Nortel-Magellan-Passport-X25DteMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, InterfaceIndex, Gauge32, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, NonReplicated, DigitString, HexString, Link FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9808030000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- X25Dte Enterprise MIB." x25DteMIB OBJECT IDENTIFIER ::= { passportMIBs 48 } -- -- X25Dte/n -- The X25Dte component defines the general parameters for -- implementing the X.25 DTE interface. x25Dte OBJECT IDENTIFIER ::= { components 90 } x25DteRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of x25Dte components." ::= { x25Dte 1 } x25DteRowStatusEntry OBJECT-TYPE SYNTAX X25DteRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25Dte component." INDEX { x25DteIndex } ::= { x25DteRowStatusTable 1 } X25DteRowStatusEntry ::= SEQUENCE { x25DteRowStatus RowStatus, x25DteComponentName DisplayString, x25DteStorageType StorageType, x25DteIndex Integer32 } x25DteRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25Dte components. These components can be added and deleted." ::= { x25DteRowStatusEntry 1 } x25DteComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DteRowStatusEntry 2 } x25DteStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25Dte tables." ::= { x25DteRowStatusEntry 4 } x25DteIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25Dte tables." ::= { x25DteRowStatusEntry 10 } x25DteCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { x25Dte 20 } x25DteCidDataEntry OBJECT-TYPE SYNTAX X25DteCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteCidDataTable." INDEX { x25DteIndex } ::= { x25DteCidDataTable 1 } X25DteCidDataEntry ::= SEQUENCE { x25DteCustomerIdentifier Unsigned32 } x25DteCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { x25DteCidDataEntry 1 } x25DteIfTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the administrative set of parameters for the X.25 interface." ::= { x25Dte 21 } x25DteIfEntry OBJECT-TYPE SYNTAX X25DteIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteIfTable." INDEX { x25DteIndex } ::= { x25DteIfTable 1 } X25DteIfEntry ::= SEQUENCE { x25DteInterfaceMode INTEGER, x25DteMaxActiveChannels Unsigned32, x25DteNumberOfPLcn Unsigned32, x25DtePacketSequencing INTEGER, x25DteT20RestartTimer Unsigned32, x25DteT21CallTimer Unsigned32, x25DteT22ResetTimer Unsigned32, x25DteT23ClearTimer Unsigned32 } x25DteInterfaceMode OBJECT-TYPE SYNTAX INTEGER { dte(1), dce(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the packet mode in which the X.25 interface operates. When this attribute is set to dte, interface on the other side of the physical link must be configured as a dce." DEFVAL { dte } ::= { x25DteIfEntry 1 } x25DteMaxActiveChannels OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of channels that can be active on this interface including the Permanent Lcns and the Switched Lcns. In total maxActiveChannel will determine the maximum number of Lcn components which may exist at a given time. This should be set to a value greater or equal to the numberOfPLcn provisioned." DEFVAL { 10 } ::= { x25DteIfEntry 2 } x25DteNumberOfPLcn OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of Permanent Logical Channels that are supported on this X.25 interface (that is, the number of PermLcn components that may be provisioned at this interface). The PermLcn components use channel numbers starting from 1 and up to lowestILChannelNumber. A value of 0 for this attribute indicates that no Permanent Logical channels are supported on this X.25 interface." DEFVAL { 0 } ::= { x25DteIfEntry 3 } x25DtePacketSequencing OBJECT-TYPE SYNTAX INTEGER { modulo8(1), modulo128(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the sequence numbering of packets for the X.25 interface. The value of this attribute must be the same as the packet sequencing configured at the X.25 interface on the other side of the physical link." DEFVAL { modulo8 } ::= { x25DteIfEntry 4 } x25DteT20RestartTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..65536000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute provides the period in milliseconds within which a restart request packet should be confirmed." DEFVAL { 60000 } ::= { x25DteIfEntry 5 } x25DteT21CallTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..65536000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute provides the period in milliseconds within which a call request packet should be confirmed." DEFVAL { 180000 } ::= { x25DteIfEntry 6 } x25DteT22ResetTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..65536000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute provides the period in milliseconds within which a reset request packet should be confirmed." DEFVAL { 60000 } ::= { x25DteIfEntry 7 } x25DteT23ClearTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..65536000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute provides the period in milliseconds within which a clear request packet should be confirmed." DEFVAL { 60000 } ::= { x25DteIfEntry 8 } x25DteLcnCTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLcnCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the Logical Channel configuration of the X.25 Interface. The logical channel range table is ordered as follows: Permanent Logical Channels(PLC), One-way Incoming Channels (IC), Two-way Channels(TC) and One-way Outgoing Channels (OC), in a consecutive manner." ::= { x25Dte 22 } x25DteLcnCEntry OBJECT-TYPE SYNTAX X25DteLcnCEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLcnCTable." INDEX { x25DteIndex } ::= { x25DteLcnCTable 1 } X25DteLcnCEntry ::= SEQUENCE { x25DteLowestILChannelNumber Unsigned32, x25DteHighestILChannelNumber Unsigned32, x25DteLowestTLChannelNumber Unsigned32, x25DteHighestTLChannelNumber Unsigned32, x25DteLowestOLChannelNumber Unsigned32, x25DteHighestOLChannelNumber Unsigned32 } x25DteLowestILChannelNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the lowest Lcn number of the One-way Incoming Channel range for this X.25 interface. The value for this attribute must be greater than the numberOfPLcn attribute." DEFVAL { 0 } ::= { x25DteLcnCEntry 1 } x25DteHighestILChannelNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the highest Lcn number of the One-way Incoming Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this range." DEFVAL { 0 } ::= { x25DteLcnCEntry 2 } x25DteLowestTLChannelNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the lowest Lcn number of the Two-way Channel range for this X.25 interface. The value for this attribute must be greater than the highestILChannelNumber attribute." DEFVAL { 1 } ::= { x25DteLcnCEntry 3 } x25DteHighestTLChannelNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the highest Lcn number of the Two-way Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this range." DEFVAL { 20 } ::= { x25DteLcnCEntry 4 } x25DteLowestOLChannelNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the lowest Lcn number of the One-way Outgoing Channel range for this X.25 interface. The value for this attribute must be greater than the highestTLChannelNumber attribute." DEFVAL { 0 } ::= { x25DteLcnCEntry 5 } x25DteHighestOLChannelNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4095) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the highest Lcn number of the One-way Outgoing Channel range for this X.25 interface. A value of 0 indicates that there are no channels in this range." DEFVAL { 0 } ::= { x25DteLcnCEntry 6 } x25DteDcpTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteDcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes giving the default call parameters used by all the logical channels during call setup. It is possible that different default call parameters will be used for a particular call, based on the Peer component for the given call. The actual call parameters operational for a given call are found in the Lcn component." ::= { x25Dte 23 } x25DteDcpEntry OBJECT-TYPE SYNTAX X25DteDcpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteDcpTable." INDEX { x25DteIndex } ::= { x25DteDcpTable 1 } X25DteDcpEntry ::= SEQUENCE { x25DteInPacketSize Unsigned32, x25DteOutPacketSize Unsigned32, x25DteInWindowSize Unsigned32, x25DteOutWindowSize Unsigned32, x25DteAcceptReverseCharging INTEGER, x25DteProposeReverseCharging INTEGER, x25DteOutThroughputClassSize INTEGER, x25DteInThroughputClassSize INTEGER, x25DteCugIndex AsciiString, x25DteCugoaIndex AsciiString, x25DteChargingInformation INTEGER, x25DteRpoa AsciiString, x25DteTrnstDlySlctnAInd Unsigned32, x25DteCallingNetworkFax HexString, x25DteCalledNetworkFax HexString, x25DteCallUserData HexString } x25DteInPacketSize OBJECT-TYPE SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum receive packet size in octets for the X.25 interface." DEFVAL { 128 } ::= { x25DteDcpEntry 1 } x25DteOutPacketSize OBJECT-TYPE SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum transmit packet size in octets for the X.25 interface." DEFVAL { 128 } ::= { x25DteDcpEntry 2 } x25DteInWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum receive window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing attribute is set to modulo128." DEFVAL { 2 } ::= { x25DteDcpEntry 3 } x25DteOutWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum transmit window size for the X.25 interface. A window size greater than 7 is only valid when the packetSequencing is set to modulo128." DEFVAL { 2 } ::= { x25DteDcpEntry 4 } x25DteAcceptReverseCharging OBJECT-TYPE SYNTAX INTEGER { accept(2), refuse(3), neverAccept(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether local end will accept or refuse charges for a call. A value of neverAccept is only used at the X.25 interface level and indicates that this interface will never accept reverse charging (that is no Peer component can override this parameter, allowing reverse charged calls to be accepted)." DEFVAL { refuse } ::= { x25DteDcpEntry 5 } x25DteProposeReverseCharging OBJECT-TYPE SYNTAX INTEGER { reverse(2), local(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether local/reverse charging is signalled in the call request packet." DEFVAL { local } ::= { x25DteDcpEntry 6 } x25DteOutThroughputClassSize OBJECT-TYPE SYNTAX INTEGER { n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value of the transmit throughput class to be negotiated. A value of notSpecified means the facility is not signalled." DEFVAL { notSpecified } ::= { x25DteDcpEntry 8 } x25DteInThroughputClassSize OBJECT-TYPE SYNTAX INTEGER { n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value of the receive throughput class to be negotiated. A value of notSpecified means the facility is not signalled." DEFVAL { notSpecified } ::= { x25DteDcpEntry 9 } x25DteCugIndex OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the index of the Closed User Group facility to signal. The index consists of two or four octets each representing a digit in the range of 0 to 9. A value of