Nortel-Magellan-Passport-ServerAccessRsaMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, RowPointer, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, Hex, NonReplicated, EnterpriseDateAndTime, Link, AsciiStringIndex, DigitString FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9902010000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- ServerAccessRsa Enterprise MIB." serverAccessRsaMIB OBJECT IDENTIFIER ::= { passportMIBs 116 } -- RemoteServerAgent/ -- The Rsa component provides non-Passport based applications -- access to Passport servers via a Frame Relay SVC connection. The -- Rsa component can be provisioned on any Passport module in the -- network. Multiple Rsa components can be provisioned for load -- sharing and/or backup purposes. The component instance value is a -- unique string within the module. rsa OBJECT IDENTIFIER ::= { components 108 } rsaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of rsa components." ::= { rsa 1 } rsaRowStatusEntry OBJECT-TYPE SYNTAX RsaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rsa component." INDEX { rsaIndex } ::= { rsaRowStatusTable 1 } RsaRowStatusEntry ::= SEQUENCE { rsaRowStatus RowStatus, rsaComponentName DisplayString, rsaStorageType StorageType, rsaIndex AsciiStringIndex } rsaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rsa components. These components can be added and deleted." ::= { rsaRowStatusEntry 1 } rsaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rsaRowStatusEntry 2 } rsaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rsa tables." ::= { rsaRowStatusEntry 4 } rsaIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..8)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rsa tables." ::= { rsaRowStatusEntry 10 } rsaOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Options group defines provisionable attributes associated with the Rsa component." ::= { rsa 10 } rsaOptionsEntry OBJECT-TYPE SYNTAX RsaOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaOptionsTable." INDEX { rsaIndex } ::= { rsaOptionsTable 1 } RsaOptionsEntry ::= SEQUENCE { rsaLogicalProcessor Link } rsaLogicalProcessor OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the logical processor on which the RSA process will execute." ::= { rsaOptionsEntry 2 } rsaStateTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { rsa 11 } rsaStateEntry OBJECT-TYPE SYNTAX RsaStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaStateTable." INDEX { rsaIndex } ::= { rsaStateTable 1 } RsaStateEntry ::= SEQUENCE { rsaAdminState INTEGER, rsaOperationalState INTEGER, rsaUsageState INTEGER } rsaAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { rsaStateEntry 1 } rsaOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { rsaStateEntry 2 } rsaUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { rsaStateEntry 3 } rsaOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Operational group defines operational attributes associated with the Rsa component." ::= { rsa 12 } rsaOperationalEntry OBJECT-TYPE SYNTAX RsaOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaOperationalTable." INDEX { rsaIndex } ::= { rsaOperationalTable 1 } RsaOperationalEntry ::= SEQUENCE { rsaMaxRsiConnections INTEGER, rsaRsiConnections INTEGER } rsaMaxRsiConnections OBJECT-TYPE SYNTAX INTEGER (1000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of RSI connections which can be supported by this Rsa." ::= { rsaOperationalEntry 2 } rsaRsiConnections OBJECT-TYPE SYNTAX INTEGER (0..1000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the number of active RSI connections currently supported by the Rsa component." ::= { rsaOperationalEntry 3 } -- Rsa/n DataNetworkAddress -- This is the description of the Remote Server Agent Dna component. -- It includes the attributes which apply to a Vc between the RSI and -- RSA. rsaDna OBJECT IDENTIFIER ::= { rsa 2 } rsaDnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of rsaDna components." ::= { rsaDna 1 } rsaDnaRowStatusEntry OBJECT-TYPE SYNTAX RsaDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rsaDna component." INDEX { rsaIndex, rsaDnaIndex } ::= { rsaDnaRowStatusTable 1 } RsaDnaRowStatusEntry ::= SEQUENCE { rsaDnaRowStatus RowStatus, rsaDnaComponentName DisplayString, rsaDnaStorageType StorageType, rsaDnaIndex NonReplicated } rsaDnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rsaDna components. These components cannot be added nor deleted." ::= { rsaDnaRowStatusEntry 1 } rsaDnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rsaDnaRowStatusEntry 2 } rsaDnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rsaDna tables." ::= { rsaDnaRowStatusEntry 4 } rsaDnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rsaDna tables." ::= { rsaDnaRowStatusEntry 10 } rsaDnaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. The string of address digits is complemented by the type of address or Npi. These attributes are used to interpret the format of the address digits." ::= { rsaDna 10 } rsaDnaAddressEntry OBJECT-TYPE SYNTAX RsaDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaDnaAddressTable." INDEX { rsaIndex, rsaDnaIndex } ::= { rsaDnaAddressTable 1 } RsaDnaAddressEntry ::= SEQUENCE { rsaDnaNumberingPlanIndicator INTEGER, rsaDnaDataNetworkAddress DigitString } rsaDnaNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. An address may belong to the X.121 or E.164 numbering plans. X.121 is used in packet switched data networks." DEFVAL { x121 } ::= { rsaDnaAddressEntry 1 } rsaDnaDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The Dna attribute contains digits which form a unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where each phone number identifies a unique telephone set. Dna digits are selected and assigned by network operators." ::= { rsaDnaAddressEntry 2 } rsaDnaOutgoingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The OutgoingOptions group defines call options of a Dna for calls which are made out of the interface represented by the Dna. These options are not used for calls arriving to the interface represented by the Dna." ::= { rsaDna 11 } rsaDnaOutgoingOptionsEntry OBJECT-TYPE SYNTAX RsaDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaDnaOutgoingOptionsTable." INDEX { rsaIndex, rsaDnaIndex } ::= { rsaDnaOutgoingOptionsTable 1 } RsaDnaOutgoingOptionsEntry ::= SEQUENCE { rsaDnaOutCalls INTEGER } rsaDnaOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) can be made using this particular Dna. If set to a value of disallowed, then outgoing calls cannot be made using this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Outgoing Calls Barred' feature for Dnas in that outgoing calls are barred if this attribute is set to a value of disallowed. Either outCalls, or incCalls (or both) must be set to a value of allowed for this Dna to be usable." DEFVAL { disallowed } ::= { rsaDnaOutgoingOptionsEntry 1 } rsaDnaIncomingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "IncomingOptions defines the set of options for incoming calls. These options are used for calls arriving to the interface represented by the Dna. For calls originated from the interface, IncomingOptions attributes are not used." ::= { rsaDna 12 } rsaDnaIncomingOptionsEntry OBJECT-TYPE SYNTAX RsaDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaDnaIncomingOptionsTable." INDEX { rsaIndex, rsaDnaIndex } ::= { rsaDnaIncomingOptionsTable 1 } RsaDnaIncomingOptionsEntry ::= SEQUENCE { rsaDnaIncCalls INTEGER, rsaDnaIncAccess INTEGER } rsaDnaIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) can be made to this Dna. If set to a value of disallowed, then incoming calls cannot be made to this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Incoming Calls Barred' feature for Dna's in that incoming calls are barred if this attribute is set to a value of disallowed. Either outCalls, or incCalls (or both) must be set to a value of allowed for this Dna to be usable." DEFVAL { allowed } ::= { rsaDnaIncomingOptionsEntry 1 } rsaDnaIncAccess OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also permits incoming calls from DTEs that have Outgoing Access capabilities. If set to a value of disallowed, then such calls cannot be made to this Dna - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Closed User Group with Incoming Access' feature for Dnas in that incoming access is granted if this attribute is set to a value of allowed." DEFVAL { disallowed } ::= { rsaDnaIncomingOptionsEntry 9 } -- Rsa/n Dna ClosedUserGroup -- ClosedUserGroup defines options associated with a national or -- international Cug Identifier. Other Dnas in the network can have -- Cugs defined which group these Dnas by Cug interlockCode. If -- Dnas are defined with Cugs, calls from Dnas which do not have the -- same interlockCode defined are refused. Attributes incAccess and -- outAccess can override this rule. rsaDnaCug OBJECT IDENTIFIER ::= { rsaDna 2 } rsaDnaCugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of rsaDnaCug components." ::= { rsaDnaCug 1 } rsaDnaCugRowStatusEntry OBJECT-TYPE SYNTAX RsaDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rsaDnaCug component." INDEX { rsaIndex, rsaDnaIndex, rsaDnaCugIndex } ::= { rsaDnaCugRowStatusTable 1 } RsaDnaCugRowStatusEntry ::= SEQUENCE { rsaDnaCugRowStatus RowStatus, rsaDnaCugComponentName DisplayString, rsaDnaCugStorageType StorageType, rsaDnaCugIndex Integer32 } rsaDnaCugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rsaDnaCug components. These components can be added and deleted." ::= { rsaDnaCugRowStatusEntry 1 } rsaDnaCugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rsaDnaCugRowStatusEntry 2 } rsaDnaCugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rsaDnaCug tables." ::= { rsaDnaCugRowStatusEntry 4 } rsaDnaCugIndex OBJECT-TYPE SYNTAX Integer32 (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rsaDnaCug tables." ::= { rsaDnaCugRowStatusEntry 10 } rsaDnaCugCugOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Attributes in this group define ClosedUserGroup options associated with this particular interlockCode. Dna's with the same Cug (interlockCode) can make calls within this group. Various combinations which permit or prevent calls in the same Cug group are defined here." ::= { rsaDnaCug 10 } rsaDnaCugCugOptionsEntry OBJECT-TYPE SYNTAX RsaDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaDnaCugCugOptionsTable." INDEX { rsaIndex, rsaDnaIndex, rsaDnaCugIndex } ::= { rsaDnaCugCugOptionsTable 1 } RsaDnaCugCugOptionsEntry ::= SEQUENCE { rsaDnaCugType INTEGER, rsaDnaCugDnic DigitString, rsaDnaCugInterlockCode Unsigned32, rsaDnaCugPreferential INTEGER, rsaDnaCugOutCalls INTEGER, rsaDnaCugIncCalls INTEGER, rsaDnaCugPrivileged INTEGER } rsaDnaCugType OBJECT-TYPE SYNTAX INTEGER { national(0), international(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are usually established between DTEs for which there is no X.75 Gateway between. (National Cugs cannot normally traverse an X.75 Gateway). If this attribute is set to national, then the Cug is a national Cug, in which case, the dnic should be left at its default value since it is not part of a national Cug. If this attribute is set to international, then the Cug is an international Cug, in which case, the dnic should be set appropriately as part of the Cug interlockCode." DEFVAL { national } ::= { rsaDnaCugCugOptionsEntry 1 } rsaDnaCugDnic OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the dnic (Data Network ID Code) of the Cug by which packet networks are identified. This attribute is not applicable if the Cug is a national Cug, as specified by the Cug type attribute. There are usually 1 or 2 dnics assigned per country, for public networks. The U.S. is an exception where each BOC has a dnic. Also, a group of private networks can have its own dnic. dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T." DEFVAL { '30303030'H } -- "0000" ::= { rsaDnaCugCugOptionsEntry 2 } rsaDnaCugInterlockCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Cug identifier of a national or international Cug call. It is an arbitrary number and it also can be called Cug in some descriptions. Interfaces (Dna's) defined with this number can make calls to Dna's with the same interlockCode." DEFVAL { 0 } ::= { rsaDnaCugCugOptionsEntry 3 } rsaDnaCugPreferential OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to yes indicates that this Cug is the preferential Cug, in which case it will be used during the call establishment phase if the DTE has not explicitly specified a Cug index in the call request packet. If set to no, then this Cug is not the preferential Cug. Only one of the Cugs associated with a particular Dna can be the preferential Cug - only one Cug can have this attribute set to yes." DEFVAL { no } ::= { rsaDnaCugCugOptionsEntry 4 } rsaDnaCugOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular Cug. If set to a value of disallowed, then outgoing calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Outgoing Calls Barred' feature for Cugs in that outgoing calls are barred if this attribute is set to a value of disallowed." DEFVAL { disallowed } ::= { rsaDnaCugCugOptionsEntry 5 } rsaDnaCugIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) can be made using this particular Cug. If set to disallowed, then incoming calls cannot be made using this Cug - such calls will be cleared by the local DCE. This attribute corresponds to the ITU-T 'Incoming Calls Barred' feature for Cugs in that incoming calls are barred if this attribute is set to a value of disallowed." DEFVAL { allowed } ::= { rsaDnaCugCugOptionsEntry 6 } rsaDnaCugPrivileged OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute, if set to yes indicates that this Cug is a privileged Cug. In DPN, at least one side of a call setup within a Cug must have the Cug as a privileged Cug. If set to no, then the Cug is not privileged. If both the local DTE and the remote DTE subscribe to the Cug, but it is not privileged, then the call will be cleared. This attribute is typically used for a host DTE which must accept calls from many other DTEs in which case the other DTEs cannot call one another, but can call the host. In this example, the host would have the privileged Cug, and the other DTEs would belong to the same Cug, but it would not be privileged." DEFVAL { yes } ::= { rsaDnaCugCugOptionsEntry 7 } -- Rsa/ VncsAccess -- The VncsAccess component provides access to the Passport Voice -- Networking Call Server. rsaVncsAccess OBJECT IDENTIFIER ::= { rsa 3 } rsaVncsAccessRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaVncsAccessRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of rsaVncsAccess components." ::= { rsaVncsAccess 1 } rsaVncsAccessRowStatusEntry OBJECT-TYPE SYNTAX RsaVncsAccessRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rsaVncsAccess component." INDEX { rsaIndex, rsaVncsAccessIndex } ::= { rsaVncsAccessRowStatusTable 1 } RsaVncsAccessRowStatusEntry ::= SEQUENCE { rsaVncsAccessRowStatus RowStatus, rsaVncsAccessComponentName DisplayString, rsaVncsAccessStorageType StorageType, rsaVncsAccessIndex NonReplicated } rsaVncsAccessRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rsaVncsAccess components. These components can be added and deleted." ::= { rsaVncsAccessRowStatusEntry 1 } rsaVncsAccessComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rsaVncsAccessRowStatusEntry 2 } rsaVncsAccessStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rsaVncsAccess