Nortel-Magellan-Passport-MpaNetworkLinkMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, RowPointer, DisplayString, StorageType, RowStatus, PassportCounter64, InterfaceIndex, Gauge32, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, Hex, NonReplicated, HexString, EnterpriseDateAndTime, Link, DigitString, Unsigned64 FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9902010000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- MpaNetworkLink Enterprise MIB." mpaNetworkLinkMIB OBJECT IDENTIFIER ::= { passportMIBs 119 } -- MpaNetworkLink/ -- This component defines an instance of the MPA Network Link -- (MPANL) service. The component instance value n is a unique -- positive integer within a module. mpanl OBJECT IDENTIFIER ::= { components 123 } mpanlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanl components." ::= { mpanl 1 } mpanlRowStatusEntry OBJECT-TYPE SYNTAX MpanlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanl component." INDEX { mpanlIndex } ::= { mpanlRowStatusTable 1 } MpanlRowStatusEntry ::= SEQUENCE { mpanlRowStatus RowStatus, mpanlComponentName DisplayString, mpanlStorageType StorageType, mpanlIndex Integer32 } mpanlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanl components. These components can be added and deleted." ::= { mpanlRowStatusEntry 1 } mpanlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlRowStatusEntry 2 } mpanlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanl tables." ::= { mpanlRowStatusEntry 4 } mpanlIndex OBJECT-TYPE SYNTAX Integer32 (1..65535) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanl tables." ::= { mpanlRowStatusEntry 10 } mpanlCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for the MPANL component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { mpanl 10 } mpanlCidDataEntry OBJECT-TYPE SYNTAX MpanlCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlCidDataTable." INDEX { mpanlIndex } ::= { mpanlCidDataTable 1 } MpanlCidDataEntry ::= SEQUENCE { mpanlCustomerIdentifier Unsigned32 } mpanlCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { mpanlCidDataEntry 1 } mpanlProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes of the MPANL service." ::= { mpanl 12 } mpanlProvEntry OBJECT-TYPE SYNTAX MpanlProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlProvTable." INDEX { mpanlIndex } ::= { mpanlProvTable 1 } MpanlProvEntry ::= SEQUENCE { mpanlCommentText AsciiString } mpanlCommentText OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the name the customer wishes to associate with this MPANL interface." ::= { mpanlProvEntry 1 } mpanlEmissionPriorityQsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlEmissionPriorityQsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attribute to specifie the number of Frame Relay egress emission priority queues to be used on that Frame Relay Interface" ::= { mpanl 13 } mpanlEmissionPriorityQsEntry OBJECT-TYPE SYNTAX MpanlEmissionPriorityQsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlEmissionPriorityQsTable." INDEX { mpanlIndex } ::= { mpanlEmissionPriorityQsTable 1 } MpanlEmissionPriorityQsEntry ::= SEQUENCE { mpanlNumberOfEmissionQs Unsigned32 } mpanlNumberOfEmissionQs OBJECT-TYPE SYNTAX Unsigned32 (2 | 4) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the number of egress emission priority queues that will be used for that Frame Relay interface. The possible values of this attribute are 2 or 4: For V.35, V.11, HSSI, E1, DS1, E3, DS3 or 8pDS1 the possible values are: 2 (in which case they are hardware queues), or 4 (in which case they are software queues). For DS1C, E1C or DS3C the possible values are 2, 4 (in all cases they are software queues)." DEFVAL { 4 } ::= { mpanlEmissionPriorityQsEntry 1 } mpanlStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide." ::= { mpanl 14 } mpanlStateEntry OBJECT-TYPE SYNTAX MpanlStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlStateTable." INDEX { mpanlIndex } ::= { mpanlStateTable 1 } MpanlStateEntry ::= SEQUENCE { mpanlAdminState INTEGER, mpanlOperationalState INTEGER, mpanlUsageState INTEGER, mpanlAvailabilityStatus OCTET STRING, mpanlProceduralStatus OCTET STRING, mpanlControlStatus OCTET STRING, mpanlAlarmStatus OCTET STRING, mpanlStandbyStatus INTEGER, mpanlUnknownStatus INTEGER } mpanlAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { unlocked } ::= { mpanlStateEntry 1 } mpanlOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { disabled } ::= { mpanlStateEntry 2 } mpanlUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { idle } ::= { mpanlStateEntry 3 } mpanlAvailabilityStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)" ::= { mpanlStateEntry 4 } mpanlProceduralStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)" ::= { mpanlStateEntry 5 } mpanlControlStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)" ::= { mpanlStateEntry 6 } mpanlAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)" ::= { mpanlStateEntry 7 } mpanlStandbyStatus OBJECT-TYPE SYNTAX INTEGER { hotStandby(0), coldStandby(1), providingService(2), notSet(15) } ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource." DEFVAL { notSet } ::= { mpanlStateEntry 8 } mpanlUnknownStatus OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure." DEFVAL { false } ::= { mpanlStateEntry 9 } mpanlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "FrUni/n Statistics This group contains the statistics about the operational behavior of the service at the interface level." ::= { mpanl 16 } mpanlStatsEntry OBJECT-TYPE SYNTAX MpanlStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlStatsTable." INDEX { mpanlIndex } ::= { mpanlStatsTable 1 } MpanlStatsEntry ::= SEQUENCE { mpanlLastUnknownDlci Unsigned32, mpanlUnknownDlciFramesFromIf Counter32, mpanlInvalidHeaderFramesFromIf Counter32 } mpanlLastUnknownDlci OBJECT-TYPE SYNTAX Unsigned32 (0..1023) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute identifies the most recent DLCI which user frames were received on for which a DLCI has not been provisioned on the port." DEFVAL { 0 } ::= { mpanlStatsEntry 1 } mpanlUnknownDlciFramesFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains a count of the number of frames received from the interface with an unknown DLCI (DLCI which is not provisioned). When the maximum is reached the count wraps to zero." ::= { mpanlStatsEntry 2 } mpanlInvalidHeaderFramesFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames received from the interface with an invalid header format. When the maximum is reached the count wraps to zero." ::= { mpanlStatsEntry 3 } mpanlTrafficStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlTrafficStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This operational group provides the traffic statistics of the service at the interface level. Each attribute type is a non-negative integer which monotonically increases until it reaches a maximum value, at which point it wraps around and starts increasing again from zero." ::= { mpanl 17 } mpanlTrafficStatsEntry OBJECT-TYPE SYNTAX MpanlTrafficStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlTrafficStatsTable." INDEX { mpanlIndex } ::= { mpanlTrafficStatsTable 1 } MpanlTrafficStatsEntry ::= SEQUENCE { mpanlFrmToIf Unsigned32, mpanlOctetToIf Unsigned32, mpanlFrmFromIf Unsigned32, mpanlOctetFromIf Unsigned32 } mpanlFrmToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts frames transmitted to the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero." ::= { mpanlTrafficStatsEntry 1 } mpanlOctetToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts octets transmitted to the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero." ::= { mpanlTrafficStatsEntry 2 } mpanlFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts frames received from the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero." ::= { mpanlTrafficStatsEntry 3 } mpanlOctetFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts octets received from the interface. This count may differ from its framer couterpart because Voice over Frame Relay function may fragment and pack the Frame Relay frames before transmission. When the maximum is reached the count wraps to zero." ::= { mpanlTrafficStatsEntry 4 } mpanlIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { mpanl 23 } mpanlIfEntryEntry OBJECT-TYPE SYNTAX MpanlIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlIfEntryTable." INDEX { mpanlIndex } ::= { mpanlIfEntryTable 1 } MpanlIfEntryEntry ::= SEQUENCE { mpanlIfAdminStatus INTEGER, mpanlIfIndex InterfaceIndex } mpanlIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mpanlIfEntryEntry 1 } mpanlIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { mpanlIfEntryEntry 2 } mpanlOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { mpanl 24 } mpanlOperStatusEntry OBJECT-TYPE SYNTAX MpanlOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlOperStatusTable." INDEX { mpanlIndex } ::= { mpanlOperStatusTable 1 } MpanlOperStatusEntry ::= SEQUENCE { mpanlSnmpOperStatus INTEGER } mpanlSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { mpanlOperStatusEntry 1 } mpanlOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains miscelleneous operational attributes of the MPANL service." ::= { mpanl 25 } mpanlOperEntry OBJECT-TYPE SYNTAX MpanlOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlOperTable." INDEX { mpanlIndex } ::= { mpanlOperTable 1 } MpanlOperEntry ::= SEQUENCE { mpanlRoundTripDelay Unsigned32 } mpanlRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 (0..10000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the round trip delay of the MPANL interface. The round trip delay measurement is only made when this attribute is displayed. The measured value is rounded up to the next millisecond. This attribute has the value 0, if the delay measurement cannot be made." ::= { mpanlOperEntry 1 } mpanlFrmToIfByQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFrmToIfByQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the total number of frames transmitted to the interface per egress emission priority queue since the component has been activated. There is potentially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority." ::= { mpanl 350 } mpanlFrmToIfByQueueEntry OBJECT-TYPE SYNTAX MpanlFrmToIfByQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFrmToIfByQueueTable." INDEX { mpanlIndex, mpanlFrmToIfByQueueIndex } ::= { mpanlFrmToIfByQueueTable 1 } MpanlFrmToIfByQueueEntry ::= SEQUENCE { mpanlFrmToIfByQueueIndex Integer32, mpanlFrmToIfByQueueValue Unsigned32 } mpanlFrmToIfByQueueIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlFrmToIfByQueueTable." ::= { mpanlFrmToIfByQueueEntry 1 } mpanlFrmToIfByQueueValue OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the mpanlFrmToIfByQueueTable." ::= { mpanlFrmToIfByQueueEntry 2 } mpanlOctetToIfByQueueTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlOctetToIfByQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute counts the total number of octets transmitted from the service to the interface per emission priority queue since the component has been activated. There is potentially a maximum of 4 emission priority queues. The number of available egress queues varies according to the value of the provisionable attribute numberOfEmissionQs. Egress queue 0 has the lowest priority, while egress queue 3 has the highest priority." ::= { mpanl 351 } mpanlOctetToIfByQueueEntry OBJECT-TYPE SYNTAX MpanlOctetToIfByQueueEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlOctetToIfByQueueTable." INDEX { mpanlIndex, mpanlOctetToIfByQueueIndex } ::= { mpanlOctetToIfByQueueTable 1 } MpanlOctetToIfByQueueEntry ::= SEQUENCE { mpanlOctetToIfByQueueIndex Integer32, mpanlOctetToIfByQueueValue Unsigned32 } mpanlOctetToIfByQueueIndex OBJECT-TYPE SYNTAX Integer32 (0..3) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlOctetToIfByQueueTable." ::= { mpanlOctetToIfByQueueEntry 1 } mpanlOctetToIfByQueueValue OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents an individual value for the mpanlOctetToIfByQueueTable." ::= { mpanlOctetToIfByQueueEntry 2 } -- Mpanl/ DataNetworkAddress -- This component contains the attributes necessary for creating a -- virtual circuit. These attributes indicate the default call setup -- capabilities for the interface. mpanlDna OBJECT IDENTIFIER ::= { mpanl 2 } mpanlDnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlDna components." ::= { mpanlDna 1 } mpanlDnaRowStatusEntry OBJECT-TYPE SYNTAX MpanlDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlDna component." INDEX { mpanlIndex, mpanlDnaIndex } ::= { mpanlDnaRowStatusTable 1 } MpanlDnaRowStatusEntry ::= SEQUENCE { mpanlDnaRowStatus RowStatus, mpanlDnaComponentName DisplayString, mpanlDnaStorageType StorageType, mpanlDnaIndex NonReplicated } mpanlDnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlDna components. These components cannot be added nor deleted." ::= { mpanlDnaRowStatusEntry 1 } mpanlDnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlDnaRowStatusEntry 2 } mpanlDnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlDna tables." ::= { mpanlDnaRowStatusEntry 4 } mpanlDnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlDna tables." ::= { mpanlDnaRowStatusEntry 10 } mpanlDnaOutgoingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DnaOutOptionsProv group defines call options of a Dna for calls which are made out of the interface represented by Dna. All these options are not used for calls arriving to the interface represented by Dna." ::= { mpanlDna 11 } mpanlDnaOutgoingOptionsEntry OBJECT-TYPE SYNTAX MpanlDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDnaOutgoingOptionsTable." INDEX { mpanlIndex, mpanlDnaIndex } ::= { mpanlDnaOutgoingOptionsTable 1 } MpanlDnaOutgoingOptionsEntry ::= SEQUENCE { mpanlDnaDefaultTransferPriority INTEGER } mpanlDnaDefaultTransferPriority OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the default transfer priority to network for all outgoing calls using this particular Dna. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 levels from 0 to 15. Each transfer priority n, where n indicates the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required. The default defaultTransferPriority is 0." DEFVAL { n0 } ::= { mpanlDnaOutgoingOptionsEntry 18 } mpanlDnaCallOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "DnaCallOptions group defines additional options for calls not related directly to direction of a call." ::= { mpanlDna 13 } mpanlDnaCallOptionsEntry OBJECT-TYPE SYNTAX MpanlDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDnaCallOptionsTable." INDEX { mpanlIndex, mpanlDnaIndex } ::= { mpanlDnaCallOptionsTable 1 } MpanlDnaCallOptionsEntry ::= SEQUENCE { mpanlDnaAccountClass Unsigned32, mpanlDnaAccountCollection OCTET STRING, mpanlDnaServiceExchange Unsigned32, mpanlDnaEgressAccounting INTEGER } mpanlDnaAccountClass OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the accounting class which is reserved for network operations usage. Its value is returned in the accounting record in the local and remote service type attributes. Use of this attribute is decided by network operator. This attribute is returned by the local VC in the accounting record for all calls setup using this particular DNA." DEFVAL { 0 } ::= { mpanlDnaCallOptionsEntry 10 } mpanlDnaAccountCollection OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This set attribute indicates that accounting records are to be collected by the network for the various reasons: billing, test, study, auditing. The last of the parameters, force, indicates that accounting records are to be collected irrespective of other collection reasons. The force option is available for X.75 Gateways only. If none of these reasons are set, then accounting will be suppressed. To set a specific accounting collection reason, the reason is entered and the corresponding bit in the structure is set to a value of 1. To turn off a specific accounting collection reason, the reason is entered preceeded with the '^' character, and the corresponding bit in the structure is set to a value of 0. The bit placement for the accounting collection reasons is as follows: Bit 0 - Bill Bit 1 - Test Bit 2 - Study Bit 3 - Audit Bit 4 - Force Description of bits: bill(0) test(1) study(2) audit(3) force(4)" DEFVAL { '80'H } ::= { mpanlDnaCallOptionsEntry 11 } mpanlDnaServiceExchange OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an arbitrary number, Data Service Exchange, as entered by the network operator and reported in accounting record. It is converted into an internal 8-bit integer value for use in the accounting record as well as in various X.25 and X.75 Tariff utilities." DEFVAL { 0 } ::= { mpanlDnaCallOptionsEntry 12 } mpanlDnaEgressAccounting OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies if Egress accounting is enabled by the MPANL service. Disabling of Egress accounting means that only segment counts are collected by VC and there are no frame relay counts in accounting records for the MPANL service. Enabling of Egress accounting means that the accounting records for MPANL contain frame relay specific counts." DEFVAL { no } ::= { mpanlDnaCallOptionsEntry 13 } -- -- Mpanl/ Framer -- The Framer component controls link layer framing for application -- components sending and receiving data on a link interface. It is also -- through Framer, that an application component is associated with a -- specific hardware link interface. -- -- The Framer component provides provisionable attributes related to -- datapath aspects of the hardware interface (such as crc and frame -- length) rather than interface specific attributes (such as modem -- leads and clocking) which are associated with specific hardware -- components (such as V35/n or DS1/n). The Framer component also -- provides a provisionable attribute which binds the application -- component to a specific hardware component. -- -- The Framer component contains operational attributes for link -- interface datapath statistics (such as frame counts and aborts). -- mpanlFramer OBJECT IDENTIFIER ::= { mpanl 3 } mpanlFramerRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlFramer components." ::= { mpanlFramer 1 } mpanlFramerRowStatusEntry OBJECT-TYPE SYNTAX MpanlFramerRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlFramer component." INDEX { mpanlIndex, mpanlFramerIndex } ::= { mpanlFramerRowStatusTable 1 } MpanlFramerRowStatusEntry ::= SEQUENCE { mpanlFramerRowStatus RowStatus, mpanlFramerComponentName DisplayString, mpanlFramerStorageType StorageType, mpanlFramerIndex NonReplicated } mpanlFramerRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlFramer components. These components can be added and deleted." ::= { mpanlFramerRowStatusEntry 1 } mpanlFramerComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlFramerRowStatusEntry 2 } mpanlFramerStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlFramer tables." ::= { mpanlFramerRowStatusEntry 4 } mpanlFramerIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlFramer tables." ::= { mpanlFramerRowStatusEntry 10 } mpanlFramerProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups." ::= { mpanlFramer 10 } mpanlFramerProvEntry OBJECT-TYPE SYNTAX MpanlFramerProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFramerProvTable." INDEX { mpanlIndex, mpanlFramerIndex } ::= { mpanlFramerProvTable 1 } MpanlFramerProvEntry ::= SEQUENCE { mpanlFramerInterfaceName Link } mpanlFramerInterfaceName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run." ::= { mpanlFramerProvEntry 1 } mpanlFramerLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFramerLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes defining the framing of data on the link