Nortel-Magellan-Passport-BaseSnmpMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 IpAddress FROM RFC1155-SMI passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB TruthValue, DisplayString, StorageType, RowStatus, Status, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB AsciiString, NonReplicated, HexString FROM Nortel-Magellan-Passport-TextualConventionsMIB vrIndex, vr FROM Nortel-Magellan-Passport-VirtualRouterMIB; -- LAST-UPDATED "9706300000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- BaseSnmp Enterprise MIB." baseSnmpMIB OBJECT IDENTIFIER ::= { passportMIBs 36 } -- Vr/Vr_String Snmp -- This component contains all provisionable and operational data -- relating to the SNMP Management of a Virtual Router. -- If the Vr/Vr_String SnmpInitialConfiguration component exists and -- its agentAddress and managerAddress attributes have been set then -- when this component is added, initial instances of SnmpV2Acl, -- SnmpV2Party, SnmpV2Context, and SnmpView components will be -- added automatically. vrSnmp OBJECT IDENTIFIER ::= { vr 8 } vrSnmpRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmp components." ::= { vrSnmp 1 } vrSnmpRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmp component." INDEX { vrIndex, vrSnmpIndex } ::= { vrSnmpRowStatusTable 1 } VrSnmpRowStatusEntry ::= SEQUENCE { vrSnmpRowStatus RowStatus, vrSnmpComponentName DisplayString, vrSnmpStorageType StorageType, vrSnmpIndex NonReplicated } vrSnmpRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmp components. These components can be added and deleted." ::= { vrSnmpRowStatusEntry 1 } vrSnmpComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpRowStatusEntry 2 } vrSnmpStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmp tables." ::= { vrSnmpRowStatusEntry 4 } vrSnmpIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrSnmp tables." ::= { vrSnmpRowStatusEntry 10 } vrSnmpProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes defining the SNMP management entity's capabilities, particularly in regards to standardV1 and V2 traps." ::= { vrSnmp 20 } vrSnmpProvEntry OBJECT-TYPE SYNTAX VrSnmpProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpProvTable." INDEX { vrIndex, vrSnmpIndex } ::= { vrSnmpProvTable 1 } VrSnmpProvEntry ::= SEQUENCE { vrSnmpV1EnableAuthenTraps Status, vrSnmpV2EnableAuthenTraps Status, vrSnmpAlarmsAsTraps Status, vrSnmpIpStack INTEGER, vrSnmpCidInEntTraps Status } vrSnmpV1EnableAuthenTraps OBJECT-TYPE SYNTAX Status ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls whether the Snmp component will generate V1 authentication failure traps or not. The attribute is derived from rfc1213." ::= { vrSnmpProvEntry 1 } vrSnmpV2EnableAuthenTraps OBJECT-TYPE SYNTAX Status ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls whether the Snmp component will generate V2 authentication failure traps or not. The attribute is derived from rfc1450." ::= { vrSnmpProvEntry 2 } vrSnmpAlarmsAsTraps OBJECT-TYPE SYNTAX Status ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls whether the Snmp component will send Alarms as SNMPv1 and SNMPv2 Traps. If enabled, Alarms will be sent as SNMPv2 Traps to target Parties identified in AccessPrivileges components where v2Trap privileges are allowed, and as SNMPv1 Traps to Managers with v1Trap privileges allowed." ::= { vrSnmpProvEntry 3 } vrSnmpIpStack OBJECT-TYPE SYNTAX INTEGER { vrIp(1), ipiFrIpiVc(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls which IP stack the Snmp component will use to send and receive Snmp traffic for Communites and Parties whose tdomain attribute specifies snmpUdpDomain as the transport protocol. If the value of this attribute is vrIp then Snmp Udp traffic will be sent and received using Ip as provisioned under the VirtualRouter. This requires provisioning of the ip feature. If the value of this attribute is ipiFrIpiVc then Snmp Udp traffic will be sent and received using IpiFr (Ip over Frame Relay) or IpiVc (Ip over Vc), whichever is provisioned. This requires provisioning of one of the ipiVc or ipiFr features." DEFVAL { vrIp } ::= { vrSnmpProvEntry 4 } vrSnmpCidInEntTraps OBJECT-TYPE SYNTAX Status ACCESS read-write STATUS mandatory DESCRIPTION "This attribute controls whether the Customer Identifier (CID) will be included in the SNMP Enterprise Traps. If enabled, the CID will be included in the SNMP Enterprise traps." ::= { vrSnmpProvEntry 5 } vrSnmpStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241- 7001-150, Passport Operations and Maintenance Guide." ::= { vrSnmp 21 } vrSnmpStateEntry OBJECT-TYPE SYNTAX VrSnmpStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpStateTable." INDEX { vrIndex, vrSnmpIndex } ::= { vrSnmpStateTable 1 } VrSnmpStateEntry ::= SEQUENCE { vrSnmpAdminState INTEGER, vrSnmpOperationalState INTEGER, vrSnmpUsageState INTEGER, vrSnmpAvailabilityStatus OCTET STRING, vrSnmpProceduralStatus OCTET STRING, vrSnmpControlStatus OCTET STRING, vrSnmpAlarmStatus OCTET STRING, vrSnmpStandbyStatus INTEGER, vrSnmpUnknownStatus INTEGER } vrSnmpAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { unlocked } ::= { vrSnmpStateEntry 1 } vrSnmpOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { disabled } ::= { vrSnmpStateEntry 2 } vrSnmpUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time. The OSI Status attributes, if supported by the component, may provide more details, qualifying the state of the component." DEFVAL { idle } ::= { vrSnmpStateEntry 3 } vrSnmpAvailabilityStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (2)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value inTest indicates that the resource is undergoing a test procedure. If adminState is locked or shuttingDown, the normal users are precluded from using the resource and controlStatus is reservedForTest. Tests that do not exclude additional users can be present in any operational or administrative state but the reservedForTest condition should not be present. The value failed indicates that the component has an internal fault that prevents it from operating. The operationalState is disabled. The value dependency indicates that the component cannot operate because some other resource on which it depends is unavailable. The operationalState is disabled. The value powerOff indicates the resource requires power to be applied and it is not powered on. The operationalState is disabled. The value offLine indicates the resource requires a routine operation (either manual, automatic, or both) to be performed to place it on-line and make it available for use. The operationalState is disabled. The value offDuty indicates the resource is inactive in accordance with a predetermined time schedule. In the absence of other disabling conditions, the operationalState is enabled or disabled. The value degraded indicates the service provided by the component is degraded in some way, such as in speed or operating capacity. However, the resource remains available for service. The operationalState is enabled. The value notInstalled indicates the resource is not present. The operationalState is disabled. The value logFull is not used. Description of bits: inTest(0) failed(1) powerOff(2) offLine(3) offDuty(4) dependency(5) degraded(6) notInstalled(7) logFull(8)" ::= { vrSnmpStateEntry 4 } vrSnmpProceduralStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value initializationRequired indicates (for a resource which doesn't initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState is disabled. The value notInitialized indicates (for a resource which does initialize autonomously) that initialization is required before it can perform its normal functions, and this procedure has not been initiated. The operationalState may be enabled or disabled. The value initializing indicates that initialization has been initiated but is not yet complete. The operationalState may