Nortel-Magellan-Passport-TimeMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 IpAddress FROM RFC1155-SMI components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, RowPointer, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB NonReplicated, EnterpriseDateAndTime FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9902010000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- Time Enterprise MIB." timeMIB OBJECT IDENTIFIER ::= { passportMIBs 13 } -- Time -- The Time component provides access to time and date information -- on this module. It has operational attributes and optional -- provisionable Server subcomponents. time OBJECT IDENTIFIER ::= { components 19 } timeRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TimeRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of time components." ::= { time 1 } timeRowStatusEntry OBJECT-TYPE SYNTAX TimeRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single time component." INDEX { timeIndex } ::= { timeRowStatusTable 1 } TimeRowStatusEntry ::= SEQUENCE { timeRowStatus RowStatus, timeComponentName DisplayString, timeStorageType StorageType, timeIndex NonReplicated } timeRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of time components. These components cannot be added nor deleted." ::= { timeRowStatusEntry 1 } timeComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { timeRowStatusEntry 2 } timeStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the time tables." ::= { timeRowStatusEntry 4 } timeIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the time tables." ::= { timeRowStatusEntry 10 } timeOperTable OBJECT-TYPE SYNTAX SEQUENCE OF TimeOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Time component." ::= { time 10 } timeOperEntry OBJECT-TYPE SYNTAX TimeOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the timeOperTable." INDEX { timeIndex } ::= { timeOperTable 1 } TimeOperEntry ::= SEQUENCE { timeNetworkTime EnterpriseDateAndTime, timeSyncStatus INTEGER, timeSyncSource IpAddress, timeTimeOffset Unsigned32, timeModuleTime EnterpriseDateAndTime, timeOffset INTEGER, timeMainServer IpAddress, timeXntpVersion Unsigned32 } timeNetworkTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-write STATUS obsolete DESCRIPTION "The networkTime attribute represents the current date and time. The operator resets the current date and time by setting this attribute. If syncStatus is synchronized or synchronizing, the set verb is disabled." ::= { timeOperEntry 1 } timeSyncStatus OBJECT-TYPE SYNTAX INTEGER { synchronized(0), unsynchronized(1), synchronizing(4), unspecified(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the XNTP (Network Time Protocol) synchronization status of this module. If the value is synchronized or synchronizing, the syncSource attribute indicates the IP address of the main network time server. The values have the following meanings: synchronized -- The module is synchronized with the network time server. unsynchronized -- There is no network time server selected as XNTP server for the module to synchronize its time with. synchronizing -- The module is trying to synchronize with the network time server. unknown -- The synchronization status of the module is unknown." ::= { timeOperEntry 2 } timeSyncSource OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS obsolete DESCRIPTION "The syncSource is the IP address of the time server host to which the module's syncStatus is synchronized. If the module's syncStatus is unsynchronized, the address is 0.0.0.0." ::= { timeOperEntry 3 } timeTimeOffset OBJECT-TYPE SYNTAX Unsigned32 (0..1440) ACCESS read-write STATUS obsolete DESCRIPTION "The timeOffset attribute is the number of minutes, to add to the reference time, which is equal to the Universal Coordinated Time (UTC), to obtain the moduleTime." DEFVAL { 0 } ::= { timeOperEntry 4 } timeModuleTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the current date and time on this module. The moduleTime is obtained by adding an offset to the reference time, which is the Universal Time Coordinated (UTC). When the moduleTime is set, it keeps the value even if the card boots. It is the time used for time stamps, such as in alarms and accounting data. The operator resets the current date and time by setting this attribute when syncStatus is unsynchronized. Setting this attribute is not allowed if syncStatus is synchronized or synchronizing." ::= { timeOperEntry 5 } timeOffset OBJECT-TYPE SYNTAX INTEGER (-720..1440) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of minutes to be added to the reference time, which is Universal Coordinated Time (UTC), to obtain the moduleTime. It keeps its value even if the card boots. However, if the node is powered-off for more than 24 