null (empty string) at the X.25 interface means no CUG facility is signalled. If a cugIndex is provisioned to be signalled, the cugoaIndex attribute must be null." DEFVAL { ''H } -- "" ::= { x25DteDcpEntry 10 } x25DteCugoaIndex OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the index of the Close User Group with Outgoing Access facility to signal. The index consists of two or four octets each representing a digit in the range of 0 to 9. A value of null (empty string) at the X.25 interface means no CUGOA facility is signalled. If a cugoaIndex is provisioned to be signalled, the cugIndex attribute must be null." DEFVAL { ''H } -- "" ::= { x25DteDcpEntry 11 } x25DteChargingInformation OBJECT-TYPE SYNTAX INTEGER { notSpecified(2), notRequested(3), requested(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the charging information facility is to be signalled in a call request packet. A value of notSpecified means the facility is not signalled. A value of notRequested means the facility is signalled but charging information is not requested (that is, the charging info field of the facility is set Off). A value of requested means the facility is signalled to explicitly request charging information." DEFVAL { notSpecified } ::= { x25DteDcpEntry 13 } x25DteRpoa OBJECT-TYPE SYNTAX AsciiString (SIZE (0..108)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value of the RPOA facility to signal in a call request packet. The value of null (empty string) at the X.25 interface means no RPOA facility is signalled." DEFVAL { ''H } -- "" ::= { x25DteDcpEntry 14 } x25DteTrnstDlySlctnAInd OBJECT-TYPE SYNTAX Unsigned32 (0..65536) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 at the X.25 interface level means no TDSAI facility is signalled." DEFVAL { 65536 } ::= { x25DteDcpEntry 15 } x25DteCallingNetworkFax OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Calling Network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no facilities are signalled." DEFVAL { ''H } -- "" ::= { x25DteDcpEntry 24 } x25DteCalledNetworkFax OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the called network facilities to be signalled in a call request packet. A value of null (empty string) at the X.25 interface means no facilities are signalled." DEFVAL { ''H } -- "" ::= { x25DteDcpEntry 25 } x25DteCallUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the user data to be signalled in the call request packet. A value of null (empty string) means no user data is signalled." DEFVAL { ''H } -- "" ::= { x25DteDcpEntry 26 } x25DteIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { x25Dte 24 } x25DteIfEntryEntry OBJECT-TYPE SYNTAX X25DteIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteIfEntryTable." INDEX { x25DteIndex } ::= { x25DteIfEntryTable 1 } X25DteIfEntryEntry ::= SEQUENCE { x25DteIfAdminStatus INTEGER, x25DteIfIndex InterfaceIndex } x25DteIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { x25DteIfEntryEntry 1 } x25DteIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { x25DteIfEntryEntry 2 } x25DteStateTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { x25Dte 25 } x25DteStateEntry OBJECT-TYPE SYNTAX X25DteStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteStateTable." INDEX { x25DteIndex } ::= { x25DteStateTable 1 } X25DteStateEntry ::= SEQUENCE { x25DteAdminState INTEGER, x25DteOperationalState INTEGER, x25DteUsageState INTEGER } x25DteAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { x25DteStateEntry 1 } x25DteOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { x25DteStateEntry 2 } x25DteUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { x25DteStateEntry 3 } x25DteOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { x25Dte 26 } x25DteOperStatusEntry OBJECT-TYPE SYNTAX X25DteOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteOperStatusTable." INDEX { x25DteIndex } ::= { x25DteOperStatusTable 1 } X25DteOperStatusEntry ::= SEQUENCE { x25DteSnmpOperStatus INTEGER } x25DteSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { x25DteOperStatusEntry 1 } x25DteOpTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational status of the X.25 interface." ::= { x25Dte 27 } x25DteOpEntry OBJECT-TYPE SYNTAX X25DteOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteOpTable." INDEX { x25DteIndex } ::= { x25DteOpTable 1 } X25DteOpEntry ::= SEQUENCE { x25DteInterfaceState INTEGER } x25DteInterfaceState OBJECT-TYPE SYNTAX INTEGER { notReady(0), localRestarting(1), remoteRestarting(2), ready(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the state of the interface. The notReady state, is the initial state of the service, when it is being initialized. The localRestarting state is entered when a Restart packet is sent to the link and the interface is waiting for a response. The remoteRestarting state is entered when a Restart packet is received from the link, and is being processed. In ready state, the service is operational and ready to provide service." ::= { x25DteOpEntry 1 } x25DteStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This component contains the statistics for the X.25 interface." ::= { x25Dte 28 } x25DteStatsEntry OBJECT-TYPE SYNTAX X25DteStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteStatsTable." INDEX { x25DteIndex } ::= { x25DteStatsTable 1 } X25DteStatsEntry ::= SEQUENCE { x25DteInCalls Counter32, x25DteInCallRefusals Counter32, x25DteInPrvdrInitiatedClrs Counter32, x25DteInRmtInitiatedRsts Counter32, x25DteInPrvdrInitiatedRsts Counter32, x25DteInRestarts Counter32, x25DteInDataPackets Counter32, x25DteInPktsAcusdOfPrtclErr Counter32, x25DteInInterruptPackets Counter32, x25DteOutCallAttempts Counter32, x25DteOutCallFailures Counter32, x25DteOutInterruptPackets Counter32, x25DteOutDataPackets Counter32, x25DteOutActiveChannels Counter32, x25DteInActiveChannels Counter32, x25DteTwowayActiveChannels Counter32, x25DteT20RestartTimeouts Counter32, x25DteT21CallTimeouts Counter32, x25DteT22ResetTimeouts Counter32, x25DteT23ClearTimeouts Counter32 } x25DteInCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of call packets received from link." ::= { x25DteStatsEntry 1 } x25DteInCallRefusals OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of calls received from the link which have been cleared. This includes calls cleared by the X.25 interface and calls cleared by the higher level." ::= { x25DteStatsEntry 2 } x25DteInPrvdrInitiatedClrs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of clear packets received from the link with a cause code other than DTE initiated." ::= { x25DteStatsEntry 3 } x25DteInRmtInitiatedRsts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of reset packets received from the link with the cause code DTE initiated." ::= { x25DteStatsEntry 4 } x25DteInPrvdrInitiatedRsts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of reset packets received from the link with the cause code other than DTE initiated." ::= { x25DteStatsEntry 5 } x25DteInRestarts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of restart packets received from the link while the service is in ready state." ::= { x25DteStatsEntry 6 } x25DteInDataPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of data packets received from link." ::= { x25DteStatsEntry 7 } x25DteInPktsAcusdOfPrtclErr OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of clear, reset, restart and diagnostic packets received from link containing a procedure error cause code." ::= { x25DteStatsEntry 8 } x25DteInInterruptPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attributes counts the number of interrupt packets received from link." ::= { x25DteStatsEntry 9 } x25DteOutCallAttempts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of call packets sent from this interface." ::= { x25DteStatsEntry 10 } x25DteOutCallFailures OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of call attempts from this interface that failed. This includes calls that were cleared because of restrictive fast select." ::= { x25DteStatsEntry 11 } x25DteOutInterruptPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of interrupt packets sent to the link." ::= { x25DteStatsEntry 12 } x25DteOutDataPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of data packets sent to the link." ::= { x25DteStatsEntry 13 } x25DteOutActiveChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of One-way Outgoing Channels that are currently in use. This counter includes the call requests that have not been accepted." ::= { x25DteStatsEntry 14 } x25DteInActiveChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates number of One-way Incoming Channels that are currently active." ::= { x25DteStatsEntry 15 } x25DteTwowayActiveChannels OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of Two-way Channels that are in use. This includes call requests sent but not yet accepted." ::= { x25DteStatsEntry 16 } x25DteT20RestartTimeouts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the T20 restart timer has expired." ::= { x25DteStatsEntry 17 } x25DteT21CallTimeouts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the T21 call timer has expired." ::= { x25DteStatsEntry 18 } x25DteT22ResetTimeouts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the T22 reset timer has expired." ::= { x25DteStatsEntry 19 } x25DteT23ClearTimeouts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the T23 clear timer has expired." ::= { x25DteStatsEntry 20 } -- -- X25Dte/n Peer/n -- -- This optional component defines the parameters to be used in -- setting up a switched circuit call to a particular remote destination. -- Multiple instances of this component can co-exist under the same -- X25Dte component. -- An instance of this component is needed for each remote host with -- which the X.25 Dte is to communicate (that is, each peer to which it -- may establish calls or from which it is to accept calls). x25DtePeer OBJECT IDENTIFIER ::= { x25Dte 2 } x25DtePeerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePeerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of x25DtePeer components." ::= { x25DtePeer 1 } x25DtePeerRowStatusEntry OBJECT-TYPE SYNTAX X25DtePeerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25DtePeer component." INDEX { x25DteIndex, x25DtePeerIndex } ::= { x25DtePeerRowStatusTable 1 } X25DtePeerRowStatusEntry ::= SEQUENCE { x25DtePeerRowStatus RowStatus, x25DtePeerComponentName DisplayString, x25DtePeerStorageType StorageType, x25DtePeerIndex Integer32 } x25DtePeerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25DtePeer components. These components can be added and deleted." ::= { x25DtePeerRowStatusEntry 1 } x25DtePeerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DtePeerRowStatusEntry 2 } x25DtePeerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25DtePeer tables." ::= { x25DtePeerRowStatusEntry 4 } x25DtePeerIndex OBJECT-TYPE SYNTAX Integer32 (1..