Nortel-Magellan-Passport-CallRedirectionMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, NonReplicated, Link, AsciiStringIndex FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9904150000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- CallRedirection Enterprise MIB." callRedirectionMIB OBJECT IDENTIFIER ::= { passportMIBs 132 } -- CallRedirectionServer -- The CallRedirectionServer component provides a set of alternate -- destinations for an original address. The alternate destination could -- be DPRS routing information (that is, RID/MID) or up to seven -- addresses. crs OBJECT IDENTIFIER ::= { components 132 } crsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of crs components." ::= { crs 1 } crsRowStatusEntry OBJECT-TYPE SYNTAX CrsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single crs component." INDEX { crsIndex } ::= { crsRowStatusTable 1 } CrsRowStatusEntry ::= SEQUENCE { crsRowStatus RowStatus, crsComponentName DisplayString, crsStorageType StorageType, crsIndex NonReplicated } crsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of crs components. These components can be added and deleted." ::= { crsRowStatusEntry 1 } crsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { crsRowStatusEntry 2 } crsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the crs tables." ::= { crsRowStatusEntry 4 } crsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the crs tables." ::= { crsRowStatusEntry 10 } crsProvTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Provisioned group contains provisionable attributes of the CallRedirectionServer component." ::= { crs 10 } crsProvEntry OBJECT-TYPE SYNTAX CrsProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the crsProvTable." INDEX { crsIndex } ::= { crsProvTable 1 } CrsProvEntry ::= SEQUENCE { crsLogicalProcessor Link } crsLogicalProcessor OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the logical processor on which the call redirection server process is to run." ::= { crsProvEntry 2 } crsStateTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { crs 11 } crsStateEntry OBJECT-TYPE SYNTAX CrsStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the crsStateTable." INDEX { crsIndex } ::= { crsStateTable 1 } CrsStateEntry ::= SEQUENCE { crsAdminState INTEGER, crsOperationalState INTEGER, crsUsageState INTEGER } crsAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { crsStateEntry 1 } crsOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { crsStateEntry 2 } crsUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { crsStateEntry 3 } crsStatTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The Statistics operational group defines the statistics associated with the CallRedirectionServer component." ::= { crs 12 } crsStatEntry OBJECT-TYPE SYNTAX CrsStatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the crsStatTable." INDEX { crsIndex } ::= { crsStatTable 1 } CrsStatEntry ::= SEQUENCE { crsTotalAddresses Unsigned32, crsRequestsReceived Counter32, crsPrimaryMatches Counter32, crsSecAddressListExhausted Counter32, crsMaxAddrLenExceeded Counter32, crsSecRidMidUnsuccessful Counter32, crsSecAddrUnsuccessful Counter32, crsRidRedirected Counter32, crsRidMidRedirected Counter32, crsAddressRedirected Counter32, crsAltRidUnsuccessful Counter32 } crsTotalAddresses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "The totalAddresses attribute indicates the number of PrimaryAddress components associated with the CallRedirectionServer component." DEFVAL { 0 } ::= { crsStatEntry 2 } crsRequestsReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The requestsReceived attribute counts the number of redirection requests received by the CallRedirectionServer component. This counter wraps to 0 when it exceeds its maximum value." ::= { crsStatEntry 3 } crsPrimaryMatches OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The primaryMatches attribute counts the Call Redirection Server attempts to find a matching PrimaryAddress where the lookup attempt was successful. This counter wraps to 0 when it exceeds its maximum value." ::= { crsStatEntry 4 } crsSecAddressListExhausted OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The secAddressListExhausted attribute counts the Call Redirection Server attempts to find a SecondaryAddress component given a PrimaryAddress component where the lookup attempt resulted in the exhaustion of the secondary redirection list. This counter wraps to 0 when it exceeds its maximum value." ::= { crsStatEntry 5 } crsMaxAddrLenExceeded OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The maxAddrLenExceeded attribute counts how often the concatenation of the secondary address and the suffix digits from the