Nortel-Magellan-Passport-VnetEuroIsdnMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, Gauge32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB NonReplicated, Link FROM Nortel-Magellan-Passport-TextualConventionsMIB sigChanIndex, sigChan FROM Nortel-Magellan-Passport-VoiceNetworkingMIB; -- LAST-UPDATED "9904150000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- VnetEuroIsdn Enterprise MIB." vnetEuroIsdnMIB OBJECT IDENTIFIER ::= { passportMIBs 138 } -- SigChan/n EuroIsdn -- The EuroIsdn component defines the characteristics of the -- signalling channel's connection to the external equipment on the -- Euro ISDN UNI (ETSI-T Interface). sigChanEIsdn OBJECT IDENTIFIER ::= { sigChan 14 } sigChanEIsdnRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of sigChanEIsdn components." ::= { sigChanEIsdn 1 } sigChanEIsdnRowStatusEntry OBJECT-TYPE SYNTAX SigChanEIsdnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single sigChanEIsdn component." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnRowStatusTable 1 } SigChanEIsdnRowStatusEntry ::= SEQUENCE { sigChanEIsdnRowStatus RowStatus, sigChanEIsdnComponentName DisplayString, sigChanEIsdnStorageType StorageType, sigChanEIsdnIndex NonReplicated } sigChanEIsdnRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of sigChanEIsdn components. These components can be added and deleted." ::= { sigChanEIsdnRowStatusEntry 1 } sigChanEIsdnComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { sigChanEIsdnRowStatusEntry 2 } sigChanEIsdnStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the sigChanEIsdn tables." ::= { sigChanEIsdnRowStatusEntry 4 } sigChanEIsdnIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the sigChanEIsdn tables." ::= { sigChanEIsdnRowStatusEntry 10 } sigChanEIsdnL2Table OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnL2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group specifies the provisionable layer 2 attributes of the Euro ISDN (ETSI-T) protocol." ::= { sigChanEIsdn 11 } sigChanEIsdnL2Entry OBJECT-TYPE SYNTAX SigChanEIsdnL2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnL2Table." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnL2Table 1 } SigChanEIsdnL2Entry ::= SEQUENCE { sigChanEIsdnT23 Unsigned32, sigChanEIsdnT200 Unsigned32, sigChanEIsdnN200 Unsigned32, sigChanEIsdnT203 Unsigned32, sigChanEIsdnCircuitSwitchedK Unsigned32 } sigChanEIsdnT23 OBJECT-TYPE SYNTAX Unsigned32 (1..15) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies duration of the layer 2 enable request timer." DEFVAL { 10 } ::= { sigChanEIsdnL2Entry 1 } sigChanEIsdnT200 OBJECT-TYPE SYNTAX Unsigned32 (1..20) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum elapsed time between a layer 2 frame and its acknowledgment." DEFVAL { 1 } ::= { sigChanEIsdnL2Entry 2 } sigChanEIsdnN200 OBJECT-TYPE SYNTAX Unsigned32 (1..8) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of re-transmissions of a layer 2 frame." DEFVAL { 3 } ::= { sigChanEIsdnL2Entry 3 } sigChanEIsdnT203 OBJECT-TYPE SYNTAX Unsigned32 (2..40) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum time during which layer 2 frames may be absent. Expiry triggers a check on whether the far end is alive." DEFVAL { 10 } ::= { sigChanEIsdnL2Entry 4 } sigChanEIsdnCircuitSwitchedK OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of sequentially numbered I frames (that is, window size (k)) that may be unacknowledged at any given time for a SAP supporting primary rate (64kbit/sec) signalling." DEFVAL { 7 } ::= { sigChanEIsdnL2Entry 6 } sigChanEIsdnL3Table OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnL3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group represents the provisionable Layer 3 timer attributes of a the Euro ISDN (ETSI-T) protocol." ::= { sigChanEIsdn 12 } sigChanEIsdnL3Entry OBJECT-TYPE SYNTAX SigChanEIsdnL3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnL3Table." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnL3Table 1 } SigChanEIsdnL3Entry ::= SEQUENCE { sigChanEIsdnT310 Unsigned32 } sigChanEIsdnT310 OBJECT-TYPE SYNTAX Unsigned32 (10..120) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies duration of the call proceeding state timer." DEFVAL { 30 } ::= { sigChanEIsdnL3Entry 4 } sigChanEIsdnProvTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the general options of the D-channel signalling link." ::= { sigChanEIsdn 13 } sigChanEIsdnProvEntry OBJECT-TYPE SYNTAX SigChanEIsdnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnProvTable." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnProvTable 1 } SigChanEIsdnProvEntry ::= SEQUENCE { sigChanEIsdnSide INTEGER, sigChanEIsdnMaxNonCallConcurrent Unsigned32, sigChanEIsdnOverlapSending INTEGER, sigChanEIsdnOverlapReceiving INTEGER } sigChanEIsdnSide OBJECT-TYPE SYNTAX INTEGER { network(1), user(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether the interface is the network or user side of the connection. The parameter applies to both the layer 2 and layer 3 of the interface. In addition, if this attribute is set to network, then the interface is master during channel negotiation. If this attribute is set to user, then the interface is slave during channel negotiation." DEFVAL { network } ::= { sigChanEIsdnProvEntry 1 } sigChanEIsdnMaxNonCallConcurrent OBJECT-TYPE SYNTAX Unsigned32 (0..30) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of simultaneous active non call-associated sessions that are allowed. Reduction of the value does not impact NCAS sessions already in progress." DEFVAL { 30 } ::= { sigChanEIsdnProvEntry 2 } sigChanEIsdnOverlapSending OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether overlap sending to the PBX is enabled." DEFVAL { enabled } ::= { sigChanEIsdnProvEntry 3 } sigChanEIsdnOverlapReceiving OBJECT-TYPE SYNTAX INTEGER { enabled(0), disabled(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether overlap receiving from the PBX is enabled." DEFVAL { enabled } ::= { sigChanEIsdnProvEntry 4 } sigChanEIsdnStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { sigChanEIsdn 14 } sigChanEIsdnStateEntry OBJECT-TYPE SYNTAX SigChanEIsdnStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnStateTable." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnStateTable 1 } SigChanEIsdnStateEntry ::= SEQUENCE { sigChanEIsdnAdminState INTEGER, sigChanEIsdnOperationalState INTEGER, sigChanEIsdnUsageState INTEGER } sigChanEIsdnAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { sigChanEIsdnStateEntry 1 } sigChanEIsdnOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { sigChanEIsdnStateEntry 2 } sigChanEIsdnUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { sigChanEIsdnStateEntry 3 } sigChanEIsdnStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the statistical attributes for the SigChan/x EuroIsdn component." ::= { sigChanEIsdn 15 } sigChanEIsdnStatsEntry OBJECT-TYPE SYNTAX SigChanEIsdnStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnStatsTable." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnStatsTable 1 } SigChanEIsdnStatsEntry ::= SEQUENCE { sigChanEIsdnTotalCallsToIf Counter32, sigChanEIsdnTotalCallsFromIf Counter32, sigChanEIsdnNonCallAssocSessionsToIf Counter32, sigChanEIsdnNonCallAssocSessionsFromIf Counter32 } sigChanEIsdnTotalCallsToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls that have been made to the interface. The value wraps to zero when it exceeds its maximum." ::= { sigChanEIsdnStatsEntry 2 } sigChanEIsdnTotalCallsFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of calls that have been made from the interface. The value wraps to zero when it exceeds its maximum." ::= { sigChanEIsdnStatsEntry 3 } sigChanEIsdnNonCallAssocSessionsToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of non call-associated sessions that have been made to the interface. The value wraps to zero when it exceeds its maximum." ::= { sigChanEIsdnStatsEntry 4 } sigChanEIsdnNonCallAssocSessionsFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of non call-associated sessions that have been made from the interface. The value wraps to zero when it exceeds its maximum." ::= { sigChanEIsdnStatsEntry 5 } sigChanEIsdnOperTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group provides the operational attributes for the SigChan/x EuroIsdn component." ::= { sigChanEIsdn 16 } sigChanEIsdnOperEntry OBJECT-TYPE SYNTAX SigChanEIsdnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnOperTable." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnOperTable 1 } SigChanEIsdnOperEntry ::= SEQUENCE { sigChanEIsdnActiveChannels Gauge32, sigChanEIsdnActiveVoiceChannels Gauge32, sigChanEIsdnActiveDataChannels Gauge32, sigChanEIsdnPeakActiveChannels Gauge32, sigChanEIsdnPeakActiveVoiceChannels Gauge32, sigChanEIsdnPeakActiveDataChannels Gauge32, sigChanEIsdnDChanStatus INTEGER } sigChanEIsdnActiveChannels OBJECT-TYPE SYNTAX Gauge32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of currently active channels. This includes channels used by both, data and voice calls." DEFVAL { 0 } ::= { sigChanEIsdnOperEntry 1 } sigChanEIsdnActiveVoiceChannels OBJECT-TYPE SYNTAX Gauge32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of channels that are currently used by voice calls. This includes modem calls." DEFVAL { 0 } ::= { sigChanEIsdnOperEntry 2 } sigChanEIsdnActiveDataChannels OBJECT-TYPE SYNTAX Gauge32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of channels that are currently used by data calls. This does not include modem data." DEFVAL { 0 } ::= { sigChanEIsdnOperEntry 3 } sigChanEIsdnPeakActiveChannels OBJECT-TYPE SYNTAX Gauge32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum value of the activeChannels attribute during the last polling period." DEFVAL { 0 } ::= { sigChanEIsdnOperEntry 4 } sigChanEIsdnPeakActiveVoiceChannels OBJECT-TYPE SYNTAX Gauge32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum value of the activeVoiceChannels attribute during the last polling period." DEFVAL { 0 } ::= { sigChanEIsdnOperEntry 5 } sigChanEIsdnPeakActiveDataChannels OBJECT-TYPE SYNTAX Gauge32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum value of the activeDataChannels attribute during the last polling period." DEFVAL { 0 } ::= { sigChanEIsdnOperEntry 6 } sigChanEIsdnDChanStatus OBJECT-TYPE SYNTAX INTEGER { outOfService(0), establishing(1), established(2), enabling(3), inService(4), restarting(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is enabled. If the signalling channel stays in the established state, then it is waiting for a restart from the PBX. enabling means that the resources for processing calls are being initialized. If the signalling channel stays in the enabling state then it is waiting for a restart acknowledgment from the PBX. inService means that the resources for processing calls are available. restarting means that the resources for call processing are being initialized." ::= { sigChanEIsdnOperEntry 7 } sigChanEIsdnToolsTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnToolsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This contains a series of operational attributes which turn on and off several kinds of tracing." ::= { sigChanEIsdn 17 } sigChanEIsdnToolsEntry OBJECT-TYPE SYNTAX SigChanEIsdnToolsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnToolsTable." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnToolsTable 1 } SigChanEIsdnToolsEntry ::= SEQUENCE { sigChanEIsdnTracing OCTET STRING } sigChanEIsdnTracing OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines which types of tracing are active on the signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueueSize attribute of the Lp/x Eng Ds/debug component must be greater than 0 and the operator's NMIS session must have the debug stream included in its data stream list (for example: set Nmis Telnet Session/1 dataStreams deb). Several types of tracing can be enabled simultaneously. Note that tracing consumes additional CPU resources and slows down call processing on a heavily loaded card. If there is message block exhaustion tracing is suspended for a period of time and then automatically re-enabled. An alarm is generated on tracing suspension and resumption. This mechanism protects the function processor against excessive numbers of tracing messages. Types of tracing include: protocolErrors - get details of any protocol errors which are occurring. Protocol errors are also reported in summary form as alarms. q931Summary - summary of the Q.931 messages on the signalling link. q931Hex - Q.931 messages displayed in hex format. Useful to determine protocol compliance in case of errors reported on local or remote ends. q931Symbolic - Q.931 messages parsed to give maximum detail. Useful for understanding content of messages flowing on the link. portHex - Q.921 messages in hex format being sent and received on the link. Description of bits: protocolErrors(0) q931Summary(1) q931Hex(2) q931Symbolic(3) portHex(4)" ::= { sigChanEIsdnToolsEntry 1 } sigChanEIsdnOptTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnOptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group specifies the provisionable attributes specific to the Euro ISDN (ETSI-T) protocol." ::= { sigChanEIsdn 18 } sigChanEIsdnOptEntry OBJECT-TYPE SYNTAX SigChanEIsdnOptEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnOptTable." INDEX { sigChanIndex, sigChanEIsdnIndex } ::= { sigChanEIsdnOptTable 1 } SigChanEIsdnOptEntry ::= SEQUENCE { sigChanEIsdnVariant INTEGER, sigChanEIsdnConnectServiceTimer Unsigned32, sigChanEIsdnResponseServiceTimer Unsigned32, sigChanEIsdnLifetimeServiceTimer Unsigned32 } sigChanEIsdnVariant OBJECT-TYPE SYNTAX INTEGER { etsiGeneric(0), austria(1), germany(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the specific variant of the Euro ISDN (ETSI- T) protocol. Supported variants are: etsiGeneric - provides generic ETSI-T protocol. Only proxy of the NETWORK side of the protocol is implemented, austria - provides ETSI-T protocol variant as per the Austrian national specification. Only the USER side of the protocol is implemented, germany - provides ETSI-T protocol variant as per the German national specification. Only the USER side of the protocol is implemented." DEFVAL { etsiGeneric } ::= { sigChanEIsdnOptEntry 1 } sigChanEIsdnConnectServiceTimer OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies duration of the 'await connection' supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer is started at the ingress Passport when a REGISTER message is received from the source PBX and stopped when a virtual circuit with the egress Passport is established. If the timer expires, the non call-associated session is cleared. The 'await connection' timer (attribute connectServiceTimer) together with 'await response' timer (attribute responseServiceTimer) provide equivalent of the T-ACTIVATE timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running." DEFVAL { 8 } ::= { sigChanEIsdnOptEntry 2 } sigChanEIsdnResponseServiceTimer OBJECT-TYPE SYNTAX Unsigned32 (1..10) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies duration of the 'await response' supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer is started at the ingress Passport when creation of a virtual circuit with the egress Passport is confirmed and stopped when the first message from the destination PBX is received. If the timer expires, the non call-associated session is cleared. The 'await connection' timer (attribute connectServiceTimer) together with 'await response' timer (attribute responseServiceTimer) provide equivalent of the T-ACTIVATE timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running." DEFVAL { 8 } ::= { sigChanEIsdnOptEntry 3 } sigChanEIsdnLifetimeServiceTimer OBJECT-TYPE SYNTAX Unsigned32 (1..200) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies duration of the service lifetime supervisory timer which applies to non call-associated sessions providing bearer-independent connection-oriented transport for supplementary services. The timer limits the duration of a virtual call. It is started at the ingress Passport at the moment the first response message from the destination PBX has been received and stopped when the non call-associated session is released. If the timer expires, the non call-associated session is cleared. This timer is equivalent to the T-CCBS6 timer described in the relevant supplementary service specifications. A