be enabled or disabled. The value reporting indicates the resource has completed some processing operation and is notifying the results. The operationalState is enabled. The value terminating indicates the component is in a termination phase. If the resource doesn't reinitialize autonomously, operationalState is disabled; otherwise it is enabled or disabled. Description of bits: initializationRequired(0) notInitialized(1) initializing(2) reporting(3) terminating(4)" ::= { vrSnmpStateEntry 5 } vrSnmpControlStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value subjectToTest indicates the resource is available but tests may be conducted simultaneously at unpredictable times, which may cause it to exhibit unusual characteristics. The value partOfServicesLocked indicates that part of the service is restricted from users of a resource. The adminState is unlocked. The value reservedForTest indicates that the component is administratively unavailable because it is undergoing a test procedure. The adminState is locked. The value suspended indicates that the service has been administratively suspended. Description of bits: subjectToTest(0) partOfServicesLocked(1) reservedForTest(2) suspended(3)" ::= { vrSnmpStateEntry 6 } vrSnmpAlarmStatus OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either the attribute is not supported or that none of the status conditions described below are present. The value underRepair indicates the component is currently being repaired. The operationalState is enabled or disabled. The value critical indicates one or more critical alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value major indicates one or more major alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value minor indicates one or more minor alarms are outstanding against the component. Other, less severe, alarms may also be outstanding. The operationalState is enabled or disabled. The value alarmOutstanding generically indicates that an alarm of some severity is outstanding against the component. Description of bits: underRepair(0) critical(1) major(2) minor(3) alarmOutstanding(4)" ::= { vrSnmpStateEntry 7 } vrSnmpStandbyStatus OBJECT-TYPE SYNTAX INTEGER { hotStandby(0), coldStandby(1), providingService(2), notSet(15) } ACCESS read-only STATUS mandatory DESCRIPTION "If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a non-standard value, used because the original specification indicated this attribute was set-valued and thus, did not provide a value to indicate that none of the other three are applicable. The value hotStandby indicates that the resource is not providing service but will be immediately able to take over the role of the resource to be backed up, without initialization activity, and containing the same information as the resource to be backed up. The value coldStandby indicates the resource is a backup for another resource but will not be immediately able to take over the role of the backed up resource and will require some initialization activity. The value providingService indicates that this component, as a backup resource, is currently backing up another resource." DEFVAL { notSet } ::= { vrSnmpStateEntry 8 } vrSnmpUnknownStatus OBJECT-TYPE SYNTAX INTEGER { false(0), true(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not known for sure." DEFVAL { false } ::= { vrSnmpStateEntry 9 } vrSnmpStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains miscellaneous SNMP management entity operational attributes. Statistics in the group are derived from rfc 1450 and rfc 1213. Also included in the group are statistics due to non-SNMP authorization errors, and non-SNMP statistics." ::= { vrSnmp 22 } vrSnmpStatsEntry OBJECT-TYPE SYNTAX VrSnmpStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpStatsTable." INDEX { vrIndex, vrSnmpIndex } ::= { vrSnmpStatsTable 1 } VrSnmpStatsEntry ::= SEQUENCE { vrSnmpLastOrChange Unsigned32, vrSnmpTrapsProcessed Unsigned32, vrSnmpTrapsDiscarded Unsigned32, vrSnmpLastAuthFailure Unsigned32, vrSnmpMgrOfLastAuthFailure IpAddress } vrSnmpLastOrChange OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the value of sysUpTime (in 1/100's of a second) at the time of the most recent change to a SNMPv2 Object Resource entry. The attribute forms part of the SNMPv2 MIB Base Object Resource Group found in rfc1450." ::= { vrSnmpStatsEntry 1 } vrSnmpTrapsProcessed OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This counter contains the cumulative number of Trap Indications and Alarm Indications received from the DCS Collectors since the processor last restarted. These Traps and Alarms are sent to SNMPv1 Managers and SNMPv2 Parties which are configured to receive Traps. This total includes the number discarded by the Snmp component when it was locked or disabled." DEFVAL { 0 } ::= { vrSnmpStatsEntry 2 } vrSnmpTrapsDiscarded OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This counter contains the cumulative number of Trap Indications and Alarm Indications discarded since the processor last restarted. They are discarded when the Snmp component is locked or disabled." DEFVAL { 0 } ::= { vrSnmpStatsEntry 3 } vrSnmpLastAuthFailure OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the value of sysUpTime (in 1/100's of a second) at the time the last authentication failure. This attribute is a non-SNMP statistic." DEFVAL { 0 } ::= { vrSnmpStatsEntry 4 } vrSnmpMgrOfLastAuthFailure OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the IP address of the manager station that caused the last authentication failure. This attribute is a non-SNMP statistic." DEFVAL { '00000000'H } -- "0.0.0.0" ::= { vrSnmpStatsEntry 5 } -- VirtualRouter/string Snmp System -- This component represents the SNMP System Group. The -- component attributes are derived from rfc1213. vrSnmpSys OBJECT IDENTIFIER ::= { vrSnmp 2 } vrSnmpSysRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpSysRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmpSys components." ::= { vrSnmpSys 1 } vrSnmpSysRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpSysRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmpSys component." INDEX { vrIndex, vrSnmpIndex, vrSnmpSysIndex } ::= { vrSnmpSysRowStatusTable 1 } VrSnmpSysRowStatusEntry ::= SEQUENCE { vrSnmpSysRowStatus RowStatus, vrSnmpSysComponentName DisplayString, vrSnmpSysStorageType StorageType, vrSnmpSysIndex NonReplicated } vrSnmpSysRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpSys components. These components cannot be added nor deleted." ::= { vrSnmpSysRowStatusEntry 1 } vrSnmpSysComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpSysRowStatusEntry 2 } vrSnmpSysStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmpSys tables." ::= { vrSnmpSysRowStatusEntry 4 } vrSnmpSysIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrSnmpSys tables." ::= { vrSnmpSysRowStatusEntry 10 } vrSnmpSysProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpSysProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The group contains provisionable attributes relating to the SNMP System Group. The attributes are derived from rfc1213." ::= { vrSnmpSys 10 } vrSnmpSysProvEntry OBJECT-TYPE SYNTAX VrSnmpSysProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpSysProvTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpSysIndex } ::= { vrSnmpSysProvTable 1 } VrSnmpSysProvEntry ::= SEQUENCE { vrSnmpSysContact AsciiString, vrSnmpSysName AsciiString, vrSnmpSysLocation AsciiString } vrSnmpSysContact OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the contact person for this managed node, together with information on how to contact this person." ::= { vrSnmpSysProvEntry 1 } vrSnmpSysName OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the administratively assigned name for this managed node. By convention, it is the node's fully qualified domain name." ::= { vrSnmpSysProvEntry 