original called address have exceeded the maximum of 15 digits. The suffix digits can be determined by removing the primary address digits from the front of the original called address. If appending the suffix digits to a secondary address causes the resulting address to exceed 15 digits, this secondary member is skipped and the next secondary member is tried." ::= { crsStatEntry 6 } crsSecRidMidUnsuccessful OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The secRidMidUnsuccessful attribute counts the number of RID/ MID redirections resulting in the destination address not being reached. This situation could occur when the destination address does not exist on the specified module or the specified module could not be reached." ::= { crsStatEntry 7 } crsSecAddrUnsuccessful OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The secAddrUnsuccessful attribute counts the number of Address redirections resulting in the destination user not being reached. This situation could occur when the destination user line is disabled, the destination address does not exist on the specified module, or the specified module could not be reached." ::= { crsStatEntry 8 } crsRidRedirected OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The ridRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another RID specified by the AlternateRid component. This counter wraps to 0 when it exceeds its maximum value." ::= { crsStatEntry 9 } crsRidMidRedirected OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The ridMidRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another RID/MID specified by the SecondaryRidMid component. This counter wraps to 0 when it exceeds its maximum value." ::= { crsStatEntry 10 } crsAddressRedirected OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The addressRedirected attribute counts requests received by the Call Redirection Server resulting in the request being redirected to another Address specified by the SecondaryAddress component. This counter wraps to 0 when it exceeds its maximum value." ::= { crsStatEntry 11 } crsAltRidUnsuccessful OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The altRidUnsuccessful attribute counts the number of RID redirections resulting in the destination address not being reached. This situation could occur when the alternate RID cannot be reached, the module hosting the destination address is isolated, or the port associated with the secondary address is unavailable at the alternate RID." ::= { crsStatEntry 12 } -- Crs PrimaryAddress/
-- The PrimaryAddress component defines a primary address for -- which a list of alternate destinations are specified. This primary -- address has either a secondary RID/MID destination or up to seven -- secondary addresses associated with it. -- A primary address matches the original destination address if, -- beginning with the most significant digit, all digits are identical and -- the primary address is less than or equal to the original destination -- address in length. The "best match" is the longest such primary -- address. -- The PrimaryAddress component instance value takes the form: -- x. or e. crsPAddr OBJECT IDENTIFIER ::= { crs 2 } crsPAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsPAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of crsPAddr components." ::= { crsPAddr 1 } crsPAddrRowStatusEntry OBJECT-TYPE SYNTAX CrsPAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single crsPAddr component." INDEX { crsIndex, crsPAddrIndex } ::= { crsPAddrRowStatusTable 1 } CrsPAddrRowStatusEntry ::= SEQUENCE { crsPAddrRowStatus RowStatus, crsPAddrComponentName DisplayString, crsPAddrStorageType StorageType, crsPAddrIndex AsciiStringIndex } crsPAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of crsPAddr components. These components can be added and deleted." ::= { crsPAddrRowStatusEntry 1 } crsPAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { crsPAddrRowStatusEntry 2 } crsPAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the crsPAddr tables." ::= { crsPAddrRowStatusEntry 4 } crsPAddrIndex OBJECT-TYPE SYNTAX AsciiStringIndex (SIZE (1..17)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the crsPAddr tables." ::= { crsPAddrRowStatusEntry 10 } -- Crs Paddr/
