Nortel-Magellan-Passport-PppMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, InterfaceIndex, Gauge32, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB NonReplicated, Link FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9603010000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- Ppp Enterprise MIB." pppMIB OBJECT IDENTIFIER ::= { passportMIBs 33 } -- PointToPointProtocol/n -- This component defines an instance of the Ppp link level protocol. The -- component instance value is a unique number. ppp OBJECT IDENTIFIER ::= { components 102 } pppRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of ppp components." ::= { ppp 1 } pppRowStatusEntry OBJECT-TYPE SYNTAX PppRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single ppp component." INDEX { pppIndex } ::= { pppRowStatusTable 1 } PppRowStatusEntry ::= SEQUENCE { pppRowStatus RowStatus, pppComponentName DisplayString, pppStorageType StorageType, pppIndex Integer32 } pppRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of ppp components. These components can be added and deleted." ::= { pppRowStatusEntry 1 } pppComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppRowStatusEntry 2 } pppStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the ppp tables." ::= { pppRowStatusEntry 4 } pppIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the ppp tables." ::= { pppRowStatusEntry 10 } pppCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF PppCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { ppp 20 } pppCidDataEntry OBJECT-TYPE SYNTAX PppCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppCidDataTable." INDEX { pppIndex } ::= { pppCidDataTable 1 } PppCidDataEntry ::= SEQUENCE { pppCustomerIdentifier Unsigned32 } pppCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { pppCidDataEntry 1 } pppIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF PppIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { ppp 21 } pppIfEntryEntry OBJECT-TYPE SYNTAX PppIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppIfEntryTable." INDEX { pppIndex } ::= { pppIfEntryTable 1 } PppIfEntryEntry ::= SEQUENCE { pppIfAdminStatus INTEGER, pppIfIndex InterfaceIndex } pppIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { pppIfEntryEntry 1 } pppIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { pppIfEntryEntry 2 } pppMpTable OBJECT-TYPE SYNTAX SEQUENCE OF PppMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Media Application component." ::= { ppp 22 } pppMpEntry OBJECT-TYPE SYNTAX PppMpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppMpTable." INDEX { pppIndex } ::= { pppMpTable 1 } PppMpEntry ::= SEQUENCE { pppLinkToProtocolPort Link } pppLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a protocol port component name. The attribute associates the application with a protocol port." ::= { pppMpEntry 1 } pppStateTable OBJECT-TYPE SYNTAX SEQUENCE OF PppStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { ppp 23 } pppStateEntry OBJECT-TYPE SYNTAX PppStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppStateTable." INDEX { pppIndex } ::= { pppStateTable 1 } PppStateEntry ::= SEQUENCE { pppAdminState INTEGER, pppOperationalState INTEGER, pppUsageState INTEGER } pppAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { pppStateEntry 1 } pppOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { pppStateEntry 2 } pppUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { pppStateEntry 3 } pppOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { ppp 24 } pppOperStatusEntry OBJECT-TYPE SYNTAX PppOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppOperStatusTable." INDEX { pppIndex } ::= { pppOperStatusTable 1 } PppOperStatusEntry ::= SEQUENCE { pppSnmpOperStatus INTEGER } pppSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { pppOperStatusEntry 1 } -- Ppp/n Link -- This component is used to contain all the attributes related to the Ppp -- link. This is a mandatory subcomponent of Ppp and does not need to be -- added. pppLnk OBJECT IDENTIFIER ::= { ppp 2 } pppLnkRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLnkRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of pppLnk components." ::= { pppLnk 1 } pppLnkRowStatusEntry OBJECT-TYPE SYNTAX PppLnkRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single pppLnk component." INDEX { pppIndex, pppLnkIndex } ::= { pppLnkRowStatusTable 1 } PppLnkRowStatusEntry ::= SEQUENCE { pppLnkRowStatus RowStatus, pppLnkComponentName DisplayString, pppLnkStorageType StorageType, pppLnkIndex NonReplicated } pppLnkRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of pppLnk components. These components cannot be added nor deleted." ::= { pppLnkRowStatusEntry 1 } pppLnkComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppLnkRowStatusEntry 2 } pppLnkStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the pppLnk tables." ::= { pppLnkRowStatusEntry 4 } pppLnkIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the pppLnk tables." ::= { pppLnkRowStatusEntry 10 } pppLnkProvTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLnkProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the Ppp Link component." ::= { pppLnk 10 } pppLnkProvEntry OBJECT-TYPE SYNTAX PppLnkProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLnkProvTable." INDEX { pppIndex, pppLnkIndex } ::= { pppLnkProvTable 1 } PppLnkProvEntry ::= SEQUENCE { pppLnkConfigInitialMru Unsigned32, pppLnkConfigMagicNumber INTEGER, pppLnkRestartTimer Unsigned32, pppLnkContinuityMonitor INTEGER, pppLnkNegativeAckTries Unsigned32, pppLnkQualityThreshold Unsigned32, pppLnkQualityWindow Unsigned32, pppLnkTerminateRequestTries Unsigned32, pppLnkConfigureRequestTries Unsigned32 } pppLnkConfigInitialMru OBJECT-TYPE SYNTAX Unsigned32 (68..18000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the initial Maximum Receive Unit (Mru) that the local Ppp entity will advertise to the remote entity. A change to this attribute will not take effect until Ppp is restarted (lock/unlock)." DEFVAL { 18000 } ::= { pppLnkProvEntry 1 } pppLnkConfigMagicNumber OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If enabled then the local node will attempt to perform Magic Number negotiation with the remote node. If disabled then this negotiation is not performed. In any event, the local node will comply with any magic number negotiations attempted by the remote node, per the Ppp specification. A change to this attribute will not take effect until Ppp is restarted (lock/unlock)." DEFVAL { enabled } ::= { pppLnkProvEntry 4 } pppLnkRestartTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This is the time, in milliseconds, that Ppp will wait for a response to a configure request or a terminate request before retrying." DEFVAL { 3000 } ::= { pppLnkProvEntry 6 } pppLnkContinuityMonitor OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute turns on/off (enabled/disabled) the Link Continuity Monitor. If set to enabled, periodic keep alive echo packet will be sent over the Ppp link. If set to disabled, no keep alive packets will be sent. A change to this attribute will not take effect until Ppp is restarted (lock/ unlock)." DEFVAL { enabled } ::= { pppLnkProvEntry 7 } pppLnkNegativeAckTries OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum negative acknowledgments sent to the remote Ppp entity during negotiation before defaulting it's configuration parameters." DEFVAL { 10 } ::= { pppLnkProvEntry 8 } pppLnkQualityThreshold OBJECT-TYPE SYNTAX Unsigned32 (10..99) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the minimum allowed line quality before the line is considered too poor to continue operation. The value for this attribute is a percentage measure of the line quality given in integers (10 to 99). The higher the value, the more stringent the line requirements." DEFVAL { 90 } ::= { pppLnkProvEntry 9 } pppLnkQualityWindow OBJECT-TYPE SYNTAX Unsigned32 (10..400) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of seconds used for sampling line quality. If line quality drops below the level set with the qualityThreshold attribute during this window, this instance of Ppp will be marked down until line quality recovers." DEFVAL { 30 } ::= { pppLnkProvEntry 10 } pppLnkTerminateRequestTries OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum terminate requests to be sent, when closing the connection, and not answered before this instance of Ppp enters a closing state." DEFVAL { 10 } ::= { pppLnkProvEntry 11 } pppLnkConfigureRequestTries OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of configuration requests that will be sent out and not answered before this instance of Ppp enters a listening state. If both sides enter the listening state then the link will not come up. To eliminate this possibility, this attribute should be set to 1000000000. This will ensure that this end of the Ppp link will continue to try until the link is good." DEFVAL { 1000000000 } ::= { pppLnkProvEntry 12 } pppLnkOperTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLnkOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Ppp Link Operational attributes." ::= { pppLnk 11 } pppLnkOperEntry OBJECT-TYPE SYNTAX PppLnkOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLnkOperTable." INDEX { pppIndex, pppLnkIndex } ::= { pppLnkOperTable 1 } PppLnkOperEntry ::= SEQUENCE { pppLnkOperState INTEGER, pppLnkLineCondition INTEGER, pppLnkBadAddresses Counter32, pppLnkBadControls Counter32, pppLnkPacketTooLongs Counter32, pppLnkBadFcss Counter32, pppLnkLocalMru Unsigned32, pppLnkRemoteMru Unsigned32, pppLnkTransmitFcsSize Unsigned32, pppLnkReceiveFcsSize Unsigned32 } pppLnkOperState OBJECT-TYPE SYNTAX INTEGER { initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the operational state of the Link Control Protocol. For more information as to the definition of each state see RFC1331 section 5.3." DEFVAL { initial } ::= { pppLnkOperEntry 1 } pppLnkLineCondition OBJECT-TYPE SYNTAX INTEGER { ok(0), looped(1), noClock(3), badLineCondition(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute describes the condition of the physical line that Ppp is running over. ok: The condition of the line is good. looped: The line is looped back on itself, probably at the remote end. noClock: There is a hardware problem with the line. The cable may not be plugged in correctly. badLineCondition: The quality of the line is below the qualityThreshold." DEFVAL { ok } ::= { pppLnkOperEntry 2 } pppLnkBadAddresses OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received with an incorrect Address Field. If this count is going up quickly, it could indicate that there is a line quality problem or that the remote end is transmitting a protocol other than Ppp. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLnkOperEntry 4 } pppLnkBadControls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received on this link with an incorrect Control Field. If this count is going up quickly, it could indicate that there is a line quality problem or that the remote end is transmitting a protocol other than Ppp. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLnkOperEntry 5 } pppLnkPacketTooLongs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received that have been discarded because their length exceeded the Maximum Receive Unit (Mru). This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLnkOperEntry 6 } pppLnkBadFcss OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received that have been discarded due to having an incorrect Frame Check Sequence (Fcs). This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLnkOperEntry 7 } pppLnkLocalMru OBJECT-TYPE SYNTAX Unsigned32 (1..2147483648) ACCESS read-only STATUS mandatory DESCRIPTION "This is the current value of the Maximum Receive Unit (Mru) for the local Ppp Entity. This value is the Mru that the remote entity is using when sending packets to the local Ppp entity." DEFVAL { 1 } ::= { pppLnkOperEntry 8 } pppLnkRemoteMru OBJECT-TYPE SYNTAX Unsigned32 (1..2147483648) ACCESS read-only STATUS mandatory DESCRIPTION "This is the current value of the Maximum Receive Unit (Mru) for the remote Ppp entity. This value is the Mru that the local entity is using when sending packets to the remote Ppp entity." ::= { pppLnkOperEntry 9 } pppLnkTransmitFcsSize OBJECT-TYPE SYNTAX Unsigned32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This is the size of the Frame Check Sequence (Fcs) in bits that the local node will generate when sending packets to the remote node." DEFVAL { 0 } ::= { pppLnkOperEntry 16 } pppLnkReceiveFcsSize OBJECT-TYPE SYNTAX Unsigned32 (0..128) ACCESS read-only STATUS mandatory DESCRIPTION "This is the size of the Frame Check Sequence (Fcs) in bits that the remote node will generate when sending packets to the local node." DEFVAL { 0 } ::= { pppLnkOperEntry 17 } -- Ppp/n LinkQualityMonitor -- This component is used to contain all the operational attributes for the -- Ppp Link Quality Monitor. This is a mandatory subcomponent of Ppp -- and does not need to be manually added. pppLqm OBJECT IDENTIFIER ::= { ppp 3 } pppLqmRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLqmRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of pppLqm components." ::= { pppLqm 1 } pppLqmRowStatusEntry OBJECT-TYPE SYNTAX PppLqmRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single pppLqm component." INDEX { pppIndex, pppLqmIndex } ::= { pppLqmRowStatusTable 1 } PppLqmRowStatusEntry ::= SEQUENCE { pppLqmRowStatus RowStatus, pppLqmComponentName DisplayString, pppLqmStorageType StorageType, pppLqmIndex NonReplicated } pppLqmRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of pppLqm components. These components cannot be added nor deleted." ::= { pppLqmRowStatusEntry 1 } pppLqmComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppLqmRowStatusEntry 2 } pppLqmStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the pppLqm tables." ::= { pppLqmRowStatusEntry 4 } pppLqmIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the pppLqm tables." ::= { pppLqmRowStatusEntry 10 } pppLqmProvTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLqmProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the Ppp Link Quality Monitor component." ::= { pppLqm 10 } pppLqmProvEntry OBJECT-TYPE SYNTAX PppLqmProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLqmProvTable." INDEX { pppIndex, pppLqmIndex } ::= { pppLqmProvTable 1 } PppLqmProvEntry ::= SEQUENCE { pppLqmConfigPeriod Unsigned32, pppLqmConfigStatus INTEGER } pppLqmConfigPeriod OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS mandatory DESCRIPTION "This is the Lqm reporting period that the local Ppp entity will attempt to negotiate with the remote entity, in units of hundredths of a second. A value of '0' will allow the remote Ppp entity to determine the reporting period. A value greater than 180,000 (1/2 hour) will allow the period to be determined dynamically as a function of the transmit data rate. A value from 1-9 will be rounded up to 10 during negotiation. A change to this attribute will not take effect until Ppp is restarted (lock/unlock)." DEFVAL { 0 } ::= { pppLqmProvEntry 1 } pppLqmConfigStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is enabled, the local node will attempt to perform Lqm negotiation with the remote node. If it is disabled then this negotiation is not performed. A change to this attribute will not take effect until Ppp is restarted (lock/unlock)." DEFVAL { disabled } ::= { pppLqmProvEntry 2 } pppLqmOperTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLqmOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the Ppp Link Quality Monitor component." ::= { pppLqm 11 } pppLqmOperEntry OBJECT-TYPE SYNTAX PppLqmOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLqmOperTable." INDEX { pppIndex, pppLqmIndex } ::= { pppLqmOperTable 1 } PppLqmOperEntry ::= SEQUENCE { pppLqmQuality INTEGER, pppLqmInGoodOctets Counter32, pppLqmLocalPeriod Unsigned32, pppLqmRemotePeriod Unsigned32, pppLqmOutLqrs Counter32, pppLqmInLqrs Counter32 } pppLqmQuality OBJECT-TYPE SYNTAX INTEGER { good(1), bad(2), notDetermined(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the current quality of the link as declared by the local Ppp entity's Link-Quality Management modules. A value of good indicates that LinkQualityMonitor configStatus is enabled and Link quality is above Link qualityThreshold. A value of bad indicates that LinkQualityMonitor configStatus is enabled and Link quality is not above Link qualityThreshold. A value of notDetermined indicates that LinkQualityMonitor configStatus is enabled and the quality of the link has not been calculated yet or LinkQualityMonitor configStatus is disabled." DEFVAL { notDetermined } ::= { pppLqmOperEntry 1 } pppLqmInGoodOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of good octets received. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLqmOperEntry 2 } pppLqmLocalPeriod OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Lqm reporting period, in hundredths of a second that is in effect for the local Ppp entity." DEFVAL { 1 } ::= { pppLqmOperEntry 3 } pppLqmRemotePeriod OBJECT-TYPE SYNTAX Unsigned32 (1..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This is the Lqm reporting period, in hundredths of a second, that is in effect for the remote Ppp entity." DEFVAL { 1 } ::= { pppLqmOperEntry 4 } pppLqmOutLqrs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of link quality reports sent out. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLqmOperEntry 5 } pppLqmInLqrs OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of link quality reports received. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLqmOperEntry 6 } -- Ppp/n NetworkControlProtocol -- This component is used to contain all the operational attributes for the -- Ppp Network Control Protocols (Ncp). This is a mandatory -- subcomponent of Ppp and does not need to be manually added. pppNcp OBJECT IDENTIFIER ::= { ppp 4 } pppNcpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of pppNcp components." ::= { pppNcp 1 } pppNcpRowStatusEntry OBJECT-TYPE SYNTAX PppNcpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single pppNcp component." INDEX { pppIndex, pppNcpIndex } ::= { pppNcpRowStatusTable 1 } PppNcpRowStatusEntry ::= SEQUENCE { pppNcpRowStatus RowStatus, pppNcpComponentName DisplayString, pppNcpStorageType StorageType, pppNcpIndex NonReplicated } pppNcpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of pppNcp components. These components cannot be added nor deleted." ::= { pppNcpRowStatusEntry 1 } pppNcpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppNcpRowStatusEntry 2 } pppNcpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the pppNcp tables." ::= { pppNcpRowStatusEntry 4 } pppNcpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the pppNcp tables." ::= { pppNcpRowStatusEntry 10 } pppNcpBprovTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpBprovEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the Bridge Network Control Protocol." ::= { pppNcp 11 } pppNcpBprovEntry OBJECT-TYPE SYNTAX PppNcpBprovEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppNcpBprovTable." INDEX { pppIndex, pppNcpIndex } ::= { pppNcpBprovTable 1 } PppNcpBprovEntry ::= SEQUENCE { pppNcpBConfigTinygram INTEGER, pppNcpBConfigLanId INTEGER } pppNcpBConfigTinygram OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set to disabled then the local Bridge Network Control Protocol (Bncp) entity will not initiate the tinygram compression option negotiation. If it is enabled then the local Bncp entity will