change of the timer value does not apply to timers already running." DEFVAL { 60 } ::= { sigChanEIsdnOptEntry 4 } -- SigChan/n EuroIsdn Framer -- -- The Framer component controls link layer framing for application -- components sending and receiving data on a link interface. It is also -- through Framer, that an application component is associated with a -- specific hardware link interface. -- -- The Framer component provides provisionable attributes related to -- data path aspects of the hardware interface (such as CRC and frame -- length). The Framer component also provides a provisionable -- attribute which binds the application component to a specific -- hardware component. -- -- The Framer component contains operational attributes for link -- interface data path statistics (such as frame counts and aborts). sigChanEIsdnFramer OBJECT IDENTIFIER ::= { sigChanEIsdn 2 } sigChanEIsdnFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of sigChanEIsdnFramer components." ::= { sigChanEIsdnFramer 1 } sigChanEIsdnFramerRowStatusEntry OBJECT-TYPE SYNTAX SigChanEIsdnFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single sigChanEIsdnFramer component." INDEX { sigChanIndex, sigChanEIsdnIndex, sigChanEIsdnFramerIndex } ::= { sigChanEIsdnFramerRowStatusTable 1 } SigChanEIsdnFramerRowStatusEntry ::= SEQUENCE { sigChanEIsdnFramerRowStatus RowStatus, sigChanEIsdnFramerComponentName DisplayString, sigChanEIsdnFramerStorageType StorageType, sigChanEIsdnFramerIndex NonReplicated } sigChanEIsdnFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of sigChanEIsdnFramer components. These components cannot be added nor deleted." ::= { sigChanEIsdnFramerRowStatusEntry 1 } sigChanEIsdnFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { sigChanEIsdnFramerRowStatusEntry 2 } sigChanEIsdnFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the sigChanEIsdnFramer tables." ::= { sigChanEIsdnFramerRowStatusEntry 4 } sigChanEIsdnFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the sigChanEIsdnFramer tables." ::= { sigChanEIsdnFramerRowStatusEntry 10 } sigChanEIsdnFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups." ::= { sigChanEIsdnFramer 10 } sigChanEIsdnFramerProvEntry OBJECT-TYPE SYNTAX SigChanEIsdnFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnFramerProvTable." INDEX { sigChanIndex, sigChanEIsdnIndex, sigChanEIsdnFramerIndex } ::= { sigChanEIsdnFramerProvTable 1 } SigChanEIsdnFramerProvEntry ::= SEQUENCE { sigChanEIsdnFramerInterfaceName Link } sigChanEIsdnFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run." ::= { sigChanEIsdnFramerProvEntry 1 } sigChanEIsdnFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { sigChanEIsdnFramer 12 } sigChanEIsdnFramerStateEntry OBJECT-TYPE SYNTAX SigChanEIsdnFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnFramerStateTable." INDEX { sigChanIndex, sigChanEIsdnIndex, sigChanEIsdnFramerIndex } ::= { sigChanEIsdnFramerStateTable 1 } SigChanEIsdnFramerStateEntry ::= SEQUENCE { sigChanEIsdnFramerAdminState INTEGER, sigChanEIsdnFramerOperationalState INTEGER, sigChanEIsdnFramerUsageState INTEGER } sigChanEIsdnFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { sigChanEIsdnFramerStateEntry 1 } sigChanEIsdnFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { sigChanEIsdnFramerStateEntry 2 } sigChanEIsdnFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { sigChanEIsdnFramerStateEntry 3 } sigChanEIsdnFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF SigChanEIsdnFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a Framer component." ::= { sigChanEIsdnFramer 13 } sigChanEIsdnFramerStatsEntry OBJECT-TYPE SYNTAX SigChanEIsdnFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the sigChanEIsdnFramerStatsTable." INDEX { sigChanIndex, sigChanEIsdnIndex, sigChanEIsdnFramerIndex } ::= { sigChanEIsdnFramerStatsTable 1 } SigChanEIsdnFramerStatsEntry ::= SEQUENCE { sigChanEIsdnFramerFrmToIf Counter32, sigChanEIsdnFramerFrmFromIf Counter32, sigChanEIsdnFramerOctetFromIf Counter32, sigChanEIsdnFramerAborts Counter32, sigChanEIsdnFramerCrcErrors Counter32, sigChanEIsdnFramerLrcErrors Counter32, sigChanEIsdnFramerNonOctetErrors Counter32, sigChanEIsdnFramerOverruns Counter32, sigChanEIsdnFramerUnderruns Counter32, sigChanEIsdnFramerLargeFrmErrors Counter32 } sigChanEIsdnFramerFrmToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames transmitted to the link interface by the Framer. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 1 } sigChanEIsdnFramerFrmFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the link interface by the Framer. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 2 } sigChanEIsdnFramerOctetFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of bytes received from the link interface by the Framer. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 3 } sigChanEIsdnFramerAborts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of aborts received. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 4 } sigChanEIsdnFramerCrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with CRC errors. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 5 } sigChanEIsdnFramerLrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with LRC errors. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 6 } sigChanEIsdnFramerNonOctetErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 7 } sigChanEIsdnFramerOverruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 8 } sigChanEIsdnFramerUnderruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 9 } sigChanEIsdnFramerLargeFrmErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received which were too large (longer than 500 bytes). This count wraps to zero after exceeding its maximum value." ::= { sigChanEIsdnFramerStatsEntry 10 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { sigChanEIsdnFramerAdminState, -- sigChanEIsdnOverlapReceiving, -- sigChanEIsdnLifetimeServiceTimer, -- sigChanEIsdnOperationalState, -- sigChanEIsdnFramerFrmFromIf, -- sigChanEIsdnT203, -- sigChanEIsdnFramerFrmToIf, -- sigChanEIsdnFramerOctetFromIf, -- sigChanEIsdnFramerStorageType, -- sigChanEIsdnDChanStatus, -- sigChanEIsdnConnectServiceTimer, -- sigChanEIsdnFramerUnderruns, -- sigChanEIsdnFramerLrcErrors, -- sigChanEIsdnFramerLargeFrmErrors, -- sigChanEIsdnAdminState, -- sigChanEIsdnTracing, -- sigChanEIsdnFramerRowStatus, -- sigChanEIsdnActiveVoiceChannels, -- sigChanEIsdnActiveChannels, -- sigChanEIsdnTotalCallsFromIf, -- sigChanEIsdnRowStatus, -- sigChanEIsdnResponseServiceTimer, -- sigChanEIsdnT23, -- sigChanEIsdnT310, -- sigChanEIsdnMaxNonCallConcurrent, -- sigChanEIsdnVariant, -- sigChanEIsdnNonCallAssocSessionsFromIf, -- sigChanEIsdnPeakActiveVoiceChannels, -- sigChanEIsdnFramerNonOctetErrors, -- sigChanEIsdnNonCallAssocSessionsToIf, -- sigChanEIsdnFramerOverruns, -- sigChanEIsdnFramerUsageState, -- sigChanEIsdnFramerAborts, -- sigChanEIsdnActiveDataChannels, -- sigChanEIsdnFramerComponentName, -- sigChanEIsdnUsageState, -- sigChanEIsdnN200, -- sigChanEIsdnSide, -- sigChanEIsdnPeakActiveChannels, -- sigChanEIsdnTotalCallsToIf, -- sigChanEIsdnComponentName, -- sigChanEIsdnCircuitSwitchedK, -- sigChanEIsdnPeakActiveDataChannels, -- sigChanEIsdnFramerInterfaceName, -- sigChanEIsdnFramerCrcErrors, -- sigChanEIsdnStorageType, -- sigChanEIsdnFramerOperationalState, -- sigChanEIsdnOverlapSending, -- sigChanEIsdnT200 } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." vnetEuroIsdnGroup OBJECT IDENTIFIER ::= { vnetEuroIsdnMIB 1 } vnetEuroIsdnGroupBE OBJECT IDENTIFIER ::= { vnetEuroIsdnGroup 5 } vnetEuroIsdnGroupBE01 OBJECT IDENTIFIER ::= { vnetEuroIsdnGroupBE 2 } vnetEuroIsdnGroupBE01A OBJECT IDENTIFIER ::= { vnetEuroIsdnGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 VnetEuroIsdn." -- STATUS mandatory -- DESCRIPTION "VnetEuroIsdn MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-VnetEuroIsdnMIB -- INCLUDES { vnetEuroIsdnGroupBE01A } vnetEuroIsdnCapabilities OBJECT IDENTIFIER ::= { vnetEuroIsdnMIB 3 } vnetEuroIsdnCapabilitiesBE OBJECT IDENTIFIER ::= { vnetEuroIsdnCapabilities 5 } vnetEuroIsdnCapabilitiesBE01 OBJECT IDENTIFIER ::= { vnetEuroIsdnCapabilitiesBE 2 } vnetEuroIsdnCapabilitiesBE01A OBJECT IDENTIFIER ::= { vnetEuroIsdnCapabilitiesBE01 2 } END