2 } vrSnmpSysLocation OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the physical location of this node. For example, 'telephone closet, third floor'." ::= { vrSnmpSysProvEntry 3 } vrSnmpSysOpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpSysOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The group contains operational attributes relating to the SNMP System Group. The attributes are derived from rfc1213." ::= { vrSnmpSys 11 } vrSnmpSysOpEntry OBJECT-TYPE SYNTAX VrSnmpSysOpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpSysOpTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpSysIndex } ::= { vrSnmpSysOpTable 1 } VrSnmpSysOpEntry ::= SEQUENCE { vrSnmpSysDescription AsciiString, vrSnmpSysObjectId OBJECT IDENTIFIER, vrSnmpSysUpTime Unsigned32, vrSnmpSysServices Unsigned32 } vrSnmpSysDescription OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute presents a textual description of the entity. This value should include the full name and version identification of the system's hardware type, software operating-system, and networking software." ::= { vrSnmpSysOpEntry 1 } vrSnmpSysObjectId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute identifies the vendor's authoritative identification of the network management subsystem contained in the entity. This value is allocated within the Structure of Management Information (SMI) enterprises subtree (1.3.6.1.4.1) and provides an easy and unambiguous means for determining 'what kind of box' is being managed." ::= { vrSnmpSysOpEntry 2 } vrSnmpSysUpTime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the time (in hundredths of a second) since the network management portion of the system was last re- initialized." ::= { vrSnmpSysOpEntry 3 } vrSnmpSysServices OBJECT-TYPE SYNTAX Unsigned32 (0..127) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the set of services that this entity primarily offers. The value is a sum. This sum initially takes the value zero, then, for each layer, L, in the range 1 through 7, that this node performs transactions for, 2 raised to (L-1) is added to the sum. For example, a node which performs primarily routing functions would have a value of 4 (2^(3-1)). In contrast, a node which is a host offering application services would have a value of 72 ((2^4-1) + 2^(7-1)). Note that in the context of the Internet suite of protocols, values should be calculated accordingly: layer 1 - physical (for example, repeaters) layer 2 - datalink/subnetwork (for example, bridges) layer 3 - internet (for example, IP gateways) layer 4 - end-to-end (for example, IP hosts) layer 7 - applications (for example, mail relays) For systems including OSI protocols, layers 5 and 6 may also be counted." DEFVAL { 6 } ::= { vrSnmpSysOpEntry 4 } -- VirtualRouter/string Snmp Community/n -- This component represents an SNMPv1 Community. A community -- represents a pairing of an SNMP Agent with an arbitrary set of -- application entities. -- The combination of communityString and tDomain attributes must -- be unique across all Communies. vrSnmpCom OBJECT IDENTIFIER ::= { vrSnmp 3 } vrSnmpComRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpComRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmpCom components." ::= { vrSnmpCom 1 } vrSnmpComRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpComRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmpCom component." INDEX { vrIndex, vrSnmpIndex, vrSnmpComIndex } ::= { vrSnmpComRowStatusTable 1 } VrSnmpComRowStatusEntry ::= SEQUENCE { vrSnmpComRowStatus RowStatus, vrSnmpComComponentName DisplayString, vrSnmpComStorageType StorageType, vrSnmpComIndex Integer32 } vrSnmpComRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpCom components. These components can be added and deleted." ::= { vrSnmpComRowStatusEntry 1 } vrSnmpComComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpComRowStatusEntry 2 } vrSnmpComStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmpCom tables." ::= { vrSnmpComRowStatusEntry 4 } vrSnmpComIndex OBJECT-TYPE SYNTAX Integer32 (1..1024) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrSnmpCom tables." ::= { vrSnmpComRowStatusEntry 10 } vrSnmpComProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpComProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The group contains provisionable attributes relating to SNMPv1 Communities." ::= { vrSnmpCom 10 } vrSnmpComProvEntry OBJECT-TYPE SYNTAX VrSnmpComProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpComProvTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpComIndex } ::= { vrSnmpComProvTable 1 } VrSnmpComProvEntry ::= SEQUENCE { vrSnmpComCommunityString AsciiString, vrSnmpComAccessMode INTEGER, vrSnmpComViewIndex Unsigned32, vrSnmpComTDomain INTEGER } vrSnmpComCommunityString OBJECT-TYPE SYNTAX AsciiString (SIZE (1..255)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the SNMPv1 Community name. The value of this attribute is used to authenticate SNMP messages received from SNMPv1 management entities, and is placed in SNMP messages sent out by the SNMPv1 network management entity. The string 'public' is commonly used. When an SNMPv1 message is received, the community name in the message is checked to ensure that it matches a Community string. If there are no Manager subcomponents for that Community then the level of access is determined by the accessMode attribute. If there are Manager subcomponents for the Community then the originating transport address in the message must match the transportAddress of one of the Manager subcomponents, and the level of access of the sending entity is determined by the privileges attribute for that Manager. The combination of communityString and tDomain attributes must be unique across all Communies." DEFVAL { '7075626c6963'H } -- "public" ::= { vrSnmpComProvEntry 1 } vrSnmpComAccessMode OBJECT-TYPE SYNTAX INTEGER { readOnly(1), readWrite(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Once the sending SNMP entity is authenticated as a member of a community, the community access mode determines what level of access it has for each object in its view." DEFVAL { readOnly } ::= { vrSnmpComProvEntry 3 } vrSnmpComViewIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1024) ACCESS read-write STATUS mandatory DESCRIPTION "The community view index selects an entry in the SnmpViewTable that this community will use. This index must correspond to the first index of one of the SnmpView entries. Note that SNMPv2 Views are used for SNMPv1 communities, as the SNMPv2 View model is sufficiently general to handle the SNMPv1 case." ::= { vrSnmpComProvEntry 4 } vrSnmpComTDomain OBJECT-TYPE SYNTAX INTEGER { snmpUdpDomain(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the kind of transport service by which the community receives and sends network management traffic. The combination of communityString and tDomain attributes must be unique across all Communies" DEFVAL { snmpUdpDomain } ::= { vrSnmpComProvEntry 5 } -- VirtualRouter/string Snmp Community/n Manager/n -- This component defines the access privileges for an SNMPv1 -- Manager within the Community. If a Community has no Manager -- components, SNMPv1 messages are accepted from all source -- addresses using the proper communityString, and no Traps are sent -- out using the communityString. If at least one Manager component -- exists for a Community then SNMPv1 messages containing that -- Community string are only accepted if they originate from a -- transport address which matches the transportAddress of one of the -- Manager components. -- The value of transportAddress must be unique for all Manager -- components under the same Community. vrSnmpComMan OBJECT IDENTIFIER ::= { vrSnmpCom 2 } vrSnmpComManRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpComManRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmpComMan components." ::= { vrSnmpComMan 1 } vrSnmpComManRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpComManRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmpComMan component." INDEX { vrIndex, vrSnmpIndex, vrSnmpComIndex, vrSnmpComManIndex } ::= { vrSnmpComManRowStatusTable 1 } VrSnmpComManRowStatusEntry ::= SEQUENCE { vrSnmpComManRowStatus RowStatus, vrSnmpComManComponentName DisplayString, vrSnmpComManStorageType StorageType, vrSnmpComManIndex Integer32 } vrSnmpComManRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpComMan components. These components can be added and deleted." ::= { vrSnmpComManRowStatusEntry 1 } vrSnmpComManComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpComManRowStatusEntry 2 } vrSnmpComManStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmpComMan tables." ::= { vrSnmpComManRowStatusEntry 4 } vrSnmpComManIndex OBJECT-TYPE SYNTAX Integer32 (0..100) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrSnmpComMan tables." ::= { vrSnmpComManRowStatusEntry 10 } vrSnmpComManProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpComManProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The group contains provisionable attributes relating to an SNMPv1 Community Manager." ::= { vrSnmpComMan 10 } vrSnmpComManProvEntry OBJECT-TYPE SYNTAX VrSnmpComManProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpComManProvTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpComIndex, vrSnmpComManIndex } ::= { vrSnmpComManProvTable 1 } VrSnmpComManProvEntry ::= SEQUENCE { vrSnmpComManTransportAddress AsciiString, vrSnmpComManPrivileges OCTET STRING } vrSnmpComManTransportAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..100)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the transport service address of SNMPv1 Manager, formatted according to the value of SnmpV1Community tDomain. The only currently supported format is that of a UDP Transport Address. It must be of the form 'IpAddress-UDP Port', where UDP Port = 162. For example, 23.45.67.89-162 is a suitable UDP Transport Address. The value of transportAddress must be unique for all Manager components under the same Community." ::= { vrSnmpComManProvEntry 1 } vrSnmpComManPrivileges OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute identifies the access privileges which govern what management operations the SNMPv1 Manager may perform. v1trap operations are only allowed if the Community accessMode is readOnly or readWrite. set operations are only allowed if the Community accessMode is readWrite. get operations are only allowed if the Community accessMode is readOnly or readWrite. Description of bits: sets(0) gets(1) v1trap(2)" DEFVAL { '40'H } ::= { vrSnmpComManProvEntry 2 } -- VirtualRouter/string Snmp AccessPrivileges/n,n,n -- This component is used to add SNMPv2 Access Privilege Table -- Entries. The component attributes are derived from rfc1445, and -- rfc1447. -- The target index identifies a SNMPv2 party which is the target of -- an access control policy. This index must correspond to the -- SnmpV2PartyEntry index of a provisioned SnmpV2Party. -- The subject index identifies a SNMPv2 party which is the subject of -- an access control policy. This index must correspond to the -- SnmpV2PartyEntryProv index of one of the provisioned -- SnmpV2Party's. -- If the party identified by target is local (SnmpV2PartyEntryProv -- local = true), then subject must identify a party that is non-local -- (SnmpV2PartyEntryProv local = false). If the party identified by -- target is non-local, then subject must indicate a local party. -- The resources index identifies an SNMPv2 context in an access -- control policy. This index must correspond to the -- SnmpV2ContextEntryProv index of one of the provisioned -- SnmpV2Context's. vrSnmpAcl OBJECT IDENTIFIER ::= { vrSnmp 4 } vrSnmpAclRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpAclRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This entry controls the addition and deletion of vrSnmpAcl components." ::= { vrSnmpAcl 1 } vrSnmpAclRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpAclRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A single entry in the table represents a single vrSnmpAcl component." INDEX { vrIndex, vrSnmpIndex, vrSnmpAclTargetIndex, vrSnmpAclSubjectIndex, vrSnmpAclResourcesIndex } ::= { vrSnmpAclRowStatusTable 1 } VrSnmpAclRowStatusEntry ::= SEQUENCE { vrSnmpAclRowStatus RowStatus, vrSnmpAclComponentName DisplayString, vrSnmpAclStorageType StorageType, vrSnmpAclTargetIndex Integer32, vrSnmpAclSubjectIndex Integer32, vrSnmpAclResourcesIndex Integer32 } vrSnmpAclRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS obsolete DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpAcl components. These components can be added and deleted." ::= { vrSnmpAclRowStatusEntry 1 } vrSnmpAclComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpAclRowStatusEntry 2 } vrSnmpAclStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS obsolete DESCRIPTION "This variable represents the storage type value for the vrSnmpAcl tables." ::= { vrSnmpAclRowStatusEntry 4 } vrSnmpAclTargetIndex OBJECT-TYPE SYNTAX Integer32 (1..2048) ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents an index for the vrSnmpAcl tables." ::= { vrSnmpAclRowStatusEntry 10 } vrSnmpAclSubjectIndex OBJECT-TYPE SYNTAX Integer32 (1..2048) ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents an index for the vrSnmpAcl tables." ::= { vrSnmpAclRowStatusEntry 11 } vrSnmpAclResourcesIndex OBJECT-TYPE SYNTAX Integer32 (1..2048) ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents an index for the vrSnmpAcl tables." ::= { vrSnmpAclRowStatusEntry 12 } vrSnmpAclProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpAclProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This group contains provisionable attributes relating to SNMPv2 Access Privilege Table Entries. The provisionable attributes are derived from rfc1445, and rfc1447." ::= { vrSnmpAcl 10 } vrSnmpAclProvEntry OBJECT-TYPE SYNTAX VrSnmpAclProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vrSnmpAclProvTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpAclTargetIndex, vrSnmpAclSubjectIndex, vrSnmpAclResourcesIndex } ::= { vrSnmpAclProvTable 1 } VrSnmpAclProvEntry ::= SEQUENCE { vrSnmpAclPrivileges OCTET STRING, vrSnmpAclRowStorageType INTEGER, vrSnmpAclStdRowStatus INTEGER } vrSnmpAclPrivileges OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute identifies the access privileges which govern what management operations a particular target part may perform with respect to a particular SNMPv2 context when requested by a particular subject party. Gets and set operations are only permitted if the target Party is local (SnmpV2PartyEntryProv local = true). Response and v2trap operations are only permitted if the target Party is non-local (SnmpV2PartyEntryProv local = false). Description of bits: response(0) set(1) gets(2) v2trap(3)" DEFVAL { '60'H } ::= { vrSnmpAclProvEntry 1 } vrSnmpAclRowStorageType OBJECT-TYPE SYNTAX INTEGER { nonVolatile(3) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates the storage type for this conceptual row in the SNMPv2 aclTable. This is a constant - nonVolatile." DEFVAL { nonVolatile } ::= { vrSnmpAclProvEntry 2 } vrSnmpAclStdRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates the status of this conceptual row in the SNMPv2 aclTable. This is a constant - active." DEFVAL { active } ::= { vrSnmpAclProvEntry 3 } -- VirtualRouter/string Snmp Party/Int_Sequence -- This component is used to add SNMPv2 Party Table Entries. The -- maximum number of Table Entries is 1024. The component -- attributes are derived from rfc1321, rfc1445, rfc1446, rfc1447, -- rfc1449, and rfc1450. vrSnmpParty OBJECT IDENTIFIER ::= { vrSnmp 5 } vrSnmpPartyRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpPartyRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This