tables." ::= { rsaVncsAccessRowStatusEntry 4 } rsaVncsAccessIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rsaVncsAccess tables." ::= { rsaVncsAccessRowStatusEntry 10 } rsaVncsAccessProvisionedTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaVncsAccessProvisionedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisioned group defines provisioned attributes associated with the VncsAccess component." ::= { rsaVncsAccess 10 } rsaVncsAccessProvisionedEntry OBJECT-TYPE SYNTAX RsaVncsAccessProvisionedEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaVncsAccessProvisionedTable." INDEX { rsaIndex, rsaVncsAccessIndex } ::= { rsaVncsAccessProvisionedTable 1 } RsaVncsAccessProvisionedEntry ::= SEQUENCE { rsaVncsAccessTimeToLive INTEGER } rsaVncsAccessTimeToLive OBJECT-TYPE SYNTAX INTEGER (1..5) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the length of time VNCS requests are allowed to remain queued for transmission before they are considered too old and are discarded. This attribute should be set in considereation with the voice application timeout interval." DEFVAL { 2 } ::= { rsaVncsAccessProvisionedEntry 1 } rsaVncsAccessStateTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaVncsAccessStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { rsaVncsAccess 11 } rsaVncsAccessStateEntry OBJECT-TYPE SYNTAX RsaVncsAccessStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaVncsAccessStateTable." INDEX { rsaIndex, rsaVncsAccessIndex } ::= { rsaVncsAccessStateTable 1 } RsaVncsAccessStateEntry ::= SEQUENCE { rsaVncsAccessAdminState INTEGER, rsaVncsAccessOperationalState INTEGER, rsaVncsAccessUsageState INTEGER } rsaVncsAccessAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { rsaVncsAccessStateEntry 1 } rsaVncsAccessOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { rsaVncsAccessStateEntry 2 } rsaVncsAccessUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { rsaVncsAccessStateEntry 3 } rsaVncsAccessOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaVncsAccessOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Operational group defines operational attributes associated with the VncsAccess component." ::= { rsaVncsAccess 12 } rsaVncsAccessOperationalEntry OBJECT-TYPE SYNTAX RsaVncsAccessOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaVncsAccessOperationalTable." INDEX { rsaIndex, rsaVncsAccessIndex } ::= { rsaVncsAccessOperationalTable 1 } RsaVncsAccessOperationalEntry ::= SEQUENCE { rsaVncsAccessRequestsSent Counter32, rsaVncsAccessRepliesReceived Counter32, rsaVncsAccessRequestsQueued INTEGER, rsaVncsAccessRequestsDiscarded Counter32 } rsaVncsAccessRequestsSent OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of translation requests sent to VNCS. This counter wraps to zero when it reaches its maximum value." ::= { rsaVncsAccessOperationalEntry 1 } rsaVncsAccessRepliesReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of translation replies received from VNCS. This counter wraps to zero when it reaches its maximum value." ::= { rsaVncsAccessOperationalEntry 2 } rsaVncsAccessRequestsQueued OBJECT-TYPE SYNTAX INTEGER (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of translation requests queued for transmission to VNCS." DEFVAL { 0 } ::= { rsaVncsAccessOperationalEntry 3 } rsaVncsAccessRequestsDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of translation requests discarded before being sent to VNCS. Requests are discarded if the queue becomes too large or the VNCS server is unavailable. This counter wraps to zero when it reaches its maximum value." ::= { rsaVncsAccessOperationalEntry 4 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Rsa/ Connection/n -- Rsi Connection/n -- The Connection component contains information relating to the -- connection between the RSA and RSI. This component is named by -- the logical channel number of the connection. rsaConnection OBJECT IDENTIFIER ::= { rsa 4 } rsaConnectionRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rsaConnection components." ::= { rsaConnection 1 } rsaConnectionRowStatusEntry OBJECT-TYPE SYNTAX RsaConnectionRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rsaConnection component." INDEX { rsaIndex, rsaConnectionIndex } ::= { rsaConnectionRowStatusTable 1 } RsaConnectionRowStatusEntry ::= SEQUENCE { rsaConnectionRowStatus RowStatus, rsaConnectionComponentName DisplayString, rsaConnectionStorageType StorageType, rsaConnectionIndex Integer32 } rsaConnectionRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rsaConnection components. These components cannot be added nor deleted." ::= { rsaConnectionRowStatusEntry 1 } rsaConnectionComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rsaConnectionRowStatusEntry 2 } rsaConnectionStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rsaConnection tables." ::= { rsaConnectionRowStatusEntry 4 } rsaConnectionIndex OBJECT-TYPE SYNTAX Integer32 (1..1000) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rsaConnection tables." ::= { rsaConnectionRowStatusEntry 10 } rsaConnectionOperationalTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Operational group defines operational attributes associated