Nortel-Magellan-Passport-FrTraceRcvrMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB RowPointer, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, Hex, NonReplicated, HexString, EnterpriseDateAndTime, DigitString FROM Nortel-Magellan-Passport-TextualConventionsMIB traceSessionIndex, traceRcvrIndex, traceSession, traceIndex, traceRcvr FROM Nortel-Magellan-Passport-TraceBaseMIB; -- LAST-UPDATED "9903220000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- FrTraceRcvr Enterprise MIB." frTraceRcvrMIB OBJECT IDENTIFIER ::= { passportMIBs 139 } -- Trace Rcvr/ FrameRelay -- This component identifies the access method used by the receiver of -- the trace data as Frame Relay. traceRcvrFr OBJECT IDENTIFIER ::= { traceRcvr 3 } traceRcvrFrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrFr components." ::= { traceRcvrFr 1 } traceRcvrFrRowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrFrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrFr component." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex } ::= { traceRcvrFrRowStatusTable 1 } TraceRcvrFrRowStatusEntry ::= SEQUENCE { traceRcvrFrRowStatus RowStatus, traceRcvrFrComponentName DisplayString, traceRcvrFrStorageType StorageType, traceRcvrFrIndex NonReplicated } traceRcvrFrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrFr components. These components can be added and deleted." ::= { traceRcvrFrRowStatusEntry 1 } traceRcvrFrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrFrRowStatusEntry 2 } traceRcvrFrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrFr tables." ::= { traceRcvrFrRowStatusEntry 4 } traceRcvrFrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrFr tables." ::= { traceRcvrFrRowStatusEntry 10 } -- Trace Rcvr/ Fr DataNetworkAddress -- This component defines the calling end of the trace connection. It -- includes the set of attributes which apply to a Vc connection to a -- Frame Relay trace receiver. traceRcvrFrDna OBJECT IDENTIFIER ::= { traceRcvrFr 2 } traceRcvrFrDnaRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrFrDna components." ::= { traceRcvrFrDna 1 } traceRcvrFrDnaRowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrFrDnaRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrFrDna component." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDnaIndex } ::= { traceRcvrFrDnaRowStatusTable 1 } TraceRcvrFrDnaRowStatusEntry ::= SEQUENCE { traceRcvrFrDnaRowStatus RowStatus, traceRcvrFrDnaComponentName DisplayString, traceRcvrFrDnaStorageType StorageType, traceRcvrFrDnaIndex NonReplicated } traceRcvrFrDnaRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrFrDna components. These components cannot be added nor deleted." ::= { traceRcvrFrDnaRowStatusEntry 1 } traceRcvrFrDnaComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrFrDnaRowStatusEntry 2 } traceRcvrFrDnaStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrFrDna tables." ::= { traceRcvrFrDnaRowStatusEntry 4 } traceRcvrFrDnaIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrFrDna tables." ::= { traceRcvrFrDnaRowStatusEntry 10 } traceRcvrFrDnaAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains attributes common to all Dnas. This group is composed of two attributes which define a Dna. These attributes are used to interpret the format of the address digits." ::= { traceRcvrFrDna 10 } traceRcvrFrDnaAddressEntry OBJECT-TYPE SYNTAX TraceRcvrFrDnaAddressEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrFrDnaAddressTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDnaIndex } ::= { traceRcvrFrDnaAddressTable 1 } TraceRcvrFrDnaAddressEntry ::= SEQUENCE { traceRcvrFrDnaNumberingPlanIndicator INTEGER, traceRcvrFrDnaDataNetworkAddress DigitString } traceRcvrFrDnaNumberingPlanIndicator OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Numbering Plan Indicator (NPI) of the Dna that is entered. The address may belong to an E.164 or X.121 plan." DEFVAL { x121 } ::= { traceRcvrFrDnaAddressEntry 1 } traceRcvrFrDnaDataNetworkAddress OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "The Dna attribute contains digits which form a unique identifier for the calling end of the trace connection. Dna digits are selected and assigned by network operators. The maximum Dna length is 15 digits." ::= { traceRcvrFrDnaAddressEntry 2 } traceRcvrFrDnaOutgoingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the call options for outgoing calls." ::= { traceRcvrFrDna 11 } traceRcvrFrDnaOutgoingOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrFrDnaOutgoingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrFrDnaOutgoingOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDnaIndex } ::= { traceRcvrFrDnaOutgoingOptionsTable 1 } TraceRcvrFrDnaOutgoingOptionsEntry ::= SEQUENCE { traceRcvrFrDnaOutCalls INTEGER, traceRcvrFrDnaOutDefaultPriority INTEGER, traceRcvrFrDnaOutIntl INTEGER, traceRcvrFrDnaOutDefaultPathReliability INTEGER, traceRcvrFrDnaOutPathReliabilityOverRide INTEGER, traceRcvrFrDnaOutPathReliabilitySignal INTEGER, traceRcvrFrDnaOutAccess INTEGER } traceRcvrFrDnaOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing calls (from the DTE to the network) can be made using this particular Dna component." DEFVAL { allowed } ::= { traceRcvrFrDnaOutgoingOptionsEntry 1 } traceRcvrFrDnaOutDefaultPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-write STATUS mandatory DESCRIPTION "If this attribute is set to normal, then the default priority for outgoing calls (from the DTE to the network) using this particular Dna is normal priority when the priority is not specified in the call. If this attribute is set to high then the default priority for outgoing calls using this particular Dna is high priority." DEFVAL { high } ::= { traceRcvrFrDnaOutgoingOptionsEntry 7 } traceRcvrFrDnaOutIntl OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing international calls (from the DTE to the network) can be made using this particular Dna. This attribute also controls access to another numbering plan, and specifies that cross-numbering plan calls are allowed." DEFVAL { allowed } ::= { traceRcvrFrDnaOutgoingOptionsEntry 8 } traceRcvrFrDnaOutDefaultPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default reliability class of routing for all calls (from the DTE to the network) using this particular Dna. The chosen default reliability class of routing normally applies to all packets (including the call packets) travelling into the network. A value of high specifies that packets are to be overflowed or retransmitted at various routing levels. Typically high reliability results in duplication and disordering of packets in the network, when errors are detected or during link congestion. The VC handles the duplication and disordering to ensure that packets are delivered to the interface in the proper sequence and without duplication." DEFVAL { high } ::= { traceRcvrFrDnaOutgoingOptionsEntry 14 } traceRcvrFrDnaOutPathReliabilityOverRide OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that the called end of the connection will not use the calling end provisioning data for reliability class of routing to override the provisioning data at the called end." DEFVAL { no } ::= { traceRcvrFrDnaOutgoingOptionsEntry 15 } traceRcvrFrDnaOutPathReliabilitySignal OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that reliability routing signaling is not used." DEFVAL { disallowed } ::= { traceRcvrFrDnaOutgoingOptionsEntry 16 } traceRcvrFrDnaOutAccess OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is an extension of the Closed User Group (CUG) facility. If this attribute is set to a value of allowed, it specifies that outgoing calls (from the DTE to the network) to the open (non- CUG) part of the network are permitted. It also permits outgoing calls to interfaces that have Incoming Access capabilities. If set to a value of disallowed, then such calls cannot be made using this Dna (the calls will be cleared by the local DCE). This attribute corresponds to the ITU-T 'Closed User Group with Outgoing Access' feature." DEFVAL { disallowed } ::= { traceRcvrFrDnaOutgoingOptionsEntry 17 } traceRcvrFrDnaIncomingOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group defines the call options for incoming calls." ::= { traceRcvrFrDna 12 } traceRcvrFrDnaIncomingOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrFrDnaIncomingOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrFrDnaIncomingOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDnaIndex } ::= { traceRcvrFrDnaIncomingOptionsTable 1 } TraceRcvrFrDnaIncomingOptionsEntry ::= SEQUENCE { traceRcvrFrDnaIncCalls INTEGER } traceRcvrFrDnaIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that incoming calls (from the network to the DTE) cannot be made to this Dna." DEFVAL { disallowed } ::= { traceRcvrFrDnaIncomingOptionsEntry 1 } traceRcvrFrDnaCallOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The CallOptions group defines additional options for calls which are not specific to the direction of the call." ::= { traceRcvrFrDna 13 } traceRcvrFrDnaCallOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrFrDnaCallOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrFrDnaCallOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDnaIndex } ::= { traceRcvrFrDnaCallOptionsTable 1 } TraceRcvrFrDnaCallOptionsEntry ::= SEQUENCE { traceRcvrFrDnaPacketSizes OCTET STRING, traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize INTEGER, traceRcvrFrDnaDefaultSendToNetworkPacketSize INTEGER, traceRcvrFrDnaCugFormat INTEGER } traceRcvrFrDnaPacketSizes OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the allowable packet sizes supported for calls using this Dna. Description of bits: n16(0) n32(1) n64(2) n128(3) n256(4) n512(5) n1024(6) n2048(7) n4096(8)" DEFVAL { '0100'H } ::= { traceRcvrFrDnaCallOptionsEntry 2 } traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default local receive packet size from network to DTE for calls using this particular Dna." DEFVAL { n2048 } ::= { traceRcvrFrDnaCallOptionsEntry 3 } traceRcvrFrDnaDefaultSendToNetworkPacketSize