entry controls the addition and deletion of vrSnmpParty components." ::= { vrSnmpParty 1 } vrSnmpPartyRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpPartyRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A single entry in the table represents a single vrSnmpParty component." INDEX { vrIndex, vrSnmpIndex, vrSnmpPartyIdentityIndex } ::= { vrSnmpPartyRowStatusTable 1 } VrSnmpPartyRowStatusEntry ::= SEQUENCE { vrSnmpPartyRowStatus RowStatus, vrSnmpPartyComponentName DisplayString, vrSnmpPartyStorageType StorageType, vrSnmpPartyIdentityIndex OBJECT IDENTIFIER } vrSnmpPartyRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS obsolete DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpParty components. These components can be added and deleted." ::= { vrSnmpPartyRowStatusEntry 1 } vrSnmpPartyComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpPartyRowStatusEntry 2 } vrSnmpPartyStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS obsolete DESCRIPTION "This variable represents the storage type value for the vrSnmpParty tables." ::= { vrSnmpPartyRowStatusEntry 4 } vrSnmpPartyIdentityIndex OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents the index for the vrSnmpParty tables." ::= { vrSnmpPartyRowStatusEntry 10 } vrSnmpPartyProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpPartyProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This group contains provisionable attributes relating to SNMPv2 Party Table Entries.The attributes are derived from rfc1321, rfc1445, rfc1446, rfc1447, and rfc1450." ::= { vrSnmpParty 10 } vrSnmpPartyProvEntry OBJECT-TYPE SYNTAX VrSnmpPartyProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vrSnmpPartyProvTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpPartyIdentityIndex } ::= { vrSnmpPartyProvTable 1 } VrSnmpPartyProvEntry ::= SEQUENCE { vrSnmpPartyStdIndex Unsigned32, vrSnmpPartyTDomain INTEGER, vrSnmpPartyTransportAddress AsciiString, vrSnmpPartyMaxMessageSize Unsigned32, vrSnmpPartyLocal TruthValue, vrSnmpPartyAuthProtocol INTEGER, vrSnmpPartyAuthPrivate HexString, vrSnmpPartyAuthPublic HexString, vrSnmpPartyAuthLifetime Unsigned32, vrSnmpPartyPrivProtocol INTEGER, vrSnmpPartyRowStorageType INTEGER, vrSnmpPartyStdRowStatus INTEGER } vrSnmpPartyStdIndex OBJECT-TYPE SYNTAX Unsigned32 (1..2048) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the SNMPv2 Party table partyIndex. This index is unique and its value is automatically selected for you." ::= { vrSnmpPartyProvEntry 1 } vrSnmpPartyTDomain OBJECT-TYPE SYNTAX INTEGER { snmpUdpDomain(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates the kind of transport service by which the party receives and sends network management traffic." DEFVAL { snmpUdpDomain } ::= { vrSnmpPartyProvEntry 2 } vrSnmpPartyTransportAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..100)) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is the transport service address by which the party receives network management traffic, formatted according to the corresponding value of tDomain. For local (Agent) Parties (SnmpV2PartyEntryProv local = true) this is the address of the Virtual Router. For non-local (Manager) Parties (SnmpV2PartyEntryProv local = false) this is the address of the SNMP Manager. The only currently supported format is that of a UDP Transport Address. It must be of the form 'IpAddress-UDP Port', where UDP Port = 161 for a local Party and UDP Port = 162 for a non-local Party. For example, 23.45.67.89-161 or 23.45.67.89-162 are suitable UDP Transport Addresses." ::= { vrSnmpPartyProvEntry 3 } vrSnmpPartyMaxMessageSize OBJECT-TYPE SYNTAX Unsigned32 (484..65507) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is the maximum length in octets of a SNMPv2 message that this party will accept. For local (Agent) Parties (SnmpV2PartyEntryProv local = true) this cannot be set to greater than the fixed Agent maximum of 1400. For non-local (Manager) Parties (SnmpV2PartyEntryProv local = false) the maximum is 65507." DEFVAL { 1400 } ::= { vrSnmpPartyProvEntry 4 } vrSnmpPartyLocal OBJECT-TYPE SYNTAX TruthValue ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates whether this party executes at this SNMPv2 entity. If this attribute has a value of true, then the SNMPv2 entity is an Agent, and will listen for SNMPv2 messages on the ipAddress associated with this party. If this attribute has the value false, then the SNMPv2 entity is a Manager." ::= { vrSnmpPartyProvEntry 5 } vrSnmpPartyAuthProtocol OBJECT-TYPE SYNTAX INTEGER { noAuth(1), v2Md5AuthProtocol(4) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates the authentication protocol by which all messages generated by the party are authenticated as to origin and integrity. The value noAuth signifies that messages generated by the party are not authenticated." DEFVAL { noAuth } ::= { vrSnmpPartyProvEntry 6 } vrSnmpPartyAuthPrivate OBJECT-TYPE SYNTAX HexString (SIZE (0..16)) ACCESS write-only STATUS obsolete DESCRIPTION "This attribute is the Party's private authentication key. As with passwords this attribute cannot be displayed by the display command and is stored in encoded form. For Parties with an authentication protocol, this key must be provisioned." DEFVAL { ''H } -- "" ::= { vrSnmpPartyProvEntry 7 } vrSnmpPartyAuthPublic OBJECT-TYPE SYNTAX HexString (SIZE (0..16)) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is the Party's public authentication key. It is the 'public information' used by the Party's authentication protocol." DEFVAL { ''H } -- "" ::= { vrSnmpPartyProvEntry 8 } vrSnmpPartyAuthLifetime OBJECT-TYPE SYNTAX Unsigned32 (0..2147483647) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute represents the maximum acceptable delivery delay (lifetime) in seconds for messages from this Party." DEFVAL { 300 } ::= { vrSnmpPartyProvEntry 9 } vrSnmpPartyPrivProtocol OBJECT-TYPE SYNTAX INTEGER { noPriv(2) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute identifies the privacy protocol by which all protocol messages received by the party are protected from disclosure. The value noPriv signifies that messages received by the party are not protected. As DES is not supported, this is a constant noPriv." DEFVAL { noPriv } ::= { vrSnmpPartyProvEntry 10 } vrSnmpPartyRowStorageType OBJECT-TYPE SYNTAX INTEGER { nonVolatile(3) } ACCESS read-write STATUS obsolete DESCRIPTION "The attribute indicates the storage type for this conceptual row in the SNMPv2 aclTable. This is a constant - nonVolatile." DEFVAL { nonVolatile } ::= { vrSnmpPartyProvEntry 11 } vrSnmpPartyStdRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates the status of this conceptual row in the SNMPv2 partyTable. This is a constant - active." DEFVAL { active } ::= { vrSnmpPartyProvEntry 12 } vrSnmpPartyOpTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpPartyOpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This group contains Operational Attributes relating SNMPv2 parties. based upon rfc1321, rfc1445, rfc1446, rfc1447, and rfc1450." ::= { vrSnmpParty 11 } vrSnmpPartyOpEntry OBJECT-TYPE SYNTAX VrSnmpPartyOpEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vrSnmpPartyOpTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpPartyIdentityIndex } ::= { vrSnmpPartyOpTable 1 } VrSnmpPartyOpEntry ::= SEQUENCE { vrSnmpPartyTrapNumbers Unsigned32, vrSnmpPartyAuthClock Unsigned32 } vrSnmpPartyTrapNumbers OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute is a count of the total number of SNMPv2 traps sent to a SNMPv2 non-Local (Manager) party (SnmpV2PartyEntryProv local = false). This counter is never incremented for Local (Agent) parties (SnmpV2PartyEntryProv local = true)." DEFVAL { 0 } ::= { vrSnmpPartyOpEntry 1 } vrSnmpPartyAuthClock OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is the authentication clock which