interface." ::= { mpanlFramer 11 } mpanlFramerLinkEntry OBJECT-TYPE SYNTAX MpanlFramerLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFramerLinkTable." INDEX { mpanlIndex, mpanlFramerIndex } ::= { mpanlFramerLinkTable 1 } MpanlFramerLinkEntry ::= SEQUENCE { mpanlFramerFlagsBetweenFrames Unsigned32 } mpanlFramerFlagsBetweenFrames OBJECT-TYPE SYNTAX Unsigned32 (1..16) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines the number of flags that are inserted between frames sent to the link interface." DEFVAL { 1 } ::= { mpanlFramerLinkEntry 4 } mpanlFramerStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mpanlFramer 12 } mpanlFramerStateEntry OBJECT-TYPE SYNTAX MpanlFramerStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFramerStateTable." INDEX { mpanlIndex, mpanlFramerIndex } ::= { mpanlFramerStateTable 1 } MpanlFramerStateEntry ::= SEQUENCE { mpanlFramerAdminState INTEGER, mpanlFramerOperationalState INTEGER, mpanlFramerUsageState INTEGER } mpanlFramerAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mpanlFramerStateEntry 1 } mpanlFramerOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mpanlFramerStateEntry 2 } mpanlFramerUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mpanlFramerStateEntry 3 } mpanlFramerStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational statistics data for a Framer component." ::= { mpanlFramer 13 } mpanlFramerStatsEntry OBJECT-TYPE SYNTAX MpanlFramerStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFramerStatsTable." INDEX { mpanlIndex, mpanlFramerIndex } ::= { mpanlFramerStatsTable 1 } MpanlFramerStatsEntry ::= SEQUENCE { mpanlFramerFrmToIf Counter32, mpanlFramerFrmFromIf Counter32, mpanlFramerOctetFromIf Counter32, mpanlFramerAborts Counter32, mpanlFramerCrcErrors Counter32, mpanlFramerLrcErrors Counter32, mpanlFramerNonOctetErrors Counter32, mpanlFramerOverruns Counter32, mpanlFramerUnderruns Counter32, mpanlFramerLargeFrmErrors Counter32, mpanlFramerFrmModeErrors Counter32 } mpanlFramerFrmToIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames transmitted to the link interface by Framer. Note: This does not include the number of frames transmitted directly to the hardware queue, thus bypassing the Framer component." ::= { mpanlFramerStatsEntry 1 } mpanlFramerFrmFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames received from the link interface by Framer." ::= { mpanlFramerStatsEntry 2 } mpanlFramerOctetFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of bytes received from the link interface by Framer." ::= { mpanlFramerStatsEntry 3 } mpanlFramerAborts OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of aborts received." ::= { mpanlFramerStatsEntry 4 } mpanlFramerCrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames with CRC errors, occurring in the receive direction from the link." ::= { mpanlFramerStatsEntry 5 } mpanlFramerLrcErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames with LRC errors, occurring in the Tx link prior to transmission onto the link." ::= { mpanlFramerStatsEntry 6 } mpanlFramerNonOctetErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames that were non octet aligned." ::= { mpanlFramerStatsEntry 7 } mpanlFramerOverruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received from the link for which overruns occurred." ::= { mpanlFramerStatsEntry 8 } mpanlFramerUnderruns OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames transmitted to the link for which underruns occurred." ::= { mpanlFramerStatsEntry 9 } mpanlFramerLargeFrmErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames received which were too large. The frame execeeded the maximumFrameLengthLimit provisioned attribute or it contained more than the 255 block hardware limit." ::= { mpanlFramerStatsEntry 10 } mpanlFramerFrmModeErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the total number of frames detected with framing mode errors. A framingModeError is flagged when frames are inconsistent with the specified framingType, that is when interrupting frames are used while running in hdlc mode." ::= { mpanlFramerStatsEntry 11 } mpanlFramerUtilTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the link utilizaiton operational data for a Framer component." ::= { mpanlFramer 14 } mpanlFramerUtilEntry OBJECT-TYPE SYNTAX MpanlFramerUtilEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFramerUtilTable." INDEX { mpanlIndex, mpanlFramerIndex } ::= { mpanlFramerUtilTable 1 } MpanlFramerUtilEntry ::= SEQUENCE { mpanlFramerNormPrioLinkUtilToIf Gauge32, mpanlFramerNormPrioLinkUtilFromIf Gauge32 } mpanlFramerNormPrioLinkUtilToIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) sent to the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute." DEFVAL { 0 } ::= { mpanlFramerUtilEntry 1 } mpanlFramerNormPrioLinkUtilFromIf OBJECT-TYPE SYNTAX Gauge32 (0..100) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the utilization of the normal and high priority data traffic (interruptable traffic) received from the link as a percentage of the available bandwidth on the link. Note that this includes traffic with Transfer Priorities (TP) of 0, 6 and 9 and/or Emission Priority of 2 and 3. The utilization is the average for the last minute." DEFVAL { 0 } ::= { mpanlFramerUtilEntry 3 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Mpanl/ PrefixDataNetworkAddress/, -- This component identifies a prefixDNA provided by the MPA DTE -- via the the MPANL protocol. It has no attributes because all of the -- relevant information is contained in the indices of this component. -- The first index is the numbering plan indicator (x121/e164) and the -- second index is the prefixDNA digits. mpanlPrefixDna OBJECT IDENTIFIER ::= { mpanl 4 } mpanlPrefixDnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlPrefixDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mpanlPrefixDna components." ::= { mpanlPrefixDna 1 } mpanlPrefixDnaRowStatusEntry OBJECT-TYPE SYNTAX MpanlPrefixDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlPrefixDna component." INDEX { mpanlIndex, mpanlPrefixDnaNumberingPlanIndicatorIndex, mpanlPrefixDnaDataNetworkAddressIndex } ::= { mpanlPrefixDnaRowStatusTable 1 } MpanlPrefixDnaRowStatusEntry ::= SEQUENCE { mpanlPrefixDnaRowStatus RowStatus, mpanlPrefixDnaComponentName DisplayString, mpanlPrefixDnaStorageType StorageType, mpanlPrefixDnaNumberingPlanIndicatorIndex INTEGER, mpanlPrefixDnaDataNetworkAddressIndex DigitString } mpanlPrefixDnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlPrefixDna components. These components cannot be added nor deleted." ::= { mpanlPrefixDnaRowStatusEntry 1 } mpanlPrefixDnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlPrefixDnaRowStatusEntry 2 } mpanlPrefixDnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlPrefixDna tables." ::= { mpanlPrefixDnaRowStatusEntry 4 } mpanlPrefixDnaNumberingPlanIndicatorIndex OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mpanlPrefixDna tables." ::= { mpanlPrefixDnaRowStatusEntry 10 } mpanlPrefixDnaDataNetworkAddressIndex OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the mpanlPrefixDna tables." ::= { mpanlPrefixDnaRowStatusEntry 11 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Mpanl/n DataLinkConnectionIdentifier/n -- This component is responsible for the Frame Relay U-plane (User- -- plane) protocol for the specified instance. There can be many -- instances of Dlci for each Mpanl. The instance value is used to -- identify the logical connection, multiplexed within the physical -- channel, with which a frame is associated. All frames carried within -- a particular physical channel and having the same DLCI value are -- associated with the same logical connection. -- -- A DLCI refers to a switched virtual circuit (SVC) which is created -- dynamically through signaling. mpanlDlci OBJECT IDENTIFIER ::= { mpanl 5 } mpanlDlciRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mpanlDlci components." ::= { mpanlDlci 1 } mpanlDlciRowStatusEntry OBJECT-TYPE SYNTAX MpanlDlciRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlDlci component." INDEX { mpanlIndex, mpanlDlciIndex } ::= { mpanlDlciRowStatusTable 1 } MpanlDlciRowStatusEntry ::= SEQUENCE { mpanlDlciRowStatus RowStatus, mpanlDlciComponentName DisplayString, mpanlDlciStorageType StorageType, mpanlDlciIndex Integer32 } mpanlDlciRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlDlci components. These components cannot be added nor deleted." ::= { mpanlDlciRowStatusEntry 1 } mpanlDlciComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlDlciRowStatusEntry 2 } mpanlDlciStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlDlci tables." ::= { mpanlDlciRowStatusEntry 4 } mpanlDlciIndex OBJECT-TYPE SYNTAX Integer32 (17..1007) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlDlci tables." ::= { mpanlDlciRowStatusEntry 10 } mpanlDlciStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide." ::= { mpanlDlci 10 } mpanlDlciStateEntry OBJECT-TYPE SYNTAX MpanlDlciStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciStateTable." INDEX { mpanlIndex, mpanlDlciIndex } ::= { mpanlDlciStateTable 1 } MpanlDlciStateEntry ::= SEQUENCE { mpanlDlciAdminState INTEGER, mpanlDlciOperationalState INTEGER, mpanlDlciUsageState INTEGER, mpanlDlciAvailabilityStatus OCTET STRING, mpanlDlciProceduralStatus OCTET STRING, mpanlDlciControlStatus OCTET STRING, mpanlDlciAlarmStatus OCTET STRING, mpanlDlciStandbyStatus INTEGER, mpanlDlciUnknownStatus INTEGER } mpanlDlciAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { unlocked } ::= { mpanlDlciStateEntry 1 } mpanlDlciOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { disabled } ::= { mpanlDlciStateEntry 2 } mpanlDlciUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { idle } ::= { mpanlDlciStateEntry 3 } mpanlDlciAvailabilityStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)" ::= { mpanlDlciStateEntry 4 } mpanlDlciProceduralStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)" ::= { mpanlDlciStateEntry 5 } mpanlDlciControlStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)" ::= { mpanlDlciStateEntry 6 } mpanlDlciAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)" ::= { mpanlDlciStateEntry 7 } mpanlDlciStandbyStatus OBJECT-TYPE SYNTAX INTEGER { hotStandby(0), coldStandby(1), providingService(2), notSet(15) } ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource." DEFVAL { notSet } ::= { mpanlDlciStateEntry 8 } mpanlDlciUnknownStatus OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure." DEFVAL { false } ::= { mpanlDlciStateEntry 9 } mpanlDlciCalldTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciCalldEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group of attributes describes the characteristics of the call such as call type and call state." ::= { mpanlDlci 11 } mpanlDlciCalldEntry OBJECT-TYPE SYNTAX MpanlDlciCalldEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciCalldTable." INDEX { mpanlIndex, mpanlDlciIndex } ::= { mpanlDlciCalldTable 1 } MpanlDlciCalldEntry ::= SEQUENCE { mpanlDlciQ933CallState INTEGER, mpanlDlciQ933CallReference Unsigned32 } mpanlDlciQ933CallState OBJECT-TYPE SYNTAX INTEGER { null(0), callInitiated(1), outgoingCallProceeding(3), callPresent(6), incomingCallProceeding(9), active(10), disconnectRequest(11), disconnectIndication(12), releaseRequest(19), notApplicable(20) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Q.933 state of an SVC call. In the description that follows, 'local' refers to the user who has initiated the SETUP request, and 'remote' refers to the user to whom the local user wishes to connect. State description: In the null state, the network has neither received nor sent call setup requests for this DLCI. In the callInitiated state, the network has received a SETUP message from the local user. In the outgoingCallProceeding state, the network has sent a CALL PROCEEDING message to the local user in response to the SETUP message. In the callPresent state, the network has sent a SETUP message to the remote user. In the incomingCallProceeding state, the network has received a CALL PROCEEDING message from the remote user in response to a SETUP message. In the active state, either the network has sent a CONNECT message to the local user, or the network has received a CONNECT from the remote user. In the disconnectRequest state, the network has received a DISCONNECT message from the local user. In the disconnectIndication state, the network has sent a DISCONNECT to the local user. In the releaseRequest state, the network has sent out a RELEASE message to the local user. The notApplicable state indicates that this attribute is meaningless because the DLCI is a PVC." ::= { mpanlDlciCalldEntry 2 } mpanlDlciQ933CallReference OBJECT-TYPE SYNTAX Unsigned32 (0..32767) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Q.933 call reference number associated with this DLCI." ::= { mpanlDlciCalldEntry 3 } mpanlDlciSpOpTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciSpOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the service parameters specific to this instance of Dlci." ::= { mpanlDlci 12 } mpanlDlciSpOpEntry OBJECT-TYPE SYNTAX MpanlDlciSpOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciSpOpTable." INDEX { mpanlIndex, mpanlDlciIndex } ::= { mpanlDlciSpOpTable 1 } MpanlDlciSpOpEntry ::= SEQUENCE { mpanlDlciMaximumFrameSize Unsigned32, mpanlDlciCommittedBurstSize Unsigned32, mpanlDlciExcessBurstSize Unsigned32, mpanlDlciAccounting INTEGER, mpanlDlciEmissionPriorityToIf INTEGER, mpanlDlciTransferPriToNwk Unsigned32, mpanlDlciTransferPriFromNwk Unsigned32 } mpanlDlciMaximumFrameSize OBJECT-TYPE SYNTAX Unsigned32 (1..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of octets which may be included in the information field. The frame relay header and CRC octets are not included in this definition. This attribute corresponds to the dN1 parameter described in the Frame Relay Vendor Forum Specification." ::= { mpanlDlciSpOpEntry 1 } mpanlDlciCommittedBurstSize OBJECT-TYPE SYNTAX Unsigned32 (0..50000000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the committed burst size (Bc) in bits. bc is the amount of data that a network agrees to transfer under normal conditions over a measurement interval (t). Data marked DE=1 is not accounted for in Bc. This attribute should be ignored when rateEnforcement is off." ::= { mpanlDlciSpOpEntry 4 } mpanlDlciExcessBurstSize OBJECT-TYPE SYNTAX Unsigned32 (0..50000000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the excess burst size (Be) in bits. Be is the amount of uncommitted data that the network will attempt to deliver over measurement interval T. Data marked DE=1 by the user or by the network is accounted for here. This attribute should be ignored when rateEnforcement is off." ::= { mpanlDlciSpOpEntry 5 } mpanlDlciAccounting OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generation to be occur, the accountingOn attribute must be on and at least one of the accountCollection options in the DataNetworkAddress component must be selected." ::= { mpanlDlciSpOpEntry 8 } mpanlDlciEmissionPriorityToIf OBJECT-TYPE SYNTAX INTEGER (0 | 1 | 2 | 3) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the emission priority of frames sent to the interface. A larger value denotes a higher priority." ::= { mpanlDlciSpOpEntry 9 } mpanlDlciTransferPriToNwk OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the priority at which data is transferred to the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required." ::= { mpanlDlciSpOpEntry 10 } mpanlDlciTransferPriFromNwk OBJECT-TYPE SYNTAX Unsigned32 (0..15) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the priority at which data is transferred from the network. The transfer priority is a preference configured for an application according to its delay-sensitivity requirement. Frames with higher transfer priority are served by the network before the frames with lower priority. The transfer priority standard is defined to have 16 indices from 0 to 15. Each transfer priority n, where n specifies the transfer priority index, contains a default setting for routing class of service (multimedia, delay or throughput) and frame relay egress queue (depending on the number of supported egress queues on the remote end interface) specified by the routingClassOfService and emissionPriority attributes provisioned in the Mod Frs DprsNet Tpm/n component. The default mapping can be altered by a user if required." ::= { mpanlDlciSpOpEntry 11 } mpanlDlciStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for the MPANL Data Link Connection Identifier." ::= { mpanlDlci 13 } mpanlDlciStatsEntry OBJECT-TYPE SYNTAX MpanlDlciStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciStatsTable." INDEX { mpanlIndex, mpanlDlciIndex } ::= { mpanlDlciStatsTable 1 } MpanlDlciStatsEntry ::= SEQUENCE { mpanlDlciFrmToIf Unsigned32, mpanlDlciFecnFrmToIf Unsigned32, mpanlDlciBecnFrmToIf Unsigned32, mpanlDlciBciToSubnet Unsigned32, mpanlDlciDeFrmToIf Unsigned32, mpanlDlciDiscCongestedToIf Unsigned32, mpanlDlciDiscDeCongestedToIf Unsigned32, mpanlDlciFrmFromIf Unsigned32, mpanlDlciFecnFrmFromIf Unsigned32, mpanlDlciBecnFrmFromIf Unsigned32, mpanlDlciFciFromSubnet Unsigned32, mpanlDlciBciFromSubnet Unsigned32, mpanlDlciDeFrmFromIf Unsigned32, mpanlDlciExcessFrmFromIf Unsigned32, mpanlDlciDiscExcessFromIf Unsigned32, mpanlDlciDiscFrameAbit Unsigned32, mpanlDlciDiscCongestedFromIf Unsigned32, mpanlDlciDiscDeCongestedFromIf Unsigned32, mpanlDlciErrorShortFrmFromIf Unsigned32, mpanlDlciErrorLongFrmFromIf Unsigned32, mpanlDlciBecnFrmSetByService Unsigned32, mpanlDlciBytesToIf Unsigned32, mpanlDlciDeBytesToIf Unsigned32, mpanlDlciDiscCongestedToIfBytes Unsigned32, mpanlDlciDiscDeCongestedToIfBytes Unsigned32, mpanlDlciBytesFromIf Unsigned32, mpanlDlciDeBytesFromIf Unsigned32, mpanlDlciExcessBytesFromIf Unsigned32, mpanlDlciDiscExcessFromIfBytes Unsigned32, mpanlDlciDiscByteAbit Unsigned32, mpanlDlciDiscCongestedFromIfBytes Unsigned32, mpanlDlciDiscDeCongestedFromIfBytes Unsigned32, mpanlDlciErrorLongBytesFromIf Unsigned32, mpanlDlciTransferPriorityToNetwork INTEGER, mpanlDlciTransferPriorityFromNetwork INTEGER } mpanlDlciFrmToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames sent out the interface. When the maximum count is reached the count wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 1 } mpanlDlciFecnFrmToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames sent to the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 2 } mpanlDlciBecnFrmToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames sent to the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 3 } mpanlDlciBciToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames sent into the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 4 } mpanlDlciDeFrmToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 5 } mpanlDlciDiscCongestedToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frame discards at the MPANL service due to local congestion in the direction toward the interface. When this count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 6 } mpanlDlciDiscDeCongestedToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the MPANL service, due to local congestion in the direction toward the interface. When this count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 7 } mpanlDlciFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the interface. Frames that are discarded due to error or excess are not counted. When the maximum count is reached the count wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 8 } mpanlDlciFecnFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the interface with the Forward Explicit Congestion Notification (FECN) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 9 } mpanlDlciBecnFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the interface with the Backward Explicit Congestion Notification (BECN) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 10 } mpanlDlciFciFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the network with the Forward Congestion Indication (FCI) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 11 } mpanlDlciBciFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the network with the Backward Congestion Indication (BCI) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 12 } mpanlDlciDeFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 13 } mpanlDlciExcessFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 14 } mpanlDlciDiscExcessFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 15 } mpanlDlciDiscFrameAbit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frame discards at the MPANL Service, due to an inactive PVC status, in the direction toward the network. When this count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 16 } mpanlDlciDiscCongestedFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frame discards at the MPANL service due to local congestion in the direction toward the network. When this count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 17 } mpanlDlciDiscDeCongestedFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of discarded frames, with the Discard Eligibility (DE) bit set, at the MPANL service, due to local congestion, in the direction toward the network. When this count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 18 } mpanlDlciErrorShortFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received with 0 octets in the information field. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 19 } mpanlDlciErrorLongFrmFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the frames received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it wraps to zero. Frames whose lengths are greater than the hardware receive buffer are ignored by the hardware and are therefore not included in this count." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 20 } mpanlDlciBecnFrmSetByService OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of frames with BECN set by the MPANL service. It is incremented whenever the MPANL service sets BECN on a frame upon detecting local congestion. This count is incremented regardless of whether the frame already bears a set BECN bit since its use is to determine the place of congestion. When the count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 21 } mpanlDlciBytesToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes sent out the interface. When the maximum count is reached the count wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 22 } mpanlDlciDeBytesToIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes sent to the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 23 } mpanlDlciDiscCongestedToIfBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of byte discards at the MPANL service due to local congestion in the direction toward the link. When this count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 24 } mpanlDlciDiscDeCongestedToIfBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of discard eligible (DE=1) byte discards at the MPANL service due to local congestion in the direction toward the link. When the maximum count is reached the count wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 25 } mpanlDlciBytesFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes received from the interface. Bytes that are discarded due to error or excess are not counted. When the maximum count is reached the count wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 26 } mpanlDlciDeBytesFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit set. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 27 } mpanlDlciExcessBytesFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes received from the interface with the Discard Eligibility (DE) bit clear, but subsequently set by the network due to rate enforcement. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 28 } mpanlDlciDiscExcessFromIfBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes which were discarded due to rate enforcement. When the count reaches maximum it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 29 } mpanlDlciDiscByteAbit OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes which were discarded due to aBit turned off." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 30 } mpanlDlciDiscCongestedFromIfBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of byte discards at the MPANL service due to local congestion in the direction toward the network. When this count reaches maximum, it wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 31 } mpanlDlciDiscDeCongestedFromIfBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of discard eligible (DE=1) byte discards at the MPANL service due to local congestion in the direction toward the network. When the maximum count is reached the count wraps to zero." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 32 } mpanlDlciErrorLongBytesFromIf OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the bytes received with number of octets in the information field greater than the subscribed maximum. When the count reaches maximum it wraps to zero. Bytes whose lengths are greater than the hardware receive buffer are ignored by the hardware and are therefore not included in this count." DEFVAL { 0 } ::= { mpanlDlciStatsEntry 34 } mpanlDlciTransferPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is obsolete. It is replaced by attribute transferPriorityToNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp." ::= { mpanlDlciStatsEntry 37 } mpanlDlciTransferPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { n0(0), n1(1), n2(2), n3(3), n4(4), n5(5), n6(6), n7(7), n8(8), n9(9), n10(10), n11(11), n12(12), n13(13), n14(14), n15(15) } ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is obsolete. It is replaced by attribute transferPriorityFromNetwork under group FrsNniDataLinkConnectionIdentifierServiceParametersOp." ::= { mpanlDlciStatsEntry 38 } mpanlDlciIntTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciIntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics for the MPANL Data Link Connection Identifier interval data." ::= { mpanlDlci 14 } mpanlDlciIntEntry OBJECT-TYPE SYNTAX MpanlDlciIntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciIntTable." INDEX { mpanlIndex, mpanlDlciIndex } ::= { mpanlDlciIntTable 1 } MpanlDlciIntEntry ::= SEQUENCE { mpanlDlciStartTime EnterpriseDateAndTime, mpanlDlciTotalIngressBytes Unsigned64, mpanlDlciTotalEgressBytes Unsigned64, mpanlDlciEirIngressBytes Unsigned64, mpanlDlciEirEgressBytes Unsigned64, mpanlDlciDiscardedBytes Unsigned64, mpanlDlciTotalIngressSegFrm Unsigned32, mpanlDlciTotalEgressSegFrm Unsigned32, mpanlDlciEirIngressSegFrm Unsigned32, mpanlDlciEirEgressSegFrm Unsigned32, mpanlDlciDiscardedSegFrm Unsigned32, mpanlDlciCallReferenceNumber Unsigned32, mpanlDlciElapsedDifference Unsigned32 } mpanlDlciStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the start time of this interval period. If the Vc spans 12 hour time or time of day change, startTime reflects new time as recorded at 12 hour periods or time of day changes. A new interval period is started each time an accounting record is generated." ::= { mpanlDlciIntEntry 1 } mpanlDlciTotalIngressBytes OBJECT-TYPE SYNTAX Unsigned64 (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total bytes received from the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." ::= { mpanlDlciIntEntry 2 } mpanlDlciTotalEgressBytes OBJECT-TYPE SYNTAX Unsigned64 (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total bytes sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." ::= { mpanlDlciIntEntry 3 } mpanlDlciEirIngressBytes OBJECT-TYPE SYNTAX Unsigned64 (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." ::= { mpanlDlciIntEntry 4 } mpanlDlciEirEgressBytes OBJECT-TYPE SYNTAX Unsigned64 (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total bytes with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." ::= { mpanlDlciIntEntry 5 } mpanlDlciDiscardedBytes OBJECT-TYPE SYNTAX Unsigned64 (SIZE (8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total bytes in invalid frames received from the interface and discarded at the DLCI since the start of the interval period. This count is a sum of octets in frames discarded due to the number of octets in the information field greater than the subscribed maximum or equal to 0, due to aBit turned off, or due to rate enforcement. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." ::= { mpanlDlciIntEntry 6 } mpanlDlciTotalIngressSegFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames received from the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the total number of frames received from the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." DEFVAL { 0 } ::= { mpanlDlciIntEntry 7 } mpanlDlciTotalEgressSegFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the total number of segments in frames sent to the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the total number of frames sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." DEFVAL { 0 } ::= { mpanlDlciIntEntry 8 } mpanlDlciEirIngressSegFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of frames with the Discard Eligibility (DE) bit set sent to the subnet since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." DEFVAL { 0 } ::= { mpanlDlciIntEntry 9 } mpanlDlciEirEgressSegFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in frames with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of frames with the Discard Eligibility (DE) bit set sent to the interface since the start of the interval period. The start of the interval period is captured in the startTime attribute. The count is reset to zero when an accounting record is generated." DEFVAL { 0 } ::= { mpanlDlciIntEntry 10 } mpanlDlciDiscardedSegFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "If the value of the unitsCounted attribute in moduleData component is segments, this attribute counts the number of segments in invalid frames received from the interface and discarded at the DLCI. If the value of the unitsCounted attribute in moduleData component is frames, this attribute counts the number of invalid frames received from the interface and discarded at the DLCI. Segments of frames are counted since the start of the interval period. The count is reset to zero when an accounting record is generated. The count is a sum of segments in frames or frames discarded due to the number of octets in the information field greater than the subscribed maximum or equal to 0, due to aBit turned off, or due to rate enforcement." DEFVAL { 0 } ::= { mpanlDlciIntEntry 11 } mpanlDlciCallReferenceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." DEFVAL { 0 } ::= { mpanlDlciIntEntry 17 } mpanlDlciElapsedDifference OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since the call started." DEFVAL { 0 } ::= { mpanlDlciIntEntry 18 } mpanlDlciAbitTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciAbitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the A-Bit status information for this Data Link Connection Identifier. A-Bit status information is only applicable for SPVCs. For SVCs, the values of attributes under this group are all notApplicable." ::= { mpanlDlci 15 } mpanlDlciAbitEntry OBJECT-TYPE SYNTAX MpanlDlciAbitEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciAbitTable." INDEX { mpanlIndex, mpanlDlciIndex } ::= { mpanlDlciAbitTable 1 } MpanlDlciAbitEntry ::= SEQUENCE { mpanlDlciABitStatusToIf INTEGER, mpanlDlciABitReasonToIf INTEGER, mpanlDlciABitStatusFromIf INTEGER, mpanlDlciABitReasonFromIf INTEGER, mpanlDlciLoopbackState INTEGER } mpanlDlciABitStatusToIf OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1), notApplicable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the most recent A-Bit status sent to the interface. The A-Bit status is originated from the SPVC end point at the remote end of the Passport subnet and it is relayed to the interface by Mpanl. When an inactive setting is sent out, Mpanl will discard any data offered from the interface. When an active setting is sent out, Mpanl will try to relay all data offered from the interface to the other end of the SPVC." DEFVAL { inactive } ::= { mpanlDlciAbitEntry 1 } mpanlDlciABitReasonToIf OBJECT-TYPE SYNTAX INTEGER { notApplicable(0), remoteUserSignaled(1), remoteLmiError(3), remoteLinkDown(5), vcDown(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute provides the reason (if any) for an inactive status to be sent to the interface. This reason is not applicable for an active status. A-Bit status reason description: The A-Bit status reason is notApplicable when the A-Bit status is active. The A-Bit status reason is remoteUserSignaled if the SPVC end point originating the A-Bit status has detected that the virtual circuit is down at the remote network through the LMI protocol. The SPVC end point must be running network site LMI protocol for this A-Bit status reason to be sent. The A-Bit status reason is remoteLmiError if the LMI protocol is down at the SPVC end point originating this A-Bit status reason. The A-Bit status reason is remoteLinkDown if the physical interface is disabled at the SPVC end point originating this A-Bit status reason. The A-Bit reason is vcDown if no A-Bit status has been sent to the interface (i.e., no A-Bit status has been relayed)." DEFVAL { vcDown } ::= { mpanlDlciAbitEntry 2 } mpanlDlciABitStatusFromIf OBJECT-TYPE SYNTAX INTEGER { inactive(0), active(1), notApplicable(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the most recent A-Bit status received from the interface. It is an indication from the equipment attached to the interface on whether it is ready to accept data. Mpanl relays the A- Bit status from interface to the other end of the SPVC. When an inactive setting is received, Mpanl will discard any data offered from the subnet. When an active setting is received, Mpanl will try to relay all data offered from the subnet to the interface." DEFVAL { inactive } ::= { mpanlDlciAbitEntry 3 } mpanlDlciABitReasonFromIf OBJECT-TYPE SYNTAX INTEGER { notApplicable(0), remoteUserSignaled(1), remoteLmiError(3), remoteLinkDown(5), vcDown(6) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute provides the reason (if any) for an inactive status to be sent to the subnet. This reason is not applicable for an active status. A-Bit status reason description: The A-Bit status reason is notApplicable when the A-Bit status is active. The A-Bit status reason is remoteUserSignaled if the SPVC end point originating the A-Bit status has detected that the DLCI is inactive at the remote network through the LMI protocol. The SPVC end point must be running network site LMI protocol for this A-Bit status reason to be sent. The A-Bit status reason is remoteLmiError if the LMI protocol is down at the SPVC end point originating this A-Bit status reason. The A-Bit status reason is remoteLinkDown if the physical interface is disabled at the SPVC end point originating this A-Bit status reason. The A-Bit reason is vcDown if no A-Bit status has been received from the interface (i.e., no A-Bit status has been relayed)." DEFVAL { vcDown } ::= { mpanlDlciAbitEntry 4 } mpanlDlciLoopbackState OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute has the value on when the DLCI is in loopback mode and off otherwise. This loopback command verbs start and stop are used to initiate and terminate the loopback mode for a DLCI. While loopbackState is on, an active A-bit signal will be reliably propagated across the subnet to the remote DLCI." DEFVAL { off } ::= { mpanlDlciAbitEntry 5 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- FrUni/n Dlci/n LoopBack -- FrNni/n Dlci/n LoopBack -- This component is the data loopback tool for the parent DLCI. mpanlDlciLb OBJECT IDENTIFIER ::= { mpanlDlci 2 } mpanlDlciLbRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciLbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mpanlDlciLb components." ::= { mpanlDlciLb 1 } mpanlDlciLbRowStatusEntry OBJECT-TYPE SYNTAX MpanlDlciLbRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlDlciLb component." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciLbIndex } ::= { mpanlDlciLbRowStatusTable 1 } MpanlDlciLbRowStatusEntry ::= SEQUENCE { mpanlDlciLbRowStatus RowStatus, mpanlDlciLbComponentName DisplayString, mpanlDlciLbStorageType StorageType, mpanlDlciLbIndex NonReplicated } mpanlDlciLbRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlDlciLb components. These components cannot be added nor deleted." ::= { mpanlDlciLbRowStatusEntry 1 } mpanlDlciLbComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlDlciLbRowStatusEntry 2 } mpanlDlciLbStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlDlciLb tables." ::= { mpanlDlciLbRowStatusEntry 4 } mpanlDlciLbIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlDlciLb tables." ::= { mpanlDlciLbRowStatusEntry 10 } mpanlDlciLbStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciLbStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all the statistics for the data loopback tool." ::= { mpanlDlciLb 10 } mpanlDlciLbStatsEntry OBJECT-TYPE SYNTAX MpanlDlciLbStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciLbStatsTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciLbIndex } ::= { mpanlDlciLbStatsTable 1 } MpanlDlciLbStatsEntry ::= SEQUENCE { mpanlDlciLbLocalTotalFrm Unsigned32, mpanlDlciLbLocalTotalBytes Unsigned32, mpanlDlciLbLocalFecnFrm Unsigned32, mpanlDlciLbLocalBecnFrm Unsigned32, mpanlDlciLbLocalDeFrm Unsigned32, mpanlDlciLbLocalDeBytes Unsigned32, mpanlDlciLbRemoteTotalFrm Unsigned32, mpanlDlciLbRemoteTotalBytes Unsigned32, mpanlDlciLbRemoteFecnFrm Unsigned32, mpanlDlciLbRemoteBecnFrm Unsigned32, mpanlDlciLbRemoteDeFrm Unsigned32, mpanlDlciLbRemoteDeBytes Unsigned32 } mpanlDlciLbLocalTotalFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames looped back to the link since loopback was last started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 1 } mpanlDlciLbLocalTotalBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of bytes looped back to the link since loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 2 } mpanlDlciLbLocalFecnFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the link since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 3 } mpanlDlciLbLocalBecnFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the link since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 4 } mpanlDlciLbLocalDeFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 5 } mpanlDlciLbLocalDeBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the link since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 6 } mpanlDlciLbRemoteTotalFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames looped back to the subnet since loopback was last started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 7 } mpanlDlciLbRemoteTotalBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of bytes looped back to the subnet since loopback was last started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 8 } mpanlDlciLbRemoteFecnFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames with the Forward Explicit Congestion Notification (FECN) bit set, looped back to the subnet since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 9 } mpanlDlciLbRemoteBecnFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames with the Backward Explicit Congestion Notification (BECN) bit set, looped back to the subnet since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 10 } mpanlDlciLbRemoteDeFrm OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 13 } mpanlDlciLbRemoteDeBytes OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of bytes in frames with the Discard Eligibility (DE) bit set, looped back to the subnet since the loopback mode was started." DEFVAL { 0 } ::= { mpanlDlciLbStatsEntry 14 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Mpanl/ Dlci/ Vc -- This component defines attributes collected by Mpanl/n Dlci/n Vc. mpanlDlciVc OBJECT IDENTIFIER ::= { mpanlDlci 3 } mpanlDlciVcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mpanlDlciVc components." ::= { mpanlDlciVc 1 } mpanlDlciVcRowStatusEntry OBJECT-TYPE SYNTAX MpanlDlciVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlDlciVc component." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciVcIndex } ::= { mpanlDlciVcRowStatusTable 1 } MpanlDlciVcRowStatusEntry ::= SEQUENCE { mpanlDlciVcRowStatus RowStatus, mpanlDlciVcComponentName DisplayString, mpanlDlciVcStorageType StorageType, mpanlDlciVcIndex NonReplicated } mpanlDlciVcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlDlciVc components. These components cannot be added nor deleted." ::= { mpanlDlciVcRowStatusEntry 1 } mpanlDlciVcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlDlciVcRowStatusEntry 2 } mpanlDlciVcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlDlciVc tables." ::= { mpanlDlciVcRowStatusEntry 4 } mpanlDlciVcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlDlciVc tables." ::= { mpanlDlciVcRowStatusEntry 10 } mpanlDlciVcCadTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application." ::= { mpanlDlciVc 10 } mpanlDlciVcCadEntry OBJECT-TYPE SYNTAX MpanlDlciVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciVcCadTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciVcIndex } ::= { mpanlDlciVcCadTable 1 } MpanlDlciVcCadEntry ::= SEQUENCE { mpanlDlciVcType INTEGER, mpanlDlciVcState INTEGER, mpanlDlciVcPreviousState INTEGER, mpanlDlciVcDiagnosticCode Unsigned32, mpanlDlciVcPreviousDiagnosticCode Unsigned32, mpanlDlciVcCalledNpi INTEGER, mpanlDlciVcCalledDna DigitString, mpanlDlciVcCalledLcn Unsigned32, mpanlDlciVcCallingNpi INTEGER, mpanlDlciVcCallingDna DigitString, mpanlDlciVcCallingLcn Unsigned32, mpanlDlciVcAccountingEnabled INTEGER, mpanlDlciVcFastSelectCall INTEGER, mpanlDlciVcPathReliability INTEGER, mpanlDlciVcAccountingEnd INTEGER, mpanlDlciVcPriority INTEGER, mpanlDlciVcSegmentSize Unsigned32, mpanlDlciVcMaxSubnetPktSize Unsigned32, mpanlDlciVcRcosToNetwork INTEGER, mpanlDlciVcRcosFromNetwork INTEGER, mpanlDlciVcEmissionPriorityToNetwork INTEGER, mpanlDlciVcEmissionPriorityFromNetwork INTEGER, mpanlDlciVcDataPath AsciiString } mpanlDlciVcType OBJECT-TYPE SYNTAX INTEGER { svc(0), pvc(1), spvc(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the type of call, pvc,svc or spvc." ::= { mpanlDlciVcCadEntry 1 } mpanlDlciVcState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4." ::= { mpanlDlciVcCadEntry 2 } mpanlDlciVcPreviousState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing." ::= { mpanlDlciVcCadEntry 3 } mpanlDlciVcDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { mpanlDlciVcCadEntry 4 } mpanlDlciVcPreviousDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { mpanlDlciVcCadEntry 5 } mpanlDlciVcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the called end." ::= { mpanlDlciVcCadEntry 6 } mpanlDlciVcCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection." ::= { mpanlDlciVcCadEntry 7 } mpanlDlciVcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information." ::= { mpanlDlciVcCadEntry 8 } mpanlDlciVcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." ::= { mpanlDlciVcCadEntry 9 } mpanlDlciVcCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the calling end." ::= { mpanlDlciVcCadEntry 10 } mpanlDlciVcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the calling end." ::= { mpanlDlciVcCadEntry 11 } mpanlDlciVcAccountingEnabled OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options." ::= { mpanlDlciVcCadEntry 12 } mpanlDlciVcFastSelectCall OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays that this is a fast select call." ::= { mpanlDlciVcCadEntry 13 } mpanlDlciVcPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the path reliability." ::= { mpanlDlciVcCadEntry 19 } mpanlDlciVcAccountingEnd OBJECT-TYPE SYNTAX INTEGER { callingEnd(0), calledEnd(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record." ::= { mpanlDlciVcCadEntry 20 } mpanlDlciVcPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the call is a normal or a high priority call." ::= { mpanlDlciVcCadEntry 21 } mpanlDlciVcSegmentSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received." ::= { mpanlDlciVcCadEntry 22 } mpanlDlciVcMaxSubnetPktSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum packet size allowed on the Vc." ::= { mpanlDlciVcCadEntry 27 } mpanlDlciVcRcosToNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the routing metric routing class of service to the network." ::= { mpanlDlciVcCadEntry 28 } mpanlDlciVcRcosFromNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the routing metric Routing Class of Service from the Network." ::= { mpanlDlciVcCadEntry 29 } mpanlDlciVcEmissionPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity to the network." ::= { mpanlDlciVcCadEntry 30 } mpanlDlciVcEmissionPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity from the network." ::= { mpanlDlciVcCadEntry 31 } mpanlDlciVcDataPath OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed." ::= { mpanlDlciVcCadEntry 32 } mpanlDlciVcIntdTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued." ::= { mpanlDlciVc 11 } mpanlDlciVcIntdEntry OBJECT-TYPE SYNTAX MpanlDlciVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciVcIntdTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciVcIndex } ::= { mpanlDlciVcIntdTable 1 } MpanlDlciVcIntdEntry ::= SEQUENCE { mpanlDlciVcCallReferenceNumber Hex, mpanlDlciVcElapsedTimeTillNow Unsigned32, mpanlDlciVcSegmentsRx Unsigned32, mpanlDlciVcSegmentsSent Unsigned32, mpanlDlciVcStartTime EnterpriseDateAndTime } mpanlDlciVcCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { mpanlDlciVcIntdEntry 1 } mpanlDlciVcElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started." ::= { mpanlDlciVcIntdEntry 2 } mpanlDlciVcSegmentsRx OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state." ::= { mpanlDlciVcIntdEntry 3 } mpanlDlciVcSegmentsSent OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet." ::= { mpanlDlciVcIntdEntry 4 } mpanlDlciVcStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes." ::= { mpanlDlciVcIntdEntry 5 } mpanlDlciVcFrdTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers" ::= { mpanlDlciVc 12 } mpanlDlciVcFrdEntry OBJECT-TYPE SYNTAX MpanlDlciVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciVcFrdTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciVcIndex } ::= { mpanlDlciVcFrdTable 1 } MpanlDlciVcFrdEntry ::= SEQUENCE { mpanlDlciVcFrmCongestedToSubnet Unsigned32, mpanlDlciVcCannotForwardToSubnet Unsigned32, mpanlDlciVcNotDataXferToSubnet Unsigned32, mpanlDlciVcOutOfRangeFrmFromSubnet Unsigned32, mpanlDlciVcCombErrorsFromSubnet Unsigned32, mpanlDlciVcDuplicatesFromSubnet Unsigned32, mpanlDlciVcNotDataXferFromSubnet Unsigned32, mpanlDlciVcFrmLossTimeouts Unsigned32, mpanlDlciVcOoSeqByteCntExceeded Unsigned32, mpanlDlciVcPeakOoSeqPktCount Unsigned32, mpanlDlciVcPeakOoSeqFrmForwarded Unsigned32, mpanlDlciVcSendSequenceNumber Unsigned32, mpanlDlciVcPktRetryTimeouts Unsigned32, mpanlDlciVcPeakRetryQueueSize Unsigned32, mpanlDlciVcSubnetRecoveries Unsigned32, mpanlDlciVcOoSeqPktCntExceeded Unsigned32, mpanlDlciVcPeakOoSeqByteCount Unsigned32 } mpanlDlciVcFrmCongestedToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size." ::= { mpanlDlciVcFrdEntry 2 } mpanlDlciVcCannotForwardToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well." ::= { mpanlDlciVcFrdEntry 3 } mpanlDlciVcNotDataXferToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure." ::= { mpanlDlciVcFrdEntry 4 } mpanlDlciVcOutOfRangeFrmFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late." ::= { mpanlDlciVcFrdEntry 5 } mpanlDlciVcCombErrorsFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc" ::= { mpanlDlciVcFrdEntry 6 } mpanlDlciVcDuplicatesFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased." ::= { mpanlDlciVcFrdEntry 7 } mpanlDlciVcNotDataXferFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery." ::= { mpanlDlciVcFrdEntry 8 } mpanlDlciVcFrmLossTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { mpanlDlciVcFrdEntry 9 } mpanlDlciVcOoSeqByteCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { mpanlDlciVcFrdEntry 10 } mpanlDlciVcPeakOoSeqPktCount OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { mpanlDlciVcFrdEntry 11 } mpanlDlciVcPeakOoSeqFrmForwarded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue." ::= { mpanlDlciVcFrdEntry 12 } mpanlDlciVcSendSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame." ::= { mpanlDlciVcFrdEntry 13 } mpanlDlciVcPktRetryTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { mpanlDlciVcFrdEntry 15 } mpanlDlciVcPeakRetryQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets." ::= { mpanlDlciVcFrdEntry 16 } mpanlDlciVcSubnetRecoveries OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of successful Vc recovery attempts." ::= { mpanlDlciVcFrdEntry 17 } mpanlDlciVcOoSeqPktCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { mpanlDlciVcFrdEntry 19 } mpanlDlciVcPeakOoSeqByteCount OBJECT-TYPE SYNTAX Unsigned32 (0..50000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { mpanlDlciVcFrdEntry 20 } mpanlDlciVcDmepTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint." ::= { mpanlDlciVc 417 } mpanlDlciVcDmepEntry OBJECT-TYPE SYNTAX MpanlDlciVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciVcDmepTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciVcIndex, mpanlDlciVcDmepValue } ::= { mpanlDlciVcDmepTable 1 } MpanlDlciVcDmepEntry ::= SEQUENCE { mpanlDlciVcDmepValue RowPointer } mpanlDlciVcDmepValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the mpanlDlciVcDmepTable." ::= { mpanlDlciVcDmepEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Mpanl/n Dlci/m LCo -- This component contains all of the operation attributes for a Path -- Oriented Logical Connection. mpanlDlciLCo OBJECT IDENTIFIER ::= { mpanlDlci 4 } mpanlDlciLCoRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciLCoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mpanlDlciLCo components." ::= { mpanlDlciLCo 1 } mpanlDlciLCoRowStatusEntry OBJECT-TYPE SYNTAX MpanlDlciLCoRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlDlciLCo component." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciLCoIndex } ::= { mpanlDlciLCoRowStatusTable 1 } MpanlDlciLCoRowStatusEntry ::= SEQUENCE { mpanlDlciLCoRowStatus RowStatus, mpanlDlciLCoComponentName DisplayString, mpanlDlciLCoStorageType StorageType, mpanlDlciLCoIndex NonReplicated } mpanlDlciLCoRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlDlciLCo components. These components cannot be added nor deleted." ::= { mpanlDlciLCoRowStatusEntry 1 } mpanlDlciLCoComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlDlciLCoRowStatusEntry 2 } mpanlDlciLCoStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlDlciLCo tables." ::= { mpanlDlciLCoRowStatusEntry 4 } mpanlDlciLCoIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlDlciLCo tables." ::= { mpanlDlciLCoRowStatusEntry 10 } mpanlDlciLCoPathDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciLCoPathDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all operational attributes for the path oriented LCo." ::= { mpanlDlciLCo 10 } mpanlDlciLCoPathDataEntry OBJECT-TYPE SYNTAX MpanlDlciLCoPathDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciLCoPathDataTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciLCoIndex } ::= { mpanlDlciLCoPathDataTable 1 } MpanlDlciLCoPathDataEntry ::= SEQUENCE { mpanlDlciLCoState INTEGER, mpanlDlciLCoEnd INTEGER, mpanlDlciLCoCostMetric Unsigned32, mpanlDlciLCoDelayMetric Unsigned32, mpanlDlciLCoRoundTripDelay Unsigned32, mpanlDlciLCoSetupPriority Unsigned32, mpanlDlciLCoHoldingPriority Unsigned32, mpanlDlciLCoRequiredTxBandwidth Gauge32, mpanlDlciLCoRequiredRxBandwidth Gauge32, mpanlDlciLCoRequiredTrafficType INTEGER, mpanlDlciLCoPermittedTrunkTypes OCTET STRING, mpanlDlciLCoRequiredSecurity Unsigned32, mpanlDlciLCoRequiredCustomerParameter Unsigned32, mpanlDlciLCoEmissionPriority Unsigned32, mpanlDlciLCoDiscardPriority Unsigned32, mpanlDlciLCoRetryCount Unsigned32, mpanlDlciLCoPathFailureCount Unsigned32, mpanlDlciLCoReasonForNoRoute INTEGER, mpanlDlciLCoLastTearDownReason INTEGER, mpanlDlciLCoPathFailureAction INTEGER, mpanlDlciLCoBumpPreference INTEGER, mpanlDlciLCoOptimization INTEGER, mpanlDlciLCoPathUpDateTime EnterpriseDateAndTime } mpanlDlciLCoState OBJECT-TYPE SYNTAX INTEGER { pathDown(0), selectingRoute(1), connecting(2), pathUp(3), pathDownRetrying(4) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the current state of the connection. The pathDown state indicates that the application has not yet signalled for a path. The selectingRoute state occurs when a request has been sent to the route selector and it has not yet responded. The connectingState occurs while a path is being established. The pathUp state is the normal operational state of a path. The pathDownRetrying state indicates a path that attempted route selection but received no route and is now waiting to retry route selection again." ::= { mpanlDlciLCoPathDataEntry 1 } mpanlDlciLCoEnd OBJECT-TYPE SYNTAX INTEGER { calling(0), called(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute identifies whether this is the calling or called end of the path." ::= { mpanlDlciLCoPathDataEntry 3 } mpanlDlciLCoCostMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the route's total cost metric. It is calculated as the sum of the cost metric of all trunks in the path at the time the connection was established. The cost metric of a trunk is defined by the trunkCost attribute of the Trunk component. The costMetric for an LCo that is originated and terminated on the same module is 0." ::= { mpanlDlciLCoPathDataEntry 4 } mpanlDlciLCoDelayMetric OBJECT-TYPE SYNTAX Unsigned32 (0..100000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the total delay of the route as the one way delay for a 512 byte packet. It is calculated as the sum of the delays of all trunks in the path stored in topology at the time the connection was established. The delay for an LCo that is originated and terminated on the same module is 0." ::= { mpanlDlciLCoPathDataEntry 5 } mpanlDlciLCoRoundTripDelay OBJECT-TYPE SYNTAX Unsigned32 (0..200000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the time taken for a packet (cell) of 44 bytes to be transmitted to the remote LCo and return to this LCo. The number reported is given in milliseconds to the nearest millisecond. A value of one millisecond is reported if the time is less than 1 millisecond even though the delay may be less than 1 millisecond when the LCo is originated and terminated on the same module." ::= { mpanlDlciLCoPathDataEntry 6 } mpanlDlciLCoSetupPriority OBJECT-TYPE SYNTAX Unsigned32 (0..4) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the priority at which the current path is established. Zero is the highest priority and four is the lowest. The holdingPriority, a complementary attribute of this component, indicates the priority a path maintains once it is established." ::= { mpanlDlciLCoPathDataEntry 7 } mpanlDlciLCoHoldingPriority OBJECT-TYPE SYNTAX Unsigned32 (0..4) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the priority at which a path holds its current path once the path is established. Zero is the highest priority and four is the lowest. The setupPriority, a complementary attribute, indicates the priority of a path at establishment time." ::= { mpanlDlciLCoPathDataEntry 8 } mpanlDlciLCoRequiredTxBandwidth OBJECT-TYPE SYNTAX Gauge32 (0..2048000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of the trunks of its route. This attribute represents the bandwidth for traffic outgoing to the remote end point. The originating end of the connection determines this value." ::= { mpanlDlciLCoPathDataEntry 9 } mpanlDlciLCoRequiredRxBandwidth OBJECT-TYPE SYNTAX Gauge32 (0..2048000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute gives the actual bandwidth (in bits per second) reserved by this path on each of trunks of its route. This attribute represents the bandwidth for traffic incoming from the remote end point. The originating end of the connection determines this value" ::= { mpanlDlciLCoPathDataEntry 10 } mpanlDlciLCoRequiredTrafficType OBJECT-TYPE SYNTAX INTEGER { voice(0), data(1), video(2), trafficType1(3), trafficType2(4), trafficType3(5), trafficType4(6), trafficType5(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This operational attribute indicates the type of traffic transmitted over the path. There are eight possible traffic types, and the path can transmit only one of them. The originating end of the connection determines the type. These are arbitrary designations for traffic type. The voice, data and video traffic types are defined, and five other arbitrary traffic types can be defined by the network administration. This attribute is used in the route selection process to restrict the route to trunks that support this traffic type. The supportedTrafficType trunk attribute lists all the types of traffic allowed on the trunk. For example, if requiredTrafficType is specified as trafficType1 then only trunks that include trafficType1 in supportedTrafficType, will be candidates for this connection." ::= { mpanlDlciLCoPathDataEntry 11 } mpanlDlciLCoPermittedTrunkTypes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "This operational attribute lists up to eight types of trunk that can be used on the route. The originating end of the connection determines the types. The terrestrial and satellite trunk types have been defined, leaving six remaining arbitrary types that can be defined by the network administration. The trunk's type is indicated in the trunkType attribute of the Trunk component. When selecting a route, PORS only chooses trunks whose trunkType are in the permittedTrunkTypes for the path. Description of bits: terrestrial(0) satellite(1) trunkType1(2) trunkType2(3) trunkType3(4) trunkType4(5) trunkType5(6) trunkType6(7)" ::= { mpanlDlciLCoPathDataEntry 12 } mpanlDlciLCoRequiredSecurity OBJECT-TYPE SYNTAX Unsigned32 (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the required minimum level of security of the trunks on the route. Zero represents the most secure and seven represents the least secure. The trunk's security is indicated by the trunkSecurity attribute of the Trunk component, and has values identical in range and meaning to the requiredSecurity attribute. PORS ensures that any route selected does not contain a trunk whose trunkSecurity attribute is numerically greater than the requiredSecurity." ::= { mpanlDlciLCoPathDataEntry 13 } mpanlDlciLCoRequiredCustomerParameter OBJECT-TYPE SYNTAX Unsigned32 (0..7) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the allowed customer defined parameter of the trunks on the route.The originating end of the connection determines the customer defined parameter. Its value, a number from zero to seven, is chosen by a network administration to have a meaning specific to their network, thus allowing them to customize the use of their trunks. A complementary trunk attribute, customerParameter, also has a value from