OBJECT-TYPE SYNTAX INTEGER { n16(4), n32(5), n64(6), n128(7), n256(8), n512(9), n1024(10), n2048(11), n4096(12) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the default local send packet size from DTE to network for all calls using this particular Dna." DEFVAL { n2048 } ::= { traceRcvrFrDnaCallOptionsEntry 4 } traceRcvrFrDnaCugFormat OBJECT-TYPE SYNTAX INTEGER { basic(0), extended(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the format to signal CUG indices as basic or extended. A basic CUG index format is two digits long. An extended CUG index format is four digits long." DEFVAL { basic } ::= { traceRcvrFrDnaCallOptionsEntry 10 } -- Trace Rcvr/ Fr Dna ClosedUserGroup -- The ClosedUserGroup component defines options associated with a -- national or international closed user group identifier. When a Dna is -- defined with a Cug, calls to other Dnas which do not have the same -- Cug interlockCode defined are refused. When a Dna is not defined -- with a Cug, calls to other Dnas which have any Cug interlockCode -- defined are refused. The Dna attributes outAccess and incAccess -- can override these rules. -- If this component is present, the Frame Relay interface which -- connects to the Frame Relay trace receiver must be provisioned -- with the same Cug interlockCode. traceRcvrFrDnaCug OBJECT IDENTIFIER ::= { traceRcvrFrDna 2 } traceRcvrFrDnaCugRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrFrDnaCug components." ::= { traceRcvrFrDnaCug 1 } traceRcvrFrDnaCugRowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrFrDnaCugRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrFrDnaCug component." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDnaIndex, traceRcvrFrDnaCugIndex } ::= { traceRcvrFrDnaCugRowStatusTable 1 } TraceRcvrFrDnaCugRowStatusEntry ::= SEQUENCE { traceRcvrFrDnaCugRowStatus RowStatus, traceRcvrFrDnaCugComponentName DisplayString, traceRcvrFrDnaCugStorageType StorageType, traceRcvrFrDnaCugIndex Integer32 } traceRcvrFrDnaCugRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrFrDnaCug components. These components can be added and deleted." ::= { traceRcvrFrDnaCugRowStatusEntry 1 } traceRcvrFrDnaCugComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrFrDnaCugRowStatusEntry 2 } traceRcvrFrDnaCugStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrFrDnaCug tables." ::= { traceRcvrFrDnaCugRowStatusEntry 4 } traceRcvrFrDnaCugIndex OBJECT-TYPE SYNTAX Integer32 (1..1) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrFrDnaCug tables." ::= { traceRcvrFrDnaCugRowStatusEntry 10 } traceRcvrFrDnaCugCugOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Attributes in this group define ClosedUserGroup options associated with interlockCode. Dnas with the same CUG (interlockCode) can make calls within this group. Various combinations of attributes are defined under this option which permit or prevent calls in the same CUG group." ::= { traceRcvrFrDnaCug 10 } traceRcvrFrDnaCugCugOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrFrDnaCugCugOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrFrDnaCugCugOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDnaIndex, traceRcvrFrDnaCugIndex } ::= { traceRcvrFrDnaCugCugOptionsTable 1 } TraceRcvrFrDnaCugCugOptionsEntry ::= SEQUENCE { traceRcvrFrDnaCugType INTEGER, traceRcvrFrDnaCugDnic DigitString, traceRcvrFrDnaCugInterlockCode Unsigned32, traceRcvrFrDnaCugPreferential INTEGER, traceRcvrFrDnaCugOutCalls INTEGER, traceRcvrFrDnaCugIncCalls INTEGER, traceRcvrFrDnaCugPrivileged INTEGER } traceRcvrFrDnaCugType OBJECT-TYPE SYNTAX INTEGER { national(0), international(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the CUG type as either national or international. A national CUG has significance within the local network only. An international CUG has significance across network boundaries." DEFVAL { national } ::= { traceRcvrFrDnaCugCugOptionsEntry 1 } traceRcvrFrDnaCugDnic OBJECT-TYPE SYNTAX DigitString (SIZE (4)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Data Network ID Code of the network that is administering the international CUG. This attribute is not used for a national CUG and should be left at its default value. The dnic value is not an arbitrary number. It is assigned by international agreement and controlled by ITU-T." DEFVAL { '30303030'H } -- "0000" ::= { traceRcvrFrDnaCugCugOptionsEntry 2 } traceRcvrFrDnaCugInterlockCode OBJECT-TYPE SYNTAX Unsigned32 (0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a numeric identifier of a national or international closed user group. It is an arbitrary number. This attribute may also be called CUG in some descriptions. Dnas defined with this number can only make calls to Dnas defined with the same interlockCode." DEFVAL { 0 } ::= { traceRcvrFrDnaCugCugOptionsEntry 3 } traceRcvrFrDnaCugPreferential OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that this Cug is to be used on all outgoing calls to the Frame Relay trace receiver." DEFVAL { yes } ::= { traceRcvrFrDnaCugCugOptionsEntry 4 } traceRcvrFrDnaCugOutCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that outgoing calls (from the DTE into the network) can be made using this particular Cug." DEFVAL { allowed } ::= { traceRcvrFrDnaCugCugOptionsEntry 5 } traceRcvrFrDnaCugIncCalls OBJECT-TYPE SYNTAX INTEGER { disallowed(0), allowed(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that incoming calls (from the network to the DTE) cannot be accepted using this Cug." DEFVAL { disallowed } ::= { traceRcvrFrDnaCugCugOptionsEntry 6 } traceRcvrFrDnaCugPrivileged OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies that this Cug is privileged. For a call between two closed user group Dnas to connect, at least one Dna must have a privileged Cug." DEFVAL { yes } ::= { traceRcvrFrDnaCugCugOptionsEntry 7 } -- Trace Rcvr/ Fr DirectCall -- This component defines direct call options for the call to the Frame -- Relay trace receiver. The connection is initiated on receipt of a Start -- FrUni/n Trace command. traceRcvrFrDc OBJECT IDENTIFIER ::= { traceRcvrFr 3 } traceRcvrFrDcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of traceRcvrFrDc components." ::= { traceRcvrFrDc 1 } traceRcvrFrDcRowStatusEntry OBJECT-TYPE SYNTAX TraceRcvrFrDcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceRcvrFrDc component." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDcIndex } ::= { traceRcvrFrDcRowStatusTable 1 } TraceRcvrFrDcRowStatusEntry ::= SEQUENCE { traceRcvrFrDcRowStatus RowStatus, traceRcvrFrDcComponentName DisplayString, traceRcvrFrDcStorageType StorageType, traceRcvrFrDcIndex NonReplicated } traceRcvrFrDcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceRcvrFrDc components. These components cannot be added nor deleted." ::= { traceRcvrFrDcRowStatusEntry 1 } traceRcvrFrDcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceRcvrFrDcRowStatusEntry 2 } traceRcvrFrDcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceRcvrFrDc tables." ::= { traceRcvrFrDcRowStatusEntry 4 } traceRcvrFrDcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceRcvrFrDc tables." ::= { traceRcvrFrDcRowStatusEntry 10 } traceRcvrFrDcOptionsTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceRcvrFrDcOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Options group defines attributes associated with the SVC direct call." ::= { traceRcvrFrDc 10 } traceRcvrFrDcOptionsEntry OBJECT-TYPE SYNTAX TraceRcvrFrDcOptionsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceRcvrFrDcOptionsTable." INDEX { traceIndex, traceRcvrIndex, traceRcvrFrIndex, traceRcvrFrDcIndex } ::= { traceRcvrFrDcOptionsTable 1 } TraceRcvrFrDcOptionsEntry ::= SEQUENCE { traceRcvrFrDcRemoteNpi INTEGER, traceRcvrFrDcRemoteDna DigitString, traceRcvrFrDcType INTEGER, traceRcvrFrDcUserData HexString } traceRcvrFrDcRemoteNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the numbering plan used for the remoteDna." DEFVAL { x121 } ::= { traceRcvrFrDcOptionsEntry 3 } traceRcvrFrDcRemoteDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Data Network Address of the remote end of the connection. This is the DNA of the Frame Relay trace receiver which will receive the trace data." ::= { traceRcvrFrDcOptionsEntry 4 } traceRcvrFrDcType OBJECT-TYPE SYNTAX INTEGER { switched(0), permanentMaster(1), permanentSlave(2), permanentBackupSlave(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute specifies the type of call as switched. For a switched call, no information is defined at the remote end about the local end of the connection." DEFVAL { switched } ::= { traceRcvrFrDcOptionsEntry 6 } traceRcvrFrDcUserData OBJECT-TYPE SYNTAX HexString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains the user data. It is a 0 to 16 byte length string which is appended to the call request packet that is presented to the called (destination) DTE." DEFVAL { ''H } -- "" ::= { traceRcvrFrDcOptionsEntry 8 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- Trace Session/ FrameRelay -- This component identifies the access method used by the receiver of -- the trace data as Frame Relay. traceSessionFr OBJECT IDENTIFIER ::= { traceSession 3 } traceSessionFrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionFrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionFr components." ::= { traceSessionFr 1 } traceSessionFrRowStatusEntry OBJECT-TYPE SYNTAX TraceSessionFrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceSessionFr component." INDEX { traceIndex, traceSessionIndex, traceSessionFrIndex } ::= { traceSessionFrRowStatusTable 1 } TraceSessionFrRowStatusEntry ::= SEQUENCE { traceSessionFrRowStatus RowStatus, traceSessionFrComponentName DisplayString, traceSessionFrStorageType StorageType, traceSessionFrIndex NonReplicated } traceSessionFrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceSessionFr components. These components cannot be added nor deleted." ::= { traceSessionFrRowStatusEntry 1 } traceSessionFrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceSessionFrRowStatusEntry 2 } traceSessionFrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceSessionFr tables." ::= { traceSessionFrRowStatusEntry 4 } traceSessionFrIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceSessionFr tables." ::= { traceSessionFrRowStatusEntry 10 } -- -- *** THIS SUBTREE CURRENTLY NOT IMPLEMENTED *** -- -- This component defines attributes collected by Frame Relay Vc. traceSessionFrVc OBJECT IDENTIFIER ::= { traceSessionFr 2 } traceSessionFrVcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionFrVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of traceSessionFrVc components." ::= { traceSessionFrVc 1 } traceSessionFrVcRowStatusEntry OBJECT-TYPE SYNTAX TraceSessionFrVcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single traceSessionFrVc component." INDEX { traceIndex, traceSessionIndex, traceSessionFrIndex, traceSessionFrVcIndex } ::= { traceSessionFrVcRowStatusTable 1 } TraceSessionFrVcRowStatusEntry ::= SEQUENCE { traceSessionFrVcRowStatus RowStatus, traceSessionFrVcComponentName DisplayString, traceSessionFrVcStorageType StorageType, traceSessionFrVcIndex NonReplicated } traceSessionFrVcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of traceSessionFrVc components. These components cannot be added nor deleted." ::= { traceSessionFrVcRowStatusEntry 1 } traceSessionFrVcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { traceSessionFrVcRowStatusEntry 2 } traceSessionFrVcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the traceSessionFrVc tables." ::= { traceSessionFrVcRowStatusEntry 4 } traceSessionFrVcIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the traceSessionFrVc tables." ::= { traceSessionFrVcRowStatusEntry 10 } traceSessionFrVcCadTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionFrVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application." ::= { traceSessionFrVc 10 } traceSessionFrVcCadEntry OBJECT-TYPE SYNTAX TraceSessionFrVcCadEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceSessionFrVcCadTable." INDEX { traceIndex, traceSessionIndex, traceSessionFrIndex, traceSessionFrVcIndex } ::= { traceSessionFrVcCadTable 1 } TraceSessionFrVcCadEntry ::= SEQUENCE { traceSessionFrVcType INTEGER, traceSessionFrVcState INTEGER, traceSessionFrVcPreviousState INTEGER, traceSessionFrVcDiagnosticCode Unsigned32, traceSessionFrVcPreviousDiagnosticCode Unsigned32, traceSessionFrVcCalledNpi INTEGER, traceSessionFrVcCalledDna DigitString, traceSessionFrVcCalledLcn Unsigned32, traceSessionFrVcCallingNpi INTEGER, traceSessionFrVcCallingDna DigitString, traceSessionFrVcCallingLcn Unsigned32, traceSessionFrVcAccountingEnabled INTEGER, traceSessionFrVcFastSelectCall INTEGER, traceSessionFrVcPathReliability INTEGER, traceSessionFrVcAccountingEnd INTEGER, traceSessionFrVcPriority INTEGER, traceSessionFrVcSegmentSize Unsigned32, traceSessionFrVcMaxSubnetPktSize Unsigned32, traceSessionFrVcRcosToNetwork INTEGER, traceSessionFrVcRcosFromNetwork INTEGER, traceSessionFrVcEmissionPriorityToNetwork INTEGER, traceSessionFrVcEmissionPriorityFromNetwork INTEGER, traceSessionFrVcDataPath AsciiString } traceSessionFrVcType OBJECT-TYPE SYNTAX INTEGER { svc(0), pvc(1), spvc(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the type of call, pvc,svc or spvc." ::= { traceSessionFrVcCadEntry 1 } traceSessionFrVcState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4." ::= { traceSessionFrVcCadEntry 2 } traceSessionFrVcPreviousState OBJECT-TYPE SYNTAX INTEGER { creating(0), readyP1(1), dteWaitingP2(2), dceWaitingP3(3), dataTransferP4(4), unsupportedP5(5), dteClearRequestP6(6), dceClearIndicationP7(7), termination(8) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing." ::= { traceSessionFrVcCadEntry 3 } traceSessionFrVcDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { traceSessionFrVcCadEntry 4 } traceSessionFrVcPreviousDiagnosticCode OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the internal substate of call control. It is used to further refine state of call processing." ::= { traceSessionFrVcCadEntry 5 } traceSessionFrVcCalledNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the called end." ::= { traceSessionFrVcCadEntry 6 } traceSessionFrVcCalledDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection." ::= { traceSessionFrVcCadEntry 7 } traceSessionFrVcCalledLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information." ::= { traceSessionFrVcCadEntry 8 } traceSessionFrVcCallingNpi OBJECT-TYPE SYNTAX INTEGER { x121(0), e164(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Numbering Plan Indicator (NPI) of the calling end." ::= { traceSessionFrVcCadEntry 9 } traceSessionFrVcCallingDna OBJECT-TYPE SYNTAX DigitString (SIZE (1..