hours, it resets to the default value, which is 0. The specified value should be in the range -720 (-12 hours) to 720 (+12 hours). Values greater than 720 are accepted for backward compatibility; for example, 780 (13 hours) corresponds to an offset of -11 hours. If a value greater than 720 is entered, it will be displayed as a negative offset." DEFVAL { 0 } ::= { timeOperEntry 6 } timeMainServer OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the IP address of the main network time server that this module synchronizes with. If syncStatus is unsynchronized, then mainServer is 0.0.0.0." ::= { timeOperEntry 7 } timeXntpVersion OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current protocol version of XNTP running on this module." ::= { timeOperEntry 8 } timeSyncSourcesTable OBJECT-TYPE SYNTAX SEQUENCE OF TimeSyncSourcesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute indicates the IP addresses of the network time servers that this module synchronizes with. XNTP uses the clock values of the network time servers to set its moduleTime." ::= { time 391 } timeSyncSourcesEntry OBJECT-TYPE SYNTAX TimeSyncSourcesEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the timeSyncSourcesTable." INDEX { timeIndex, timeSyncSourcesValue } ::= { timeSyncSourcesTable 1 } TimeSyncSourcesEntry ::= SEQUENCE { timeSyncSourcesValue IpAddress } timeSyncSourcesValue OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the timeSyncSourcesTable." ::= { timeSyncSourcesEntry 1 } -- Time Server/n -- The Server component represents a single network time server that -- this module can use for network time synchronization. timeServer OBJECT IDENTIFIER ::= { time 3 } timeServerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TimeServerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of timeServer components." ::= { timeServer 1 } timeServerRowStatusEntry OBJECT-TYPE SYNTAX TimeServerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single timeServer component." INDEX { timeIndex, timeServerIndex } ::= { timeServerRowStatusTable 1 } TimeServerRowStatusEntry ::= SEQUENCE { timeServerRowStatus RowStatus, timeServerComponentName DisplayString, timeServerStorageType StorageType, timeServerIndex Integer32 } timeServerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of timeServer components. These components can be added and deleted." ::= { timeServerRowStatusEntry 1 } timeServerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { timeServerRowStatusEntry 2 } timeServerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the timeServer tables." ::= { timeServerRowStatusEntry 4 } timeServerIndex OBJECT-TYPE SYNTAX Integer32 (1..10) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the timeServer tables." ::= { timeServerRowStatusEntry 10 } timeServerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF TimeServerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Server component." ::= { timeServer 11 } timeServerProvEntry OBJECT-TYPE SYNTAX TimeServerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the timeServerProvTable." INDEX { timeIndex, timeServerIndex } ::= { timeServerProvTable 1 } TimeServerProvEntry ::= SEQUENCE { timeServerIpAddress IpAddress, timeServerIpStack INTEGER } timeServerIpAddress OBJECT-TYPE SYNTAX IpAddress ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IP address of a network time server that the module will attempt to synchronize with. The value of ipAddress must be unique across all Server components." ::= { timeServerProvEntry 1 } timeServerIpStack OBJECT-TYPE SYNTAX INTEGER { ipiFrIpiVc(1), vrIp(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IP stack that XNTP uses to communi- cate with the network time server. If ipiFrIpiVc is selected, then an IpiFr or IpiVc component must be provisioned on this module. If vrIp is selected, then Ip must be provisioned under the management Vr on this module." DEFVAL { ipiFrIpiVc } ::= { timeServerProvEntry 2 } timeServerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF TimeServerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { timeServer 12 } timeServerStateEntry OBJECT-TYPE SYNTAX TimeServerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the timeServerStateTable." INDEX { timeIndex, timeServerIndex } ::= { timeServerStateTable 1 } TimeServerStateEntry ::= SEQUENCE { timeServerAdminState INTEGER, timeServerOperationalState INTEGER, timeServerUsageState INTEGER } timeServerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { timeServerStateEntry 1 } timeServerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { timeServerStateEntry 2 } timeServerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { timeServerStateEntry 3 } timeServerOperTable OBJECT-TYPE SYNTAX SEQUENCE OF TimeServerOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Server component." ::= { timeServer 13 } timeServerOperEntry OBJECT-TYPE SYNTAX TimeServerOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the timeServerOperTable." INDEX { timeIndex, timeServerIndex } ::= { timeServerOperTable 1 } TimeServerOperEntry ::= SEQUENCE { timeServerXntpVersion Unsigned32, timeServerStratum Unsigned32, timeServerPoll Unsigned32, timeServerPktSent Counter32, timeServerPktRecv Counter32, timeServerPktValid Counter32, timeServerStatus OCTET STRING } timeServerXntpVersion OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the version of XNTP currently in use by the network time server." ::= { timeServerOperEntry 1 } timeServerStratum OBJECT-TYPE SYNTAX Unsigned32 (0..16) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the stratum level of the clock on the network time server." ::= { timeServerOperEntry 2 } timeServerPoll OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the time interval for the Passport module to poll the network time server for time synchronization." ::= { timeServerOperEntry 3 } timeServerPktSent OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the packets sent to the network time server." ::= { timeServerOperEntry 4 } timeServerPktRecv OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the packets received from the network time server, including the invalid packets." ::= { timeServerOperEntry 5 } timeServerPktValid OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the valid packets received from the network time server." ::= { timeServerOperEntry 6 } timeServerStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the status of the network time server. main -- This network time server is working properly, and is the system servers (synchronization sources) of the module. primary -- This network time server is working properly, and is the primary servers (one of the synchronization sources) of the module secondary -- This network time server is working properly, but its offset and dispersion is not stable or too high so that it can not be selected as one of the primary time synchronization sources. But if the primary synchronization sources are not available, it can take over the responsibility and become the time synchronization source of the module. unused -- This network time server is not used as a server (synchronization source) of the module. noResponse -- This network time server is not responding to the module's time synchronization request. This could be caused by network error or protocol error, or network time server configuration error. stratumTooHigh -- This network time server has the bad stratum (higher than 16), or its stratum is higher than the module's stratum. leapUnsync -- This network time server's leap value indicates that this network time server is not synchronized. clockUnsync -- This network time server's clock values indicates that this network time server is not synchronized. rootTooNoisy -- This network time server's root dispersion is too high, so that its time stamp is not used. peerTooNoisy -- The modules dispersion relative to this network time server is too high, so this network time server's time stamp is not used. faultStick -- This offset of the module relative to this network time server is out of the range or too high, so that it can not be selected as one of the primary time synchronization source. Description of bits: main(0) primary(1) secondary(2) unused(3) noResponse(4) stratumTooHigh(5) leapUnsync(6) clockUnsync(7) rootTooNoisy(8) peerTooNoisy(9) faultStick(10)" ::= { timeServerOperEntry 392 } -- NetworkSynchronization -- The NetworkSynchronization component administers the network -- clock synchronization. nS OBJECT IDENTIFIER ::= { components 20 } nSRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF NSRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of nS components." ::= { nS 1 } nSRowStatusEntry OBJECT-TYPE SYNTAX NSRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single nS component." INDEX { nSIndex } ::= { nSRowStatusTable 1 } NSRowStatusEntry ::= SEQUENCE { nSRowStatus RowStatus, nSComponentName DisplayString, nSStorageType StorageType, nSIndex NonReplicated } nSRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of nS components. These components can be added and deleted." ::= { nSRowStatusEntry 1 } nSComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { nSRowStatusEntry 2 } nSStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the nS tables." ::= { nSRowStatusEntry 4 } nSIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the nS tables." ::= { nSRowStatusEntry 10 } nSProvTable OBJECT-TYPE SYNTAX SEQUENCE OF NSProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains all of the provisioning data for the NetworkSynchronization component." ::= { nS 10 } nSProvEntry OBJECT-TYPE SYNTAX NSProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the nSProvTable." INDEX { nSIndex } ::= { nSProvTable 1 } NSProvEntry ::= SEQUENCE { nSPrimaryReference RowPointer, nSSecondaryReference RowPointer, nSTertiaryReference RowPointer } nSPrimaryReference OBJECT-TYPE SYNTAX RowPointer ACCESS read-write STATUS mandatory DESCRIPTION "This component name is the port that is the preferred choice as the reference for the network clock." ::= { nSProvEntry 1 } nSSecondaryReference OBJECT-TYPE SYNTAX RowPointer ACCESS read-write STATUS mandatory DESCRIPTION "This component name is the port that is the second choice for the reference for the network clock." ::= { nSProvEntry 2 } nSTertiaryReference OBJECT-TYPE SYNTAX RowPointer ACCESS read-write STATUS mandatory DESCRIPTION "This component name is the port that is the third choice for the reference for the network clock." ::= { nSProvEntry 3 } nSStateTable OBJECT-TYPE SYNTAX SEQUENCE OF NSStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { nS 11 } nSStateEntry OBJECT-TYPE SYNTAX NSStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the nSStateTable." INDEX { nSIndex } ::= { nSStateTable 1 } NSStateEntry ::= SEQUENCE { nSAdminState INTEGER, nSOperationalState INTEGER, nSUsageState INTEGER } nSAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { nSStateEntry 1 } nSOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { nSStateEntry 2 } nSUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { nSStateEntry 3 } nSOperTable OBJECT-TYPE SYNTAX SEQUENCE OF NSOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the network clock sync" ::= { nS 12 } nSOperEntry OBJECT-TYPE SYNTAX NSOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the nSOperTable." INDEX { nSIndex } ::= { nSOperTable 1 } NSOperEntry ::= SEQUENCE { nSClockSyncState INTEGER, nSActiveReference RowPointer, nSStandbyReference RowPointer } nSClockSyncState OBJECT-TYPE SYNTAX INTEGER { freeRun(0), synchronizing(1), synchronized(3) } ACCESS read-only STATUS mandatory DESCRIPTION "When the clockSyncState is in the freeRun state, either no reference have beed provisioned or none of the provisioned references have been found to be valid. The Stratum-3 clock is allowed to run freely at its last adjusted frequency. When the clockSyncState is in the synchronizing state, the Stratum-3 is trying to synchronize in frequency to a valid provisioned reference. This state should last approximately 1-2 minutes, provided the reference is stable. Once frequency synchronization is acheived, a null phase is acquired and the clockSyncState enters the synchronized state. In this state, both phase and frequency are tracked and compensated for. This node is now ready to support transparent data services." ::= { nSOperEntry 1 } nSActiveReference OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the active 8Khz clock reference source" ::= { nSOperEntry 2 } nSStandbyReference OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the standby 8Khz clock reference source which will be selected if a failure is detected on the active source." ::= { nSOperEntry 3 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { timeServerIpAddress, -- nSRowStatus, -- timeServerPktSent, -- nSPrimaryReference, -- timeComponentName, -- timeServerPktRecv, -- timeSyncSourcesValue, -- nSUsageState, -- timeServerUsageState, -- timeStorageType, -- timeMainServer, -- timeSyncStatus, -- nSComponentName, -- timeServerComponentName, -- timeModuleTime, -- nSStorageType, -- timeServerStorageType, -- timeServerPktValid, -- nSClockSyncState, -- timeOffset, -- nSOperationalState, -- timeServerOperationalState, -- timeServerStatus, -- timeServerXntpVersion, -- nSActiveReference, -- nSTertiaryReference, -- timeRowStatus, -- timeServerAdminState, -- timeServerIpStack, -- nSStandbyReference, -- timeXntpVersion, -- nSSecondaryReference, -- timeServerPoll, -- timeServerRowStatus, -- nSAdminState, -- timeServerStratum } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." timeGroup OBJECT IDENTIFIER ::= { timeMIB 1 } timeGroupBE OBJECT IDENTIFIER ::= { timeGroup 5 } timeGroupBE01 OBJECT IDENTIFIER ::= { timeGroupBE 2 } timeGroupBE01A OBJECT IDENTIFIER ::= { timeGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 Time." -- STATUS mandatory -- DESCRIPTION "Time MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-TimeMIB -- INCLUDES { timeGroupBE01A } timeCapabilities OBJECT IDENTIFIER ::= { timeMIB 3 } timeCapabilitiesBE OBJECT IDENTIFIER ::= { timeCapabilities 5 } timeCapabilitiesBE01 OBJECT IDENTIFIER ::= { timeCapabilitiesBE 2 } timeCapabilitiesBE01A OBJECT IDENTIFIER ::= { timeCapabilitiesBE01 2 } END