SecondaryRidMid -- The SecondaryRidMid component identifies an alternate destination -- module on which the primary address is also supported. RID/MID -- redirection allows the call redirection server to effectively override -- the original destination identified by the call routing system and -- forward the call to a different module. crsPAddrSRidMid OBJECT IDENTIFIER ::= { crsPAddr 2 } crsPAddrSRidMidRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsPAddrSRidMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of crsPAddrSRidMid components." ::= { crsPAddrSRidMid 1 } crsPAddrSRidMidRowStatusEntry OBJECT-TYPE SYNTAX CrsPAddrSRidMidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single crsPAddrSRidMid component." INDEX { crsIndex, crsPAddrIndex, crsPAddrSRidMidIndex } ::= { crsPAddrSRidMidRowStatusTable 1 } CrsPAddrSRidMidRowStatusEntry ::= SEQUENCE { crsPAddrSRidMidRowStatus RowStatus, crsPAddrSRidMidComponentName DisplayString, crsPAddrSRidMidStorageType StorageType, crsPAddrSRidMidIndex NonReplicated } crsPAddrSRidMidRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of crsPAddrSRidMid components. These components can be added and deleted." ::= { crsPAddrSRidMidRowStatusEntry 1 } crsPAddrSRidMidComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { crsPAddrSRidMidRowStatusEntry 2 } crsPAddrSRidMidStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the crsPAddrSRidMid tables." ::= { crsPAddrSRidMidRowStatusEntry 4 } crsPAddrSRidMidIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the crsPAddrSRidMid tables." ::= { crsPAddrSRidMidRowStatusEntry 10 } crsPAddrSRidMidRidMidProvTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsPAddrSRidMidRidMidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SecRidMidProv group defines the secondary RID/MID pair associated with a specific primary address." ::= { crsPAddrSRidMid 10 } crsPAddrSRidMidRidMidProvEntry OBJECT-TYPE SYNTAX CrsPAddrSRidMidRidMidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the crsPAddrSRidMidRidMidProvTable." INDEX { crsIndex, crsPAddrIndex, crsPAddrSRidMidIndex } ::= { crsPAddrSRidMidRidMidProvTable 1 } CrsPAddrSRidMidRidMidProvEntry ::= SEQUENCE { crsPAddrSRidMidRoutingId Unsigned32, crsPAddrSRidMidModuleId Unsigned32 } crsPAddrSRidMidRoutingId OBJECT-TYPE SYNTAX Unsigned32 (1..126) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a group of one or more interconnected nodes (called a subnet) to which the primary address is redirected." ::= { crsPAddrSRidMidRidMidProvEntry 2 } crsPAddrSRidMidModuleId OBJECT-TYPE SYNTAX Unsigned32 (1..1909) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a Passport node to which the primary address is redirected." ::= { crsPAddrSRidMidRidMidProvEntry 3 } -- Crs Paddr/
SecondaryAddress/n -- The SecondaryAddress component identifies an alternate destination -- address. Address redirection allows the call redirection server to -- effectively override the original destination address and forward the -- call to a different destination within the Passport network. crsPAddrSAddr OBJECT IDENTIFIER ::= { crsPAddr 3 } crsPAddrSAddrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsPAddrSAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of crsPAddrSAddr components." ::= { crsPAddrSAddr 1 } crsPAddrSAddrRowStatusEntry OBJECT-TYPE SYNTAX CrsPAddrSAddrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single crsPAddrSAddr component." INDEX { crsIndex, crsPAddrIndex, crsPAddrSAddrIndex } ::= { crsPAddrSAddrRowStatusTable 1 } CrsPAddrSAddrRowStatusEntry ::= SEQUENCE { crsPAddrSAddrRowStatus RowStatus, crsPAddrSAddrComponentName DisplayString, crsPAddrSAddrStorageType StorageType, crsPAddrSAddrIndex Integer32 } crsPAddrSAddrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of crsPAddrSAddr components. These components can be added and deleted." ::= { crsPAddrSAddrRowStatusEntry 1 } crsPAddrSAddrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { crsPAddrSAddrRowStatusEntry 2 } crsPAddrSAddrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the crsPAddrSAddr tables." ::= { crsPAddrSAddrRowStatusEntry 4 } crsPAddrSAddrIndex OBJECT-TYPE SYNTAX Integer32 (1..7) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the crsPAddrSAddr tables." ::= { crsPAddrSAddrRowStatusEntry 10 } crsPAddrSAddrSecAddrProvTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsPAddrSAddrSecAddrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The SecAddrProv group defines one of the secondary addresses associated with a specific primary address." ::= { crsPAddrSAddr 10 } crsPAddrSAddrSecAddrProvEntry OBJECT-TYPE SYNTAX CrsPAddrSAddrSecAddrProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the crsPAddrSAddrSecAddrProvTable." INDEX { crsIndex, crsPAddrIndex, crsPAddrSAddrIndex } ::= { crsPAddrSAddrSecAddrProvTable 1 } CrsPAddrSAddrSecAddrProvEntry ::= SEQUENCE { crsPAddrSAddrAddress AsciiString } crsPAddrSAddrAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..17)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a secondary address to which the primary address is redirected. The address attribute includes the Numbering Plan Indicator (NPI) and the digits