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Data Network Address (Dna) of the calling end." ::= { traceSessionFrVcCadEntry 10 } traceSessionFrVcCallingLcn OBJECT-TYPE SYNTAX Unsigned32 (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Logical Channel Number of the calling end." ::= { traceSessionFrVcCadEntry 11 } traceSessionFrVcAccountingEnabled OBJECT-TYPE SYNTAX INTEGER { yes(0), no(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and Module wide accounting data options." ::= { traceSessionFrVcCadEntry 12 } traceSessionFrVcFastSelectCall OBJECT-TYPE SYNTAX INTEGER { no(0), yes(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays that this is a fast select call." ::= { traceSessionFrVcCadEntry 13 } traceSessionFrVcPathReliability OBJECT-TYPE SYNTAX INTEGER { high(0), normal(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the path reliability." ::= { traceSessionFrVcCadEntry 19 } traceSessionFrVcAccountingEnd OBJECT-TYPE SYNTAX INTEGER { callingEnd(0), calledEnd(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record." ::= { traceSessionFrVcCadEntry 20 } traceSessionFrVcPriority OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays whether the call is a normal or a high priority call." ::= { traceSessionFrVcCadEntry 21 } traceSessionFrVcSegmentSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received." ::= { traceSessionFrVcCadEntry 22 } traceSessionFrVcMaxSubnetPktSize OBJECT-TYPE SYNTAX Unsigned32 (0..4096) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the maximum packet size allowed on the Vc." ::= { traceSessionFrVcCadEntry 27 } traceSessionFrVcRcosToNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the routing metric routing class of service to the network." ::= { traceSessionFrVcCadEntry 28 } traceSessionFrVcRcosFromNetwork OBJECT-TYPE SYNTAX INTEGER { throughput(0), delay(1), multimedia(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the routing metric Routing Class of Service from the Network." ::= { traceSessionFrVcCadEntry 29 } traceSessionFrVcEmissionPriorityToNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity to the network." ::= { traceSessionFrVcCadEntry 30 } traceSessionFrVcEmissionPriorityFromNetwork OBJECT-TYPE SYNTAX INTEGER { normal(0), high(1), interrupting(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the network internal emission priotity from the network." ::= { traceSessionFrVcCadEntry 31 } traceSessionFrVcDataPath OBJECT-TYPE SYNTAX AsciiString (SIZE (0..32)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, the string dprsOnly is displayed. (dynamic packet routing system) If the connection is using dprsMcsOnly data path, the string dprsMcsOnly is displayed. If the connection is using dprsMcsFirst data path, the string dprsMcsFirst is displayed." ::= { traceSessionFrVcCadEntry 32 } traceSessionFrVcIntdTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionFrVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued." ::= { traceSessionFrVc 11 } traceSessionFrVcIntdEntry OBJECT-TYPE SYNTAX TraceSessionFrVcIntdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceSessionFrVcIntdTable." INDEX { traceIndex, traceSessionIndex, traceSessionFrIndex, traceSessionFrVcIndex } ::= { traceSessionFrVcIntdTable 1 } TraceSessionFrVcIntdEntry ::= SEQUENCE { traceSessionFrVcCallReferenceNumber Hex, traceSessionFrVcElapsedTimeTillNow Unsigned32, traceSessionFrVcSegmentsRx Unsigned32, traceSessionFrVcSegmentsSent Unsigned32, traceSessionFrVcStartTime EnterpriseDateAndTime } traceSessionFrVcCallReferenceNumber OBJECT-TYPE SYNTAX Hex (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in matching duplicate records generated at each end of the call." ::= { traceSessionFrVcIntdEntry 1 } traceSessionFrVcElapsedTimeTillNow OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started." ::= { traceSessionFrVcIntdEntry 2 } traceSessionFrVcSegmentsRx OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of the sink Vc and to the sink AP Conditions in which packets may be discarded by the sink Vc include: missing packets due to subnet discards, segmentation protocol violations due to subnet discard, duplicated and out-of-ranged packets and packets that arrive while Vc is in path recovery state." ::= { traceSessionFrVcIntdEntry 3 } traceSessionFrVcSegmentsSent OBJECT-TYPE SYNTAX Unsigned32 (0..16777215) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, these packets may be dropped by trunking, for instance. This counter is not updated when splitting fails, when Vc is in a path recovery state, when packet forwarding fails to forward this packet and when subsequent packets have to be discarded as we want to minimize the chance of out-of-sequence and do not intentionally send out-of- sequenced packets into the subnet." ::= { traceSessionFrVcIntdEntry 4 } traceSessionFrVcStartTime OBJECT-TYPE SYNTAX EnterpriseDateAndTime (SIZE (0 | 19)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes." ::= { traceSessionFrVcIntdEntry 5 } traceSessionFrVcFrdTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionFrVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly useful when the network has experienced abnormality and we want to isolate problems and pinpoint trouble spots. Attributes are collected on a per Vc basis. Until a need is identified, statistics are not collected at a processor level. Each attribute is stored in a 32 bit field and is initialized to zero when a Vc