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DtePeer tables." ::= { x25DtePeerRowStatusEntry 10 } x25DtePeerIfTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePeerIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the administrative set of parameters for the Peer interface." ::= { x25DtePeer 10 } x25DtePeerIfEntry OBJECT-TYPE SYNTAX X25DtePeerIfEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DtePeerIfTable." INDEX { x25DteIndex, x25DtePeerIndex } ::= { x25DtePeerIfTable 1 } X25DtePeerIfEntry ::= SEQUENCE { x25DtePeerEncAddressType INTEGER, x25DtePeerEncAddress AsciiString, x25DtePeerX25Address DigitString, x25DtePeerLinkToRemoteGroup Link } x25DtePeerEncAddressType OBJECT-TYPE SYNTAX INTEGER { ip(204) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication." DEFVAL { ip } ::= { x25DtePeerIfEntry 1 } x25DtePeerEncAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation address of the remote host with which this Peer component allows communication. This address must correspond with the encapsulation address type. Thus in the case of IP, it will contain a IP address." ::= { x25DtePeerIfEntry 2 } x25DtePeerX25Address OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the X.25 address that identifies the remote host with which this Peer component allows communication. The remote X.25 interface could be subdivided through the use of RemoteGroup components; in which case this x25Address is the X.25 address of the destination's RemoteGroup (not to be confused with the RemoteGroup indicated by the linkToRemoteGroup attribute of THIS Peer component)." ::= { x25DtePeerIfEntry 3 } x25DtePeerLinkToRemoteGroup OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This is a link to a RemoteGroup component. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and consequently a number of Virtual Routers) may share the same X.25 Interface into a Wide Area Network. In particular, the remote host identified by this Peer component is designated as belonging to the RemoteGroup linked by this attribute. The set of all Peer components and PermLcn components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router)." ::= { x25DtePeerIfEntry 4 } x25DtePeerCpTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePeerCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the call parameters used to establish a call to/ from the remote host identified by this Peer component" ::= { x25DtePeer 12 } x25DtePeerCpEntry OBJECT-TYPE SYNTAX X25DtePeerCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DtePeerCpTable." INDEX { x25DteIndex, x25DtePeerIndex } ::= { x25DtePeerCpTable 1 } X25DtePeerCpEntry ::= SEQUENCE { x25DtePeerInPacketSize Unsigned32, x25DtePeerOutPacketSize Unsigned32, x25DtePeerInWindowSize Unsigned32, x25DtePeerOutWindowSize Unsigned32, x25DtePeerAcceptReverseCharging INTEGER, x25DtePeerProposeReverseCharging INTEGER, x25DtePeerOutThroughputClassSize INTEGER, x25DtePeerInThroughputClassSize INTEGER, x25DtePeerCugIndex AsciiString, x25DtePeerCugoaIndex AsciiString, x25DtePeerNetworkUserIdentifier HexString, x25DtePeerChargingInformation INTEGER, x25DtePeerRpoa AsciiString, x25DtePeerTrnstDlySlctnAInd Unsigned32, x25DtePeerCallingNetworkFax HexString, x25DtePeerCalledNetworkFax HexString, x25DtePeerCallUserData HexString } x25DtePeerInPacketSize OBJECT-TYPE SYNTAX Unsigned32 (0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default maximum receive packet size in octets. A setting of 0 indicates the inPacketSize setting for the X.25 interface (in X25Dte component) is used during call setup to the remote host identified by this Peer component." DEFVAL { 128 } ::= { x25DtePeerCpEntry 1 } x25DtePeerOutPacketSize OBJECT-TYPE SYNTAX Unsigned32 (0 | 16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default maximum transmit packet size in octets. A setting of 0 indicates the outPacketSize setting for the X.25 interface (in the X25Dte component) is used during call setup to the remote host identified by this Peer component." DEFVAL { 128 } ::= { x25DtePeerCpEntry 2 } x25DtePeerInWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default receive window size. A window size of 0 indicates the inWindowSize setting for the X.25 interface (in the X25Dte component) is used during call setup to the remote host identified by this Peer component. A window size greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128." DEFVAL { 2 } ::= { x25DtePeerCpEntry 3 } x25DtePeerOutWindowSize OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default transmit window size. A window size of 0 indicates the outWindowSize setting for the X.25 interface is used during call setup to the Peer identified by this component. A window size greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128." DEFVAL { 2 } ::= { x25DtePeerCpEntry 4 } x25DtePeerAcceptReverseCharging OBJECT-TYPE SYNTAX INTEGER { default(1), accept(2), refuse(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the local end will accept or refuse charges for a call from the remote host identified by this Peer component. A value of default indicates the use of the acceptReverseCharging value from the X25Dte component. If the value at the X25Dte level is neverAccept, a value of accept in this Peer component will be ignored because no reverse charge calls are to be accepted by this X.25 Dte." DEFVAL { refuse } ::= { x25DtePeerCpEntry 5 } x25DtePeerProposeReverseCharging OBJECT-TYPE SYNTAX INTEGER { default(1), reverse(2), local(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether local/reverse charging is signalled in a call request packet. A value of default indicates the use of the value from the proposeReverseCharging attribute of the X25Dte component." DEFVAL { local } ::= { x25DtePeerCpEntry 6 } x25DtePeerOutThroughputClassSize OBJECT-TYPE SYNTAX INTEGER { n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17), default(18) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value of the transmit throughput class to be negotiated. A value of default indicates the use of the value from the outThroughputClassSize attribute of the X25Dte component. A value of notSpecified means the facility is not signalled." DEFVAL { notSpecified } ::= { x25DtePeerCpEntry 8 } x25DtePeerInThroughputClassSize OBJECT-TYPE SYNTAX INTEGER { n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17), default(18) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value of the receive throughput class to be negotiated. A value of default indicates the use of the value from the inThroughputClassSize attribute of the X25Dte component. A value of notSpecified means the facility is not signalled." DEFVAL { notSpecified } ::= { x25DtePeerCpEntry 9 } x25DtePeerCugIndex OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the index of the Closed User Group facility to signal. A value of 'DEF' indicates the use of the value from the cugIndex attribute of the X25Dte component. A value of null (empty string) indicates no CUG facility is to be signalled. If a cugIndex is provisioned to be signalled, the cugoaIndex attribute must be null." DEFVAL { ''H } -- "" ::= { x25DtePeerCpEntry 10 } x25DtePeerCugoaIndex OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the index of the Closed User Group with Outgoing Access facility to signal. A value of 'DEF' indicates the use of the value from the cugoaIndex attribute of the X25Dte component. A value of null (empty string) indicates no CUGOA facility is to be signalled. If a cugoaIndex is provisioned to be signalled, the cugIndex attribute must be null." DEFVAL { ''H } -- "" ::= { x25DtePeerCpEntry 11 } x25DtePeerNetworkUserIdentifier OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Network User Identifier facility to signal. A value of null (empty string) indicates no NUI facility is to be signalled." DEFVAL { ''H } -- "" ::= { x25DtePeerCpEntry 12 } x25DtePeerChargingInformation OBJECT-TYPE SYNTAX INTEGER { default(1), notSpecified(2), notRequested(3), requested(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the charging information facility is signalled in the call request packet. A value of default indicates the use of the value from the chargingInformation attribute of the X25Dte component. A value of notSpecified means the facility is not signalled. A value of notRequested means the facility is signalled but charging information is not requested (that is, the charging info field of the facility is set Off). A value of requested means the facility is signalled to explicitly request charging information." DEFVAL { notSpecified } ::= { x25DtePeerCpEntry 13 } x25DtePeerRpoa OBJECT-TYPE SYNTAX AsciiString (SIZE (0..108)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the RPOA facility to signal in a call request packet. A value of 'DEF' indicates the use of the value from the rpoa attribute of the X25Dte component. A value of null (empty string) indicates no RPOA facility is to be signalled." DEFVAL { ''H } -- "" ::= { x25DtePeerCpEntry 14 } x25DtePeerTrnstDlySlctnAInd OBJECT-TYPE SYNTAX Unsigned32 (0..65537) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the value of the Transit Delay Selection and Indication facility to signal in a call request packet. A value of 65536 indicates no facility is signalled. A value of 65537 indicates the use of the value from the trnstDlySlctnAInd attribute of the X25Dte component." DEFVAL { 65536 } ::= { x25DtePeerCpEntry 15 } x25DtePeerCallingNetworkFax OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Calling Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the call packet. These facilities do not include the marker facility code. A value of null (empty string) indicates the callingNetworkFax from the X25Dte are to be signalled. If that value is also null, no Calling Network Facilities are signalled." DEFVAL { ''H } -- "" ::= { x25DtePeerCpEntry 24 } x25DtePeerCalledNetworkFax OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Called Network facilities to signal in a call request packet. The facilities are encoded here exactly as they are encoded in the call packet. These facilities do not include the marker facility code. A value of null (empty string) indicates the calledNetworkFax from the X25Dte are to be signalled. If that value is also null, no Called Network Facilities are signalled." DEFVAL { ''H } -- "" ::= { x25DtePeerCpEntry 25 } x25DtePeerCallUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the user data to signal in a call request packet. A value of null (empty string) indicates that the callUserData from the X25Dte is to be signalled. If callUserData of the X25Dte component is also null and protocolEncType of this Peer has the value IP, H.CC will be signalled as the call user data of a call request packet. Thus for IP encapsulation according to RFC1356, both the callUserData from the Peer and X25Dte components must be null and the protocolEncType set to IP." DEFVAL { ''H } -- "" ::= { x25DtePeerCpEntry 26 } x25DtePeerPEncTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePeerPEncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each instance of this replicated attribute describes an encapsulation method permitted for encapsulating the protocol data units (PDUs) of an upper layer protocol when communicating with the remote host identified by this Peer component. The index of a given replicated instance of this attribute represents the relative priority of the encapsulation method specified by the given attribute instance. An attribute with index '1' has the highest priority, so the encapsulation method described by it will be the first one attempted when signalling a call to the link. If the protocolEncType is set to IP to encapsulate IP traffic according to RFC1356, the callUserData for this Peer component and the X25Dte component must both be null, so that H.CC will be signalled as the call user data of the call request. This indicates that the protocol encapsulation type of IP is to be used for the channel. A call received from the link will be accepted as long as the encapsulation method indicated in the call user data of the incoming call packet is included in one of these replicated attributes. (This presupposes that the incoming call has been directed to the RemoteGroup to which this Peer is linked through the linkToRemoteGroup attribute.)" ::= { x25DtePeer 208 } x25DtePeerPEncEntry OBJECT-TYPE SYNTAX X25DtePeerPEncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DtePeerPEncTable." INDEX { x25DteIndex, x25DtePeerIndex, x25DtePeerPEncIndex } ::= { x25DtePeerPEncTable 1 } X25DtePeerPEncEntry ::= SEQUENCE { x25DtePeerPEncIndex Integer32, x25DtePeerPEncValue INTEGER, x25DtePeerPEncRowStatus RowStatus } x25DtePeerPEncIndex OBJECT-TYPE SYNTAX Integer32 (1..