with the Connection component." ::= { rsaConnection 10 } rsaConnectionOperationalEntry OBJECT-TYPE SYNTAX RsaConnectionOperationalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionOperationalTable." INDEX { rsaIndex, rsaConnectionIndex } ::= { rsaConnectionOperationalTable 1 } RsaConnectionOperationalEntry ::= SEQUENCE { rsaConnectionRemoteName AsciiString, rsaConnectionCallState INTEGER } rsaConnectionRemoteName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies an ASCII string identifier for the remote module which is retrieved from the call request as user data." ::= { rsaConnectionOperationalEntry 1 } rsaConnectionCallState OBJECT-TYPE SYNTAX INTEGER { initializing(0), creatingVc(1), calling(2), acceptingCall(3), registeringFmo(4), establishingLapf(5), dataTransfer(6), clearingCall(7), terminating(8), terminatingVc(9), terminated(10) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the state of the connection. The normal state for the connection is dataTransfer. The other states are transient states used to setup or clear the connection." ::= { rsaConnectionOperationalEntry 2 } rsaConnectionServerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionServerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The ServerStatistics group provides individual server usage statistics for the connection." ::= { rsaConnection 11 } rsaConnectionServerStatsEntry OBJECT-TYPE SYNTAX RsaConnectionServerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionServerStatsTable." INDEX { rsaIndex, rsaConnectionIndex } ::= { rsaConnectionServerStatsTable 1 } RsaConnectionServerStatsEntry ::= SEQUENCE { rsaConnectionVncsRequests Counter32, rsaConnectionVncsReplies Counter32 } rsaConnectionVncsRequests OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of VNCS translation requests sent or received on this connection." ::= { rsaConnectionServerStatsEntry 1 } rsaConnectionVncsReplies OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of VNCS translation replies sent or received on this connection." ::= { rsaConnectionServerStatsEntry 2 } rsaConnectionLapfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the LAPF status." ::= { rsaConnection 12 } rsaConnectionLapfStatusEntry OBJECT-TYPE SYNTAX RsaConnectionLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionLapfStatusTable." INDEX { rsaIndex, rsaConnectionIndex } ::= { rsaConnectionLapfStatusTable 1 } RsaConnectionLapfStatusEntry ::= SEQUENCE { rsaConnectionLapfState INTEGER, rsaConnectionLapfQueueSize Counter32 } rsaConnectionLapfState OBJECT-TYPE SYNTAX INTEGER { disconnected(1), linkSetup(2), disconnectRequest(4), informationTransfer(5), waitingAck(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the current state of the LAPF interface. The normal states are informationTransfer and waitingAck. Since the LAPF interface is not over a physical link the other states are transitional." ::= { rsaConnectionLapfStatusEntry 1 } rsaConnectionLapfQueueSize OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the number of frames in the LAPF transmit queue." ::= { rsaConnectionLapfStatusEntry 4 } rsaConnectionLapfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the LAPF statistics." ::= { rsaConnection 13 } rsaConnectionLapfStatsEntry OBJECT-TYPE SYNTAX RsaConnectionLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionLapfStatsTable." INDEX { rsaIndex, rsaConnectionIndex } ::= { rsaConnectionLapfStatsTable 1 } RsaConnectionLapfStatsEntry ::= SEQUENCE { rsaConnectionLapfStateChanges Counter32, rsaConnectionLapfRemoteBusy Counter32, rsaConnectionLapfAckTimeouts Counter32, rsaConnectionLapfRejectFramesRx Counter32, rsaConnectionLapfIFramesTx Counter32, rsaConnectionLapfIFramesTxDiscarded Counter32, rsaConnectionLapfIFramesRx Counter32, rsaConnectionLapfIFramesRxDiscarded Counter32 } rsaConnectionLapfStateChanges OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the LAPF interface has changed state. While the LAPF interface is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck and back. When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 1 } rsaConnectionLapfRemoteBusy OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 2 } rsaConnectionLapfAckTimeouts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate improper values have been chosen for ackTimer and ackDelayTimer between the local and remote ends. When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 3 } rsaConnectionLapfRejectFramesRx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of REJ frames received. When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 4 } rsaConnectionLapfIFramesTx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of I-frames transmitted. An I- frame may be counted more than once if there are retransmissions. When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 5 } rsaConnectionLapfIFramesTxDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of transmit I-frames that have been discarded. Discard reasons may be one of the following: 1. The frame length is beyond allowed limit. 2. The LAPF interface is in disconnected state. 