enters into the data transfer state. When a PVC is disconnected and then connected again, the attributes will be reset. Attributes cannot be reset through other methods. Frame Relay Vc uses a best effort data packet delivery protocol and a different packet segmentation and combination methods from the General Vc. The Frame Relay Vc uses the same call setup and control mechanism (e.g. the support of non-flow control data packets) as in a General Vc. Most General Vc statistics and internal variables are used in a Frame Relay Vc and are displayed by software developers" ::= { traceSessionFrVc 12 } traceSessionFrVcFrdEntry OBJECT-TYPE SYNTAX TraceSessionFrVcFrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceSessionFrVcFrdTable." INDEX { traceIndex, traceSessionIndex, traceSessionFrIndex, traceSessionFrVcIndex } ::= { traceSessionFrVcFrdTable 1 } TraceSessionFrVcFrdEntry ::= SEQUENCE { traceSessionFrVcFrmCongestedToSubnet Unsigned32, traceSessionFrVcCannotForwardToSubnet Unsigned32, traceSessionFrVcNotDataXferToSubnet Unsigned32, traceSessionFrVcOutOfRangeFrmFromSubnet Unsigned32, traceSessionFrVcCombErrorsFromSubnet Unsigned32, traceSessionFrVcDuplicatesFromSubnet Unsigned32, traceSessionFrVcNotDataXferFromSubnet Unsigned32, traceSessionFrVcFrmLossTimeouts Unsigned32, traceSessionFrVcOoSeqByteCntExceeded Unsigned32, traceSessionFrVcPeakOoSeqPktCount Unsigned32, traceSessionFrVcPeakOoSeqFrmForwarded Unsigned32, traceSessionFrVcSendSequenceNumber Unsigned32, traceSessionFrVcPktRetryTimeouts Unsigned32, traceSessionFrVcPeakRetryQueueSize Unsigned32, traceSessionFrVcSubnetRecoveries Unsigned32, traceSessionFrVcOoSeqPktCntExceeded Unsigned32, traceSessionFrVcPeakOoSeqByteCount Unsigned32 } traceSessionFrVcFrmCongestedToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller subnet packet size." ::= { traceSessionFrVcFrdEntry 2 } traceSessionFrVcCannotForwardToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increased when packet forwarding fails to forward a packet into the subnet. If a frame is split into multiple subnet packets and a partial packet has to be discarded, all subsequent partial packets that have not yet been delivered to the subnet will be discarded as well." ::= { traceSessionFrVcFrdEntry 3 } traceSessionFrVcNotDataXferToSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure." ::= { traceSessionFrVcFrdEntry 4 } traceSessionFrVcOutOfRangeFrmFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late." ::= { traceSessionFrVcFrdEntry 5 } traceSessionFrVcCombErrorsFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subnet packets that are not delivered to the Vc. It cannot be used as an actual measure because some subnet packets may have been delivered to Vc but have to be discarded because these are partial packets to a frame in which some other partial packets have not been properly delivered to Vc" ::= { traceSessionFrVcFrdEntry 6 } traceSessionFrVcDuplicatesFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same packets arrive, then this attribute is increased." ::= { traceSessionFrVcFrdEntry 7 } traceSessionFrVcNotDataXferFromSubnet OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery." ::= { traceSessionFrVcFrdEntry 8 } traceSessionFrVcFrmLossTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { traceSessionFrVcFrdEntry 9 } traceSessionFrVcOoSeqByteCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { traceSessionFrVcFrdEntry 10 } traceSessionFrVcPeakOoSeqPktCount OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { traceSessionFrVcFrdEntry 11 } traceSessionFrVcPeakOoSeqFrmForwarded OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. When that packet arrives, this attribute records the maximum number of packets that were out-of-sequenced, but now have become in-sequenced. The statistics is used to measure expected queue size due to normal subnet packet disorder (not due to subnet packet discard). Current implementation also uses this statistics to set a maximum size for the out-of-sequenced queue." ::= { traceSessionFrVcFrdEntry 12 } traceSessionFrVcSendSequenceNumber OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame." ::= { traceSessionFrVcFrdEntry 13 } traceSessionFrVcPktRetryTimeouts OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet." ::= { traceSessionFrVcFrdEntry 15 } traceSessionFrVcPeakRetryQueueSize OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets." ::= { traceSessionFrVcFrdEntry 16 } traceSessionFrVcSubnetRecoveries OBJECT-TYPE SYNTAX Unsigned32 (0..5000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number of successful Vc recovery attempts." ::= { traceSessionFrVcFrdEntry 17 } traceSessionFrVcOoSeqPktCntExceeded OBJECT-TYPE SYNTAX Unsigned32 (0..255) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We need to keep this count to examine if the threshold is engineered properly. This should be used in conjunction with the peak value of out-of- sequenced queue and the number of times the loss frame timer has expired. This count should be relatively small when