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DtePeerPEncTable." ::= { x25DtePeerPEncEntry 1 } x25DtePeerPEncValue OBJECT-TYPE SYNTAX INTEGER { ip(204) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents an individual value for the x25DtePeerPEncTable." ::= { x25DtePeerPEncEntry 2 } x25DtePeerPEncRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the x25DtePeerPEncTable." ::= { x25DtePeerPEncEntry 3 } x25DtePeerLcnTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePeerLcnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute specifies the local logical channel numbers (Lcn) in use for the X.25 calls to the remote host identified by this Peer component." ::= { x25DtePeer 209 } x25DtePeerLcnEntry OBJECT-TYPE SYNTAX X25DtePeerLcnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DtePeerLcnTable." INDEX { x25DteIndex, x25DtePeerIndex, x25DtePeerLcnValue } ::= { x25DtePeerLcnTable 1 } X25DtePeerLcnEntry ::= SEQUENCE { x25DtePeerLcnValue Integer32 } x25DtePeerLcnValue OBJECT-TYPE SYNTAX Integer32 (1..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the x25DtePeerLcnTable." ::= { x25DtePeerLcnEntry 1 } -- -- X25Dte/n PermLcn/n -- -- This component defines the parameters required for the Permanent -- logical channels of an X.25 interface. x25DtePLcn OBJECT IDENTIFIER ::= { x25Dte 3 } x25DtePLcnRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePLcnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of x25DtePLcn components." ::= { x25DtePLcn 1 } x25DtePLcnRowStatusEntry OBJECT-TYPE SYNTAX X25DtePLcnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25DtePLcn component." INDEX { x25DteIndex, x25DtePLcnIndex } ::= { x25DtePLcnRowStatusTable 1 } X25DtePLcnRowStatusEntry ::= SEQUENCE { x25DtePLcnRowStatus RowStatus, x25DtePLcnComponentName DisplayString, x25DtePLcnStorageType StorageType, x25DtePLcnIndex Integer32 } x25DtePLcnRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25DtePLcn components. These components can be added and deleted." ::= { x25DtePLcnRowStatusEntry 1 } x25DtePLcnComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DtePLcnRowStatusEntry 2 } x25DtePLcnStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25DtePLcn tables." ::= { x25DtePLcnRowStatusEntry 4 } x25DtePLcnIndex OBJECT-TYPE SYNTAX Integer32 (1..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DtePLcn tables." ::= { x25DtePLcnRowStatusEntry 10 } x25DtePLcnProvTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePLcnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable parameters for the permanent logical channels (PLcns) on the X.25 interface (corresponding to Permanent Virtual Circuits (PVCs) provisioned on the Wide Area Network)." ::= { x25DtePLcn 10 } x25DtePLcnProvEntry OBJECT-TYPE SYNTAX X25DtePLcnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DtePLcnProvTable." INDEX { x25DteIndex, x25DtePLcnIndex } ::= { x25DtePLcnProvTable 1 } X25DtePLcnProvEntry ::= SEQUENCE { x25DtePLcnEncAddressType INTEGER, x25DtePLcnEncAddress AsciiString, x25DtePLcnProtocolEncType INTEGER, x25DtePLcnLinkToRemoteGroup Link, x25DtePLcnInPacketSize Unsigned32, x25DtePLcnOutPacketSize Unsigned32, x25DtePLcnInWindowSize Unsigned32, x25DtePLcnOutWindowSize Unsigned32 } x25DtePLcnEncAddressType OBJECT-TYPE SYNTAX INTEGER { none(0), ip(204) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation type for the address of the remote host with which this Peer component allows communication." DEFVAL { ip } ::= { x25DtePLcnProvEntry 1 } x25DtePLcnEncAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation address of the remote host with which this PermLcn component defines a connection" ::= { x25DtePLcnProvEntry 2 } x25DtePLcnProtocolEncType OBJECT-TYPE SYNTAX INTEGER { null(0), ip(204), nscNull(257) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the encapsulation method to use when exchanging protocol data units (PDUs) over this channel. IP and Null protocolEncTypes are as defined in RFC1356. NscNull is an encapsulation method for carrying IP datagrams which requires removing 3 padding octets of zeroes and the protocol identifier H.CC from the front of each data packet received from the link in order to obtain the PDU. PDUs sent to the link are propounded by a the protocol identifier H.CC. NscNull should only be set when the remote host is following this same encapsulation method." DEFVAL { ip } ::= { x25DtePLcnProvEntry 3 } x25DtePLcnLinkToRemoteGroup OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the link to the RemoteGroup, indicating the RemoteGroup component with which this PermLcn component is associated. The RemoteGroup components logically divide up the X.25 Interface such that a number of Protocol Ports (and consequently a number of Virtual Routers) may share the same X.25 Interface into a Wide Area Network. In particular, the remote host identified by this PermLcn component is designated as belonging to the RemoteGroup linked by this attribute. The set of all PermLcn and Peer components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router)." ::= { x25DtePLcnProvEntry 4 } x25DtePLcnInPacketSize OBJECT-TYPE SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum receive packet size in octets." DEFVAL { 128 } ::= { x25DtePLcnProvEntry 5 } x25DtePLcnOutPacketSize OBJECT-TYPE SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum transmit packet size in octets." DEFVAL { 128 } ::= { x25DtePLcnProvEntry 6 } x25DtePLcnInWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum receive window size. A inWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128." DEFVAL { 2 } ::= { x25DtePLcnProvEntry 7 } x25DtePLcnOutWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum transmit window size. A outWindowSize greater than 7 is only valid when the packetSequencing attribute of the X25Dte component is set to modulo128." DEFVAL { 2 } ::= { x25DtePLcnProvEntry 8 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- -- X25Dte/x Lcn/x -- -- This component contains information about a specific logical -- channel of an X.25 interface. x25DteLcn OBJECT IDENTIFIER ::= { x25Dte 4 } x25DteLcnRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLcnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of x25DteLcn components." ::= { x25DteLcn 1 } x25DteLcnRowStatusEntry OBJECT-TYPE SYNTAX X25DteLcnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25DteLcn component." INDEX { x25DteIndex, x25DteLcnIndex } ::= { x25DteLcnRowStatusTable 1 } X25DteLcnRowStatusEntry ::= SEQUENCE { x25DteLcnRowStatus RowStatus, x25DteLcnComponentName DisplayString, x25DteLcnStorageType StorageType, x25DteLcnIndex Integer32 } x25DteLcnRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25DteLcn components. These components cannot be added nor deleted." ::= { x25DteLcnRowStatusEntry 1 } x25DteLcnComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DteLcnRowStatusEntry 2 } x25DteLcnStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25DteLcn tables." ::= { x25DteLcnRowStatusEntry 4 } x25DteLcnIndex OBJECT-TYPE SYNTAX Integer32 (1..4095) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DteLcn tables." ::= { x25DteLcnRowStatusEntry 10 } x25DteLcnStateTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLcnStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { x25DteLcn 10 } x25DteLcnStateEntry OBJECT-TYPE SYNTAX X25DteLcnStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLcnStateTable." INDEX { x25DteIndex, x25DteLcnIndex } ::= { x25DteLcnStateTable 1 } X25DteLcnStateEntry ::= SEQUENCE { x25DteLcnAdminState INTEGER, x25DteLcnOperationalState INTEGER, x25DteLcnUsageState INTEGER } x25DteLcnAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { x25DteLcnStateEntry 1 } x25DteLcnOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { x25DteLcnStateEntry 2 } x25DteLcnUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { x25DteLcnStateEntry 3 } x25DteLcnCpTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLcnCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the call parameters that are in use for this logical channel. For a PVC only the packet size and the window size attributes are meaningful." ::= { x25DteLcn 11 } x25DteLcnCpEntry OBJECT-TYPE SYNTAX X25DteLcnCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLcnCpTable." INDEX { x25DteIndex, x25DteLcnIndex } ::= { x25DteLcnCpTable 1 } X25DteLcnCpEntry ::= SEQUENCE { x25DteLcnInPacketSize Unsigned32, x25DteLcnOutPacketSize Unsigned32, x25DteLcnInWindowSize Unsigned32, x25DteLcnOutWindowSize Unsigned32, x25DteLcnProposeReverseCharging INTEGER, x25DteLcnFastSelect INTEGER, x25DteLcnOutThroughputClassSize INTEGER, x25DteLcnInThroughputClassSize INTEGER, x25DteLcnCugIndex AsciiString, x25DteLcnCugoaIndex AsciiString, x25DteLcnNetworkUserIdentifier HexString, x25DteLcnChargingInformation INTEGER, x25DteLcnRpoa AsciiString, x25DteLcnTrnstDlySlctnAInd Unsigned32, x25DteLcnCallingNetworkFax HexString, x25DteLcnCalledNetworkFax HexString, x25DteLcnCallUserData HexString } x25DteLcnInPacketSize OBJECT-TYPE SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum receive packet size in octets." ::= { x25DteLcnCpEntry 1 } x25DteLcnOutPacketSize OBJECT-TYPE SYNTAX Unsigned32 (16 | 32 | 64 | 128 | 256 | 512 | 1024 | 2048 | 4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum transmit packet size in octets." ::= { x25DteLcnCpEntry 2 } x25DteLcnInWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the receive window size." ::= { x25DteLcnCpEntry 3 } x25DteLcnOutWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the transmit window size." ::= { x25DteLcnCpEntry 4 } x25DteLcnProposeReverseCharging OBJECT-TYPE SYNTAX INTEGER { reverse(2), local(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Specifies whether local/reverse charging was negotiated for this logical channel. To determine which end of the channel is paying for the call, this attribute must be examined in combination with the callDirection attribute. For example, if this attribute is set to reverse and the callDirection attribute indicates incoming, it means the incoming call signalled reverse charging, so the local end of the channel is being charged. On the other, if the value of this attribute is reverse and the callDirection is outgoing, it means that the call request sent to the link signalled reverse charging; so the remote end is charged. Similarly, a value of local must also be interpreted in combination with the callDirection to determine which end is being charged. If the value of the callDirection attribute is plcn, the proposeReverseCharging attribute is meaningless." DEFVAL { local } ::= { x25DteLcnCpEntry 5 } x25DteLcnFastSelect OBJECT-TYPE SYNTAX INTEGER { unrestricted(3), restricted(4), no(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the fast select was used in establishing this logical channel." DEFVAL { no } ::= { x25DteLcnCpEntry 6 } x25DteLcnOutThroughputClassSize OBJECT-TYPE SYNTAX INTEGER { n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the transmit throughput class." DEFVAL { notSpecified } ::= { x25DteLcnCpEntry 7 } x25DteLcnInThroughputClassSize OBJECT-TYPE SYNTAX INTEGER { n75(3), n150(4), n300(5), n600(6), n1200(7), n2400(8), n4800(9), n9600(10), n19200(11), n48000(12), n64000(13), notSpecified(17) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the receive throughput class." DEFVAL { notSpecified } ::= { x25DteLcnCpEntry 8 } x25DteLcnCugIndex OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the index of the Closed User Group facility used in establishing this logical channel." DEFVAL { ''H } -- "" ::= { x25DteLcnCpEntry 9 } x25DteLcnCugoaIndex OBJECT-TYPE SYNTAX AsciiString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the index of the Closed User Group with Outgoing Access facility used in establishing this logical channel." DEFVAL { ''H } -- "" ::= { x25DteLcnCpEntry 10 } x25DteLcnNetworkUserIdentifier OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-only STATUS mandatory DESCRIPTION "Specifies the Network User Identifier used for this logical channel." DEFVAL { ''H } -- "" ::= { x25DteLcnCpEntry 11 } x25DteLcnChargingInformation OBJECT-TYPE SYNTAX INTEGER { notSpecified(2), notRequested(3), requested(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether or not the charging information facility was used in establishing this logical channel. A value of notSpecified means the facility was not signalled. A value of notRequested means the facility was signalled but charging information was not requested (that is, the charging info field of the facility was set Off). A value of requested means the facility was signalled to explicitly request charging information. DESCRIPTION" DEFVAL { notSpecified } ::= { x25DteLcnCpEntry 12 } x25DteLcnRpoa OBJECT-TYPE SYNTAX AsciiString (SIZE (0..108)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the RPOA facility which was signalled in establishing this logical channel." DEFVAL { ''H } -- "" ::= { x25DteLcnCpEntry 13 } x25DteLcnTrnstDlySlctnAInd OBJECT-TYPE SYNTAX Unsigned32 (0..65536) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Transit Delay Selection and Indication value used for this logical channel. A value of 65536 means no facility was signalled." DEFVAL { 65536 } ::= { x25DteLcnCpEntry 14 } x25DteLcnCallingNetworkFax OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Calling Network facilities which were signalled in the call packet. A value of null (empty string) means no calling network facilities were signalled." DEFVAL { ''H } -- "" ::= { x25DteLcnCpEntry 23 } x25DteLcnCalledNetworkFax OBJECT-TYPE SYNTAX HexString (SIZE (0..108)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the called network facilities which were signalled in the call packet. A value of null (empty string) means no called network facilities were signalled." DEFVAL { ''H } -- "" ::= { x25DteLcnCpEntry 24 } x25DteLcnCallUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..128)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the user data which was signalled in the call packet. A value of null (empty string) means no user data was signalled." DEFVAL { ''H } -- "" ::= { x25DteLcnCpEntry 25 } x25DteLcnLcnStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLcnLcnStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the status for an X.25 Logical Channel." ::= { x25DteLcn 12 } x25DteLcnLcnStatusEntry OBJECT-TYPE SYNTAX X25DteLcnLcnStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLcnLcnStatusTable." INDEX { x25DteIndex, x25DteLcnIndex } ::= { x25DteLcnLcnStatusTable 1 } X25DteLcnLcnStatusEntry ::= SEQUENCE { x25DteLcnStatus INTEGER, x25DteLcnCallDirection INTEGER, x25DteLcnCalledAddress DigitString, x25DteLcnCallingAddress DigitString, x25DteLcnOriginalCalledAddress DigitString } x25DteLcnStatus OBJECT-TYPE SYNTAX INTEGER { closed(2), calling(3), dataTransfer(4), clearing(5), resetting(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current state of the logical channel." ::= { x25DteLcnLcnStatusEntry 1 } x25DteLcnCallDirection OBJECT-TYPE SYNTAX INTEGER { incoming(1), outgoing(2), permanentLcn(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the direction of the call that caused the establishment of this channel." ::= { x25DteLcnLcnStatusEntry 3 } x25DteLcnCalledAddress OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the called X.25 address to which the call is established." ::= { x25DteLcnLcnStatusEntry 4 } x25DteLcnCallingAddress OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the calling X.25 address from which the call originated" ::= { x25DteLcnLcnStatusEntry 5 } x25DteLcnOriginalCalledAddress OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the X.25 address of the originally called DTE to which the call was attempted. This could be different from the value of the calledAddress attribute in the case where the original call was redirected." ::= { x25DteLcnLcnStatusEntry 6 } x25DteLcnStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLcnStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for an X.25 Logical Channel." ::= { x25DteLcn 13 } x25DteLcnStatsEntry OBJECT-TYPE SYNTAX X25DteLcnStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLcnStatsTable." INDEX { x25DteIndex, x25DteLcnIndex } ::= { x25DteLcnStatsTable 1 } X25DteLcnStatsEntry ::= SEQUENCE { x25DteLcnInUknownProtocols Counter32, x25DteLcnInDataOctets Counter32, x25DteLcnInDataPackets Counter32, x25DteLcnInRmtInitiatedRsts Counter32, x25DteLcnInPrvdrInitiatedRsts Counter32, x25DteLcnInInterruptPackets Counter32, x25DteLcnOutDataOctets Counter32, x25DteLcnOutDataPackets Counter32, x25DteLcnOutInterruptPackets Counter32, x25DteLcnT22ResetTimeouts Counter32 } x25DteLcnInUknownProtocols OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number packets received from link which were discareded because of an unkown or unsupported protocols." ::= { x25DteLcnStatsEntry 1 } x25DteLcnInDataOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets of user data received from the link." ::= { x25DteLcnStatsEntry 2 } x25DteLcnInDataPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of data packets received from the link." ::= { x25DteLcnStatsEntry 3 } x25DteLcnInRmtInitiatedRsts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of reset packets, with a cause code of 'DTE initiated', which were received from the link" ::= { x25DteLcnStatsEntry 4 } x25DteLcnInPrvdrInitiatedRsts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of reset packets, with a cause code other than 'DTE initiated', which were received from the link." ::= { x25DteLcnStatsEntry 5 } x25DteLcnInInterruptPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of interrupt packets received from the link." ::= { x25DteLcnStatsEntry 6 } x25DteLcnOutDataOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of octets of user data sent to the link." ::= { x25DteLcnStatsEntry 7 } x25DteLcnOutDataPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of data packets sent to link." ::= { x25DteLcnStatsEntry 8 } x25DteLcnOutInterruptPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of interrupt packets sent to link." ::= { x25DteLcnStatsEntry 9 } x25DteLcnT22ResetTimeouts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the t22 reset timer has expired." ::= { x25DteLcnStatsEntry 10 } -- -- This component defines the LAPB protocol and its related service -- options. x25DteLapb OBJECT IDENTIFIER ::= { x25Dte 5 } x25DteLapbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of x25DteLapb components." ::= { x25DteLapb 1 } x25DteLapbRowStatusEntry OBJECT-TYPE SYNTAX X25DteLapbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25DteLapb component." INDEX { x25DteIndex, x25DteLapbIndex } ::= { x25DteLapbRowStatusTable 1 } X25DteLapbRowStatusEntry ::= SEQUENCE { x25DteLapbRowStatus RowStatus, x25DteLapbComponentName DisplayString, x25DteLapbStorageType StorageType, x25DteLapbIndex NonReplicated } x25DteLapbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25DteLapb components. These components cannot be added nor deleted." ::= { x25DteLapbRowStatusEntry 1 } x25DteLapbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DteLapbRowStatusEntry 2 } x25DteLapbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25DteLapb tables." ::= { x25DteLapbRowStatusEntry 4 } x25DteLapbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DteLapb tables." ::= { x25DteLapbRowStatusEntry 10 } x25DteLapbCpTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "X25Dte/n Lapb This group contains the set of configuration parameters for the LAPB interface." ::= { x25DteLapb 10 } x25DteLapbCpEntry OBJECT-TYPE SYNTAX X25DteLapbCpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbCpTable." INDEX { x25DteIndex, x25DteLapbIndex } ::= { x25DteLapbCpTable 1 } X25DteLapbCpEntry ::= SEQUENCE { x25DteLapbStationType INTEGER, x25DteLapbFrameSequencing INTEGER, x25DteLapbN1FrameSize Unsigned32, x25DteLapbKWindowSize Unsigned32, x25DteLapbN2TransmitLimit Unsigned32, x25DteLapbT1AckTimer Unsigned32, x25DteLapbT2AckDelayTimer Unsigned32, x25DteLapbT4IdleProbeTimer Unsigned32, x25DteLapbActionInitiate INTEGER, x25DteLapbActionRecvDM INTEGER, x25DteLapbTxQDegradeThreshold Unsigned32, x25DteLapbTxQResetThreshold Unsigned32 } x25DteLapbStationType OBJECT-TYPE SYNTAX INTEGER { dte(1), dce(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the DCE or the DTE role of