTIFIER ::= { x25TraceRcvrCapabilitiesBD00 2 } END