represents the notion of current time specific to a Party. This value is not permitted to 'roll-over'. In other words once it reaches the maximum it stays there, unless explicitly decremented." DEFVAL { 0 } ::= { vrSnmpPartyOpEntry 2 } -- VirtualRouter/string Snmp Context/Int_Sequence -- This component is used to add SNMPv2 Context Table Entries. The -- maximum number of Table Entries is 1024. The component -- attributes are derived from rfc1445, and rfc1447. vrSnmpCon OBJECT IDENTIFIER ::= { vrSnmp 6 } vrSnmpConRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpConRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This entry controls the addition and deletion of vrSnmpCon components." ::= { vrSnmpCon 1 } vrSnmpConRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpConRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A single entry in the table represents a single vrSnmpCon component." INDEX { vrIndex, vrSnmpIndex, vrSnmpConIdentityIndex } ::= { vrSnmpConRowStatusTable 1 } VrSnmpConRowStatusEntry ::= SEQUENCE { vrSnmpConRowStatus RowStatus, vrSnmpConComponentName DisplayString, vrSnmpConStorageType StorageType, vrSnmpConIdentityIndex OBJECT IDENTIFIER } vrSnmpConRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS obsolete DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpCon components. These components can be added and deleted." ::= { vrSnmpConRowStatusEntry 1 } vrSnmpConComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpConRowStatusEntry 2 } vrSnmpConStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS obsolete DESCRIPTION "This variable represents the storage type value for the vrSnmpCon tables." ::= { vrSnmpConRowStatusEntry 4 } vrSnmpConIdentityIndex OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents the index for the vrSnmpCon tables." ::= { vrSnmpConRowStatusEntry 10 } vrSnmpConProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpConProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This group contains provisionable attributes relating to SNMPv2 Contexts Table Entries. The attributes are derived from rfc1445, and rfc1447." ::= { vrSnmpCon 10 } vrSnmpConProvEntry OBJECT-TYPE SYNTAX VrSnmpConProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vrSnmpConProvTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpConIdentityIndex } ::= { vrSnmpConProvTable 1 } VrSnmpConProvEntry ::= SEQUENCE { vrSnmpConStdIndex Unsigned32, vrSnmpConLocal INTEGER, vrSnmpConViewIndex Unsigned32, vrSnmpConLocalTime INTEGER, vrSnmpConRowStorageType INTEGER, vrSnmpConStdRowStatus INTEGER } vrSnmpConStdIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1024) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the SNMPv2 Contexts table contextIndex. This index is unique and its value is automatically selected for you." ::= { vrSnmpConProvEntry 1 } vrSnmpConLocal OBJECT-TYPE SYNTAX INTEGER { true(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates whether this context is realized by this SNMPv2 entity. This is a constant - true." DEFVAL { true } ::= { vrSnmpConProvEntry 2 } vrSnmpConViewIndex OBJECT-TYPE SYNTAX Unsigned32 (1..1024) ACCESS read-write STATUS obsolete DESCRIPTION "The SNMPv2 Contexts view index selects a particular MIB view entry in the SNMPv2 viewTable. This index must correspond to the first replication index (index) of one of the entries in the SnmpView. The value of the localTime attribute provides further information on the temporal domain of the MIB view." ::= { vrSnmpConProvEntry 3 } vrSnmpConLocalTime OBJECT-TYPE SYNTAX INTEGER { currentTime(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute identifies the temporal context of the management information in the MIB view identified by the viewIndex attribute. This is a constant - currentTime. The SNMPv2 alternatives restartTime and cacheTime are not currently supported." DEFVAL { currentTime } ::= { vrSnmpConProvEntry 4 } vrSnmpConRowStorageType OBJECT-TYPE SYNTAX INTEGER { nonVolatile(3) } ACCESS read-write STATUS obsolete DESCRIPTION "The attribute indicates the storage type for this conceptual row in the SNMPv2 contextTable. This is a constant - nonVolatile." DEFVAL { nonVolatile } ::= { vrSnmpConProvEntry 5 } vrSnmpConStdRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1) } ACCESS read-write STATUS obsolete DESCRIPTION "This attribute indicates the status of this conceptual row in the SNMPv2 aclTable. This is a constant - active." DEFVAL { active } ::= { vrSnmpConProvEntry 6 } -- VirtualRouter/string Snmp View/n,Int_Sequence -- This component is used to add SNMPv2 View Table Entries. These -- Views can also used by SNMPv1 Communities. The index index -- represents the SNMPv2 Table Entry viewIndex and the subTree -- index identifies a MIB subTree.The component attributes are -- derived from rfc1445, and rfc1447. vrSnmpView OBJECT IDENTIFIER ::= { vrSnmp 7 } vrSnmpViewRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpViewRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmpView components." ::= { vrSnmpView 1 } vrSnmpViewRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpViewRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmpView component." INDEX { vrIndex, vrSnmpIndex, vrSnmpViewIndex, vrSnmpViewSubtreeIndex } ::= { vrSnmpViewRowStatusTable 1 } VrSnmpViewRowStatusEntry ::= SEQUENCE { vrSnmpViewRowStatus RowStatus, vrSnmpViewComponentName DisplayString, vrSnmpViewStorageType StorageType, vrSnmpViewIndex Integer32, vrSnmpViewSubtreeIndex OBJECT IDENTIFIER } vrSnmpViewRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpView components. These components can be added and deleted." ::= { vrSnmpViewRowStatusEntry 1 } vrSnmpViewComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpViewRowStatusEntry 2 } vrSnmpViewStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmpView tables." ::= { vrSnmpViewRowStatusEntry 4 } vrSnmpViewIndex OBJECT-TYPE SYNTAX Integer32 (1..1024) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrSnmpView tables." ::= { vrSnmpViewRowStatusEntry 10 } vrSnmpViewSubtreeIndex OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents an index for the vrSnmpView tables." ::= { vrSnmpViewRowStatusEntry 11 } vrSnmpViewProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpViewProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains provisionable attributes relating to SNMPv2 View Table SubTrees. The attributes are derived from rfc1445, and rfc1447." ::= { vrSnmpView 10 } vrSnmpViewProvEntry OBJECT-TYPE SYNTAX VrSnmpViewProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpViewProvTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpViewIndex, vrSnmpViewSubtreeIndex } ::= { vrSnmpViewProvTable 1 } VrSnmpViewProvEntry ::= SEQUENCE { vrSnmpViewMask HexString, vrSnmpViewType INTEGER, vrSnmpViewRowStorageType INTEGER, vrSnmpViewStdRowStatus INTEGER } vrSnmpViewMask OBJECT-TYPE SYNTAX HexString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute is the View mask which, in combination with the corresponding instance of SnmpView subTree, defines a family of view subtrees. Each bit of this bit mask corresponds to a subindentifier of SnmpView subTree, with the most significant bit of the i-th octet of this octet string value (extended if necessary, see below) corresponding to the (8*i - 7)-th sub-identifier, and the least significant bit of the i-th octet of this octet string corresponding to the (8*i)-th sub-identifier, where i is in the range 1 through 16. Each bit of this bit mask specifies whether or not the corresponding sub-identifiers must match when determining if an OBJECT IDENTIFIER is in this family of view subtrees; a '1' indicates that an exact match must occur; a '0' indicates 'wild card', meaning that any sub-identifier value matches. Thus, the OBJECT IDENTIFIER X of an object instance is contained in a family of view subtrees if the following criteria are met: For each