operation for the LAPB interface. Changing this attribute will cause the lapb link to Reset." DEFVAL { dte } ::= { x25DteLapbCpEntry 1 } x25DteLapbFrameSequencing OBJECT-TYPE SYNTAX INTEGER { modulo8(1), modulo128(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the modulo of the frame sequence numbering of the LAPB interface. Changing this attribute will cause the lapb link to Reset." DEFVAL { modulo8 } ::= { x25DteLapbCpEntry 2 } x25DteLapbN1FrameSize OBJECT-TYPE SYNTAX Unsigned32 (40..32856) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum frame size in bits that can be transmitted or received. This value must be greater than or equal to the maximum packet size across the interface(in bits)+ max level 3 header size(in bits)+ max level 2 header size(in bits)+ crc in bits. (max Pkt size + -------------> 4096*8 max level 3 header size + ---> 4*8 level 2 header size + --------> 5*8 crc -------------------> 2*8)" DEFVAL { 32856 } ::= { x25DteLapbCpEntry 3 } x25DteLapbKWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time. A window size of greater than 7 is only valid when the sequence numbering of frames is modulo 128." DEFVAL { 7 } ::= { x25DteLapbCpEntry 4 } x25DteLapbN2TransmitLimit OBJECT-TYPE SYNTAX Unsigned32 (1..20) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of times a frame can be transmitted before appropriate recovery action is taken." DEFVAL { 10 } ::= { x25DteLapbCpEntry 5 } x25DteLapbT1AckTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the period in milliseconds within which an acknowledgment of a sent frame must be received. The value set for t1 ack timer must be less than the value set for the t4 idle probe timer." DEFVAL { 3000 } ::= { x25DteLapbCpEntry 6 } x25DteLapbT2AckDelayTimer OBJECT-TYPE SYNTAX Unsigned32 (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum period in milliseconds permissible to wait before sending an acknowledgment for a received in sequenced I-frame. A value of 0 means there will be no delay in acknowledgment." DEFVAL { 0 } ::= { x25DteLapbCpEntry 7 } x25DteLapbT4IdleProbeTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..65535000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time period in milliseconds the link will be permitted to remain idle (that is, no frames are exchanged on the data link). Upon expiry of this timer, LAPB will poll its peer for status. The value set for t4 idle probe timer must be greater than the value set for the t1 ack timer." DEFVAL { 60000 } ::= { x25DteLapbCpEntry 8 } x25DteLapbActionInitiate OBJECT-TYPE SYNTAX INTEGER { sendSABM(1), sendDM(3), none(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action to be taken by the LAPB interface to initiate link setup." DEFVAL { sendSABM } ::= { x25DteLapbCpEntry 9 } x25DteLapbActionRecvDM OBJECT-TYPE SYNTAX INTEGER { sendSABM(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the action to be taken by the LAPB interface when it receives a DM response." DEFVAL { sendSABM } ::= { x25DteLapbCpEntry 10 } x25DteLapbTxQDegradeThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..65536) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate a service degrade alarm. A value of 65536 means no threshold." DEFVAL { 65536 } ::= { x25DteLapbCpEntry 11 } x25DteLapbTxQResetThreshold OBJECT-TYPE SYNTAX Unsigned32 (1..65536) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the threshold of the number of higher layer packets queued, beyond which LAPB should initiate an overload alarm and reset the link. A value of 65536 means no threshold." DEFVAL { 65536 } ::= { x25DteLapbCpEntry 12 } x25DteLapbStateTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { x25DteLapb 11 } x25DteLapbStateEntry OBJECT-TYPE SYNTAX X25DteLapbStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbStateTable." INDEX { x25DteIndex, x25DteLapbIndex } ::= { x25DteLapbStateTable 1 } X25DteLapbStateEntry ::= SEQUENCE { x25DteLapbAdminState INTEGER, x25DteLapbOperationalState INTEGER, x25DteLapbUsageState INTEGER } x25DteLapbAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { x25DteLapbStateEntry 1 } x25DteLapbOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { x25DteLapbStateEntry 2 } x25DteLapbUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { x25DteLapbStateEntry 3 } x25DteLapbStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the status for the LAPB interface." ::= { x25DteLapb 12 } x25DteLapbStatusEntry OBJECT-TYPE SYNTAX X25DteLapbStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbStatusTable." INDEX { x25DteIndex, x25DteLapbIndex } ::= { x25DteLapbStatusTable 1 } X25DteLapbStatusEntry ::= SEQUENCE { x25DteLapbCurrentState INTEGER, x25DteLapbLastStateChangeReason INTEGER, x25DteLapbFrmrTransmit HexString, x25DteLapbFrmrReceive HexString, x25DteLapbCurrentQueueSize Unsigned32 } x25DteLapbCurrentState OBJECT-TYPE SYNTAX INTEGER { disconnected(1), linkSetup(2), frameReject(3), disconnectRequest(4), informationTransfer(5), waitingAck(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the current state of the LAPB interface." ::= { x25DteLapbStatusEntry 1 } x25DteLapbLastStateChangeReason OBJECT-TYPE SYNTAX INTEGER { notStarted(1), abmEntered(2), abmeEntered(3), abmReset(4), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), frmrSent(11), n2TimeOut(12), other(13) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the reason for the most recent state change." ::= { x25DteLapbStatusEntry 2 } x25DteLapbFrmrTransmit OBJECT-TYPE SYNTAX HexString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the Information field of the FRMR most recently sent." DEFVAL { ''H } -- "" ::= { x25DteLapbStatusEntry 3 } x25DteLapbFrmrReceive OBJECT-TYPE SYNTAX HexString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the Information field of the FRMR most recently received." DEFVAL { ''H } -- "" ::= { x25DteLapbStatusEntry 4 } x25DteLapbCurrentQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the number of packets on the lapb transmit queue." ::= { x25DteLapbStatusEntry 5 } x25DteLapbStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistics for the LAPB interface." ::= { x25DteLapb 13 } x25DteLapbStatsEntry OBJECT-TYPE SYNTAX X25DteLapbStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbStatsTable." INDEX { x25DteIndex, x25DteLapbIndex } ::= { x25DteLapbStatsTable 1 } X25DteLapbStatsEntry ::= SEQUENCE { x25DteLapbStateChanges Counter32, x25DteLapbRemoteBusy Counter32, x25DteLapbTransmitRejectFrames Counter32, x25DteLapbReceiveRejectFrames Counter32, x25DteLapbT1AckTimeout Counter32 } x25DteLapbStateChanges OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times LAPB state has changed. Refer to the attribute 'linkState' for the set of possible states." ::= { x25DteLapbStatsEntry 1 } x25DteLapbRemoteBusy OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times transmission of an I-frame was un-successful due to a perceived remote busy condition (window closed or remote busy)." ::= { x25DteLapbStatsEntry 2 } x25DteLapbTransmitRejectFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of REJ frames sent by the interface." ::= { x25DteLapbStatsEntry 3 } x25DteLapbReceiveRejectFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of REJ frames received by the interface." ::= { x25DteLapbStatsEntry 4 } x25DteLapbT1AckTimeout OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the T1 timer has expired." ::= { x25DteLapbStatsEntry 5 } -- -- X25Dte/n Lapb Framer -- -- The Framer component controls link layer framing for application -- components sending and receiving data on a link interface. It is also -- through Framer, that an application component is associated with a -- specific hardware link interface. -- -- The Framer component provides provisionable attributes related to -- datapath aspects of the hardware interface (such as crc and frame -- length) rather than interface specific attributes (such as modem -- leads and clocking) which are associated with specific hardware -- components (such as V35/n or DS1/n). The Framer component also -- provides a provisionable attribute which binds the application -- component to a specific hardware component. -- -- The Framer component contains operational attributes for link -- interface datapath statistics (such as frame counts and aborts). -- x25DteLapbFramer OBJECT IDENTIFIER ::= { x25DteLapb 2 } x25DteLapbFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of x25DteLapbFramer components." ::= { x25DteLapbFramer 1 } x25DteLapbFramerRowStatusEntry OBJECT-TYPE SYNTAX X25DteLapbFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25DteLapbFramer component." INDEX { x25DteIndex, x25DteLapbIndex, x25DteLapbFramerIndex } ::= { x25DteLapbFramerRowStatusTable 1 } X25DteLapbFramerRowStatusEntry ::= SEQUENCE { x25DteLapbFramerRowStatus RowStatus, x25DteLapbFramerComponentName DisplayString, x25DteLapbFramerStorageType StorageType, x25DteLapbFramerIndex NonReplicated } x25DteLapbFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25DteLapbFramer components. These components cannot be added nor deleted." ::= { x25DteLapbFramerRowStatusEntry 1 } x25DteLapbFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DteLapbFramerRowStatusEntry 2 } x25DteLapbFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25DteLapbFramer tables." ::= { x25DteLapbFramerRowStatusEntry 4 } x25DteLapbFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DteLapbFramer tables." ::= { x25DteLapbFramerRowStatusEntry 10 } x25DteLapbFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups." ::= { x25DteLapbFramer 10 } x25DteLapbFramerProvEntry OBJECT-TYPE SYNTAX X25DteLapbFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbFramerProvTable." INDEX { x25DteIndex, x25DteLapbIndex, x25DteLapbFramerIndex } ::= { x25DteLapbFramerProvTable 1 } X25DteLapbFramerProvEntry ::= SEQUENCE { x25DteLapbFramerInterfaceName Link } x25DteLapbFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run." ::= { x25DteLapbFramerProvEntry 1 } x25DteLapbFramerLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbFramerLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes defining the framing of data on the link interface." ::= { x25DteLapbFramer 11 } x25DteLapbFramerLinkEntry OBJECT-TYPE SYNTAX X25DteLapbFramerLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbFramerLinkTable." INDEX { x25DteIndex, x25DteLapbIndex, x25DteLapbFramerIndex } ::= { x25DteLapbFramerLinkTable 1 } X25DteLapbFramerLinkEntry ::= SEQUENCE { x25DteLapbFramerFlagsBetweenFrames Unsigned32 } x25DteLapbFramerFlagsBetweenFrames OBJECT-TYPE SYNTAX Unsigned32 (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the number of flags that are inserted between frames sent to the link interface." DEFVAL { 1 } ::= { x25DteLapbFramerLinkEntry 4 } x25DteLapbFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { x25DteLapbFramer 12 } x25DteLapbFramerStateEntry OBJECT-TYPE SYNTAX X25DteLapbFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbFramerStateTable." INDEX { x25DteIndex, x25DteLapbIndex, x25DteLapbFramerIndex } ::= { x25DteLapbFramerStateTable 1 } X25DteLapbFramerStateEntry ::= SEQUENCE { x25DteLapbFramerAdminState INTEGER, x25DteLapbFramerOperationalState INTEGER, x25DteLapbFramerUsageState INTEGER } x25DteLapbFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { x25DteLapbFramerStateEntry 1 } x25DteLapbFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { x25DteLapbFramerStateEntry 2 } x25DteLapbFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { x25DteLapbFramerStateEntry 3 } x25DteLapbFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a Framer component." ::= { x25DteLapbFramer 13 } x25DteLapbFramerStatsEntry OBJECT-TYPE SYNTAX X25DteLapbFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbFramerStatsTable." INDEX { x25DteIndex, x25DteLapbIndex, x25DteLapbFramerIndex } ::= { x25DteLapbFramerStatsTable 1 } X25DteLapbFramerStatsEntry ::= SEQUENCE { x25DteLapbFramerFrmToIf Counter32, x25DteLapbFramerFrmFromIf Counter32, x25DteLapbFramerOctetFromIf Counter32, x25DteLapbFramerAborts Counter32, x25DteLapbFramerCrcErrors Counter32, x25DteLapbFramerLrcErrors Counter32, x25DteLapbFramerNonOctetErrors Counter32, x25DteLapbFramerOverruns Counter32, x25DteLapbFramerUnderruns Counter32 } x25DteLapbFramerFrmToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component." ::= { x25DteLapbFramerStatsEntry 1 } x25DteLapbFramerFrmFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames received from the link interface by Framer." ::= { x25DteLapbFramerStatsEntry 2 } x25DteLapbFramerOctetFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received from the link interface by Framer." ::= { x25DteLapbFramerStatsEntry 3 } x25DteLapbFramerAborts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of aborts received." ::= { x25DteLapbFramerStatsEntry 4 } x25DteLapbFramerCrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link." ::= { x25DteLapbFramerStatsEntry 5 } x25DteLapbFramerLrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link." ::= { x25DteLapbFramerStatsEntry 6 } x25DteLapbFramerNonOctetErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames that were non octet aligned." ::= { x25DteLapbFramerStatsEntry 7 } x25DteLapbFramerOverruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received from the link for which overruns occurred." ::= { x25DteLapbFramerStatsEntry 8 } x25DteLapbFramerUnderruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames transmitted to the link for which underruns occurred." ::= { x25DteLapbFramerStatsEntry 9 } x25DteLapbFramerUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteLapbFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the link utilizaiton operational data for a Framer component." ::= { x25DteLapbFramer 14 } x25DteLapbFramerUtilEntry OBJECT-TYPE SYNTAX X25DteLapbFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteLapbFramerUtilTable." INDEX { x25DteIndex, x25DteLapbIndex, x25DteLapbFramerIndex } ::= { x25DteLapbFramerUtilTable 1 } X25DteLapbFramerUtilEntry ::= SEQUENCE { x25DteLapbFramerNormPrioLinkUtilToIf Gauge32, x25DteLapbFramerNormPrioLinkUtilFromIf Gauge32 } x25DteLapbFramerNormPrioLinkUtilToIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute." DEFVAL { 0 } ::= { x25DteLapbFramerUtilEntry 1 } x25DteLapbFramerNormPrioLinkUtilFromIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 or 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute." DEFVAL { 0 } ::= { x25DteLapbFramerUtilEntry 3 } -- -- X25Dte/n PacketLayerEntity -- -- This component provides information that applies to multiprotocol -- interconnect over an X.25 service. x25DtePle OBJECT IDENTIFIER ::= { x25Dte 6 } x25DtePleRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePleRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of x25DtePle components." ::= { x25DtePle 1 } x25DtePleRowStatusEntry OBJECT-TYPE SYNTAX X25DtePleRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25DtePle component." INDEX { x25DteIndex, x25DtePleIndex } ::= { x25DtePleRowStatusTable 1 } X25DtePleRowStatusEntry ::= SEQUENCE { x25DtePleRowStatus RowStatus, x25DtePleComponentName DisplayString, x25DtePleStorageType StorageType, x25DtePleIndex NonReplicated } x25DtePleRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25DtePle components. These components cannot be added nor deleted." ::= { x25DtePleRowStatusEntry 1 } x25DtePleComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DtePleRowStatusEntry 2 } x25DtePleStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25DtePle tables." ::= { x25DtePleRowStatusEntry 4 } x25DtePleIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DtePle tables." ::= { x25DtePleRowStatusEntry 10 } x25DtePleProvTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePleProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25." ::= { x25DtePle 10 } x25DtePleProvEntry OBJECT-TYPE SYNTAX X25DtePleProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DtePleProvTable." INDEX { x25DteIndex, x25DtePleIndex } ::= { x25DtePleProvTable 1 } X25DtePleProvEntry ::= SEQUENCE { x25DtePleInactivityTimer Unsigned32 } x25DtePleInactivityTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65536000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the period in milliseconds this interface will keep an idle connection open before closing it." DEFVAL { 180000 } ::= { x25DtePleProvEntry 1 } x25DtePleOpTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DtePleOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Operational attributes relevant to an interface used to carry Multiprotocol Interconnect traffic over X.25." ::= { x25DtePle 11 } x25DtePleOpEntry OBJECT-TYPE SYNTAX X25DtePleOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DtePleOpTable." INDEX { x25DteIndex, x25DtePleIndex } ::= { x25DtePleOpTable 1 } X25DtePleOpEntry ::= SEQUENCE { x25DtePleEncAddrToX25LkupFlrs Unsigned32, x25DtePleLastFailedEncAddr HexString, x25DtePleX25AddrToEncLkupFlrs Unsigned32, x25DtePleLastFailedX25Addr DigitString } x25DtePleEncAddrToX25LkupFlrs OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of times a translation attempt from an Encapsulation address to an X.25 address failed to find a corresponding X.25 address. Such a failure could occur when a Protocol Port, linked to a RemoteGroup via the linkToProtocolPort attribute of the RemoteGroup, requests through the software that a X.25 call be established to a particular Encapsulation address. If the RemoteGroup does not have a Peer component linked in its linkToPeer attribute list, with the encAddress attribute equal to the Encapsulation address specified, this counter will be incremented, because the corresponding Peer component needed to establish an X.25 connection was not found." DEFVAL { 0 } ::= { x25DtePleOpEntry 1 } x25DtePleLastFailedEncAddr OBJECT-TYPE SYNTAX HexString (SIZE (2..128)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the last Encapsulation address for which no corresponding X.25 address was found and thus caused encAddressToX25LkupFlrs to be incremented." ::= { x25DtePleOpEntry 2 } x25DtePleX25AddrToEncLkupFlrs OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of times a translation attempt from an X.25 address to an Encapsulation address failed to find a corresponding Encapsulation address. Such a failure could occur when a incoming call received from the link by the X.25 DTE is directed to a specific RemoteGroup because the called address matches the localAddress attribute of the RemoteGroup component. If the RemoteGroup component does not have a Peer component linked in its linkToPeer attribute list, with the x25Address attribute equal to the calling address from the incoming call packet, there is no appropriate Peer component, so the call is cleared and this counter is incremented." DEFVAL { 0 } ::= { x25DtePleOpEntry 4 } x25DtePleLastFailedX25Addr OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This field specifies the last X.25 address that caused x25AddressToEncLkupFlrs to be incremented." ::= { x25DtePleOpEntry 5 } -- -- X25Dte/n RemoteGroup/n -- -- At least one RemoteGroup is required for each X25Dte component. -- The RemoteGroup allows the X.25 DTE interface to be shared -- amongst a number of Protocol Ports. This allows separate Virtual -- Routers to share the same physical X.25 connection into a Wide -- Area Network. x25DteRg OBJECT IDENTIFIER ::= { x25Dte 7 } x25DteRgRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of x25DteRg components." ::= { x25DteRg 1 } x25DteRgRowStatusEntry OBJECT-TYPE SYNTAX X25DteRgRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single x25DteRg component." INDEX { x25DteIndex, x25DteRgIndex } ::= { x25DteRgRowStatusTable 1 } X25DteRgRowStatusEntry ::= SEQUENCE { x25DteRgRowStatus RowStatus, x25DteRgComponentName DisplayString, x25DteRgStorageType StorageType, x25DteRgIndex Integer32 } x25DteRgRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of x25DteRg components. These components can be added and deleted." ::= { x25DteRgRowStatusEntry 1 } x25DteRgComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { x25DteRgRowStatusEntry 2 } x25DteRgStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the x25DteRg tables." ::= { x25DteRgRowStatusEntry 4 } x25DteRgIndex OBJECT-TYPE SYNTAX Integer32 (1..1023) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the x25DteRg tables." ::= { x25DteRgRowStatusEntry 10 } x25DteRgIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { x25DteRg 10 } x25DteRgIfEntryEntry OBJECT-TYPE SYNTAX X25DteRgIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteRgIfEntryTable." INDEX { x25DteIndex, x25DteRgIndex } ::= { x25DteRgIfEntryTable 1 } X25DteRgIfEntryEntry ::= SEQUENCE { x25DteRgIfAdminStatus INTEGER, x25DteRgIfIndex InterfaceIndex } x25DteRgIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { x25DteRgIfEntryEntry 1 } x25DteRgIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { x25DteRgIfEntryEntry 2 } x25DteRgProvTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the RemoteGroup component." ::= { x25DteRg 11 } x25DteRgProvEntry OBJECT-TYPE SYNTAX X25DteRgProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteRgProvTable." INDEX { x25DteIndex, x25DteRgIndex } ::= { x25DteRgProvTable 1 } X25DteRgProvEntry ::= SEQUENCE { x25DteRgLinkToProtocolPort Link, x25DteRgLocalAddress DigitString, x25DteRgMtuSize Unsigned32 } x25DteRgLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a protocol port component name. The attribute associates the application with a protocol port." ::= { x25DteRgProvEntry 1 } x25DteRgLocalAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the unique X.25 address which identifies this RemoteGroup. It should correspond to the called address in X.25 incoming call packets which are to be directed to this RemoteGroup. This allows calls received from the link to be directed to the appropriate RemoteGroup based on the called address in the X.25 call packet. The RemoteGroup components allow the X.25 interface to be shared amongst a number of Protocol Ports (and ultimately