3. The transmit queue has been purged because the queue length has reached the reset threshold. When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 6 } rsaConnectionLapfIFramesRx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of I-frames received. When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 7 } rsaConnectionLapfIFramesRxDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of received I-frames that have been discarded. The discard reasons are: 1. Incorrect frame size. 2. Frame is out of sequence. 3. Frame received while not in informationTransfer or waitingAck state. When this count reaches maximum, it wraps to zero." ::= { rsaConnectionLapfStatsEntry 8 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- This component defines attributes collected by Frame Relay Vc. rsaConnectionVc OBJECT IDENTIFIER ::= { rsaConnection 2 } rsaConnectionVcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rsaConnectionVc components." ::= { rsaConnectionVc 1 } rsaConnectionVcRowStatusEntry OBJECT-TYPE SYNTAX RsaConnectionVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single rsaConnectionVc component." INDEX { rsaIndex, rsaConnectionIndex, rsaConnectionVcIndex } ::= { rsaConnectionVcRowStatusTable 1 } RsaConnectionVcRowStatusEntry ::= SEQUENCE { rsaConnectionVcRowStatus RowStatus, rsaConnectionVcComponentName DisplayString, rsaConnectionVcStorageType StorageType, rsaConnectionVcIndex NonReplicated } rsaConnectionVcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of rsaConnectionVc components. These components cannot be added nor deleted." ::= { rsaConnectionVcRowStatusEntry 1 } rsaConnectionVcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { rsaConnectionVcRowStatusEntry 2 } rsaConnectionVcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the rsaConnectionVc tables." ::= { rsaConnectionVcRowStatusEntry 4 } rsaConnectionVcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the rsaConnectionVc tables." ::= { rsaConnectionVcRowStatusEntry 10 } rsaConnectionVcCadTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application." ::= { rsaConnectionVc 10 } rsaConnectionVcCadEntry OBJECT-TYPE SYNTAX RsaConnectionVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionVcCadTable." INDEX { rsaIndex, rsaConnectionIndex, rsaConnectionVcIndex } ::= { rsaConnectionVcCadTable 1 } RsaConnectionVcCadEntry ::= SEQUENCE { rsaConnectionVcType INTEGER, rsaConnectionVcState INTEGER, rsaConnectionVcPreviousState INTEGER, rsaConnectionVcDiagnosticCode Unsigned32, rsaConnectionVcPreviousDiagnosticCode Unsigned32, rsaConnectionVcCalledNpi INTEGER, rsaConnectionVcCalledDna DigitString, rsaConnectionVcCalledLcn Unsigned32, rsaConnectionVcCallingNpi INTEGER, rsaConnectionVcCallingDna DigitString, rsaConnectionVcCallingLcn Unsigned32, rsaConnectionVcAccountingEnabled INTEGER, rsaConnectionVcFastSelectCall INTEGER, rsaConnectionVcPathReliability INTEGER, rsaConnectionVcAccountingEnd INTEGER, rsaConnectionVcPriority INTEGER, rsaConnectionVcSegmentSize Unsigned32, rsaConnectionVcMaxSubnetPktSize Unsigned32, rsaConnectionVcRcosToNetwork INTEGER, rsaConnectionVcRcosFromNetwork INTEGER, rsaConnectionVcEmissionPriorityToNetwork INTEGER, rsaConnectionVcEmissionPriorityFromNetwork INTEGER, rsaConnectionVcDataPath AsciiString } rsaConnectionVcType OBJECT-TYPE SYNTAX INTEGER { svc(0), pvc(1), spvc(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the type of call, pvc,svc or spvc." ::= { rsaConnectionVcCadEntry 1 } rsaConnectionVcState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4." ::= { rsaConnectionVcCadEntry 2 } rsaConnectionVcPreviousState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing." ::= { rsaConnectionVcCadEntry 3 } rsaConnectionVcDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { rsaConnectionVcCadEntry 4 } rsaConnectionVcPreviousDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { rsaConnectionVcCadEntry 5 } rsaConnectionVcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the called end." ::= { rsaConnectionVcCadEntry 6 } rsaConnectionVcCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection." ::= { rsaConnectionVcCadEntry 7 } rsaConnectionVcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information." ::= { rsaConnectionVcCadEntry 8 } rsaConnectionVcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." ::= { rsaConnectionVcCadEntry 9 } rsaConnectionVcCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the calling end." ::= { rsaConnectionVcCadEntry 10 } rsaConnectionVcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the calling end." ::= { rsaConnectionVcCadEntry 11 } rsaConnectionVcAccountingEnabled OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options." ::= { rsaConnectionVcCadEntry 12 } rsaConnectionVcFastSelectCall OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays that this is a fast select call." ::= { rsaConnectionVcCadEntry 13 } rsaConnectionVcPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the path reliability." ::= { rsaConnectionVcCadEntry 19 } rsaConnectionVcAccountingEnd OBJECT-TYPE SYNTAX INTEGER { callingEnd(0), calledEnd(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record." ::= { rsaConnectionVcCadEntry 20 } rsaConnectionVcPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the call is a normal or a high priority call." ::= { rsaConnectionVcCadEntry 21 } rsaConnectionVcSegmentSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received." ::= { rsaConnectionVcCadEntry 22 } rsaConnectionVcMaxSubnetPktSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum packet size allowed on the Vc." ::= { rsaConnectionVcCadEntry 27 } rsaConnectionVcRcosToNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the routing metric routing class of service to the network." ::= { rsaConnectionVcCadEntry 28 } rsaConnectionVcRcosFromNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the routing metric Routing Class of Service from the Network." ::= { rsaConnectionVcCadEntry 29 } rsaConnectionVcEmissionPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity to the network." ::= { rsaConnectionVcCadEntry 30 } rsaConnectionVcEmissionPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity from the network." ::= { rsaConnectionVcCadEntry 31 } rsaConnectionVcDataPath OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed." ::= { rsaConnectionVcCadEntry 32 } rsaConnectionVcIntdTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued." ::= { rsaConnectionVc 11 } rsaConnectionVcIntdEntry OBJECT-TYPE SYNTAX RsaConnectionVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionVcIntdTable." INDEX { rsaIndex, rsaConnectionIndex, rsaConnectionVcIndex } ::= { rsaConnectionVcIntdTable 1 } RsaConnectionVcIntdEntry ::= SEQUENCE { rsaConnectionVcCallReferenceNumber Hex, rsaConnectionVcElapsedTimeTillNow Unsigned32, rsaConnectionVcSegmentsRx Unsigned32, rsaConnectionVcSegmentsSent Unsigned32, rsaConnectionVcStartTime EnterpriseDateAndTime } rsaConnectionVcCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { rsaConnectionVcIntdEntry 1 } rsaConnectionVcElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started." ::= { rsaConnectionVcIntdEntry 2 } rsaConnectionVcSegmentsRx OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state." ::= { rsaConnectionVcIntdEntry 3 } rsaConnectionVcSegmentsSent OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet." ::= { rsaConnectionVcIntdEntry 4 } rsaConnectionVcStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes." ::= { rsaConnectionVcIntdEntry 5 } rsaConnectionVcFrdTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers" ::= { rsaConnectionVc 12 } rsaConnectionVcFrdEntry OBJECT-TYPE SYNTAX RsaConnectionVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionVcFrdTable." INDEX { rsaIndex, rsaConnectionIndex, rsaConnectionVcIndex } ::= { rsaConnectionVcFrdTable 1 } RsaConnectionVcFrdEntry ::= SEQUENCE { rsaConnectionVcFrmCongestedToSubnet Unsigned32, rsaConnectionVcCannotForwardToSubnet Unsigned32, rsaConnectionVcNotDataXferToSubnet Unsigned32, rsaConnectionVcOutOfRangeFrmFromSubnet Unsigned32, rsaConnectionVcCombErrorsFromSubnet Unsigned32, rsaConnectionVcDuplicatesFromSubnet Unsigned32, rsaConnectionVcNotDataXferFromSubnet Unsigned32, rsaConnectionVcFrmLossTimeouts Unsigned32, rsaConnectionVcOoSeqByteCntExceeded Unsigned32, rsaConnectionVcPeakOoSeqPktCount Unsigned32, rsaConnectionVcPeakOoSeqFrmForwarded Unsigned32, rsaConnectionVcSendSequenceNumber Unsigned32, rsaConnectionVcPktRetryTimeouts Unsigned32, rsaConnectionVcPeakRetryQueueSize Unsigned32, rsaConnectionVcSubnetRecoveries Unsigned32, rsaConnectionVcOoSeqPktCntExceeded Unsigned32, rsaConnectionVcPeakOoSeqByteCount Unsigned32 } rsaConnectionVcFrmCongestedToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size." ::= { rsaConnectionVcFrdEntry 2 } rsaConnectionVcCannotForwardToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well." ::= { rsaConnectionVcFrdEntry 3 } rsaConnectionVcNotDataXferToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure." ::= { rsaConnectionVcFrdEntry 4 } rsaConnectionVcOutOfRangeFrmFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late." ::= { rsaConnectionVcFrdEntry 5 } rsaConnectionVcCombErrorsFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc" ::= { rsaConnectionVcFrdEntry 6 } rsaConnectionVcDuplicatesFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased." ::= { rsaConnectionVcFrdEntry 7 } rsaConnectionVcNotDataXferFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery." ::= { rsaConnectionVcFrdEntry 8 } rsaConnectionVcFrmLossTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { rsaConnectionVcFrdEntry 9 } rsaConnectionVcOoSeqByteCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { rsaConnectionVcFrdEntry 10 } rsaConnectionVcPeakOoSeqPktCount OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { rsaConnectionVcFrdEntry 11 } rsaConnectionVcPeakOoSeqFrmForwarded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue." ::= { rsaConnectionVcFrdEntry 12 } rsaConnectionVcSendSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame." ::= { rsaConnectionVcFrdEntry 13 } rsaConnectionVcPktRetryTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { rsaConnectionVcFrdEntry 15 } rsaConnectionVcPeakRetryQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets." ::= { rsaConnectionVcFrdEntry 16 } rsaConnectionVcSubnetRecoveries OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of