initiate negotiation of this option. A change to this attribute will not take effect until Ppp is restarted (lock/unlock)." DEFVAL { enabled } ::= { pppNcpBprovEntry 1 } pppNcpBConfigLanId OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set to disabled then the local Bncp entity will not initiate the lan identification option negotiation. If it is enabled then the local Bncp entity will initiate negotiation of the option. A change to this attribute will not take effect until Ppp is restarted (lock/unlock)." DEFVAL { enabled } ::= { pppNcpBprovEntry 4 } pppNcpIpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpIpOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Ip Network Control Protocol operational attributes." ::= { pppNcp 12 } pppNcpIpOperEntry OBJECT-TYPE SYNTAX PppNcpIpOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppNcpIpOperTable." INDEX { pppIndex, pppNcpIndex } ::= { pppNcpIpOperTable 1 } PppNcpIpOperEntry ::= SEQUENCE { pppNcpIpOperState INTEGER } pppNcpIpOperState OBJECT-TYPE SYNTAX INTEGER { initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the operational state of the Ip network protocol. For more information as to the definition of each state see RFC1331 section 5.3." DEFVAL { initial } ::= { pppNcpIpOperEntry 1 } pppNcpBoperTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpBoperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Bridge Network Control Protocol operational attributes." ::= { pppNcp 14 } pppNcpBoperEntry OBJECT-TYPE SYNTAX PppNcpBoperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppNcpBoperTable." INDEX { pppIndex, pppNcpIndex } ::= { pppNcpBoperTable 1 } PppNcpBoperEntry ::= SEQUENCE { pppNcpBOperState INTEGER, pppNcpBLocalToRemoteTinygramComp INTEGER, pppNcpBRemoteToLocalTinygramComp INTEGER, pppNcpBLocalToRemoteLanId INTEGER, pppNcpBRemoteToLocalLanId INTEGER } pppNcpBOperState OBJECT-TYPE SYNTAX INTEGER { initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the operational status of the bridge network protocol. For more information as to the definition of each state see RFC1331 section 5.3." DEFVAL { initial } ::= { pppNcpBoperEntry 1 } pppNcpBLocalToRemoteTinygramComp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the local node will perform tinygram compression when sending packets to the remote entity. If it is disabled then the local entity will not perform tinygram compression. If it is enabled then the local entity will perform tinygram compression." DEFVAL { disabled } ::= { pppNcpBoperEntry 3 } pppNcpBRemoteToLocalTinygramComp OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If this attribute is disabled then the remote entity is not expected to perform tinygram compression. If it is enabled then the remote entity is expected to perform tinygram compression." DEFVAL { disabled } ::= { pppNcpBoperEntry 4 } pppNcpBLocalToRemoteLanId OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the local node will include the lan identification field in transmitted packets or not. If it is disabled then the local node will not transmit this field, enabled means that the field will be transmitted." DEFVAL { disabled } ::= { pppNcpBoperEntry 5 } pppNcpBRemoteToLocalLanId OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the remote node has indicated that it will include the lan identification field in transmitted packets or not. If it is disabled then the field will not be transmitted, if enabled then the field will be transmitted." DEFVAL { disabled } ::= { pppNcpBoperEntry 6 } pppNcpOperTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for any Network Control Protocols other than Ip and Bridge." ::= { pppNcp 16 } pppNcpOperEntry OBJECT-TYPE SYNTAX PppNcpOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppNcpOperTable." INDEX { pppIndex, pppNcpIndex } ::= { pppNcpOperTable 1 } PppNcpOperEntry ::= SEQUENCE { pppNcpAppletalkOperState INTEGER, pppNcpIpxOperState INTEGER, pppNcpXnsOperState INTEGER, pppNcpDecnetOperState INTEGER } pppNcpAppletalkOperState OBJECT-TYPE SYNTAX INTEGER { initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the operational state of the AppleTalk network protocol. For more information as to the definition of each state see RFC1331 section 5.3." DEFVAL { initial } ::= { pppNcpOperEntry 1 } pppNcpIpxOperState OBJECT-TYPE SYNTAX INTEGER { initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the operational state of the Ipx network protocol. For more information as to the definition of each state see RFC1331 section 5.3." DEFVAL { initial } ::= { pppNcpOperEntry 2 } pppNcpXnsOperState OBJECT-TYPE SYNTAX INTEGER { initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the operational state of the Xns network protocol. For more information as to the definition of each state see RFC1331 section 5.3." DEFVAL { initial } ::= { pppNcpOperEntry 3 } pppNcpDecnetOperState OBJECT-TYPE SYNTAX INTEGER { initial(0), starting(1), closed(2), stopped(3), closing(4), stopping(5), reqsent(6), ackrcvd(7), acksent(8), opened(9) } ACCESS read-only STATUS mandatory DESCRIPTION "This is the operational state of the DecNet network protocol. For more information as to the definition of each state see RFC1331 section 5.3." DEFVAL { initial } ::= { pppNcpOperEntry 4 } -- Ppp/n Ncp BridgeMediaConfigEntry/n -- This component is one entry in the BridgeMediaConfigEntry table. -- There are four of these components automatically added to create the -- table. The instances of this component are the mac types for which the -- data in this table entry pertains to. -- 1) ethernet - IEEE 802.3/Ethernet -- 2) tokenBus - IEEE 802.4/Token Bus -- 3) tokenRing - IEEE 802.5/Token Ring -- 4) fddi - Fddi pppNcpBmcEntry OBJECT IDENTIFIER ::= { pppNcp 2 } pppNcpBmcEntryRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpBmcEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of pppNcpBmcEntry components." ::= { pppNcpBmcEntry 1 } pppNcpBmcEntryRowStatusEntry OBJECT-TYPE SYNTAX PppNcpBmcEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single pppNcpBmcEntry component." INDEX { pppIndex, pppNcpIndex, pppNcpBmcEntryMacTypeIndex } ::= { pppNcpBmcEntryRowStatusTable 1 } PppNcpBmcEntryRowStatusEntry ::= SEQUENCE { pppNcpBmcEntryRowStatus RowStatus, pppNcpBmcEntryComponentName DisplayString, pppNcpBmcEntryStorageType StorageType, pppNcpBmcEntryMacTypeIndex INTEGER } pppNcpBmcEntryRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of pppNcpBmcEntry components. These components can be added." ::= { pppNcpBmcEntryRowStatusEntry 1 } pppNcpBmcEntryComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppNcpBmcEntryRowStatusEntry 2 } pppNcpBmcEntryStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the pppNcpBmcEntry tables." ::= { pppNcpBmcEntryRowStatusEntry 4 } pppNcpBmcEntryMacTypeIndex OBJECT-TYPE SYNTAX INTEGER { ethernet(1), tokenBus(2), tokenRing(3), fddi(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the pppNcpBmcEntry tables." ::= { pppNcpBmcEntryRowStatusEntry 10 } pppNcpBmcEntryProvTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpBmcEntryProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attributes for one entry in the BridgeMediaConfigEntry table." ::= { pppNcpBmcEntry 10 } pppNcpBmcEntryProvEntry OBJECT-TYPE SYNTAX PppNcpBmcEntryProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppNcpBmcEntryProvTable." INDEX { pppIndex, pppNcpIndex, pppNcpBmcEntryMacTypeIndex } ::= { pppNcpBmcEntryProvTable 1 } PppNcpBmcEntryProvEntry ::= SEQUENCE { pppNcpBmcEntryLocalStatus INTEGER } pppNcpBmcEntryLocalStatus OBJECT-TYPE SYNTAX INTEGER { accept(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates whether the local Ppp bridging entity should accept packets of the protocol type identified by the instance value of this component. Setting this attribute to accept allows packets of this protocol type to be accepted. A change to this attribute will not take effect until Ppp is restarted (lock/unlock)." DEFVAL { accept } ::= { pppNcpBmcEntryProvEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Ppp/n Ncp BridgeMediaEntry/n -- This component is one entry in the BridgeMediaEntry table. There will -- be four of these components created automatically to create the table. -- The instances of this component are the mac types for which the data in -- this table entry pertains to. -- 1) ethernet - IEEE 802.3/Ethernet -- 2) tokenBus - IEEE 802.4/Token Bus -- 3) tokenRing - IEEE 802.5/Token Ring -- 4) fddi - Fddi pppNcpBmEntry OBJECT IDENTIFIER ::= { pppNcp 3 } pppNcpBmEntryRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpBmEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of pppNcpBmEntry components." ::= { pppNcpBmEntry 1 } pppNcpBmEntryRowStatusEntry OBJECT-TYPE SYNTAX PppNcpBmEntryRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single pppNcpBmEntry component." INDEX { pppIndex, pppNcpIndex, pppNcpBmEntryMacTypeIndex } ::= { pppNcpBmEntryRowStatusTable 1 } PppNcpBmEntryRowStatusEntry ::= SEQUENCE { pppNcpBmEntryRowStatus RowStatus, pppNcpBmEntryComponentName DisplayString, pppNcpBmEntryStorageType StorageType, pppNcpBmEntryMacTypeIndex INTEGER } pppNcpBmEntryRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of pppNcpBmEntry components. These components cannot be added nor deleted." ::= { pppNcpBmEntryRowStatusEntry 1 } pppNcpBmEntryComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppNcpBmEntryRowStatusEntry 2 } pppNcpBmEntryStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the pppNcpBmEntry tables." ::= { pppNcpBmEntryRowStatusEntry 4 } pppNcpBmEntryMacTypeIndex OBJECT-TYPE SYNTAX INTEGER { ethernet(1), tokenBus(2), tokenRing(3), fddi(4) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the pppNcpBmEntry tables." ::= { pppNcpBmEntryRowStatusEntry 10 } pppNcpBmEntryOperTable OBJECT-TYPE SYNTAX SEQUENCE OF PppNcpBmEntryOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the attributes for one entry in the BridgeMediaEntry table." ::= { pppNcpBmEntry 10 } pppNcpBmEntryOperEntry OBJECT-TYPE SYNTAX PppNcpBmEntryOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppNcpBmEntryOperTable." INDEX { pppIndex, pppNcpIndex, pppNcpBmEntryMacTypeIndex } ::= { pppNcpBmEntryOperTable 1 } PppNcpBmEntryOperEntry ::= SEQUENCE { pppNcpBmEntryLocalStatus INTEGER, pppNcpBmEntryRemoteStatus INTEGER } pppNcpBmEntryLocalStatus OBJECT-TYPE SYNTAX INTEGER { accept(1), dontAccept(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the local Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A value of accept indicates that packets of this protocol type will be accepted. A value of dontAccept indicates that packets of this type will not be accepted." ::= { pppNcpBmEntryOperEntry 2 } pppNcpBmEntryRemoteStatus OBJECT-TYPE SYNTAX INTEGER { accept(1), dontAccept(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether the remote Ppp bridging entity will accept packets of the protocol type identified by the instance value of this component. A value of accept indicates that packets of this protocol type will be accepted. A value of dontAccept indicates that packets of this type will not be accepted." ::= { pppNcpBmEntryOperEntry 3 } -- -- Ppp/n Framer -- -- The Framer component controls link layer framing for application -- components sending and receiving data on a link interface. It is also -- through Framer, that an application component is associated with a -- specific hardware link interface. -- -- The Framer component provides provisionable attributes related to -- datapath aspects of the hardware interface (such as crc and frame length) -- rather than interface specific attributes (such as modem leads and -- clocking) which are associated with specific hardware components (such -- as V35/n or DS1/n). The Framer component also provides a -- provisionable attribute which binds the application component to a -- specific hardware component. -- -- The Framer component contains operational attributes for link interface -- datapath statistics (such as frame counts and aborts). -- pppFramer OBJECT IDENTIFIER ::= { ppp 5 } pppFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of pppFramer components." ::= { pppFramer 1 } pppFramerRowStatusEntry OBJECT-TYPE SYNTAX PppFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single pppFramer component." INDEX { pppIndex, pppFramerIndex } ::= { pppFramerRowStatusTable 1 } PppFramerRowStatusEntry ::= SEQUENCE { pppFramerRowStatus RowStatus, pppFramerComponentName DisplayString, pppFramerStorageType StorageType, pppFramerIndex NonReplicated } pppFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of pppFramer components. These components cannot be added nor deleted." ::= { pppFramerRowStatusEntry 1 } pppFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppFramerRowStatusEntry 2 } pppFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the pppFramer tables." ::= { pppFramerRowStatusEntry 4 } pppFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the pppFramer tables." ::= { pppFramerRowStatusEntry 10 } pppFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF PppFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups." ::= { pppFramer 10 } pppFramerProvEntry OBJECT-TYPE SYNTAX PppFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppFramerProvTable." INDEX { pppIndex, pppFramerIndex } ::= { pppFramerProvTable 1 } PppFramerProvEntry ::= SEQUENCE { pppFramerInterfaceName Link } pppFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the logical processor on which Framer's parent component (as well as Framer itself) will run." ::= { pppFramerProvEntry 1 } pppFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF PppFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { pppFramer 12 } pppFramerStateEntry OBJECT-TYPE SYNTAX PppFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppFramerStateTable." INDEX { pppIndex, pppFramerIndex } ::= { pppFramerStateTable 1 } PppFramerStateEntry ::= SEQUENCE { pppFramerAdminState INTEGER, pppFramerOperationalState INTEGER, pppFramerUsageState INTEGER } pppFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { pppFramerStateEntry 1 } pppFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { pppFramerStateEntry 2 } pppFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { pppFramerStateEntry 3 } pppFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PppFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a Framer component." ::= { pppFramer 13 } pppFramerStatsEntry OBJECT-TYPE SYNTAX PppFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppFramerStatsTable." INDEX { pppIndex, pppFramerIndex } ::= { pppFramerStatsTable 1 } PppFramerStatsEntry ::= SEQUENCE { pppFramerFrmToIf Counter32, pppFramerFrmFromIf Counter32, pppFramerAborts Counter32, pppFramerCrcErrors Counter32, pppFramerLrcErrors Counter32, pppFramerNonOctetErrors Counter32, pppFramerOverruns Counter32, pppFramerUnderruns Counter32, pppFramerLargeFrmErrors Counter32 } pppFramerFrmToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component." ::= { pppFramerStatsEntry 1 } pppFramerFrmFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the link interface by Framer." ::= { pppFramerStatsEntry 2 } pppFramerAborts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of aborts received." ::= { pppFramerStatsEntry 3 } pppFramerCrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with CRC errors." ::= { pppFramerStatsEntry 4 } pppFramerLrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames with LRC errors." ::= { pppFramerStatsEntry 5 } pppFramerNonOctetErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames that were non octet aligned." ::= { pppFramerStatsEntry 6 } pppFramerOverruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received from the link for which overruns occurred." ::= { pppFramerStatsEntry 7 } pppFramerUnderruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames transmitted to the link for which underruns occurred." ::= { pppFramerStatsEntry 8 } pppFramerLargeFrmErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit." ::= { pppFramerStatsEntry 9 } pppFramerUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF PppFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the link utilizaiton operational data for a Framer component." ::= { pppFramer 14 } pppFramerUtilEntry OBJECT-TYPE SYNTAX PppFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppFramerUtilTable." INDEX { pppIndex, pppFramerIndex } ::= { pppFramerUtilTable 1 } PppFramerUtilEntry ::= SEQUENCE { pppFramerNormPrioLinkUtilToIf Gauge32, pppFramerNormPrioLinkUtilFromIf Gauge32 } pppFramerNormPrioLinkUtilToIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal priority data sent to the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute." DEFVAL { 0 } ::= { pppFramerUtilEntry 1 } pppFramerNormPrioLinkUtilFromIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal priority data received from the link as a percentage of the available bandwidth on the link. The utilization is the average for the last minute." DEFVAL { 0 } ::= { pppFramerUtilEntry 3 } -- Ppp/n LinkEmissionQueue -- This component provides a means of statistics gathering and packet -- discard. pppLeq OBJECT IDENTIFIER ::= { ppp 6 } pppLeqRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLeqRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of pppLeq components." ::= { pppLeq 1 } pppLeqRowStatusEntry OBJECT-TYPE SYNTAX PppLeqRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single pppLeq component." INDEX { pppIndex, pppLeqIndex } ::= { pppLeqRowStatusTable 1 } PppLeqRowStatusEntry ::= SEQUENCE { pppLeqRowStatus RowStatus, pppLeqComponentName DisplayString, pppLeqStorageType StorageType, pppLeqIndex NonReplicated } pppLeqRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of pppLeq components. These components can be added and deleted." ::= { pppLeqRowStatusEntry 1 } pppLeqComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { pppLeqRowStatusEntry 2 } pppLeqStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the pppLeq tables." ::= { pppLeqRowStatusEntry 4 } pppLeqIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the pppLeq tables." ::= { pppLeqRowStatusEntry 10 } pppLeqProvTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLeqProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the LinkEmissionQueue component." ::= { pppLeq 10 } pppLeqProvEntry OBJECT-TYPE SYNTAX PppLeqProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLeqProvTable." INDEX { pppIndex, pppLeqIndex } ::= { pppLeqProvTable 1 } PppLeqProvEntry ::= SEQUENCE { pppLeqMaxPackets Unsigned32, pppLeqMaxMsecData Unsigned32, pppLeqMaxPercentMulticast Unsigned32, pppLeqTimeToLive Unsigned32 } pppLeqMaxPackets OBJECT-TYPE SYNTAX Unsigned32 (0..2048) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of packets allowed in the Leq before being discarded. If this attribute is set to zero then the maximum number of packets is calculated from the transmit data rate. This calculated value is placed in queuePktThreshold." DEFVAL { 0 } ::= { pppLeqProvEntry 1 } pppLeqMaxMsecData OBJECT-TYPE SYNTAX Unsigned32 (100..60000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of 'Milliseconds worth of data' allowed in the Leq before packets are discarded. The queueByteThreshold will be calculated from this attribute, based on the transmit data rate." DEFVAL { 10000 } ::= { pppLeqProvEntry 2 } pppLeqMaxPercentMulticast OBJECT-TYPE SYNTAX Unsigned32 (1..100) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum percentage of multicast packets allowed in the Leq, based on queuePktThreshold, before being discarded. The calculated value will be placed in queueMulticastThreshold." DEFVAL { 50 } ::= { pppLeqProvEntry 3 } pppLeqTimeToLive OBJECT-TYPE SYNTAX Unsigned32 (100..60000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the 'Milliseconds Time To Live' of packets in the Leq. If the timeToLive of a packet expires, it will be discarded." DEFVAL { 10000 } ::= { pppLeqProvEntry 4 } pppLeqStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLeqStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue general statistics." ::= { pppLeq 11 } pppLeqStatsEntry OBJECT-TYPE SYNTAX PppLeqStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLeqStatsTable." INDEX { pppIndex, pppLeqIndex } ::= { pppLeqStatsTable 1 } PppLeqStatsEntry ::= SEQUENCE { pppLeqTimedOutPkt Counter32, pppLeqHardwareForcedPkt Counter32, pppLeqForcedPktDiscards Counter32, pppLeqQueuePurgeDiscards Counter32 } pppLeqTimedOutPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets that have been discarded due to exceeding the timeToLive. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqStatsEntry 1 } pppLeqHardwareForcedPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of hardware forced packets on this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqStatsEntry 2 } pppLeqForcedPktDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of hardware forced packets that had to be discarded due to link failure. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqStatsEntry 4 } pppLeqQueuePurgeDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets discarded by a queue purge (i.e. a discarding of all packets on the queue). This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqStatsEntry 5 } pppLeqTStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLeqTStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue total statistics." ::= { pppLeq 12 } pppLeqTStatsEntry OBJECT-TYPE SYNTAX PppLeqTStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLeqTStatsTable." INDEX { pppIndex, pppLeqIndex } ::= { pppLeqTStatsTable 1 } PppLeqTStatsEntry ::= SEQUENCE { pppLeqTotalPktHandled Counter32, pppLeqTotalPktForwarded Counter32, pppLeqTotalPktQueued Counter32, pppLeqTotalMulticastPkt Counter32, pppLeqTotalPktDiscards Counter32 } pppLeqTotalPktHandled OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets handled by the Leq. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqTStatsEntry 1 } pppLeqTotalPktForwarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets forwarded by the Leq. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqTStatsEntry 2 } pppLeqTotalPktQueued OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets that required queuing by the Leq due to transmit congestion. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqTStatsEntry 3 } pppLeqTotalMulticastPkt OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of multicast packets handled by this instance of Ppp. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqTStatsEntry 4 } pppLeqTotalPktDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets that were discarded for this instance of Ppp. This is the sum of timedOutPkt, forcedPktDiscards, queuePurgeDiscards, pktThresholdExceeded, byteThresholdExceeded, mulThresholdExceeded, and memThresholdExceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqTStatsEntry 8 } pppLeqCStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLeqCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue current statistics." ::= { pppLeq 13 } pppLeqCStatsEntry OBJECT-TYPE SYNTAX PppLeqCStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLeqCStatsTable." INDEX { pppIndex, pppLeqIndex } ::= { pppLeqCStatsTable 1 } PppLeqCStatsEntry ::= SEQUENCE { pppLeqCurrentPktQueued Gauge32, pppLeqCurrentBytesQueued Gauge32, pppLeqCurrentMulticastQueued Gauge32 } pppLeqCurrentPktQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the current number of packets queued." DEFVAL { 0 } ::= { pppLeqCStatsEntry 1 } pppLeqCurrentBytesQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the current number of bytes queued." DEFVAL { 0 } ::= { pppLeqCStatsEntry 2 } pppLeqCurrentMulticastQueued OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the current number of multicast packets in the queue." DEFVAL { 0 } ::= { pppLeqCStatsEntry 3 } pppLeqThrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF PppLeqThrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains Link Emission Queue threshold statistics." ::= { pppLeq 14 } pppLeqThrStatsEntry OBJECT-TYPE SYNTAX PppLeqThrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the pppLeqThrStatsTable." INDEX { pppIndex, pppLeqIndex } ::= { pppLeqThrStatsTable 1 } PppLeqThrStatsEntry ::= SEQUENCE { pppLeqQueuePktThreshold Unsigned32, pppLeqPktThresholdExceeded Counter32, pppLeqQueueByteThreshold Unsigned32, pppLeqByteThresholdExceeded Counter32, pppLeqQueueMulticastThreshold Unsigned32, pppLeqMulThresholdExceeded Counter32, pppLeqMemThresholdExceeded Counter32 } pppLeqQueuePktThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the maximum number of packets that can be contained in the queue before being discarded. If maxPackets was set to 0 then this attribute will contain the value that has been calculated based on the transmit data rate. If maxPackets was set to one or more than this attribute will contain that number." DEFVAL { 0 } ::= { pppLeqThrStatsEntry 1 } pppLeqPktThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queuePktThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqThrStatsEntry 2 } pppLeqQueueByteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the maximum number of bytes allowed in the queue based on maxMsecData and the transmit data rate." DEFVAL { 0 } ::= { pppLeqThrStatsEntry 3 } pppLeqByteThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queueByteThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqThrStatsEntry 4 } pppLeqQueueMulticastThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the number of multicast packets allowed in the queue based on maxPercentMulticast and maxPackets." DEFVAL { 0 } ::= { pppLeqThrStatsEntry 5 } pppLeqMulThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to the queueMulticastThreshold being exceeded. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqThrStatsEntry 6 } pppLeqMemThresholdExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets discarded due to exceeding the memory usage threshold for Leq. The memory usage threshold is determined by the Leq software, guaranteeing that the Leq does not consume all of the memory. This counter will wrap around to 0 when it exceeds its maximum count." ::= { pppLeqThrStatsEntry 7 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { pppNcpBOperState, -- pppOperationalState, -- pppNcpIpxOperState, -- pppLnkTransmitFcsSize, -- pppNcpStorageType, -- pppFramerLrcErrors, -- pppLeqTotalPktHandled, -- pppLeqMemThresholdExceeded, -- pppLqmComponentName, -- pppLinkToProtocolPort, -- pppLeqComponentName, -- pppLnkConfigureRequestTries, -- pppLnkQualityWindow, -- pppLnkStorageType, -- pppLeqQueuePurgeDiscards, -- pppLqmStorageType, -- pppNcpBConfigTinygram, -- pppRowStatus, -- pppLqmLocalPeriod, -- pppLeqTotalPktForwarded, -- pppLeqCurrentPktQueued, -- pppLeqTotalPktDiscards, -- pppNcpBmcEntryStorageType, -- pppNcpBmEntryLocalStatus, -- pppNcpAppletalkOperState, -- pppNcpBLocalToRemoteTinygramComp, -- pppLqmConfigStatus, -- pppNcpBmcEntryLocalStatus, -- pppLqmRemotePeriod, -- pppFramerOverruns, -- pppLnkReceiveFcsSize, -- pppLeqTimeToLive, -- pppLeqCurrentMulticastQueued, -- pppNcpBmEntryComponentName, -- pppLnkQualityThreshold, -- pppNcpBmcEntryComponentName, -- pppNcpBConfigLanId, -- pppLeqTotalMulticastPkt, -- pppLeqQueueByteThreshold, -- pppLqmInGoodOctets, -- pppAdminState, -- pppLeqMulThresholdExceeded, -- pppFramerComponentName, -- pppNcpXnsOperState, -- pppLeqRowStatus, -- pppLeqMaxMsecData, -- pppLnkLocalMru, -- pppFramerFrmToIf, -- pppLnkComponentName, -- pppFramerUnderruns, -- pppLeqQueueMulticastThreshold, -- pppLqmRowStatus, -- pppLqmOutLqrs, -- pppComponentName, -- pppLeqMaxPackets, -- pppNcpIpOperState, -- pppLnkConfigMagicNumber, -- pppLeqMaxPercentMulticast, -- pppLqmQuality, -- pppNcpBmEntryStorageType, -- pppLnkTerminateRequestTries, -- pppLnkContinuityMonitor, -- pppLeqHardwareForcedPkt, -- pppLnkOperState, -- pppNcpDecnetOperState, -- pppLeqByteThresholdExceeded, -- pppLnkNegativeAckTries, -- pppSnmpOperStatus, -- pppIfIndex, -- pppFramerNormPrioLinkUtilToIf, -- pppLeqForcedPktDiscards, -- pppFramerFrmFromIf, -- pppLnkBadAddresses, -- pppFramerStorageType, -- pppNcpBmEntryRowStatus, -- pppLqmInLqrs, -- pppFramerCrcErrors, -- pppStorageType, -- pppLeqTimedOutPkt, -- pppNcpBmcEntryRowStatus, -- pppNcpComponentName, -- pppFramerAborts, -- pppNcpBLocalToRemoteLanId, -- pppFramerAdminState, -- pppLnkConfigInitialMru, -- pppLnkBadControls, -- pppNcpBRemoteToLocalLanId, -- pppLnkLineCondition, -- pppFramerRowStatus, -- pppLqmConfigPeriod, -- pppFramerLargeFrmErrors, -- pppLnkPacketTooLongs, -- pppNcpRowStatus, -- pppIfAdminStatus, -- pppLnkRowStatus, -- pppLnkRestartTimer, -- pppCustomerIdentifier, -- pppLeqPktThresholdExceeded, -- pppFramerNonOctetErrors, -- pppFramerUsageState, -- pppFramerNormPrioLinkUtilFromIf, -- pppLeqCurrentBytesQueued, -- pppUsageState, -- pppLnkBadFcss, -- pppLnkRemoteMru, -- pppFramerInterfaceName, -- pppLeqStorageType, -- pppLeqTotalPktQueued, -- pppLeqQueuePktThreshold, -- pppNcpBmEntryRemoteStatus, -- pppNcpBRemoteToLocalTinygramComp, -- pppFramerOperationalState } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." pppGroup OBJECT IDENTIFIER ::= { pppMIB 1 } pppGroupBC OBJECT IDENTIFIER ::= { pppGroup 3 } pppGroupBC02 OBJECT IDENTIFIER ::= { pppGroupBC 3 } pppGroupBC02A OBJECT IDENTIFIER ::= { pppGroupBC02 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 Ppp." -- STATUS mandatory -- DESCRIPTION "Ppp MIB: MIB Version BC02A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-PppMIB -- INCLUDES { pppGroupBC02A } -- rfc1471 (Link Control Protocol of the Point-to-Point Protocol) -- -- SUPPORTS RFC1471-MIB -- INCLUDES { pppLinkStatusTable, pppLinkConfigTable, pppLqrTable, -- pppLqrConfigTable } -- pppLqrExtnsTable, pppEchoTest, and -- pppDiscardTest are not supported. -- -- variations for pppLinkConfigTable -- -- VARIATION pppLinkConfigInitialMRU -- SYNTAX INTEGER (68..18000) -- DEFVAL { 18000 } -- DESCRIPTION "Packets smaller than 68 bytes or larger than 18000 -- bytes can not be supported. This implementation -- will default the pppLinkConfigInitialMRU to 18000." -- -- VARIATION pppLinkConfigReceiveACCMap -- DEFVAL { '00000000'h } -- DESCRIPTION "ACC map is not supported by this implementation." -- -- -- VARIATION pppLinkConfigTransmitACCMap -- DEFVAL { '00000000'h } -- DESCRIPTION "ACC map is not supported by this implementation." -- -- VARIATION pppLinkConfigMagicNumber -- DEFVAL { true } -- DESCRIPTION "This implementation will default -- pppLinkConfigMagicNumber to true." -- -- VARIATION pppLinkConfigFcsSize -- SYNTAX INTEGER (16) -- DESCRIPTION "Only 16 bit crc is supported by this implementation." -- -- variations for pppLqrConfigTable -- -- VARIATION pppLqrConfigStatus -- DEFVAL { disabled } -- DESCRIPTION "This implementation will default pppLqrConfigStatus -- to disabled." -- -- -- rfc1472 (Security Protocols of the Point-to-Point Protocol are -- not supported) -- -- rfc1473 (IP Network Control Protocol of the Point-to-Point Protocol) -- -- SUPPORTS RFC1473-MIB -- INCLUDES { pppIpTable, pppIpConfigTable } -- -- variations for pppIpConfigTable -- -- VARIATION pppIpConfigCompression -- WRITE-SYNTAX INTEGER { none(1) } -- DESCRIPTION "No IP compression is supported by this implementation." -- -- -- -- rfc1474 (Bridge Network Control Protocol of the Point-to-Point Protocol) -- -- SUPPORTS RFC1474-MIB -- INCLUDES { pppBridgeTable, pppBridgeConfigTable, -- pppBridgeMediaTable, pppBridgeMediaConfigTable } -- -- variations for pppBridgeConfigTable -- -- VARIATION pppBridgeConfigRingId -- WRITE-SYNTAX INTEGER { false(1) } -- DESCRIPTION "Remote Ring Identification Option negotiation is not -- supported by this implementation." -- -- VARIATION pppBridgeConfigLineId -- WRITE-SYNTAX INTEGER { false(1) } -- DESCRIPTION "Line Identification Option negotiation is not -- supported by this implementation." -- -- VARIATION pppBridgeConfigLanId -- DEFVAL { true } -- DESCRIPTION "This implementation will initiate negotiation of this -- option by default." -- -- variations for pppBridgeMediaConfigTable -- -- VARIATION pppBridgeMediaConfigMacType -- ACCESS read-only -- DESCRIPTION "This implementation does not allow writes to the -- pppBridgeMediaConfigMacType." -- -- VARIATION pppBridgeMediaConfigLocalStatus -- WRITE-SYNTAX INTEGER { accept(1) } -- DESCRIPTION "This implementation does not allow packets to be -- selectively accepted based on Mac type." -- pppCapabilities OBJECT IDENTIFIER ::= { pppMIB 3 } pppCapabilitiesBC OBJECT IDENTIFIER ::= { pppCapabilities 3 } pppCapabilitiesBC02 OBJECT IDENTIFIER ::= { pppCapabilitiesBC 3 } pppCapabilitiesBC02A OBJECT IDENTIFIER ::= { pppCapabilitiesBC02 2 } END