Virtual Routers) because each RemoteGroup is coupled with a specific ProtocolPort through its linkToProtocolPort attribute." ::= { x25DteRgProvEntry 2 } x25DteRgMtuSize OBJECT-TYPE SYNTAX Unsigned32 (576..9188) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Maximum Transmit Unit (MTU); that is, the size of the largest datagram (in octets) which can be sent/ received on the interface." DEFVAL { 1600 } ::= { x25DteRgProvEntry 3 } x25DteRgStateTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { x25DteRg 12 } x25DteRgStateEntry OBJECT-TYPE SYNTAX X25DteRgStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteRgStateTable." INDEX { x25DteIndex, x25DteRgIndex } ::= { x25DteRgStateTable 1 } X25DteRgStateEntry ::= SEQUENCE { x25DteRgAdminState INTEGER, x25DteRgOperationalState INTEGER, x25DteRgUsageState INTEGER } x25DteRgAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { x25DteRgStateEntry 1 } x25DteRgOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { x25DteRgStateEntry 2 } x25DteRgUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { x25DteRgStateEntry 3 } x25DteRgOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { x25DteRg 13 } x25DteRgOperStatusEntry OBJECT-TYPE SYNTAX X25DteRgOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteRgOperStatusTable." INDEX { x25DteIndex, x25DteRgIndex } ::= { x25DteRgOperStatusTable 1 } X25DteRgOperStatusEntry ::= SEQUENCE { x25DteRgSnmpOperStatus INTEGER } x25DteRgSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { x25DteRgOperStatusEntry 1 } x25DteRgLTPlcnTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgLTPlcnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute is a list of links to PermLcn components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router)." ::= { x25DteRg 210 } x25DteRgLTPlcnEntry OBJECT-TYPE SYNTAX X25DteRgLTPlcnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteRgLTPlcnTable." INDEX { x25DteIndex, x25DteRgIndex, x25DteRgLTPlcnValue } ::= { x25DteRgLTPlcnTable 1 } X25DteRgLTPlcnEntry ::= SEQUENCE { x25DteRgLTPlcnValue Link, x25DteRgLTPlcnRowStatus RowStatus } x25DteRgLTPlcnValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the x25DteRgLTPlcnTable." ::= { x25DteRgLTPlcnEntry 1 } x25DteRgLTPlcnRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the x25DteRgLTPlcnTable." ::= { x25DteRgLTPlcnEntry 2 } x25DteRgLtPeerTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgLtPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute gives a list of links to Peer components. The set of all Peer and PermLcn components which link to a given RemoteGroup determine the subset of remote hosts which are accessible to a particular Protocol Port (and ultimately a Virtual Router)." ::= { x25DteRg 211 } x25DteRgLtPeerEntry OBJECT-TYPE SYNTAX X25DteRgLtPeerEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteRgLtPeerTable." INDEX { x25DteIndex, x25DteRgIndex, x25DteRgLtPeerValue } ::= { x25DteRgLtPeerTable 1 } X25DteRgLtPeerEntry ::= SEQUENCE { x25DteRgLtPeerValue Link, x25DteRgLtPeerRowStatus RowStatus } x25DteRgLtPeerValue OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the x25DteRgLtPeerTable." ::= { x25DteRgLtPeerEntry 1 } x25DteRgLtPeerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS write-only STATUS mandatory DESCRIPTION "This variable is used to control the addition and deletion of individual values of the x25DteRgLtPeerTable." ::= { x25DteRgLtPeerEntry 2 } x25DteRgLcnTable OBJECT-TYPE SYNTAX SEQUENCE OF X25DteRgLcnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute lists the Lcn components for the X25Dte, which belong to this RemoteGroup. There is an Lcn component listed here for every lcn connection belonging to this RemoteGroup. The lcns were established using either a Peer component linked to this RemoteGroup (in response to a switched call) or using a PermLcn component linked to this RemoteGroup (a permanent connection)." ::= { x25DteRg 212 } x25DteRgLcnEntry OBJECT-TYPE SYNTAX X25DteRgLcnEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the x25DteRgLcnTable." INDEX { x25DteIndex, x25DteRgIndex, x25DteRgLcnValue } ::= { x25DteRgLcnTable 1 } X25DteRgLcnEntry ::= SEQUENCE { x25DteRgLcnValue Integer32 } x25DteRgLcnValue OBJECT-TYPE SYNTAX Integer32 (1..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the x25DteRgLcnTable." ::= { x25DteRgLcnEntry 1 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { x25DteHighestTLChannelNumber, -- x25DtePleStorageType, -- x25DteOutDataPackets, -- x25DteLapbCurrentQueueSize, -- x25DtePeerX25Address, -- x25DteLapbFramerOverruns, -- x25DteInRestarts, -- x25DtePleEncAddrToX25LkupFlrs, -- x25DteLcnCalledAddress, -- x25DteRgComponentName, -- x25DteLcnCallUserData, -- x25DteT20RestartTimer, -- x25DteLcnTrnstDlySlctnAInd, -- x25DteLcnFastSelect, -- x25DteLapbT2AckDelayTimer, -- x25DteLcnNetworkUserIdentifier, -- x25DteLapbFramerFrmToIf, -- x25DteLcnInWindowSize, -- x25DteLcnInUknownProtocols, -- x25DtePLcnInWindowSize, -- x25DtePeerCallUserData, -- x25DteOutCallAttempts, -- x25DtePeerTrnstDlySlctnAInd, -- x25DteLowestILChannelNumber, -- x25DteOutThroughputClassSize, -- x25DtePeerNetworkUserIdentifier, -- x25DteLapbLastStateChangeReason, -- x25DteLapbTransmitRejectFrames, -- x25DteRgSnmpOperStatus, -- x25DtePeerInWindowSize, -- x25DteRgIfIndex, -- x25DteLcnStorageType, -- x25DteRgLTPlcnValue, -- x25DteT22ResetTimer, -- x25DteRgLtPeerRowStatus, -- x25DteLapbFramerNormPrioLinkUtilToIf, -- x25DteInActiveChannels, -- x25DtePLcnStorageType, -- x25DteHighestOLChannelNumber, -- x25DteLcnInRmtInitiatedRsts, -- x25DteLapbFramerStorageType, -- x25DteInCallRefusals, -- x25DteRgLtPeerValue, -- x25DteLcnAdminState, -- x25DteLapbFramerCrcErrors, -- x25DteCallUserData, -- x25DteLcnRpoa, -- x25DteLapbActionRecvDM, -- x25DteLapbStationType, -- x25DtePLcnEncAddress, -- x25DteLapbFramerAdminState, -- x25DtePleLastFailedEncAddr, -- x25DteRgRowStatus, -- x25DteLcnInThroughputClassSize, -- x25DteTrnstDlySlctnAInd, -- x25DteMaxActiveChannels, -- x25DteLapbReceiveRejectFrames, -- x25DtePleX25AddrToEncLkupFlrs, -- x25DteLcnInInterruptPackets, -- x25DteLapbRowStatus, -- x25DteLcnCallingNetworkFax, -- x25DteInWindowSize, -- x25DteRgUsageState, -- x25DteLapbFramerNonOctetErrors, -- x25DtePLcnInPacketSize, -- x25DteLcnChargingInformation, -- x25DteLapbUsageState, -- x25DteLapbComponentName, -- x25DteLcnCugoaIndex, -- x25DtePeerInThroughputClassSize, -- x25DteRgOperationalState, -- x25DtePeerInPacketSize, -- x25DtePeerCallingNetworkFax, -- x25DteLapbOperationalState, -- x25DteLcnInDataPackets, -- x25DtePleComponentName, -- x25DteStorageType, -- x25DteLapbTxQDegradeThreshold, -- x25DteLcnCallDirection, -- x25DteLcnStatus, -- x25DteLapbRemoteBusy, -- x25DtePeerCugoaIndex, -- x25DtePeerEncAddress, -- x25DteInRmtInitiatedRsts, -- x25DtePeerChargingInformation, -- x25DtePeerAcceptReverseCharging, -- x25DteAdminState, -- x25DteLapbStateChanges, -- x25DteHighestILChannelNumber, -- x25DteInterfaceState, -- x25DteIfAdminStatus, -- x25DteNumberOfPLcn, -- x25DteLapbN2TransmitLimit, -- x25DteCustomerIdentifier, -- x25DteLcnInPrvdrInitiatedRsts, -- x25DteLapbKWindowSize, -- x25DteInThroughputClassSize, -- x25DteLapbFramerFlagsBetweenFrames, -- x25DtePeerStorageType, -- x25DteInPacketSize, -- x25DteInInterruptPackets, -- x25DtePleLastFailedX25Addr, -- x25DteCallingNetworkFax, -- x25DteLcnOutWindowSize, -- x25DteRgLcnValue, -- x25DtePeerCalledNetworkFax, -- x25DteChargingInformation, -- x25DtePLcnOutWindowSize, -- x25DteRgLTPlcnRowStatus, -- x25DteCugoaIndex, -- x25DteLcnComponentName, -- x25DteLcnInDataOctets, -- x25DteAcceptReverseCharging, -- x25DteInPrvdrInitiatedClrs, -- x25DteLcnT22ResetTimeouts, -- x25DtePeerOutWindowSize, -- x25DtePLcnComponentName, -- x25DteInPktsAcusdOfPrtclErr, -- x25DteLapbFramerComponentName, -- x25DteLapbT1AckTimeout, -- x25DteTwowayActiveChannels, -- x25DtePleRowStatus, -- x25DteLapbFramerUnderruns, -- x25DteOutActiveChannels, -- x25DteRgMtuSize, -- x25DtePeerRpoa, -- x25DteT21CallTimeouts, -- x25DteInDataPackets, -- x25DtePeerLcnValue, -- x25DtePLcnLinkToRemoteGroup, -- x25DteCalledNetworkFax, -- x25DteInPrvdrInitiatedRsts, -- x25DteLcnOutThroughputClassSize, -- x25DteLcnCugIndex, -- x25DteLapbFrmrTransmit, -- x25DteLcnOutInterruptPackets, -- x25DteOutWindowSize, -- x25DteRgStorageType, -- x25DteLapbFramerFrmFromIf, -- x25DteLapbTxQResetThreshold, -- x25DtePLcnOutPacketSize, -- x25DtePLcnRowStatus, -- x25DteLapbStorageType, -- x25DteLowestTLChannelNumber, -- x25DteRgLocalAddress, -- x25DtePeerOutThroughputClassSize, -- x25DteLapbT1AckTimer, -- x25DteLcnRowStatus, -- x25DteLapbT4IdleProbeTimer, -- x25DtePeerCugIndex, -- x25DteT22ResetTimeouts, -- x25DteRpoa, -- x25DtePeerOutPacketSize, -- x25DteRgIfAdminStatus, -- x25DteT23ClearTimeouts, -- x25DteLapbN1FrameSize, -- x25DteLapbAdminState, -- x25DteLcnUsageState, -- x25DteLapbFramerRowStatus, -- x25DtePacketSequencing, -- x25DteLapbActionInitiate, -- x25DteLapbFrmrReceive, -- x25DtePeerLinkToRemoteGroup, -- x25DtePeerRowStatus, -- x25DteLapbFramerUsageState, -- x25DtePLcnProtocolEncType, -- x25DteLcnOperationalState, -- x25DteLapbFramerNormPrioLinkUtilFromIf, -- x25DtePleInactivityTimer, -- x25DtePLcnEncAddressType, -- x25DteT20RestartTimeouts, -- x25DteLcnOutDataPackets, -- x25DteComponentName, -- x25DteLapbFramerInterfaceName, -- x25DteSnmpOperStatus, -- x25DtePeerComponentName, -- x25DteIfIndex, -- x25DteInterfaceMode, -- x25DteLapbFramerOperationalState, -- x25DtePeerEncAddressType, -- x25DteT21CallTimer, -- x25DteProposeReverseCharging, -- x25DteLapbCurrentState, -- x25DteLcnCallingAddress, -- x25DteCugIndex, -- x25DteRgLinkToProtocolPort, -- x25DteInCalls, -- x25DteOutPacketSize, -- x25DteOutInterruptPackets, -- x25DteLapbFramerLrcErrors, -- x25DteLcnProposeReverseCharging, -- x25DtePeerPEncRowStatus, -- x25DteLcnOriginalCalledAddress, -- x25DteLapbFramerAborts, -- x25DteLcnOutPacketSize, -- x25DteLowestOLChannelNumber, -- x25DtePeerPEncValue, -- x25DteRowStatus, -- x25DteLcnOutDataOctets, -- x25DteLcnCalledNetworkFax, -- x25DteRgAdminState, -- x25DtePeerProposeReverseCharging, -- x25DteUsageState, -- x25DteOutCallFailures, -- x25DteLapbFramerOctetFromIf, -- x25DteLapbFrameSequencing, -- x25DteT23ClearTimer, -- x25DteLcnInPacketSize, -- x25DteOperationalState } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." x25DteGroup OBJECT IDENTIFIER ::= { x25DteMIB 1 } x25DteGroupBE OBJECT IDENTIFIER ::= { x25DteGroup 5 } x25DteGroupBE00 OBJECT IDENTIFIER ::= { x25DteGroupBE 1 } x25DteGroupBE00A OBJECT IDENTIFIER ::= { x25DteGroupBE00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 X25Dte." -- STATUS mandatory -- DESCRIPTION "X25Dte MIB: MIB Version BE00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-X25DteMIB -- INCLUDES { x25DteGroupBE00A } x25DteCapabilities OBJECT IDENTIFIER ::= { x25DteMIB 3 } x25DteCapabilitiesBE OBJECT IDENTIFIER ::= { x25DteCapabilities 5 } x25DteCapabilitiesBE00 OBJECT IDENTIFIER ::= { x25DteCapabilitiesBE 1 } x25DteCapabilitiesBE00A OBJECT IDENTIFIER ::= { x25DteCapabilitiesBE00 2 } END