zero to seven. The route selection process does not consider trunks whose customerParameter is greater than the requiredCustomerParameter of the path." ::= { mpanlDlciLCoPathDataEntry 14 } mpanlDlciLCoEmissionPriority OBJECT-TYPE SYNTAX Unsigned32 (0..2) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the urgency with which packets on the path are emitted by the trunks on the route. The originating end of the connection selects the emissionPriority. EmissionPriority of zero indicates the highest emission priority, while two indicates the lowest emission priority. Packets with a higher emissionPriority (or numerically less) are serviced and sent out before the packets of lower emissionPriority (or numerically higher)." ::= { mpanlDlciLCoPathDataEntry 15 } mpanlDlciLCoDiscardPriority OBJECT-TYPE SYNTAX Unsigned32 (1..3) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the importance of the packets on the path.The originating end of the connection sets discardPriority. One is used for paths carrying the most important traffic, and three is used for paths carrying the least important traffic. Packets with lower discardPriority(numerically lower) are discarded after packets with a higher discardPriority(numerically higher)." ::= { mpanlDlciLCoPathDataEntry 16 } mpanlDlciLCoRetryCount OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the count of the number of times the path chosen during route selection could not be instantiated. This count should be three or below if the network is performing adequately. A high value indicates that the route selection is often performed using an out-of-date view of available network bandwidth and/or topology. This attribute will only increase at the calling end of the connection. This attribute is reset each time a path reconnects and stops counting when it reaches its maximum value." ::= { mpanlDlciLCoPathDataEntry 18 } mpanlDlciLCoPathFailureCount OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the count of the number of times the path has successfully reconnected. It is set to zero the first time the path is up. If a path fails anytime after connecting, this count will be incremented when the path is up again. Failed route requests do not count in this statistic. See retryCount(rcount) - page 78. This attribute stops counting at its maximum value." ::= { mpanlDlciLCoPathDataEntry 19 } mpanlDlciLCoReasonForNoRoute OBJECT-TYPE SYNTAX INTEGER { none(0), destinationNameTooLong(1), destinationNotSpecified(2), unknownDestinationName(3), incorrectDestination(4), incorrectDestinationEndPoint(5), unknownSource(6), unknownDestination(7), sameNode(8), routeCostTooMuch(9), routesDelayTooLong(10), attributesNotMet(11), anError(12), attributeProfileProblem(13), manualPathIndexProblem(14) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is the route selection's reasonForNoRoute and provides a brief reason for which a route was not selected. The reasons are essentially self-explanatory." DEFVAL { none } ::= { mpanlDlciLCoPathDataEntry 20 } mpanlDlciLCoLastTearDownReason OBJECT-TYPE SYNTAX INTEGER { none(0), normalShutDown(1), insufficientTxLcOrBandwidth(2), insufficientRxLcOrBandwidth(3), trunkFailure(4), trunkCardFailure(5), operatorForced(6), lostLcnClash(7), networkCongestion(8), trunkNotFound(9), farEndNotFound(10), wrongModuleReached(11), farEndBusy(12), callLoopedBack(13), unknownReason(14), farEndNotReady(15), remoteNameMismatch(16), serviceTypeMismatch(17), reconnectFromFarEnd(18), bumped(19), accessCardFailure(20), optimized(21), overrideRemoteName(22) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute reflects the last tear down reason for a connection (LCo). In many cases this displays the reason for a momentary service interruption. This attribute applies to the last path failure only. If a path is no longer up, this may indicate why the path has failed. In many cases an alarm will also be generated with more specific information. The following is a brief description of the reasons: none - This path has no information for the teardown. normalShutDown - This path has gone down due to normal call termination. insufficientTxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the transmit direction. insufficientRxLcOrBandwidth - At present there is either no available bandwidth or logical channel numbers available on one or more of the trunks for this path in the receive direction. trunkFailure- A trunk on the path has failed or has gone down due to a provisioning change of a critical attribute. trunkCardFailure- A trunk FP card has failed along the path. accessCardFailure- The FP on which the peer access service was running has failed. operatorForced- The path has terminated due to the operator locking a trunk along the path. lostLcnClash- The path has terminated because the PAs at both ends of an intermediate trunk have allocated the same LC to different calls. When this happens both calls must go down and then try to come up again a fraction of a second later (effectively ensuring that they will now be assigned different LCs). It is normal to get the odd clash especially when the PA's usedLC is approaching the PA's maxLC. networkCongestion - The path has failed due to control information being lost and not recoverable. trunkNotFound - Occurs on a manual path usually. Check for trunks not up or names provisioned incorrectly. farEndNotFound - The far end is not provisioned or is not up. Check remote Name. wrongModuleReached - This may occur on a manual path. Check provisioning for correct trunk and service names. For a normal path, the network Topology may be changing. Check remote provisioned DNA. farEndBusy - The far end has been reached but it is busy. Check remote provisioned DNA and remote end provisioning. unknownReason - The failure was not resolved. farEndNotReady - The remote end was reached but the connection was refused due to the remote end not being enabled. serviceTypeMismatch - The remote service type does not match this service type. Check provisioning. reconnectFromFarEnd - The remote end re-established this connection. Check the remote end lastTearDownReason to determine the real reason. bumped - Another call bumped this path from a trunk to get bandwidth (or an LC) which it required to come up. This other path had a higher setupPriority than this path's holdingPriority, hence it was allowed to steal the bandwidth (or LC) from this path. optimized - This call has been rerouted due to the optimization feature. The call is still active; this just indicates why the path changed." DEFVAL { none } ::= { mpanlDlciLCoPathDataEntry 21 } mpanlDlciLCoPathFailureAction OBJECT-TYPE SYNTAX INTEGER { disconnectConnection(0), reRoutePath(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the application is set to tolerate a momentary interruption of a path while a new path is selected. If disconnectConnection is displayed, the application is informed as soon as possible about a failure by disconnection. If the attribute displays reRoutePath, the path may attempt an immediate reroute, provided the failure is a recoverable failure. If rerouting fails the application is informed of the failure. With this option set to reRoutePath the LCo may wait up to 30 seconds before informing the service of complete disconnection in order to allow both ends to attempt to reconnect. All pathTypes respect this attribute. Also, on a manualPath with both ends provisioned with independent paths (at least with respect to the failure) this option will have the desired effect that the path is rerouted without complete disconnection at both ends." ::= { mpanlDlciLCoPathDataEntry 22 } mpanlDlciLCoBumpPreference OBJECT-TYPE SYNTAX INTEGER { bumpWhenNecessary(0), bumpToObtainBestRoute(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies when bumping will occur during the route selection process. Bumping may occur when necessary or always. It will be necessary for a connection to bump if there is not enough resources for the connection to be established and these resources are occupied by a connection whose holdingPriority is lower (numerically higher) than the connection's setupPriority. A connection may also always bump in order to obtain the best route." ::= { mpanlDlciLCoPathDataEntry 23 } mpanlDlciLCoOptimization OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute is used to specify whether this connection should attempt to optimize its path when requested by the routing PORS component. Every path is as optimal as it can be when it is established, but as network traffic patterns and configurations change this path may no longer be as optimal as it could be. The PORS connection manager on a module requests circuits to optimize at the optimization interval." ::= { mpanlDlciLCoPathDataEntry 24 } mpanlDlciLCoPathUpDateTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This is the time stamp when the current path was established or reestablished." ::= { mpanlDlciLCoPathDataEntry 25 } mpanlDlciLCoStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciLCoStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational statistics attributes for the path oriented LCo." ::= { mpanlDlciLCo 11 } mpanlDlciLCoStatsEntry OBJECT-TYPE SYNTAX MpanlDlciLCoStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciLCoStatsTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciLCoIndex } ::= { mpanlDlciLCoStatsTable 1 } MpanlDlciLCoStatsEntry ::= SEQUENCE { mpanlDlciLCoPktsToNetwork PassportCounter64, mpanlDlciLCoBytesToNetwork PassportCounter64, mpanlDlciLCoPktsFromNetwork PassportCounter64, mpanlDlciLCoBytesFromNetwork PassportCounter64 } mpanlDlciLCoPktsToNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets transmitted to the network over this Logical Connection." ::= { mpanlDlciLCoStatsEntry 1 } mpanlDlciLCoBytesToNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of bytes sent to the network over this Logical Connection." ::= { mpanlDlciLCoStatsEntry 2 } mpanlDlciLCoPktsFromNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of packets received from the remote LCo via the network. This attribute wraps to 0." ::= { mpanlDlciLCoStatsEntry 3 } mpanlDlciLCoBytesFromNetwork OBJECT-TYPE SYNTAX PassportCounter64 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of bytes received from the remote LCo via the network. This attribute wraps to 0." ::= { mpanlDlciLCoStatsEntry 4 } mpanlDlciLCoCallDataTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciLCoCallDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains all operational attributes for the path oriented LCo." ::= { mpanlDlciLCo 12 } mpanlDlciLCoCallDataEntry OBJECT-TYPE SYNTAX MpanlDlciLCoCallDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciLCoCallDataTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciLCoIndex } ::= { mpanlDlciLCoCallDataTable 1 } MpanlDlciLCoCallDataEntry ::= SEQUENCE { mpanlDlciLCoCallingNpi INTEGER, mpanlDlciLCoCallingDna DigitString, mpanlDlciLCoElapsedTimeTillNow Unsigned32, mpanlDlciLCoCallReferenceNumber Hex, mpanlDlciLCoCalledNpi INTEGER, mpanlDlciLCoCalledDna DigitString } mpanlDlciLCoCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." DEFVAL { x121 } ::= { mpanlDlciLCoCallDataEntry 27 } mpanlDlciLCoCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (DNA) of the calling end." ::= { mpanlDlciLCoCallDataEntry 28 } mpanlDlciLCoElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the total duration in tenths of miliseconds that a connection has been up for a call." ::= { mpanlDlciLCoCallDataEntry 30 } mpanlDlciLCoCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { mpanlDlciLCoCallDataEntry 31 } mpanlDlciLCoCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Numbering Plan Indicator (NPI) of the called end." DEFVAL { x121 } ::= { mpanlDlciLCoCallDataEntry 33 } mpanlDlciLCoCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Data Network Address (DNA) of the called (destination) DTE to which this call is sent. This address if defined at the receiving end will complete the logical connection." ::= { mpanlDlciLCoCallDataEntry 34 } mpanlDlciLCoPathTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciLCoPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute contains the trunk component names over which the path has been instantiated and the remote end point name terminating the path." ::= { mpanlDlciLCo 401 } mpanlDlciLCoPathEntry OBJECT-TYPE SYNTAX MpanlDlciLCoPathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciLCoPathTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciLCoIndex, mpanlDlciLCoPathValue } ::= { mpanlDlciLCoPathTable 1 } MpanlDlciLCoPathEntry ::= SEQUENCE { mpanlDlciLCoPathValue AsciiString } mpanlDlciLCoPathValue OBJECT-TYPE SYNTAX AsciiString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the mpanlDlciLCoPathTable." ::= { mpanlDlciLCoPathEntry 1 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Mpanl/n Dlci/n JunctorVc -- This component extends the GVC connectivity across MPANL. It -- allows applications in a Legacy Data Module (LDM) subnet to -- establish GVC connections with applications in the Magellan -- subnet. mpanlDlciJvc OBJECT IDENTIFIER ::= { mpanlDlci 5 } mpanlDlciJvcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciJvcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of mpanlDlciJvc components." ::= { mpanlDlciJvc 1 } mpanlDlciJvcRowStatusEntry OBJECT-TYPE SYNTAX MpanlDlciJvcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlDlciJvc component." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciJvcIndex } ::= { mpanlDlciJvcRowStatusTable 1 } MpanlDlciJvcRowStatusEntry ::= SEQUENCE { mpanlDlciJvcRowStatus RowStatus, mpanlDlciJvcComponentName DisplayString, mpanlDlciJvcStorageType StorageType, mpanlDlciJvcIndex NonReplicated } mpanlDlciJvcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlDlciJvc components. These components cannot be added nor deleted." ::= { mpanlDlciJvcRowStatusEntry 1 } mpanlDlciJvcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlDlciJvcRowStatusEntry 2 } mpanlDlciJvcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlDlciJvc tables." ::= { mpanlDlciJvcRowStatusEntry 4 } mpanlDlciJvcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlDlciJvc tables." ::= { mpanlDlciJvcRowStatusEntry 10 } mpanlDlciJvcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciJvcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the operational attributes of the Jvc component." ::= { mpanlDlciJvc 10 } mpanlDlciJvcOperEntry OBJECT-TYPE SYNTAX MpanlDlciJvcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciJvcOperTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciJvcIndex } ::= { mpanlDlciJvcOperTable 1 } MpanlDlciJvcOperEntry ::= SEQUENCE { mpanlDlciJvcCurrentState INTEGER, mpanlDlciJvcPreviousState INTEGER, mpanlDlciJvcCallingNpi INTEGER, mpanlDlciJvcCallingAddress DigitString, mpanlDlciJvcCallingLcn Unsigned32, mpanlDlciJvcCalledNpi INTEGER, mpanlDlciJvcCalledAddress DigitString, mpanlDlciJvcCalledLcn Unsigned32 } mpanlDlciJvcCurrentState OBJECT-TYPE SYNTAX INTEGER { null(0), callRequest(1), callIndication(2), callBlockPresent(3), active(4), discInitiated(5), discPktPresent(6), callDisconnected(7), callTerminated(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current state of the JVC process. The state can be one of: null: waiting for an incoming call or a call request from MPANL, callRequest: waiting for the call connected from MPANL, callIndication: waiting for the call packet from MPANL, callBlockPresent: waiting for the Raccept packet from the subnet, active: relaying packets between the subnet and MPANL, discInitiated: not used by the DCE JVC, discPktPresent: not used by the DCE JVC, callDisconnected: waiting for the termination request from MPANL, callTerminated: waiting for the termination by MPANL." ::= { mpanlDlciJvcOperEntry 1 } mpanlDlciJvcPreviousState OBJECT-TYPE SYNTAX INTEGER { null(0), callRequest(1), callIndication(2), callBlockPresent(3), active(4), discInitiated(5), discPktPresent(6), callDisconnected(7), callTerminated(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the previous state of the JVC process. The state can be one of: null: waiting for an incoming call or a call request from MPANL, callRequest: waiting for the call connected from MPANL, callIndication: waiting for the call packet from MPANL, callBlockPresent: waiting for the Raccept packet from the subnet, active: relaying packets between the subnet and MPANL, discInitiated: not used by the DCE JVC, discPktPresent: not used by the DCE JVC, callDisconnected: waiting for the termination request from MPANL, callTerminated: waiting for the termination by MPANL." ::= { mpanlDlciJvcOperEntry 2 } mpanlDlciJvcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the numbering plan indicator of the calling address. This attribute value is retrieved from the call packet." ::= { mpanlDlciJvcOperEntry 6 } mpanlDlciJvcCallingAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the calling DataNetworkAddress of the interface. It includes the DNIC (first 4 digits) for X.121, and the CC (Country Code) for the E.164 address of the calling end. The maximum length of this attribute is 15 digits. This attribute value is retrieved from the call packet." ::= { mpanlDlciJvcOperEntry 7 } mpanlDlciJvcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the calling LCN (logical channel number) of the interface. This number is assigned to the call request at the calling end. This attribute value is retrieved from the call packet." ::= { mpanlDlciJvcOperEntry 8 } mpanlDlciJvcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the numbering plan indicator of the called address. This attribute value is retrieved from the call packet." ::= { mpanlDlciJvcOperEntry 9 } mpanlDlciJvcCalledAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the called DataNetworkAddress of the interface. It includes the DNIC (first 4 digits) for X.121, and the CC (Country Code) for the E.164 address of the called end. The maximum length of this attribute is 15 digits. This attribute value is retrieved from the Raccept packet." ::= { mpanlDlciJvcOperEntry 10 } mpanlDlciJvcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute contains the called LCN (logical channel number) of the interface. This number is assigned to the call request at the called end. This attribute value is retrieved from the Raccept packet." ::= { mpanlDlciJvcOperEntry 11 } mpanlDlciJvcStatTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlDlciJvcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the statistics collected by the Jvc component." ::= { mpanlDlciJvc 11 } mpanlDlciJvcStatEntry OBJECT-TYPE SYNTAX MpanlDlciJvcStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlDlciJvcStatTable." INDEX { mpanlIndex, mpanlDlciIndex, mpanlDlciJvcIndex } ::= { mpanlDlciJvcStatTable 1 } MpanlDlciJvcStatEntry ::= SEQUENCE { mpanlDlciJvcPacketsFromSubnet Unsigned32, mpanlDlciJvcPacketsToSubnet Unsigned32, mpanlDlciJvcPacketsDiscarded Unsigned32, mpanlDlciJvcProtocolErrors Unsigned32 } mpanlDlciJvcPacketsFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts all packets including control packets received from the subnet. This number reflects also the packets sent to the MPANL process since the JVC does not drop or generate packets in this direction.The value of this attribute wraps to 0 when the maximum value is reached." ::= { mpanlDlciJvcStatEntry 1 } mpanlDlciJvcPacketsToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts all packets including control packets sent into the subnet. This number includes Renew Call Timer Packets that are generated by the JVC. The value of this attribute wraps to 0 when the maximum value is reached." ::= { mpanlDlciJvcStatEntry 2 } mpanlDlciJvcPacketsDiscarded OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts discarded packets that can not be forwarded into the subnet because of subnet congestion. This attribute is increased when packet forwarding fails to forward a packet into the subnet." ::= { mpanlDlciJvcStatEntry 3 } mpanlDlciJvcProtocolErrors OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of protocol errors detected by the JVC in both the MPANL and the subnet directions. A protocol error is counted in the following cases: - reception of a packet from MPANL while waiting for a Raccept packet from the subnet, - reception of a packet from the subnet following a call packet and before the callAccepted is received from MPANL, - reception of a packet from the subnet or from MPANL that is shorter than the subnet header. The value of this attribute wraps to 0 when the maximum value is reached." ::= { mpanlDlciJvcStatEntry 4 } -- Mpanl/ Signaling -- This component defines the Q.933 and Q.922 (LAPF) parameters -- for Frame Relay switched virtual circuits at the Mpanl interface. mpanlSig OBJECT IDENTIFIER ::= { mpanl 6 } mpanlSigRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlSig components." ::= { mpanlSig 1 } mpanlSigRowStatusEntry OBJECT-TYPE SYNTAX MpanlSigRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlSig component." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigRowStatusTable 1 } MpanlSigRowStatusEntry ::= SEQUENCE { mpanlSigRowStatus RowStatus, mpanlSigComponentName DisplayString, mpanlSigStorageType StorageType, mpanlSigIndex NonReplicated } mpanlSigRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlSig components. These components cannot be added nor deleted." ::= { mpanlSigRowStatusEntry 1 } mpanlSigComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlSigRowStatusEntry 2 } mpanlSigStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlSig tables." ::= { mpanlSigRowStatusEntry 4 } mpanlSigIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlSig tables." ::= { mpanlSigRowStatusEntry 10 } mpanlSigSysParmsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigSysParmsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable Q.933 system parameters." ::= { mpanlSig 13 } mpanlSigSysParmsEntry OBJECT-TYPE SYNTAX MpanlSigSysParmsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigSysParmsTable." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigSysParmsTable 1 } MpanlSigSysParmsEntry ::= SEQUENCE { mpanlSigCallSetupTimer Unsigned32, mpanlSigDisconnectTimer Unsigned32, mpanlSigReleaseTimer Unsigned32, mpanlSigCallProceedingTimer Unsigned32, mpanlSigNetworkType INTEGER } mpanlSigCallSetupTimer OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time the network will wait for a response to the SETUP message sent to the called user. Upon timer expiry, the SETUP message is retransmitted. The second expiry of this timer causes the call to be cleared. This value is specified in seconds." DEFVAL { 4 } ::= { mpanlSigSysParmsEntry 1 } mpanlSigDisconnectTimer OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time the network will wait for a response to the DISCONNECT message sent to the user. Upon timer expiry, the RELEASE message is sent. This value is specified in seconds." DEFVAL { 30 } ::= { mpanlSigSysParmsEntry 2 } mpanlSigReleaseTimer OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time the network will wait for a response to the RELEASE message sent to the user. Upon timer expiry, the RELEASE message is retransmitted. The second expiry of the timer causes the call to be released. This value is specified in seconds." DEFVAL { 4 } ::= { mpanlSigSysParmsEntry 3 } mpanlSigCallProceedingTimer OBJECT-TYPE SYNTAX Unsigned32 (1..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time the network will wait for the CONNECT message from the called user after the network has received the optional CALL PROCEEDING message from the called user. Upon timer expiry, the call is cleared. This value is specified in seconds." DEFVAL { 10 } ::= { mpanlSigSysParmsEntry 4 } mpanlSigNetworkType OBJECT-TYPE SYNTAX INTEGER { private(1), public(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether this Frame Relay service is running on a public or a private network. This value is used solely in populating applicable information elements within those Q.933 messages that require a public or private network indication." DEFVAL { private } ::= { mpanlSigSysParmsEntry 5 } mpanlSigLapfSysTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigLapfSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the SVC data link layer. The data link layer is governed primarily through ITU specification Q.922, and operates over DLCI 0.." ::= { mpanlSig 14 } mpanlSigLapfSysEntry OBJECT-TYPE SYNTAX MpanlSigLapfSysEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigLapfSysTable." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigLapfSysTable 1 } MpanlSigLapfSysEntry ::= SEQUENCE { mpanlSigWindowSize Unsigned32, mpanlSigRetransmitLimit Unsigned32, mpanlSigAckTimer Unsigned32, mpanlSigAckDelayTimer Unsigned32, mpanlSigIdleProbeTimer Unsigned32 } mpanlSigWindowSize OBJECT-TYPE SYNTAX Unsigned32 (1..127) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the window size. This is the maximum number of unacknowledged sequenced frames that may be outstanding from or to this interface at any one time." DEFVAL { 7 } ::= { mpanlSigLapfSysEntry 2 } mpanlSigRetransmitLimit OBJECT-TYPE SYNTAX Unsigned32 (0..20) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the number of times a frame can be retransmitted by the SVC data link layer before appropriate recovery action is taken." DEFVAL { 3 } ::= { mpanlSigLapfSysEntry 3 } mpanlSigAckTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the period in milliseconds that the network will wait for an acknowledgment to a sent frame. The value set for ackTimer must be less than the value set for idleProbeTimer." DEFVAL { 1500 } ::= { mpanlSigLapfSysEntry 4 } mpanlSigAckDelayTimer OBJECT-TYPE SYNTAX Unsigned32 (0..10000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum period in milliseconds that the network will wait before sending an acknowledgment for a received in-sequence I-frame. A value of 0 means there will be no delay in acknowledgment." DEFVAL { 0 } ::= { mpanlSigLapfSysEntry 5 } mpanlSigIdleProbeTimer OBJECT-TYPE SYNTAX Unsigned32 (1000..65535000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the time period in milliseconds the link will be permitted to remain idle (that is, no frames are exchanged on the data link). Upon expiry of this timer, the network's side link layer polls its peer for status. The value set for idleProbeTimer must be greater than the value set for ackTimer." DEFVAL { 30000 } ::= { mpanlSigLapfSysEntry 6 } mpanlSigSvcaccTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigSvcaccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attribute to define the defaultAccounting attribute.." ::= { mpanlSig 15 } mpanlSigSvcaccEntry OBJECT-TYPE SYNTAX MpanlSigSvcaccEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigSvcaccTable." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigSvcaccTable 1 } MpanlSigSvcaccEntry ::= SEQUENCE { mpanlSigDefaultAccounting INTEGER } mpanlSigDefaultAccounting OBJECT-TYPE SYNTAX INTEGER { off(0), on(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies whether accounting data collection and record generation is turned on at this DLCI. For accounting data collection and record generation to be turned on, the defaultAccounting bit and at least one of the accountCollection bits in the FrsDataNetworkAddress component must be set to on." DEFVAL { on } ::= { mpanlSigSvcaccEntry 1 } mpanlSigStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mpanlSig 16 } mpanlSigStateEntry OBJECT-TYPE SYNTAX MpanlSigStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigStateTable." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigStateTable 1 } MpanlSigStateEntry ::= SEQUENCE { mpanlSigAdminState INTEGER, mpanlSigOperationalState INTEGER, mpanlSigUsageState INTEGER } mpanlSigAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mpanlSigStateEntry 1 } mpanlSigOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mpanlSigStateEntry 2 } mpanlSigUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mpanlSigStateEntry 3 } mpanlSigStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistics related to the SVC signaling layer at the interface level." ::= { mpanlSig 17 } mpanlSigStatsEntry OBJECT-TYPE SYNTAX MpanlSigStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigStatsTable." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigStatsTable 1 } MpanlSigStatsEntry ::= SEQUENCE { mpanlSigCurrentNumberOfSvcCalls Unsigned32, mpanlSigInCalls Counter32, mpanlSigInCallsRefused Counter32, mpanlSigOutCalls Counter32, mpanlSigOutCallsFailed Counter32, mpanlSigProtocolErrors Counter32, mpanlSigQualityOfServiceNotAvailable Counter32, mpanlSigSetupTimeout Counter32, mpanlSigLastCauseInStatusMsgReceived Unsigned32, mpanlSigLastStateInStatusMsgReceived INTEGER, mpanlSigLastDlciReceivedStatus Unsigned32, mpanlSigLastQ933StateReceivedStatus INTEGER, mpanlSigLastTimeMsgBlockCongested EnterpriseDateAndTime, mpanlSigLastDlciWithMsgBlockCongestion Unsigned32 } mpanlSigCurrentNumberOfSvcCalls OBJECT-TYPE SYNTAX Unsigned32 (0..991) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the number of Frame Relay SVCs currently existing on this interface." ::= { mpanlSigStatsEntry 1 } mpanlSigInCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the current number of incoming SVCs on this interface (that is, the number of SVCs for which this interface represents the destination end of the call)." ::= { mpanlSigStatsEntry 4 } mpanlSigInCallsRefused OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of incoming SVC call requests that are rejected by either this interface or by the called user. When this count reaches maximum, it wraps to zero." ::= { mpanlSigStatsEntry 5 } mpanlSigOutCalls OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the current number of outgoing SVCs on this interface (that is, the number of SVCs for which this interface represents the source end of the call)." ::= { mpanlSigStatsEntry 6 } mpanlSigOutCallsFailed OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of outgoing SVC call requests that are rejected by either this interface, or by the network side of the destination end, or by the called user. When this count reaches maximum, it wraps to zero." ::= { mpanlSigStatsEntry 7 } mpanlSigProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times a Q.933 protocol error has occurred. Any one of the following events constitutes a protocol error: 1. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir, Bc and Be are all zero; 2. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, Cir is zero but Bc is non-zero, or Bc is zero but Cir is non-zero; 3. In the user-signaled Link Layer Core Parameters IE within the SETUP or CONNECT messages, the minimum acceptable Cir is greater than Cir; 4. At the destination end, any of the destination to source direction link layer core parameters has been increased in the CONNECT message from the called user; 5. At the destination end, the destination to source direction Cir in the CONNECT message is smaller than the corresponding minimum acceptable Cir signaled to the called user; 6. At the source end, any of the source to destination direction link layer core parameters in the CONNECT message from the destination end has been increased; 7. At the source end, the source to destination direction Cir, after negotiation, is smaller than the corresponding minimum acceptable Cir; 8. The network has received a STATUS message from the user with an incompatible Q.933 state. When this count reaches maximum, it wraps to zero." ::= { mpanlSigStatsEntry 8 } mpanlSigQualityOfServiceNotAvailable OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of incoming and outgoing SVCs that are rejected because the quality of service requested cannot be met by the network. When this count reaches maximum, it wraps to zero." ::= { mpanlSigStatsEntry 9 } mpanlSigSetupTimeout OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the T303 setup timer has expired. When this count reaches maximum, it wraps to zero." ::= { mpanlSigStatsEntry 10 } mpanlSigLastCauseInStatusMsgReceived OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the cause value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is 0 which means that no STATUS message has been received for an existing call." ::= { mpanlSigStatsEntry 11 } mpanlSigLastStateInStatusMsgReceived OBJECT-TYPE SYNTAX INTEGER { null(0), callInitiated(1), n2(2), outgoingCallProceeding(3), n4(4), n5(5), callPresent(6), n7(7), n8(8), incomingCallProceeding(9), active(10), disconnectRequest(11), disconnectIndication(12), n13(13), n14(14), n15(15), n16(16), n17(17), n18(18), releaseRequest(19), notApplicable(20), n21(21), n22(22), n23(23), n24(24), n25(25), n26(26), n27(27), n28(28), n29(29), n30(30), n31(31), n32(32), n33(33), n34(34), n35(35), n36(36), n37(37), n38(38), n39(39), n40(40), n41(41), n42(42), n43(43), n44(44), n45(45), n46(46), n47(47), n48(48), n49(49), n50(50), n51(51), n52(52), n53(53), n54(54), n55(55), n56(56), n57(57), n58(58), n59(59), n60(60), n61(61), n62(62), n63(63) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the state value in the last received user's STATUS message to an existing call. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is notApplicable." ::= { mpanlSigStatsEntry 12 } mpanlSigLastDlciReceivedStatus OBJECT-TYPE SYNTAX Unsigned32 (0 | 17..1007) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the value of the DLCI that has most recently received a STATUS message from the user. The initial value of this attribute is 0." ::= { mpanlSigStatsEntry 13 } mpanlSigLastQ933StateReceivedStatus OBJECT-TYPE SYNTAX INTEGER { null(0), callInitiated(1), outgoingCallProceeding(3), callPresent(6), incomingCallProceeding(9), active(10), disconnectRequest(11), disconnectIndication(12), releaseRequest(19), notApplicable(20) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the network Q.933 state of the DLCI that has most recently received a STATUS message from the user. The DLCI to which this STATUS message applies is specified in the lastDlciReceivedStatus attribute. The initial value of this attribute is notApplicable." ::= { mpanlSigStatsEntry 14 } mpanlSigLastTimeMsgBlockCongested OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 16)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the most recent time that an SVC DLCI has failed to get a message block due to message block congestion. Exceptional behavior can occur due to this. The DLCI that has most recently encountered this is indicated by the lastDlciWithMsgBlockCongestion attribute. However, all SVC DLCIs may be affected. The initial value of this attribute is 0000-00-00 00:00." ::= { mpanlSigStatsEntry 15 } mpanlSigLastDlciWithMsgBlockCongestion OBJECT-TYPE SYNTAX Unsigned32 (0 | 16..1007) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the value of the DLCI that has most recently failed to get a message block due to message block congestion. The initial value of this attribute is 0." ::= { mpanlSigStatsEntry 16 } mpanlSigLapfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Q.922 SVC data link layer status." ::= { mpanlSig 18 } mpanlSigLapfStatusEntry OBJECT-TYPE SYNTAX MpanlSigLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigLapfStatusTable." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigLapfStatusTable 1 } MpanlSigLapfStatusEntry ::= SEQUENCE { mpanlSigCurrentState INTEGER, mpanlSigLastStateChangeReason INTEGER, mpanlSigFrmrReceive HexString, mpanlSigCurrentQueueSize Counter32 } mpanlSigCurrentState OBJECT-TYPE SYNTAX INTEGER { disconnected(1), linkSetup(2), disconnectRequest(4), informationTransfer(5), waitingAck(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the current state of the SVC data link layer interface." ::= { mpanlSigLapfStatusEntry 1 } mpanlSigLastStateChangeReason OBJECT-TYPE SYNTAX INTEGER { notStarted(1), abmeEntered(3), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), n200RetranTimeOut(12), other(13) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the reason for the most recent state change. notStarted - this is the default state after SVC data link has just been created. abmeEntered - SVC data link has entered Asynchronous Balanced Mode after SABME or UA has been received. abmeReset - the data link has been reset. dmReceived - DM response received. dmSent - DM sent. discReceived - DISC response received. discSent - DISC sent. frmrReceived - FRMR received. n200RetranTimeOut - retransmitLimit has been exceeded. other - unspecified state change reasons. The most likely reason for this is the transition from state waitingAck to state informationTransfer." ::= { mpanlSigLapfStatusEntry 2 } mpanlSigFrmrReceive OBJECT-TYPE SYNTAX HexString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the information field of the FRMR most recently received." ::= { mpanlSigLapfStatusEntry 3 } mpanlSigCurrentQueueSize OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the current number of frames in the SVC data link layer transmit queue." ::= { mpanlSigLapfStatusEntry 4 } mpanlSigLapfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistics for the SVC data link layer." ::= { mpanlSig 19 } mpanlSigLapfStatsEntry OBJECT-TYPE SYNTAX MpanlSigLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigLapfStatsTable." INDEX { mpanlIndex, mpanlSigIndex } ::= { mpanlSigLapfStatsTable 1 } MpanlSigLapfStatsEntry ::= SEQUENCE { mpanlSigStateChange Counter32, mpanlSigRemoteBusy Counter32, mpanlSigReceiveRejectFrame Counter32, mpanlSigAckTimeout Counter32, mpanlSigIFramesTransmitted Counter32, mpanlSigIFramesTxDiscarded Counter32, mpanlSigIFramesReceived Counter32, mpanlSigIFramesRcvdDiscarded Counter32 } mpanlSigStateChange OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the SVC data link layer interface has changed state. Frequent state changes may indicate a problem with the line quality. While the data link layer is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck and back. When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 1 } mpanlSigRemoteBusy OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 2 } mpanlSigReceiveRejectFrame OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of REJ frames received by the interface. When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 3 } mpanlSigAckTimeout OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate a problem at the link or improper values have been chosen for ackTimer and ackDelayTimer between the local and remote sides. When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 4 } mpanlSigIFramesTransmitted OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames transmitted to the interface on DLCI 0. An I-frame may be counted more than once if there are retransmissions at the SVC data link layer. When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 5 } mpanlSigIFramesTxDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames that are bound for the link but have been discarded. Discard reasons may be one of the following: 1. the frame length is beyond allow limit. 2. the SVC data link layer is in disconnected state. 3. the transmit queue has been purged because the queue length has reached the reset threshold. 