Nortel-Magellan-Passport-FrameRelayEngMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB DisplayString, StorageType, RowStatus, Gauge32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB NonReplicated FROM Nortel-Magellan-Passport-TextualConventionsMIB lpIndex, lpEngIndex, lpEng FROM Nortel-Magellan-Passport-LogicalProcessorMIB; -- LAST-UPDATED "9808030000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- FrameRelayEng Enterprise MIB." frameRelayEngMIB OBJECT IDENTIFIER ::= { passportMIBs 73 } -- -- Lp Eng FrameRelaySystem -- This component holds engineering parameters and statistics used by -- Frame Relay on this LP. lpEngFrs OBJECT IDENTIFIER ::= { lpEng 3 } lpEngFrsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEngFrsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEngFrs components." ::= { lpEngFrs 1 } lpEngFrsRowStatusEntry OBJECT-TYPE SYNTAX LpEngFrsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEngFrs component." INDEX { lpIndex, lpEngIndex, lpEngFrsIndex } ::= { lpEngFrsRowStatusTable 1 } LpEngFrsRowStatusEntry ::= SEQUENCE { lpEngFrsRowStatus RowStatus, lpEngFrsComponentName DisplayString, lpEngFrsStorageType StorageType, lpEngFrsIndex NonReplicated } lpEngFrsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEngFrs components. These components can be added and deleted." ::= { lpEngFrsRowStatusEntry 1 } lpEngFrsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEngFrsRowStatusEntry 2 } lpEngFrsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEngFrs tables." ::= { lpEngFrsRowStatusEntry 4 } lpEngFrsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEngFrs tables." ::= { lpEngFrsRowStatusEntry 10 } lpEngFrsOperTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEngFrsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Frame Relay default or current engineering parameters and statistics for this LP." ::= { lpEngFrs 10 } lpEngFrsOperEntry OBJECT-TYPE SYNTAX LpEngFrsOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEngFrsOperTable." INDEX { lpIndex, lpEngIndex, lpEngFrsIndex } ::= { lpEngFrsOperTable 1 } LpEngFrsOperEntry ::= SEQUENCE { lpEngFrsMaxCalls Unsigned32, lpEngFrsHeadroomCalls Unsigned32, lpEngFrsCurrentCalls Gauge32, lpEngFrsCallsRefused Unsigned32 } lpEngFrsMaxCalls OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum number of Frame Relay (FR) calls of any type (PVC, SPVC, or SVC) which can be simultaneously 'current' on the LP. Note that 'current' doesn't necessarily mean that the call is in data transfer. It minimally means that such a call can subsequently generate accounting records. When the value of currentCalls reaches the value of maxCalls for FR on this LP, subsequent call attempts are rejected by the FR service." DEFVAL { 1000000 } ::= { lpEngFrsOperEntry 1 } lpEngFrsHeadroomCalls OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates a number which allows a network engineer to do some statistical multiplexing for admitting calls when certain overload conditions are reached. For setting this, refer to the Engineering Guidelines. It depends on conditions such as the expected sustained SVC call setup/clear rates and how conservative one wants to be in certain 'error' conditions where many calls are cleared simultaneously." DEFVAL { 1000000 } ::= { lpEngFrsOperEntry 2 } lpEngFrsCurrentCalls OBJECT-TYPE SYNTAX Gauge32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of Frame Relay calls (initially just FrUni and FrNni) which are 'current'. Note that 'current' doesn't necessarily mean that the call is in data transfer. It minimally means that such a call can subsequently generate accounting records." ::= { lpEngFrsOperEntry 3 } lpEngFrsCallsRefused OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of call connections (including calls from the link as well as calls from the subnet) that have been refused because currentCalls has reached the limits, as specified by the engineering formulas for Frs on this LP." ::= { lpEngFrsOperEntry 4 } -- -- Lp Eng Frs Override -- This component holds provisionable engineering parameters used -- by