compared with loss frame timer expiry count." ::= { traceSessionFrVcFrdEntry 19 } traceSessionFrVcPeakOoSeqByteCount OBJECT-TYPE SYNTAX Unsigned32 (0..50000) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc." ::= { traceSessionFrVcFrdEntry 20 } traceSessionFrVcDmepTable OBJECT-TYPE SYNTAX SEQUENCE OF TraceSessionFrVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection is using dprsMcsOnly or dprsMcsFirst data path, this attribute displays component name of the dprsMcsEndPoint." ::= { traceSessionFrVc 417 } traceSessionFrVcDmepEntry OBJECT-TYPE SYNTAX TraceSessionFrVcDmepEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the traceSessionFrVcDmepTable." INDEX { traceIndex, traceSessionIndex, traceSessionFrIndex, traceSessionFrVcIndex, traceSessionFrVcDmepValue } ::= { traceSessionFrVcDmepTable 1 } TraceSessionFrVcDmepEntry ::= SEQUENCE { traceSessionFrVcDmepValue RowPointer } traceSessionFrVcDmepValue OBJECT-TYPE SYNTAX RowPointer ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents both the value and the index for the traceSessionFrVcDmepTable." ::= { traceSessionFrVcDmepEntry 1 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { traceRcvrFrDnaCugComponentName, -- traceSessionFrVcPreviousDiagnosticCode, -- traceRcvrFrDnaCugDnic, -- traceSessionFrVcFastSelectCall, -- traceSessionFrVcCallingLcn, -- traceSessionFrVcOutOfRangeFrmFromSubnet, -- traceRcvrFrDcType, -- traceSessionFrVcPeakOoSeqPktCount, -- traceRcvrFrDnaCugInterlockCode, -- traceSessionFrVcPriority, -- traceSessionFrVcType, -- traceRcvrFrDnaComponentName, -- traceSessionFrVcCalledNpi, -- traceSessionFrVcElapsedTimeTillNow, -- traceSessionFrVcAccountingEnabled, -- traceSessionFrComponentName, -- traceSessionFrVcSegmentsSent, -- traceSessionFrVcNotDataXferToSubnet, -- traceRcvrFrDnaCugOutCalls, -- traceSessionFrVcPreviousState, -- traceRcvrFrDcRowStatus, -- traceSessionFrVcSubnetRecoveries, -- traceRcvrFrDnaOutCalls, -- traceRcvrFrDnaOutPathReliabilityOverRide, -- traceSessionFrVcCalledDna, -- traceRcvrFrRowStatus, -- traceRcvrFrDcRemoteDna, -- traceRcvrFrDnaOutPathReliabilitySignal, -- traceSessionFrVcOoSeqByteCntExceeded, -- traceRcvrFrDcRemoteNpi, -- traceSessionFrVcOoSeqPktCntExceeded, -- traceSessionFrVcRcosToNetwork, -- traceSessionFrVcPeakRetryQueueSize, -- traceSessionFrVcSegmentSize, -- traceRcvrFrDnaCugPreferential, -- traceRcvrFrDnaNumberingPlanIndicator, -- traceRcvrFrDnaOutAccess, -- traceSessionFrVcEmissionPriorityFromNetwork, -- traceRcvrFrDnaPacketSizes, -- traceRcvrFrDcComponentName, -- traceRcvrFrDnaDefaultRecvFrmNetworkPacketSize, -- traceSessionFrVcComponentName, -- traceSessionFrVcDataPath, -- traceSessionFrVcCombErrorsFromSubnet, -- traceSessionFrVcCallingDna, -- traceSessionFrVcCallingNpi, -- traceSessionFrVcPeakOoSeqFrmForwarded, -- traceSessionFrVcSegmentsRx, -- traceRcvrFrComponentName, -- traceSessionFrVcPktRetryTimeouts, -- traceRcvrFrDnaCugStorageType, -- traceSessionFrVcSendSequenceNumber, -- traceRcvrFrDnaDataNetworkAddress, -- traceRcvrFrDnaOutIntl, -- traceSessionFrVcPathReliability, -- traceSessionFrVcCannotForwardToSubnet, -- traceSessionFrVcAccountingEnd, -- traceRcvrFrDnaCugFormat, -- traceRcvrFrDcUserData, -- traceSessionFrVcNotDataXferFromSubnet, -- traceRcvrFrDnaStorageType, -- traceRcvrFrDnaCugType, -- traceSessionFrStorageType, -- traceSessionFrVcDmepValue, -- traceSessionFrVcFrmCongestedToSubnet, -- traceSessionFrVcCallReferenceNumber, -- traceRcvrFrDnaOutDefaultPriority, -- traceRcvrFrDnaOutDefaultPathReliability, -- traceRcvrFrDnaIncCalls, -- traceSessionFrVcState, -- traceSessionFrVcRowStatus, -- traceSessionFrVcCalledLcn, -- traceSessionFrVcRcosFromNetwork, -- traceRcvrFrDnaCugIncCalls, -- traceRcvrFrDnaCugRowStatus, -- traceSessionFrVcDuplicatesFromSubnet, -- traceSessionFrVcMaxSubnetPktSize, -- traceSessionFrVcStartTime, -- traceSessionFrVcEmissionPriorityToNetwork, -- traceSessionFrVcDiagnosticCode, -- traceRcvrFrStorageType, -- traceRcvrFrDnaRowStatus, -- traceRcvrFrDnaCugPrivileged, -- traceSessionFrVcFrmLossTimeouts, -- traceRcvrFrDcStorageType, -- traceSessionFrRowStatus, -- traceRcvrFrDnaDefaultSendToNetworkPacketSize, -- traceSessionFrVcPeakOoSeqByteCount, -- traceSessionFrVcStorageType } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." frTraceRcvrGroup OBJECT IDENTIFIER ::= { frTraceRcvrMIB 1 } frTraceRcvrGroupBE OBJECT IDENTIFIER ::= { frTraceRcvrGroup 5 } frTraceRcvrGroupBE01 OBJECT IDENTIFIER ::= { frTraceRcvrGroupBE 2 } frTraceRcvrGroupBE01A OBJECT IDENTIFIER ::= { frTraceRcvrGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 FrTraceRcvr." -- STATUS mandatory -- DESCRIPTION "FrTraceRcvr MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-FrTraceRcvrMIB -- INCLUDES { frTraceRcvrGroupBE01A } frTraceRcvrCapabilities OBJECT IDENTIFIER ::= { frTraceRcvrMIB 3 } frTraceRcvrCapabilitiesBE OBJECT IDENTIFIER ::= { frTraceRcvrCapabilities 5 } frTraceRcvrCapabilitiesBE01 OBJECT IDENTIFIER ::= { frTraceRcvrCapabilitiesBE 2 } frTraceRcvrCapabilitiesBE01A OBJECT IDENTIFIER ::= { frTraceRcvrCapabilitiesBE01 2 } END