4. the transmit queue or the queue waiting for acknowledgment has been purged because the link cannot be re-established. When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 6 } mpanlSigIFramesReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames received from the interface. When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 7 } mpanlSigIFramesRcvdDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames received but have been discarded. The discard reasons are: 1. incorrect frame size 2. frame is out of sequence 3. frame received while the network side of the SVC data link layer is not in the informationTransfer or waitingAck state. When this count reaches maximum, it wraps to zero." ::= { mpanlSigLapfStatsEntry 8 } -- Mpanl/ SignalingMpanl -- -- This component contains attributes relating to the MPANL -- signaling DLCI at the MPANL interface. This includes operational -- Q.922 (LAPF) information for this DLCI. mpanlSigMpanl OBJECT IDENTIFIER ::= { mpanl 7 } mpanlSigMpanlRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigMpanlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlSigMpanl components." ::= { mpanlSigMpanl 1 } mpanlSigMpanlRowStatusEntry OBJECT-TYPE SYNTAX MpanlSigMpanlRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlSigMpanl component." INDEX { mpanlIndex, mpanlSigMpanlIndex } ::= { mpanlSigMpanlRowStatusTable 1 } MpanlSigMpanlRowStatusEntry ::= SEQUENCE { mpanlSigMpanlRowStatus RowStatus, mpanlSigMpanlComponentName DisplayString, mpanlSigMpanlStorageType StorageType, mpanlSigMpanlIndex NonReplicated } mpanlSigMpanlRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlSigMpanl components. These components cannot be added nor deleted." ::= { mpanlSigMpanlRowStatusEntry 1 } mpanlSigMpanlComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlSigMpanlRowStatusEntry 2 } mpanlSigMpanlStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlSigMpanl tables." ::= { mpanlSigMpanlRowStatusEntry 4 } mpanlSigMpanlIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlSigMpanl tables." ::= { mpanlSigMpanlRowStatusEntry 10 } mpanlSigMpanlStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigMpanlStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mpanlSigMpanl 10 } mpanlSigMpanlStateEntry OBJECT-TYPE SYNTAX MpanlSigMpanlStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigMpanlStateTable." INDEX { mpanlIndex, mpanlSigMpanlIndex } ::= { mpanlSigMpanlStateTable 1 } MpanlSigMpanlStateEntry ::= SEQUENCE { mpanlSigMpanlAdminState INTEGER, mpanlSigMpanlOperationalState INTEGER, mpanlSigMpanlUsageState INTEGER } mpanlSigMpanlAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mpanlSigMpanlStateEntry 1 } mpanlSigMpanlOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mpanlSigMpanlStateEntry 2 } mpanlSigMpanlUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mpanlSigMpanlStateEntry 3 } mpanlSigMpanlProfileTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigMpanlProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes which are populated by the information received from the MPA in the Profile Association command of the MPANL protocol." ::= { mpanlSigMpanl 11 } mpanlSigMpanlProfileEntry OBJECT-TYPE SYNTAX MpanlSigMpanlProfileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigMpanlProfileTable." INDEX { mpanlIndex, mpanlSigMpanlIndex } ::= { mpanlSigMpanlProfileTable 1 } MpanlSigMpanlProfileEntry ::= SEQUENCE { mpanlSigMpanlDteCustomerId Unsigned32, mpanlSigMpanlDteNodeId Unsigned32, mpanlSigMpanlDteComponentName AsciiString, mpanlSigMpanlHighestDlci Unsigned32 } mpanlSigMpanlDteCustomerId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the Customer ID of the MPA connected to this Mpanl interface." ::= { mpanlSigMpanlProfileEntry 1 } mpanlSigMpanlDteNodeId OBJECT-TYPE SYNTAX Unsigned32 (1..4095) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the nodeId that uniquely identifies the MPA connected to this Mpanl interface." ::= { mpanlSigMpanlProfileEntry 2 } mpanlSigMpanlDteComponentName OBJECT-TYPE SYNTAX AsciiString (SIZE (1..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the component name provided by the MPA connected to this MPANL interface." ::= { mpanlSigMpanlProfileEntry 3 } mpanlSigMpanlHighestDlci OBJECT-TYPE SYNTAX Unsigned32 (0 | 17..1007) ACCESS read-only STATUS mandatory DESCRIPTION "This gives the highest DLCI that the Mpanl interface will assign to an SVC. This value is populated by information provided in the DLCI Range Information Element of the MPANL Profile Association command received from the MPA." ::= { mpanlSigMpanlProfileEntry 4 } mpanlSigMpanlStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigMpanlStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistics related to the Mpanl signaling layer at the interface level." ::= { mpanlSigMpanl 12 } mpanlSigMpanlStatsEntry OBJECT-TYPE SYNTAX MpanlSigMpanlStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigMpanlStatsTable." INDEX { mpanlIndex, mpanlSigMpanlIndex } ::= { mpanlSigMpanlStatsTable 1 } MpanlSigMpanlStatsEntry ::= SEQUENCE { mpanlSigMpanlProtocolErrors Counter32, mpanlSigMpanlSap0CommandsRx Counter32, mpanlSigMpanlSap0CommandsTx Counter32, mpanlSigMpanlSapXCommandsRx Counter32, mpanlSigMpanlSapXCommandsTx Counter32 } mpanlSigMpanlProtocolErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times an Mpanl protocol error has occurred. Any one of the following events constitutes a protocol error: 1. DNA association before profile association. 2. Mandatory IE absent in SAPcommands. 3. Invalid length of IE/sub-info fields in SAP command. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlStatsEntry 1 } mpanlSigMpanlSap0CommandsRx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SAP-0 commands received on the MPANL DLCI 16. This counter wraps to zero." ::= { mpanlSigMpanlStatsEntry 2 } mpanlSigMpanlSap0CommandsTx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SAP-0 commands sent on the MPANL DLCI 16. This counter wraps to zero." ::= { mpanlSigMpanlStatsEntry 3 } mpanlSigMpanlSapXCommandsRx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SAP-X commands received on the MPANL DLCI 16. This counter wraps to zero." ::= { mpanlSigMpanlStatsEntry 4 } mpanlSigMpanlSapXCommandsTx OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SAP-X commands sent on the MPANL DLCI 16. This counter wraps to zero." ::= { mpanlSigMpanlStatsEntry 5 } mpanlSigMpanlLapfStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigMpanlLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Q.922 SVC data link layer status." ::= { mpanlSigMpanl 13 } mpanlSigMpanlLapfStatusEntry OBJECT-TYPE SYNTAX MpanlSigMpanlLapfStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigMpanlLapfStatusTable." INDEX { mpanlIndex, mpanlSigMpanlIndex } ::= { mpanlSigMpanlLapfStatusTable 1 } MpanlSigMpanlLapfStatusEntry ::= SEQUENCE { mpanlSigMpanlCurrentState INTEGER, mpanlSigMpanlLastStateChangeReason INTEGER, mpanlSigMpanlFrmrReceive HexString, mpanlSigMpanlCurrentQueueSize Counter32 } mpanlSigMpanlCurrentState OBJECT-TYPE SYNTAX INTEGER { disconnected(1), linkSetup(2), disconnectRequest(4), informationTransfer(5), waitingAck(7) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the current state of the SVC data link layer interface." ::= { mpanlSigMpanlLapfStatusEntry 1 } mpanlSigMpanlLastStateChangeReason OBJECT-TYPE SYNTAX INTEGER { notStarted(1), abmeEntered(3), abmeReset(5), dmReceived(6), dmSent(7), discReceived(8), discSent(9), frmrReceived(10), n200RetranTimeOut(12), other(13) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the reason for the most recent state change. notStarted - this is the default state after SVC data link has just been created. abmeEntered - SVC data link has entered Asynchronous Balanced Mode after SABME or UA has been received. abmeReset - the data link has been reset. dmReceived - DM response received. dmSent - DM sent. discReceived - DISC response received. discSent - DISC sent. frmrReceived - FRMR received. n200RetranTimeOut - retransmitLimit has been exceeded. other - unspecified state change reasons. The most likely reason for this is the transition from state waitingAck to state informationTransfer." ::= { mpanlSigMpanlLapfStatusEntry 2 } mpanlSigMpanlFrmrReceive OBJECT-TYPE SYNTAX HexString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the information field of the FRMR most recently received." ::= { mpanlSigMpanlLapfStatusEntry 3 } mpanlSigMpanlCurrentQueueSize OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute shows the current number of frames in the SVC data link layer transmit queue." ::= { mpanlSigMpanlLapfStatusEntry 4 } mpanlSigMpanlLapfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlSigMpanlLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the statistics for the SVC data link layer." ::= { mpanlSigMpanl 14 } mpanlSigMpanlLapfStatsEntry OBJECT-TYPE SYNTAX MpanlSigMpanlLapfStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlSigMpanlLapfStatsTable." INDEX { mpanlIndex, mpanlSigMpanlIndex } ::= { mpanlSigMpanlLapfStatsTable 1 } MpanlSigMpanlLapfStatsEntry ::= SEQUENCE { mpanlSigMpanlStateChange Counter32, mpanlSigMpanlRemoteBusy Counter32, mpanlSigMpanlReceiveRejectFrame Counter32, mpanlSigMpanlAckTimeout Counter32, mpanlSigMpanlIFramesTransmitted Counter32, mpanlSigMpanlIFramesTxDiscarded Counter32, mpanlSigMpanlIFramesReceived Counter32, mpanlSigMpanlIFramesRcvdDiscarded Counter32 } mpanlSigMpanlStateChange OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the SVC data link layer interface has changed state. Frequent state changes may indicate a problem with the line quality. While the data link layer is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck and back. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 1 } mpanlSigMpanlRemoteBusy OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 2 } mpanlSigMpanlReceiveRejectFrame OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of REJ frames received by the interface. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 3 } mpanlSigMpanlAckTimeout OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate a problem at the link or improper values have been chosen for ackTimer and ackDelayTimer between the local and remote sides. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 4 } mpanlSigMpanlIFramesTransmitted OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames transmitted to the interface on DLCI 0. An I-frame may be counted more than once if there are retransmissions at the SVC data link layer. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 5 } mpanlSigMpanlIFramesTxDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames that are bound for the link but have been discarded. Discard reasons may be one of the following: 1. the frame length is beyond allow limit. 2. the SVC data link layer is in disconnected state. 3. the transmit queue has been purged because the queue length has reached the reset threshold. 4. the transmit queue or the queue waiting for acknowledgment has been purged because the link cannot be re-established. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 6 } mpanlSigMpanlIFramesReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames received from the interface. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 7 } mpanlSigMpanlIFramesRcvdDiscarded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the number of SVC I-frames received but have been discarded. The discard reasons are: 1. incorrect frame size 2. frame is out of sequence 3. frame received while the network side of the SVC data link layer is not in the informationTransfer or waitingAck state. When this count reaches maximum, it wraps to zero." ::= { mpanlSigMpanlLapfStatsEntry 8 } -- Mpanl/n Lmi -- This component defines the parameters for implementing the Local -- Management Interface protocol. mpanlLmi OBJECT IDENTIFIER ::= { mpanl 8 } mpanlLmiRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlLmiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlLmi components." ::= { mpanlLmi 1 } mpanlLmiRowStatusEntry OBJECT-TYPE SYNTAX MpanlLmiRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlLmi component." INDEX { mpanlIndex, mpanlLmiIndex } ::= { mpanlLmiRowStatusTable 1 } MpanlLmiRowStatusEntry ::= SEQUENCE { mpanlLmiRowStatus RowStatus, mpanlLmiComponentName DisplayString, mpanlLmiStorageType StorageType, mpanlLmiIndex NonReplicated } mpanlLmiRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlLmi components. These components cannot be added nor deleted." ::= { mpanlLmiRowStatusEntry 1 } mpanlLmiComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlLmiRowStatusEntry 2 } mpanlLmiStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlLmi tables." ::= { mpanlLmiRowStatusEntry 4 } mpanlLmiIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlLmi tables." ::= { mpanlLmiRowStatusEntry 10 } mpanlLmiParmsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlLmiParmsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Local Management Interface component." ::= { mpanlLmi 10 } mpanlLmiParmsEntry OBJECT-TYPE SYNTAX MpanlLmiParmsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlLmiParmsTable." INDEX { mpanlIndex, mpanlLmiIndex } ::= { mpanlLmiParmsTable 1 } MpanlLmiParmsEntry ::= SEQUENCE { mpanlLmiProcedures INTEGER } mpanlLmiProcedures OBJECT-TYPE SYNTAX INTEGER { none(0), vendorForum(1), ansi(2), ccitt(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute selects the procedures to be used for the Local Management Interface. For the MPANL service this attribute is always set to none. none : no Local Management Interface procedures are running on this interface. This accomodates MPANL user equipment that have not implemented any LMI procedures. The remaining attributes of this group will be ignored. vendorForum : Local Management Interface procedures from the Vendor Forum specification are supported on this interface. DLCI 1023 is used for the LMI protocol. ansi: Local Management Interface procedures from the ANSI specification are supported. DLCI 0 is used for the LMI protocol. ccitt: Local Management Interface procedures from the CCITT specification are supported. DLCI 0 is used for the LMI protocol." DEFVAL { none } ::= { mpanlLmiParmsEntry 1 } mpanlLmiStateTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlLmiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { mpanlLmi 12 } mpanlLmiStateEntry OBJECT-TYPE SYNTAX MpanlLmiStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlLmiStateTable." INDEX { mpanlIndex, mpanlLmiIndex } ::= { mpanlLmiStateTable 1 } MpanlLmiStateEntry ::= SEQUENCE { mpanlLmiAdminState INTEGER, mpanlLmiOperationalState INTEGER, mpanlLmiUsageState INTEGER } mpanlLmiAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { mpanlLmiStateEntry 1 } mpanlLmiOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { mpanlLmiStateEntry 2 } mpanlLmiUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { mpanlLmiStateEntry 3 } -- Mpanl/n VoiceOverFrameRelay -- This component, when provisioned, provides VoFr link layer -- framing capability to the containing Mpanl instance. mpanlVoFr OBJECT IDENTIFIER ::= { mpanl 18 } mpanlVoFrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlVoFrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlVoFr components." ::= { mpanlVoFr 1 } mpanlVoFrRowStatusEntry OBJECT-TYPE SYNTAX MpanlVoFrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlVoFr component." INDEX { mpanlIndex, mpanlVoFrIndex } ::= { mpanlVoFrRowStatusTable 1 } MpanlVoFrRowStatusEntry ::= SEQUENCE { mpanlVoFrRowStatus RowStatus, mpanlVoFrComponentName DisplayString, mpanlVoFrStorageType StorageType, mpanlVoFrIndex NonReplicated } mpanlVoFrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlVoFr components. These components cannot be added nor deleted." ::= { mpanlVoFrRowStatusEntry 1 } mpanlVoFrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlVoFrRowStatusEntry 2 } mpanlVoFrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlVoFr tables." ::= { mpanlVoFrRowStatusEntry 4 } mpanlVoFrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlVoFr tables." ::= { mpanlVoFrRowStatusEntry 10 } mpanlVoFrOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlVoFrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains operational attributes of the VoFr component." ::= { mpanlVoFr 10 } mpanlVoFrOperEntry OBJECT-TYPE SYNTAX MpanlVoFrOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlVoFrOperTable." INDEX { mpanlIndex, mpanlVoFrIndex } ::= { mpanlVoFrOperTable 1 } MpanlVoFrOperEntry ::= SEQUENCE { mpanlVoFrMaximumFrameSize Counter32, mpanlVoFrTransmitInformationRate Counter32 } mpanlVoFrMaximumFrameSize OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum size of VoFr frames transmitted to MPA. The size excludes HDLC flags and CRC octets. MPA signals the required value as part of the MPANL initial staging, which is then used to set the value of this attribute. Default value is used before MPANL staging is completed." ::= { mpanlVoFrOperEntry 1 } mpanlVoFrTransmitInformationRate OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum information rate towards MPA. Value may change over time, as signalled by MPA. Default value is used before MPANL staging is completed." ::= { mpanlVoFrOperEntry 2 } mpanlVoFrStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlVoFrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains statistics attributes of the VoFr component." ::= { mpanlVoFr 11 } mpanlVoFrStatsEntry OBJECT-TYPE SYNTAX MpanlVoFrStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlVoFrStatsTable." INDEX { mpanlIndex, mpanlVoFrIndex } ::= { mpanlVoFrStatsTable 1 } MpanlVoFrStatsEntry ::= SEQUENCE { mpanlVoFrFragmentedHighestPriorityFrames Counter32, mpanlVoFrLostFragmentsFromIf Counter32, mpanlVoFrProtocolViolationsFromIf Counter32 } mpanlVoFrFragmentedHighestPriorityFrames OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts egress frames with the highest priority, which had to be fragmented because they were larger than maximumFrameSize. This could happen when a data call is setup to use the highest emission priority, or MPA is provisioned with too low maximum frame size. When the maximum is reached the count wraps to zero." ::= { mpanlVoFrStatsEntry 1 } mpanlVoFrLostFragmentsFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts lost VoFr fragments from the interface. Presence of lost fragments indicates a link problem. Note that lost whole frames cannot be detected. When the maximum is reached the count wraps to zero." ::= { mpanlVoFrStatsEntry 5 } mpanlVoFrProtocolViolationsFromIf OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts VoFr protocol violations detected in the data from the interface. When the maximum is reached the count wraps to zero." ::= { mpanlVoFrStatsEntry 6 } -- Mpanl/n FrMuxSetup -- This component contains operational attributes for egress traffic -- shaping as well as the component name of the FrMux Dlci to which -- this Mpanl/n is associated. mpanlFrMuxSetup OBJECT IDENTIFIER ::= { mpanl 19 } mpanlFrMuxSetupRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFrMuxSetupRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlFrMuxSetup components." ::= { mpanlFrMuxSetup 1 } mpanlFrMuxSetupRowStatusEntry OBJECT-TYPE SYNTAX MpanlFrMuxSetupRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlFrMuxSetup component." INDEX { mpanlIndex, mpanlFrMuxSetupIndex } ::= { mpanlFrMuxSetupRowStatusTable 1 } MpanlFrMuxSetupRowStatusEntry ::= SEQUENCE { mpanlFrMuxSetupRowStatus RowStatus, mpanlFrMuxSetupComponentName DisplayString, mpanlFrMuxSetupStorageType StorageType, mpanlFrMuxSetupIndex NonReplicated } mpanlFrMuxSetupRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlFrMuxSetup components. These components can be added and deleted." ::= { mpanlFrMuxSetupRowStatusEntry 1 } mpanlFrMuxSetupComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlFrMuxSetupRowStatusEntry 2 } mpanlFrMuxSetupStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlFrMuxSetup tables." ::= { mpanlFrMuxSetupRowStatusEntry 4 } mpanlFrMuxSetupIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlFrMuxSetup tables." ::= { mpanlFrMuxSetupRowStatusEntry 10 } mpanlFrMuxSetupOpTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFrMuxSetupOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the following operational parameters: committedInformationRate of the PVC connection used for tunnelling the MPANL traffic, and the component name of the Dlci which carries the traffic for this MPANL." ::= { mpanlFrMuxSetup 11 } mpanlFrMuxSetupOpEntry OBJECT-TYPE SYNTAX MpanlFrMuxSetupOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFrMuxSetupOpTable." INDEX { mpanlIndex, mpanlFrMuxSetupIndex } ::= { mpanlFrMuxSetupOpTable 1 } MpanlFrMuxSetupOpEntry ::= SEQUENCE { mpanlFrMuxSetupCommittedInformationRate Unsigned32, mpanlFrMuxSetupDlciCompName RowPointer } mpanlFrMuxSetupCommittedInformationRate OBJECT-TYPE SYNTAX Unsigned32 (16000..