Frame Relay on this LP. lpEngFrsOv OBJECT IDENTIFIER ::= { lpEngFrs 2 } lpEngFrsOvRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEngFrsOvRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of lpEngFrsOv components." ::= { lpEngFrsOv 1 } lpEngFrsOvRowStatusEntry OBJECT-TYPE SYNTAX LpEngFrsOvRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single lpEngFrsOv component." INDEX { lpIndex, lpEngIndex, lpEngFrsIndex, lpEngFrsOvIndex } ::= { lpEngFrsOvRowStatusTable 1 } LpEngFrsOvRowStatusEntry ::= SEQUENCE { lpEngFrsOvRowStatus RowStatus, lpEngFrsOvComponentName DisplayString, lpEngFrsOvStorageType StorageType, lpEngFrsOvIndex NonReplicated } lpEngFrsOvRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of lpEngFrsOv components. These components can be added and deleted." ::= { lpEngFrsOvRowStatusEntry 1 } lpEngFrsOvComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { lpEngFrsOvRowStatusEntry 2 } lpEngFrsOvStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the lpEngFrsOv tables." ::= { lpEngFrsOvRowStatusEntry 4 } lpEngFrsOvIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the lpEngFrsOv tables." ::= { lpEngFrsOvRowStatusEntry 10 } lpEngFrsOvProvTable OBJECT-TYPE SYNTAX SEQUENCE OF LpEngFrsOvProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the Frame Relay provisionable engineering parameters for this LP. DESCRIPTION" ::= { lpEngFrsOv 10 } lpEngFrsOvProvEntry OBJECT-TYPE SYNTAX LpEngFrsOvProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the lpEngFrsOvProvTable." INDEX { lpIndex, lpEngIndex, lpEngFrsIndex, lpEngFrsOvIndex } ::= { lpEngFrsOvProvTable 1 } LpEngFrsOvProvEntry ::= SEQUENCE { lpEngFrsOvMaxCalls Unsigned32, lpEngFrsOvHeadroomCalls Unsigned32 } lpEngFrsOvMaxCalls OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the maximum number of Frame Relay calls of any type (PVC, SPVC, or SVC) which can be simultaneously 'current' on this LP. Note that 'current' doesn't necessarily mean that the call is in data transfer. It minimally means that such a call can subsequently generate accounting records. When the value of currentCalls reaches the value of maxCalls for FR on this LP, subsequent call attempts are rejected by the FR services." DEFVAL { 1000000 } ::= { lpEngFrsOvProvEntry 1 } lpEngFrsOvHeadroomCalls OBJECT-TYPE SYNTAX Unsigned32 (0..1000000) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a number which allows a network engineer to do some statistical multiplexing for admitting calls when certain overload conditions are reached. For setting this, refer to the Engineering Guidelines. It depends on conditions such as the expected sustained SVC call setup/clear rates and how conservative one wants to be in certain 'error' conditions where many calls are cleared simultaneously." DEFVAL { 1000000 } ::= { lpEngFrsOvProvEntry 2 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { lpEngFrsOvStorageType, -- lpEngFrsCallsRefused, -- lpEngFrsComponentName, -- lpEngFrsOvComponentName, -- lpEngFrsHeadroomCalls, -- lpEngFrsOvHeadroomCalls, -- lpEngFrsCurrentCalls, -- lpEngFrsStorageType, -- lpEngFrsRowStatus, -- lpEngFrsOvRowStatus, -- lpEngFrsMaxCalls, -- lpEngFrsOvMaxCalls } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." frameRelayEngGroup OBJECT IDENTIFIER ::= { frameRelayEngMIB 1 } frameRelayEngGroupBE OBJECT IDENTIFIER ::= { frameRelayEngGroup 5 } frameRelayEngGroupBE00 OBJECT IDENTIFIER ::= { frameRelayEngGroupBE 1 } frameRelayEngGroupBE00A OBJECT IDENTIFIER ::= { frameRelayEngGroupBE00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 FrameRelayEng." -- STATUS mandatory -- DESCRIPTION "FrameRelayEng MIB: MIB Version BE00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-FrameRelayEngMIB -- INCLUDES { frameRelayEngGroupBE00A } frameRelayEngCapabilities OBJECT IDENTIFIER ::= { frameRelayEngMIB 3 } frameRelayEngCapabilitiesBE OBJECT IDENTIFIER ::= { frameRelayEngCapabilities 5 } frameRelayEngCapabilitiesBE00 OBJECT IDENTIFIER ::= { frameRelayEngCapabilitiesBE 1 } frameRelayEngCapabilitiesBE00A OBJECT IDENTIFIER ::= { frameRelayEngCapabilitiesBE00 2 } END