which form a unique identifier of the customer interface. The address may belong to the X.121 or E.164 addressing plan. Address digits are selected and assigned by network operators. The address attribute takes the form: x. or e." ::= { crsPAddrSAddrSecAddrProvEntry 3 } -- Crs AlternateRid -- The AlternateRid component defines the routing identifier value that -- is used as the alternate DPRS routing information when routing to -- the RID specified by the Call Router (CR) is unsuccessful. This -- component should only be provisioned as a temporary -- measure.When activated the RID redirection feature as significant -- impact on the normal redirection operation, since RID redirection is -- always attempted first. -- One of the possible application of this feature being RID splitting, -- the AlternateRid component should be deleted as soon as all module -- have been migrated from their original RID and the Call Router -- (CR) throughout the network have been updated with the new RID -- information. crsAltRid OBJECT IDENTIFIER ::= { crs 3 } crsAltRidRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsAltRidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of crsAltRid components." ::= { crsAltRid 1 } crsAltRidRowStatusEntry OBJECT-TYPE SYNTAX CrsAltRidRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single crsAltRid component." INDEX { crsIndex, crsAltRidIndex } ::= { crsAltRidRowStatusTable 1 } CrsAltRidRowStatusEntry ::= SEQUENCE { crsAltRidRowStatus RowStatus, crsAltRidComponentName DisplayString, crsAltRidStorageType StorageType, crsAltRidIndex NonReplicated } crsAltRidRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of crsAltRid components. These components can be added and deleted." ::= { crsAltRidRowStatusEntry 1 } crsAltRidComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { crsAltRidRowStatusEntry 2 } crsAltRidStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the crsAltRid tables." ::= { crsAltRidRowStatusEntry 4 } crsAltRidIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the crsAltRid tables." ::= { crsAltRidRowStatusEntry 10 } crsAltRidAltRidProvTable OBJECT-TYPE SYNTAX SEQUENCE OF CrsAltRidAltRidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The AltRidProv group defines the alternate RID associated with the Crs component." ::= { crsAltRid 10 } crsAltRidAltRidProvEntry OBJECT-TYPE SYNTAX CrsAltRidAltRidProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the crsAltRidAltRidProvTable." INDEX { crsIndex, crsAltRidIndex } ::= { crsAltRidAltRidProvTable 1 } CrsAltRidAltRidProvEntry ::= SEQUENCE { crsAltRidRoutingId Unsigned32 } crsAltRidRoutingId OBJECT-TYPE SYNTAX Unsigned32 (1..126) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies a group of one or more interconnected nodes (called a subnet) to which the request is redirected." ::= { crsAltRidAltRidProvEntry 2 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { crsTotalAddresses, -- crsPAddrRowStatus, -- crsPAddrSRidMidRoutingId, -- crsUsageState, -- crsAltRidRoutingId, -- crsOperationalState, -- crsPAddrSRidMidModuleId, -- crsComponentName, -- crsRidMidRedirected, -- crsRequestsReceived, -- crsMaxAddrLenExceeded, -- crsAddressRedirected, -- crsStorageType, -- crsAltRidRowStatus, -- crsPAddrSAddrRowStatus, -- crsAltRidStorageType, -- crsPAddrComponentName, -- crsPAddrSRidMidRowStatus, -- crsPAddrStorageType, -- crsLogicalProcessor, -- crsAdminState, -- crsSecAddrUnsuccessful, -- crsAltRidUnsuccessful, -- crsSecAddressListExhausted, -- crsPAddrSAddrComponentName, -- crsSecRidMidUnsuccessful, -- crsRowStatus, -- crsPAddrSRidMidComponentName, -- crsPAddrSAddrStorageType, -- crsAltRidComponentName, -- crsRidRedirected, -- crsPAddrSAddrAddress, -- crsPrimaryMatches, -- crsPAddrSRidMidStorageType } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." callRedirectionGroup OBJECT IDENTIFIER ::= { callRedirectionMIB 1 } callRedirectionGroupBE OBJECT IDENTIFIER ::= { callRedirectionGroup 5 } callRedirectionGroupBE01 OBJECT IDENTIFIER ::= { callRedirectionGroupBE 2 } callRedirectionGroupBE01A OBJECT IDENTIFIER ::= { callRedirectionGroupBE01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 CallRedirection." -- STATUS mandatory -- DESCRIPTION "CallRedirection MIB: MIB Version BE01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-CallRedirectionMIB -- INCLUDES { callRedirectionGroupBE01A } callRedirectionCapabilities OBJECT IDENTIFIER ::= { callRedirectionMIB 3 } callRedirectionCapabilitiesBE OBJECT IDENTIFIER ::= { callRedirectionCapabilities 5 } callRedirectionCapabilitiesBE01 OBJECT IDENTIFIER ::= { callRedirectionCapabilitiesBE 2 } callRedirectionCapabilitiesBE01A OBJECT IDENTIFIER ::= { callRedirectionCapabilitiesBE01 2 } END