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies, in bit/s, the committed information rate (CIR) to which the traffic transmitted towards the interface is shaped." DEFVAL { 16000 } ::= { mpanlFrMuxSetupOpEntry 1 } mpanlFrMuxSetupDlciCompName OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the component name of the Dlci with which the application using this FrMuxSetup component is associated. The name is a string FrMux/n Dlci/m. For a PVC this is the same component name as provisioned under the subcomponent FrMuxPvcSetup." ::= { mpanlFrMuxSetupOpEntry 2 } -- Mpanl/n FrMuxSetup PvcSetup -- This component contains provisionable attributes for setting up a -- Dlci associated with the application using this component. The Dlci -- is of a PVC type. mpanlFrMuxSetupPvcSetup OBJECT IDENTIFIER ::= { mpanlFrMuxSetup 2 } mpanlFrMuxSetupPvcSetupRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFrMuxSetupPvcSetupRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlFrMuxSetupPvcSetup components." ::= { mpanlFrMuxSetupPvcSetup 1 } mpanlFrMuxSetupPvcSetupRowStatusEntry OBJECT-TYPE SYNTAX MpanlFrMuxSetupPvcSetupRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlFrMuxSetupPvcSetup component." INDEX { mpanlIndex, mpanlFrMuxSetupIndex, mpanlFrMuxSetupPvcSetupIndex } ::= { mpanlFrMuxSetupPvcSetupRowStatusTable 1 } MpanlFrMuxSetupPvcSetupRowStatusEntry ::= SEQUENCE { mpanlFrMuxSetupPvcSetupRowStatus RowStatus, mpanlFrMuxSetupPvcSetupComponentName DisplayString, mpanlFrMuxSetupPvcSetupStorageType StorageType, mpanlFrMuxSetupPvcSetupIndex NonReplicated } mpanlFrMuxSetupPvcSetupRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlFrMuxSetupPvcSetup components. These components cannot be added nor deleted." ::= { mpanlFrMuxSetupPvcSetupRowStatusEntry 1 } mpanlFrMuxSetupPvcSetupComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlFrMuxSetupPvcSetupRowStatusEntry 2 } mpanlFrMuxSetupPvcSetupStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlFrMuxSetupPvcSetup tables." ::= { mpanlFrMuxSetupPvcSetupRowStatusEntry 4 } mpanlFrMuxSetupPvcSetupIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlFrMuxSetupPvcSetup tables." ::= { mpanlFrMuxSetupPvcSetupRowStatusEntry 10 } mpanlFrMuxSetupPvcSetupProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlFrMuxSetupPvcSetupProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes for setting up a Dlci associated with the application using the FrMuxSetup component. The Dlci is of the PVC type." ::= { mpanlFrMuxSetupPvcSetup 10 } mpanlFrMuxSetupPvcSetupProvEntry OBJECT-TYPE SYNTAX MpanlFrMuxSetupPvcSetupProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlFrMuxSetupPvcSetupProvTable." INDEX { mpanlIndex, mpanlFrMuxSetupIndex, mpanlFrMuxSetupPvcSetupIndex } ::= { mpanlFrMuxSetupPvcSetupProvTable 1 } MpanlFrMuxSetupPvcSetupProvEntry ::= SEQUENCE { mpanlFrMuxSetupPvcSetupDlciName Link } mpanlFrMuxSetupPvcSetupDlciName OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the link to the Dlci which is associated with the application using the FrMuxSetup component." ::= { mpanlFrMuxSetupPvcSetupProvEntry 1 } -- Mpanl/n Isdn -- This component defines the parameters associated with the ISDN B- -- Channel interface. Adding this component makes the Mpanl -- behave as an ISDN access to the MPA. mpanlIsdn OBJECT IDENTIFIER ::= { mpanl 22 } mpanlIsdnRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlIsdnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of mpanlIsdn components." ::= { mpanlIsdn 1 } mpanlIsdnRowStatusEntry OBJECT-TYPE SYNTAX MpanlIsdnRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single mpanlIsdn component." INDEX { mpanlIndex, mpanlIsdnIndex } ::= { mpanlIsdnRowStatusTable 1 } MpanlIsdnRowStatusEntry ::= SEQUENCE { mpanlIsdnRowStatus RowStatus, mpanlIsdnComponentName DisplayString, mpanlIsdnStorageType StorageType, mpanlIsdnIndex NonReplicated } mpanlIsdnRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of mpanlIsdn components. These components can be added and deleted." ::= { mpanlIsdnRowStatusEntry 1 } mpanlIsdnComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { mpanlIsdnRowStatusEntry 2 } mpanlIsdnStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the mpanlIsdn tables." ::= { mpanlIsdnRowStatusEntry 4 } mpanlIsdnIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the mpanlIsdn tables." ::= { mpanlIsdnRowStatusEntry 10 } mpanlIsdnProvTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlIsdnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes of the Isdn component." ::= { mpanlIsdn 11 } mpanlIsdnProvEntry OBJECT-TYPE SYNTAX MpanlIsdnProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlIsdnProvTable." INDEX { mpanlIndex, mpanlIsdnIndex } ::= { mpanlIsdnProvTable 1 } MpanlIsdnProvEntry ::= SEQUENCE { mpanlIsdnT320 Unsigned32, mpanlIsdnAddressSignalling INTEGER } mpanlIsdnT320 OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the waiting time for a silent B-Channel (no active VCs associated with the Mpanl) to be disconnected and made available. Default is 60 seconds. 0 means t320 will never timeout." DEFVAL { 60 } ::= { mpanlIsdnProvEntry 1 } mpanlIsdnAddressSignalling OBJECT-TYPE SYNTAX INTEGER { isdnDna(0), normalBehavior(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute defines whether the ISDN Calling Party Number is to be signalled to the remote DTE during an SVC call establishment. Otherwise, no changes to the current behavior of SVC call establishement (i.e., Passport Dna is used in the calling party number information element)." DEFVAL { normalBehavior } ::= { mpanlIsdnProvEntry 2 } mpanlIsdnOperTable OBJECT-TYPE SYNTAX SEQUENCE OF MpanlIsdnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes of the Isdn component." ::= { mpanlIsdn 12 } mpanlIsdnOperEntry OBJECT-TYPE SYNTAX MpanlIsdnOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the mpanlIsdnOperTable." INDEX { mpanlIndex, mpanlIsdnIndex } ::= { mpanlIsdnOperTable 1 } MpanlIsdnOperEntry ::= SEQUENCE { mpanlIsdnDataSigChan INTEGER, mpanlIsdnBChannelState INTEGER, mpanlIsdnLastUsedCgpn DigitString, mpanlIsdnBChanIntState INTEGER, mpanlIsdnActiveVirtualCircuitsCount Counter32 } mpanlIsdnDataSigChan OBJECT-TYPE SYNTAX INTEGER (1..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the instance number of the dataSigChan component controlling the allocation of this Mpanl Isdn component." ::= { mpanlIsdnOperEntry 1 } mpanlIsdnBChannelState OBJECT-TYPE SYNTAX INTEGER { idle(0), busy(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the state of the B-Channel. If the value is idle it means that no VCs are connected and this B-Channel is available. If the value is busy it means this B-Channel has been allocated and is not available. If the value is disabled it means the application interface or the port is locked or disabled." ::= { mpanlIsdnOperEntry 2 } mpanlIsdnLastUsedCgpn OBJECT-TYPE SYNTAX DigitString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the calling party number currently using the B-Channel. When the B-Channel is free, the null string is displayed." ::= { mpanlIsdnOperEntry 3 } mpanlIsdnBChanIntState OBJECT-TYPE SYNTAX INTEGER { isdnInit(0), waitAccEnable(1), waitLnsResponse(2), waitFramerData(3), enabling(4), waitAccRegAck(5), up(6), down(7), releasing(8) } ACCESS read-only STATUS mandatory DESCRIPTION "Debug information" ::= { mpanlIsdnOperEntry 4 } mpanlIsdnActiveVirtualCircuitsCount OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "Current number of virtual circuits (switched and permanent) in data transfer." ::= { mpanlIsdnOperEntry 5 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { mpanlDlciJvcCalledAddress, -- mpanlDlciAlarmStatus, -- mpanlDlciVcPriority, -- mpanlDlciVcPathReliability, -- mpanlDlciVcCannotForwardToSubnet, -- mpanlDlciAccounting, -- mpanlSigMpanlFrmrReceive, -- mpanlAvailabilityStatus, -- mpanlVoFrMaximumFrameSize, -- mpanlDlciVcCallReferenceNumber, -- mpanlDlciFciFromSubnet, -- mpanlSigMpanlSap0CommandsRx, -- mpanlVoFrRowStatus, -- mpanlSigAckDelayTimer, -- mpanlSigCurrentState, -- mpanlRoundTripDelay, -- mpanlDlciElapsedDifference, -- mpanlDnaRowStatus, -- mpanlDlciDiscCongestedToIfBytes, -- mpanlSigProtocolErrors, -- mpanlSigLastDlciReceivedStatus, -- mpanlFramerFlagsBetweenFrames, -- mpanlDlciLbRowStatus, -- mpanlSigMpanlDteCustomerId, -- mpanlDlciLCoSetupPriority, -- mpanlSigAckTimer, -- mpanlDlciDiscDeCongestedToIf, -- mpanlDlciTransferPriToNwk, -- mpanlDnaComponentName, -- mpanlOctetFromIf, -- mpanlDnaServiceExchange, -- mpanlDlciVcStorageType, -- mpanlDlciLCoRowStatus, -- mpanlDlciLCoRequiredTrafficType, -- mpanlIsdnStorageType, -- mpanlDlciFecnFrmToIf, -- mpanlSigLastTimeMsgBlockCongested, -- mpanlDlciLCoPathUpDateTime, -- mpanlDlciABitStatusFromIf, -- mpanlDlciLCoCostMetric, -- mpanlDlciLCoCallReferenceNumber, -- mpanlDlciLbRemoteFecnFrm, -- mpanlDlciLCoBumpPreference, -- mpanlSigLastStateInStatusMsgReceived, -- mpanlDlciDiscardedBytes, -- mpanlDlciVcElapsedTimeTillNow, -- mpanlDlciComponentName, -- mpanlProceduralStatus, -- mpanlSigIFramesTxDiscarded, -- mpanlOctetToIfByQueueValue, -- mpanlSigOutCallsFailed, -- mpanlDlciJvcPreviousState, -- mpanlDlciABitReasonFromIf, -- mpanlDlciJvcPacketsToSubnet, -- mpanlFramerComponentName, -- mpanlDlciLbLocalDeBytes, -- mpanlLmiAdminState, -- mpanlDlciDeBytesFromIf, -- mpanlDlciEirIngressSegFrm, -- mpanlIfAdminStatus, -- mpanlDlciDiscCongestedFromIf, -- mpanlDlciLbLocalDeFrm, -- mpanlDlciDeFrmFromIf, -- mpanlDlciVcPreviousDiagnosticCode, -- mpanlFrmToIf, -- mpanlDlciVcEmissionPriorityFromNetwork, -- mpanlSigCurrentQueueSize, -- mpanlDlciLCoReasonForNoRoute, -- mpanlVoFrFragmentedHighestPriorityFrames, -- mpanlDlciLCoLastTearDownReason, -- mpanlSigQualityOfServiceNotAvailable, -- mpanlDlciLCoRequiredSecurity, -- mpanlFramerLrcErrors, -- mpanlDlciVcCallingDna, -- mpanlDlciExcessBytesFromIf, -- mpanlIsdnBChannelState, -- mpanlDlciVcPeakOoSeqFrmForwarded, -- mpanlDlciVcFrmCongestedToSubnet, -- mpanlDlciExcessFrmFromIf, -- mpanlSigMpanlRemoteBusy, -- mpanlDlciJvcCalledLcn, -- mpanlSigMpanlIFramesTxDiscarded, -- mpanlSigMpanlRowStatus, -- mpanlDlciLbLocalTotalFrm, -- mpanlDlciAvailabilityStatus, -- mpanlSigComponentName, -- mpanlSigIFramesRcvdDiscarded, -- mpanlDlciLbRemoteTotalBytes, -- mpanlDlciBytesFromIf, -- mpanlDlciBecnFrmToIf, -- mpanlDlciLCoRoundTripDelay, -- mpanlDlciVcNotDataXferFromSubnet, -- mpanlDlciLbRemoteTotalFrm, -- mpanlDlciFrmFromIf, -- mpanlComponentName, -- mpanlDlciLbRemoteBecnFrm, -- mpanlCommentText, -- mpanlIsdnBChanIntState, -- mpanlDlciLCoEnd, -- mpanlLmiComponentName, -- mpanlSigSetupTimeout, -- mpanlLastUnknownDlci, -- mpanlFramerFrmFromIf, -- mpanlDlciVcRcosFromNetwork, -- mpanlDlciLCoHoldingPriority, -- mpanlUnknownStatus, -- mpanlStandbyStatus, -- mpanlLmiProcedures, -- mpanlDlciLCoPathFailureAction, -- mpanlDlciVcDuplicatesFromSubnet, -- mpanlStorageType, -- mpanlDlciControlStatus, -- mpanlSigLastStateChangeReason, -- mpanlSigMpanlDteNodeId, -- mpanlSigRetransmitLimit, -- mpanlDlciJvcProtocolErrors, -- mpanlDlciLCoPktsFromNetwork, -- mpanlDlciTotalIngressSegFrm, -- mpanlDlciQ933CallState, -- mpanlDlciJvcPacketsDiscarded, -- mpanlSigAckTimeout, -- mpanlDlciRowStatus, -- mpanlDlciJvcCallingAddress, -- mpanlDlciVcOoSeqByteCntExceeded, -- mpanlFrMuxSetupPvcSetupComponentName, -- mpanlFramerRowStatus, -- mpanlDlciErrorLongBytesFromIf, -- mpanlAdminState, -- mpanlDlciVcPktRetryTimeouts, -- mpanlDlciMaximumFrameSize, -- mpanlDlciErrorLongFrmFromIf, -- mpanlDlciVcCalledDna, -- mpanlDlciUsageState, -- mpanlOctetToIf, -- mpanlDlciVcAccountingEnd, -- mpanlCustomerIdentifier, -- mpanlSigMpanlOperationalState, -- mpanlSigInCalls, -- mpanlFrMuxSetupRowStatus, -- mpanlFramerUsageState, -- mpanlSigMpanlReceiveRejectFrame, -- mpanlDlciVcSubnetRecoveries, -- mpanlFramerNormPrioLinkUtilFromIf, -- mpanlDlciTotalEgressSegFrm, -- mpanlSigAdminState, -- mpanlFrMuxSetupStorageType, -- mpanlSigWindowSize, -- mpanlDlciOperationalState, -- mpanlDlciBciFromSubnet, -- mpanlFramerInterfaceName, -- mpanlDlciDiscExcessFromIfBytes, -- mpanlDlciVcSegmentSize, -- mpanlDlciLoopbackState, -- mpanlUnknownDlciFramesFromIf, -- mpanlSigUsageState, -- mpanlFramerOperationalState, -- mpanlFrMuxSetupComponentName, -- mpanlSigFrmrReceive, -- mpanlVoFrProtocolViolationsFromIf, -- mpanlFrMuxSetupPvcSetupDlciName, -- mpanlDlciVcFastSelectCall, -- mpanlFramerFrmModeErrors, -- mpanlDlciVcCalledLcn, -- mpanlDlciLCoRequiredCustomerParameter, -- mpanlDlciEirEgressSegFrm, -- mpanlDlciJvcCallingLcn, -- mpanlIsdnComponentName, -- mpanlDlciVcComponentName, -- mpanlSigDefaultAccounting, -- mpanlDlciBecnFrmSetByService, -- mpanlDlciVcMaxSubnetPktSize, -- mpanlPrefixDnaStorageType, -- mpanlSigCallProceedingTimer, -- mpanlIsdnDataSigChan, -- mpanlDnaStorageType, -- mpanlDlciVcOutOfRangeFrmFromSubnet, -- mpanlDlciStartTime, -- mpanlLmiRowStatus, -- mpanlDlciLbStorageType, -- mpanlFramerAborts, -- mpanlDlciBecnFrmFromIf, -- mpanlDlciABitStatusToIf, -- mpanlDlciEmissionPriorityToIf, -- mpanlDlciVcType, -- mpanlDlciVcSendSequenceNumber, -- mpanlSigMpanlSapXCommandsTx, -- mpanlDlciLCoPathFailureCount, -- mpanlDlciJvcCurrentState, -- mpanlSigReceiveRejectFrame, -- mpanlIsdnRowStatus, -- mpanlLmiUsageState, -- mpanlSigOperationalState, -- mpanlDnaEgressAccounting, -- mpanlDlciLCoCalledDna, -- mpanlAlarmStatus, -- mpanlDlciABitReasonToIf, -- mpanlDlciLCoStorageType, -- mpanlSigMpanlUsageState, -- mpanlSigMpanlAckTimeout, -- mpanlDlciDiscFrameAbit, -- mpanlVoFrStorageType, -- mpanlFrMuxSetupPvcSetupRowStatus, -- mpanlDlciBciToSubnet, -- mpanlDlciDiscCongestedToIf, -- mpanlSigRemoteBusy, -- mpanlDlciDeFrmToIf, -- mpanlDlciLCoOptimization, -- mpanlDlciLbRemoteDeBytes, -- mpanlDlciVcEmissionPriorityToNetwork, -- mpanlDlciLCoElapsedTimeTillNow, -- mpanlSigNetworkType, -- mpanlDlciVcPeakOoSeqByteCount, -- mpanlFramerOctetFromIf, -- mpanlDlciLbRemoteDeFrm, -- mpanlDlciDiscDeCongestedFromIfBytes, -- mpanlDlciDiscByteAbit, -- mpanlLmiOperationalState, -- mpanlDlciTotalIngressBytes, -- mpanlDlciProceduralStatus, -- mpanlVoFrLostFragmentsFromIf, -- mpanlSigMpanlCurrentState, -- mpanlSigInCallsRefused, -- mpanlFramerOverruns, -- mpanlDlciLCoRetryCount, -- mpanlDlciLCoEmissionPriority, -- mpanlDlciJvcCalledNpi, -- mpanlDlciVcCalledNpi, -- mpanlSigCurrentNumberOfSvcCalls, -- mpanlDlciTotalEgressBytes, -- mpanlDlciBytesToIf, -- mpanlSigLastDlciWithMsgBlockCongestion, -- mpanlIsdnAddressSignalling, -- mpanlNumberOfEmissionQs, -- mpanlSigDisconnectTimer, -- mpanlDlciFrmToIf, -- mpanlSigMpanlCurrentQueueSize, -- mpanlSigMpanlIFramesRcvdDiscarded, -- mpanlDlciLCoCallingDna, -- mpanlDlciVcAccountingEnabled, -- mpanlDlciVcRowStatus, -- mpanlDlciLCoDiscardPriority, -- mpanlDlciVcPeakOoSeqPktCount, -- mpanlDlciDiscCongestedFromIfBytes, -- mpanlSigStateChange, -- mpanlFramerCrcErrors, -- mpanlFramerFrmToIf, -- mpanlDlciVcRcosToNetwork, -- mpanlDlciEirIngressBytes, -- mpanlSigMpanlHighestDlci, -- mpanlDlciVcNotDataXferToSubnet, -- mpanlSigMpanlSapXCommandsRx, -- mpanlDlciTransferPriFromNwk, -- mpanlPrefixDnaComponentName, -- mpanlSigMpanlSap0CommandsTx, -- mpanlDlciLCoPktsToNetwork, -- mpanlDlciJvcComponentName, -- mpanlDlciVcCombErrorsFromSubnet, -- mpanlSigMpanlStateChange, -- mpanlSigIFramesReceived, -- mpanlDlciEirEgressBytes, -- mpanlInvalidHeaderFramesFromIf, -- mpanlDlciLbLocalFecnFrm, -- mpanlDlciJvcStorageType, -- mpanlDlciFecnFrmFromIf, -- mpanlDlciVcSegmentsRx, -- mpanlSigMpanlProtocolErrors, -- mpanlFrMuxSetupDlciCompName, -- mpanlSigReleaseTimer, -- mpanlSigStorageType, -- mpanlDnaDefaultTransferPriority, -- mpanlIsdnT320, -- mpanlDlciLCoRequiredTxBandwidth, -- mpanlSigMpanlDteComponentName, -- mpanlDlciUnknownStatus, -- mpanlDlciStandbyStatus, -- mpanlSigIdleProbeTimer, -- mpanlDlciLCoBytesFromNetwork, -- mpanlSigMpanlIFramesReceived, -- mpanlDlciStorageType, -- mpanlDlciVcDmepValue, -- mpanlIfIndex, -- mpanlFramerNormPrioLinkUtilToIf, -- mpanlDlciVcDataPath, -- mpanlDlciLCoCalledNpi, -- mpanlSigOutCalls, -- mpanlFramerStorageType, -- mpanlSigMpanlLastStateChangeReason, -- mpanlDlciErrorShortFrmFromIf, -- mpanlFrmFromIf, -- mpanlDlciCommittedBurstSize, -- mpanlDlciVcStartTime, -- mpanlDlciQ933CallReference, -- mpanlDlciAdminState, -- mpanlSigMpanlStorageType, -- mpanlDlciVcDiagnosticCode, -- mpanlDlciLCoRequiredRxBandwidth, -- mpanlSigMpanlComponentName, -- mpanlDlciLCoPermittedTrunkTypes, -- mpanlDlciVcCallingNpi, -- mpanlLmiStorageType, -- mpanlIsdnLastUsedCgpn, -- mpanlFramerAdminState, -- mpanlDlciVcCallingLcn, -- mpanlDlciCallReferenceNumber, -- mpanlDnaAccountClass, -- mpanlFrMuxSetupCommittedInformationRate, -- mpanlDlciLbLocalTotalBytes, -- mpanlControlStatus, -- mpanlFramerLargeFrmErrors, -- mpanlFrmToIfByQueueValue, -- mpanlDlciLbComponentName, -- mpanlDlciDiscardedSegFrm, -- mpanlVoFrTransmitInformationRate, -- mpanlDlciLCoDelayMetric, -- mpanlDlciLbLocalBecnFrm, -- mpanlDlciVcState, -- mpanlRowStatus, -- mpanlSnmpOperStatus, -- mpanlDlciVcFrmLossTimeouts, -- mpanlDlciVcSegmentsSent, -- mpanlDlciJvcRowStatus, -- mpanlFramerNonOctetErrors, -- mpanlSigRowStatus, -- mpanlDlciLCoComponentName, -- mpanlDlciVcPreviousState, -- mpanlVoFrComponentName, -- mpanlPrefixDnaRowStatus, -- mpanlSigCallSetupTimer, -- mpanlDlciVcOoSeqPktCntExceeded, -- mpanlDlciVcPeakRetryQueueSize, -- mpanlDlciDeBytesToIf, -- mpanlUsageState, -- mpanlDlciLCoCallingNpi, -- mpanlFramerUnderruns, -- mpanlSigIFramesTransmitted, -- mpanlIsdnActiveVirtualCircuitsCount, -- mpanlDlciLCoBytesToNetwork, -- mpanlDlciDiscExcessFromIf, -- mpanlDlciExcessBurstSize, -- mpanlSigLastCauseInStatusMsgReceived, -- mpanlDlciDiscDeCongestedFromIf, -- mpanlOperationalState, -- mpanlDlciLCoPathValue, -- mpanlSigLastQ933StateReceivedStatus, -- mpanlDlciDiscDeCongestedToIfBytes, -- mpanlDlciJvcCallingNpi, -- mpanlDnaAccountCollection, -- mpanlSigMpanlIFramesTransmitted, -- mpanlDlciLCoState, -- mpanlSigMpanlAdminState, -- mpanlDlciJvcPacketsFromSubnet, -- mpanlFrMuxSetupPvcSetupStorageType } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." mpaNetworkLinkGroup OBJECT IDENTIFIER ::= { mpaNetworkLinkMIB 1 } mpaNetworkLinkGroupBE OBJECT IDENTIFIER ::= { mpaNetworkLinkGroup 5 } mpaNetworkLinkGroupBE01 OBJECT IDENTIFIER ::= { mpaNetworkLinkGroupBE 2 } mpaNetworkLinkGroupBE01A OBJECT IDENTIFIER ::= { mpaNetworkLinkGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 MpaNetworkLink." -- STATUS mandatory -- DESCRIPTION "MpaNetworkLink MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-MpaNetworkLinkMIB -- INCLUDES { mpaNetworkLinkGroupBE01A } mpaNetworkLinkCapabilities OBJECT IDENTIFIER ::= { mpaNetworkLinkMIB 3 } mpaNetworkLinkCapabilitiesBE OBJECT IDENTIFIER ::= { mpaNetworkLinkCapabilities 5 } mpaNetworkLinkCapabilitiesBE01 OBJECT IDENTIFIER ::= { mpaNetworkLinkCapabilitiesBE 2 } mpaNetworkLinkCapabilitiesBE01A OBJECT IDENTIFIER ::= { mpaNetworkLinkCapabilitiesBE01 2 } END