successful Vc recovery attempts." ::= { rsaConnectionVcFrdEntry 17 } rsaConnectionVcOoSeqPktCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { rsaConnectionVcFrdEntry 19 } rsaConnectionVcPeakOoSeqByteCount OBJECT-TYPE SYNTAX Unsigned32 (0..50000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { rsaConnectionVcFrdEntry 20 } rsaConnectionVcDmepTable OBJECT-TYPE SYNTAX SEQUENCE OF RsaConnectionVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint." ::= { rsaConnectionVc 417 } rsaConnectionVcDmepEntry OBJECT-TYPE SYNTAX RsaConnectionVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the rsaConnectionVcDmepTable." INDEX { rsaIndex, rsaConnectionIndex, rsaConnectionVcIndex, rsaConnectionVcDmepValue } ::= { rsaConnectionVcDmepTable 1 } RsaConnectionVcDmepEntry ::= SEQUENCE { rsaConnectionVcDmepValue RowPointer } rsaConnectionVcDmepValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the rsaConnectionVcDmepTable." ::= { rsaConnectionVcDmepEntry 1 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { rsaConnectionVcFastSelectCall, -- rsaDnaCugInterlockCode, -- rsaConnectionVcComponentName, -- rsaDnaNumberingPlanIndicator, -- rsaVncsAccessAdminState, -- rsaLogicalProcessor, -- rsaConnectionVcMaxSubnetPktSize, -- rsaDnaCugOutCalls, -- rsaVncsAccessRowStatus, -- rsaConnectionLapfAckTimeouts, -- rsaConnectionVcCalledLcn, -- rsaConnectionVcPathReliability, -- rsaConnectionVcSendSequenceNumber, -- rsaConnectionVcPriority, -- rsaDnaCugPreferential, -- rsaConnectionVcCallReferenceNumber, -- rsaVncsAccessUsageState, -- rsaConnectionVcState, -- rsaComponentName, -- rsaMaxRsiConnections, -- rsaConnectionLapfIFramesTx, -- rsaVncsAccessOperationalState, -- rsaConnectionVcEmissionPriorityToNetwork, -- rsaDnaCugStorageType, -- rsaConnectionVcPeakOoSeqByteCount, -- rsaConnectionLapfQueueSize, -- rsaDnaCugPrivileged, -- rsaRsiConnections, -- rsaDnaCugIncCalls, -- rsaConnectionVcStorageType, -- rsaConnectionVncsReplies, -- rsaConnectionVcCallingLcn, -- rsaConnectionVcAccountingEnd, -- rsaConnectionVcCalledNpi, -- rsaConnectionVcElapsedTimeTillNow, -- rsaConnectionLapfIFramesRx, -- rsaConnectionVcPeakOoSeqPktCount, -- rsaDnaCugRowStatus, -- rsaConnectionVcNotDataXferToSubnet, -- rsaConnectionLapfRemoteBusy, -- rsaConnectionVcCannotForwardToSubnet, -- rsaDnaCugComponentName, -- rsaConnectionVcEmissionPriorityFromNetwork, -- rsaConnectionCallState, -- rsaConnectionLapfStateChanges, -- rsaStorageType, -- rsaConnectionVcRowStatus, -- rsaConnectionVcPreviousDiagnosticCode, -- rsaVncsAccessRequestsDiscarded, -- rsaDnaCugDnic, -- rsaConnectionLapfIFramesTxDiscarded, -- rsaConnectionRemoteName, -- rsaDnaComponentName, -- rsaConnectionVcCombErrorsFromSubnet, -- rsaConnectionVcCallingDna, -- rsaAdminState, -- rsaConnectionVcPeakOoSeqFrmForwarded, -- rsaConnectionVcSegmentsRx, -- rsaConnectionVcFrmCongestedToSubnet, -- rsaVncsAccessRequestsQueued, -- rsaConnectionVcRcosToNetwork, -- rsaRowStatus, -- rsaConnectionVcCallingNpi, -- rsaConnectionVncsRequests, -- rsaDnaOutCalls, -- rsaConnectionVcNotDataXferFromSubnet, -- rsaVncsAccessRepliesReceived, -- rsaConnectionVcDmepValue, -- rsaUsageState, -- rsaVncsAccessComponentName, -- rsaConnectionStorageType, -- rsaConnectionVcRcosFromNetwork, -- rsaConnectionVcDuplicatesFromSubnet, -- rsaConnectionVcStartTime, -- rsaOperationalState, -- rsaConnectionVcDiagnosticCode, -- rsaVncsAccessTimeToLive, -- rsaConnectionLapfRejectFramesRx, -- rsaDnaDataNetworkAddress, -- rsaConnectionRowStatus, -- rsaConnectionVcOoSeqByteCntExceeded, -- rsaDnaStorageType, -- rsaDnaCugType, -- rsaConnectionVcPktRetryTimeouts, -- rsaConnectionVcOutOfRangeFrmFromSubnet, -- rsaDnaIncCalls, -- rsaConnectionVcCalledDna, -- rsaConnectionVcType, -- rsaConnectionVcAccountingEnabled, -- rsaConnectionVcFrmLossTimeouts, -- rsaVncsAccessRequestsSent, -- rsaConnectionVcPreviousState, -- rsaConnectionLapfIFramesRxDiscarded, -- rsaConnectionVcSubnetRecoveries, -- rsaConnectionVcOoSeqPktCntExceeded, -- rsaConnectionVcPeakRetryQueueSize, -- rsaDnaRowStatus, -- rsaConnectionLapfState, -- rsaConnectionComponentName, -- rsaVncsAccessStorageType, -- rsaDnaIncAccess, -- rsaConnectionVcSegmentSize, -- rsaConnectionVcSegmentsSent, -- rsaConnectionVcDataPath } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." serverAccessRsaGroup OBJECT IDENTIFIER ::= { serverAccessRsaMIB 1 } serverAccessRsaGroupBE OBJECT IDENTIFIER ::= { serverAccessRsaGroup 5 } serverAccessRsaGroupBE01 OBJECT IDENTIFIER ::= { serverAccessRsaGroupBE 2 } serverAccessRsaGroupBE01A OBJECT IDENTIFIER ::= { serverAccessRsaGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 ServerAccessRsa." -- STATUS mandatory -- DESCRIPTION "ServerAccessRsa MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-ServerAccessRsaMIB -- INCLUDES { serverAccessRsaGroupBE01A } serverAccessRsaCapabilities OBJECT IDENTIFIER ::= { serverAccessRsaMIB 3 } serverAccessRsaCapabilitiesBE OBJECT IDENTIFIER ::= { serverAccessRsaCapabilities 5 } serverAccessRsaCapabilitiesBE01 OBJECT IDENTIFIER ::= { serverAccessRsaCapabilitiesBE 2 } serverAccessRsaCapabilitiesBE01A OBJECT IDENTIFIER ::= { serverAccessRsaCapabilitiesBE01 2 } END