sub-identifier of the value of SnmpView subTree, either the i-th bit of mask is 0, or the i-th sub-identifier of X is equal to the i-th sub-identifier of the value of SnmpView subTree. If the value of this bit mask is M bits long and there are more than M sub-identifiers in the corresponding instance of SnmpView subTree, then the bit mask is extended with 1's to be the required length. Note that when the value of this object is the zero-length string, this extension rule results in a mask of all 1's being used (no wild card) and the family of SnmpView subTrees is the one snmpView subTree uniquely identified by the corresponding instance of subTree." DEFVAL { ''H } -- "" ::= { vrSnmpViewProvEntry 1 } vrSnmpViewType OBJECT-TYPE SYNTAX INTEGER { includedSubtree(1), excludedSubtree(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates whether the particular family of view subtrees is included or excluded in the SNMPv2 context's (or SNMPv1 community's) MIB view. The value 'includedSubtree' indicates that the corresponding instances of subTree and mask define a family of view subtrees included in the MIB view. The value 'excludedSubtree' indicates that the corresponding instances of subTree and mask define a family of view subtrees excluded in the MIB view." DEFVAL { includedSubtree } ::= { vrSnmpViewProvEntry 2 } vrSnmpViewRowStorageType OBJECT-TYPE SYNTAX INTEGER { nonVolatile(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The attribute indicates the storage type for this conceptual row in the SNMPv2 viewTable. This is a constant - nonVolatile." DEFVAL { nonVolatile } ::= { vrSnmpViewProvEntry 3 } vrSnmpViewStdRowStatus OBJECT-TYPE SYNTAX INTEGER { active(1) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute indicates the status of this conceptual row in the SNMPv2 snmpViewTable. This is a constant - active." DEFVAL { active } ::= { vrSnmpViewProvEntry 4 } -- Vr/Vr_String Snmp ObjectResource/n -- This component represents an entry in the SNMPv2 Object -- Resources Table (rfc1450). It lists the MIBs currently supported by -- the SNMP management entity. vrSnmpOr OBJECT IDENTIFIER ::= { vrSnmp 8 } vrSnmpOrRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpOrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmpOr components." ::= { vrSnmpOr 1 } vrSnmpOrRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpOrRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmpOr component." INDEX { vrIndex, vrSnmpIndex, vrSnmpOrIndex } ::= { vrSnmpOrRowStatusTable 1 } VrSnmpOrRowStatusEntry ::= SEQUENCE { vrSnmpOrRowStatus RowStatus, vrSnmpOrComponentName DisplayString, vrSnmpOrStorageType StorageType, vrSnmpOrIndex Integer32 } vrSnmpOrRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpOr components. These components cannot be added nor deleted." ::= { vrSnmpOrRowStatusEntry 1 } vrSnmpOrComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpOrRowStatusEntry 2 } vrSnmpOrStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmpOr tables." ::= { vrSnmpOrRowStatusEntry 4 } vrSnmpOrIndex OBJECT-TYPE SYNTAX Integer32 (1..1024) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrSnmpOr tables." ::= { vrSnmpOrRowStatusEntry 10 } vrSnmpOrOrTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpOrOrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The attributes of this group describe a MIB currently supported by the SNMP agent. SNMP managers make use of these entries to determine what is supported. The group is derived from rfc 1450." ::= { vrSnmpOr 10 } vrSnmpOrOrEntry OBJECT-TYPE SYNTAX VrSnmpOrOrEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpOrOrTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpOrIndex } ::= { vrSnmpOrOrTable 1 } VrSnmpOrOrEntry ::= SEQUENCE { vrSnmpOrId OBJECT IDENTIFIER, vrSnmpOrDescr AsciiString } vrSnmpOrId OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the authoritative identification of a dynamically-configurable management entity object resource. This is a MIB Object Identifier." ::= { vrSnmpOrOrEntry 2 } vrSnmpOrDescr OBJECT-TYPE SYNTAX AsciiString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the textual description of a dynamically- configurable management entity object resource. This is an ASCII description of a supported MIB." ::= { vrSnmpOrOrEntry 3 } -- This component contains statistics based upon the SnmpV2 -- Management Information Base SnmpV2 Statistics group (rfc1450). vrSnmpV2Stats OBJECT IDENTIFIER ::= { vrSnmp 9 } vrSnmpV2StatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpV2StatsRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This entry controls the addition and deletion of vrSnmpV2Stats components." ::= { vrSnmpV2Stats 1 } vrSnmpV2StatsRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpV2StatsRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A single entry in the table represents a single vrSnmpV2Stats component." INDEX { vrIndex, vrSnmpIndex, vrSnmpV2StatsIndex } ::= { vrSnmpV2StatsRowStatusTable 1 } VrSnmpV2StatsRowStatusEntry ::= SEQUENCE { vrSnmpV2StatsRowStatus RowStatus, vrSnmpV2StatsComponentName DisplayString, vrSnmpV2StatsStorageType StorageType, vrSnmpV2StatsIndex NonReplicated } vrSnmpV2StatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS obsolete DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpV2Stats components. These components cannot be added nor deleted." ::= { vrSnmpV2StatsRowStatusEntry 1 } vrSnmpV2StatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpV2StatsRowStatusEntry 2 } vrSnmpV2StatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS obsolete DESCRIPTION "This variable represents the storage type value for the vrSnmpV2Stats tables." ::= { vrSnmpV2StatsRowStatusEntry 4 } vrSnmpV2StatsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents the index for the vrSnmpV2Stats tables." ::= { vrSnmpV2StatsRowStatusEntry 10 } vrSnmpV2StatsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpV2StatsStatsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This attribute group contains the collection of statistics as defined by SNMPv2 providing basic instrumentation of a SNMPv2 Agent. The group is derived from rfc 1450. As the implementation is fully bilingual in regards to Snmp V2/V1, statistics which apply only to unilingual V2 Agents do not appear as attributes. Similarly as privacy protocols are not supported, the relevant statistics have no corresponding attributes." ::= { vrSnmpV2Stats 10 } vrSnmpV2StatsStatsEntry OBJECT-TYPE SYNTAX VrSnmpV2StatsStatsEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vrSnmpV2StatsStatsTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpV2StatsIndex } ::= { vrSnmpV2StatsStatsTable 1 } VrSnmpV2StatsStatsEntry ::= SEQUENCE { vrSnmpV2StatsPackets Unsigned32, vrSnmpV2StatsEncodingErrors Unsigned32, vrSnmpV2StatsUnknownSrcParties Unsigned32, vrSnmpV2StatsBadAuths Unsigned32, vrSnmpV2StatsNotInLifetime Unsigned32, vrSnmpV2StatsWrongDigestValues Unsigned32, vrSnmpV2StatsUnknownContexts Unsigned32, vrSnmpV2StatsBadOperations Unsigned32, vrSnmpV2StatsSilentDrops Unsigned32 } vrSnmpV2StatsPackets OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMP messages received by the SNMP management entity from the transport service. This has the same value as inPackets in the SnmpMibIIStatsOp group." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 1 } vrSnmpV2StatsEncodingErrors OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMP messages received by the SNMP management entity which were improperly BER encoded or had an invalid ASN.1 syntax. This has the same value as inAsnParseErrs in the SnmpMibIIStatsOp group." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 2 } vrSnmpV2StatsUnknownSrcParties OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message source Party was not locally recognized." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 3 } vrSnmpV2StatsBadAuths OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message authentication protocol did not match that of the local source Party." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 4 } vrSnmpV2StatsNotInLifetime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message source TimeStamp was less than the combination of the local source Party's clock and lifetime." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 5 } vrSnmpV2StatsWrongDigestValues OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message authentication Digest Value was invalid." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 6 } vrSnmpV2StatsUnknownContexts OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the message Context was not locally known." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 7 } vrSnmpV2StatsBadOperations OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMPv2 messages received by the SNMP management entity for which the PDU type was not allowed in the local Access Privileges Entry." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 8 } vrSnmpV2StatsSilentDrops OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS obsolete DESCRIPTION "This attribute represents the total number of SNMPv2 messages received by the SNMP management entity which were silently ignored because an alternate response message was greater than a local constraint or greater than the maximum message size allowed for the source Party. In other words, this attribute counts the number of error responses pdu's which could not be generated due to size constraints." DEFVAL { 0 } ::= { vrSnmpV2StatsStatsEntry 9 } -- This component contains statistics based upon the SnmpV2 -- Management Information Base SnmpV1 Statistics group (rfc1450). vrSnmpV1Stats OBJECT IDENTIFIER ::= { vrSnmp 10 } vrSnmpV1StatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpV1StatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmpV1Stats components." ::= { vrSnmpV1Stats 1 } vrSnmpV1StatsRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpV1StatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmpV1Stats component." INDEX { vrIndex, vrSnmpIndex, vrSnmpV1StatsIndex } ::= { vrSnmpV1StatsRowStatusTable 1 } VrSnmpV1StatsRowStatusEntry ::= SEQUENCE { vrSnmpV1StatsRowStatus RowStatus, vrSnmpV1StatsComponentName DisplayString, vrSnmpV1StatsStorageType StorageType, vrSnmpV1StatsIndex NonReplicated } vrSnmpV1StatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpV1Stats components. These components cannot be added nor deleted." ::= { vrSnmpV1StatsRowStatusEntry 1 } vrSnmpV1StatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpV1StatsRowStatusEntry 2 } vrSnmpV1StatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmpV1Stats tables." ::= { vrSnmpV1StatsRowStatusEntry 4 } vrSnmpV1StatsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrSnmpV1Stats tables." ::= { vrSnmpV1StatsRowStatusEntry 10 } vrSnmpV1StatsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpV1StatsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the collection of statistics as defined by SNMPv2 providing basic instrumentation of a SNMPv2 Agent which also implements SNMPv1. The group is derived from rfc 1450." ::= { vrSnmpV1Stats 10 } vrSnmpV1StatsStatsEntry OBJECT-TYPE SYNTAX VrSnmpV1StatsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpV1StatsStatsTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpV1StatsIndex } ::= { vrSnmpV1StatsStatsTable 1 } VrSnmpV1StatsStatsEntry ::= SEQUENCE { vrSnmpV1StatsBadCommunityNames Unsigned32, vrSnmpV1StatsBadCommunityUses Unsigned32 } vrSnmpV1StatsBadCommunityNames OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMPv1 messages received by the SNMP management entity which had an unknown SNMPv1 Community string. This has the same value as the attribute inBadCommunityNames under the SnmpMibIIStats component." DEFVAL { 0 } ::= { vrSnmpV1StatsStatsEntry 1 } vrSnmpV1StatsBadCommunityUses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMPv1 messages received by the SNMP management entity which attempted to perform an operation not allowed for the indicated SNMPv1 Community. This has the same value as the attribute inBadCommunityUses under the SnmpMibIIStats component." DEFVAL { 0 } ::= { vrSnmpV1StatsStatsEntry 2 } -- This component contains statistics based upon the MIB II Snmp -- group (rfc1213). vrSnmpMibIIStats OBJECT IDENTIFIER ::= { vrSnmp 11 } vrSnmpMibIIStatsRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpMibIIStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of vrSnmpMibIIStats components." ::= { vrSnmpMibIIStats 1 } vrSnmpMibIIStatsRowStatusEntry OBJECT-TYPE SYNTAX VrSnmpMibIIStatsRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single vrSnmpMibIIStats component." INDEX { vrIndex, vrSnmpIndex, vrSnmpMibIIStatsIndex } ::= { vrSnmpMibIIStatsRowStatusTable 1 } VrSnmpMibIIStatsRowStatusEntry ::= SEQUENCE { vrSnmpMibIIStatsRowStatus RowStatus, vrSnmpMibIIStatsComponentName DisplayString, vrSnmpMibIIStatsStorageType StorageType, vrSnmpMibIIStatsIndex NonReplicated } vrSnmpMibIIStatsRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-only STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of vrSnmpMibIIStats components. These components cannot be added nor deleted." ::= { vrSnmpMibIIStatsRowStatusEntry 1 } vrSnmpMibIIStatsComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrSnmpMibIIStatsRowStatusEntry 2 } vrSnmpMibIIStatsStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the vrSnmpMibIIStats tables." ::= { vrSnmpMibIIStatsRowStatusEntry 4 } vrSnmpMibIIStatsIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the vrSnmpMibIIStats tables." ::= { vrSnmpMibIIStatsRowStatusEntry 10 } vrSnmpMibIIStatsStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VrSnmpMibIIStatsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This attribute group contains the collection of statistics as defined by MIB II providing basic instrumentation of a SNMP Agent. The group is derived from rfc 1213. Statistics which are only relevant for SNMP Managers do not appear." ::= { vrSnmpMibIIStats 10 } vrSnmpMibIIStatsStatsEntry OBJECT-TYPE SYNTAX VrSnmpMibIIStatsStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the vrSnmpMibIIStatsStatsTable." INDEX { vrIndex, vrSnmpIndex, vrSnmpMibIIStatsIndex } ::= { vrSnmpMibIIStatsStatsTable 1 } VrSnmpMibIIStatsStatsEntry ::= SEQUENCE { vrSnmpMibIIStatsInPackets Unsigned32, vrSnmpMibIIStatsInBadCommunityNames Unsigned32, vrSnmpMibIIStatsInBadCommunityUses Unsigned32, vrSnmpMibIIStatsInAsnParseErrs Unsigned32, vrSnmpMibIIStatsOutPackets Unsigned32, vrSnmpMibIIStatsInBadVersions Unsigned32, vrSnmpMibIIStatsInTotalReqVars Unsigned32, vrSnmpMibIIStatsInTotalSetVars Unsigned32, vrSnmpMibIIStatsInGetRequests Unsigned32, vrSnmpMibIIStatsInGetNexts Unsigned32, vrSnmpMibIIStatsInSetRequests Unsigned32, vrSnmpMibIIStatsOutTooBigs Unsigned32, vrSnmpMibIIStatsOutNoSuchNames Unsigned32, vrSnmpMibIIStatsOutBadValues Unsigned32, vrSnmpMibIIStatsOutGenErrs Unsigned32, vrSnmpMibIIStatsOutGetResponses Unsigned32, vrSnmpMibIIStatsOutTraps Unsigned32 } vrSnmpMibIIStatsInPackets OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute represents the total number of SNMP messages received by the SNMP management entity." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 1 } vrSnmpMibIIStatsInBadCommunityNames OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMPv1 messages received by the SNMP management entity which had an unknown SNMPv1 Community string. This has the same value as the attribute badCommunityNames under the SnmpV1Stats component." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 2 } vrSnmpMibIIStatsInBadCommunityUses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMPv1 messages received by the SNMP management entity which attempted to perform an operation not allowed for the indicated SNMPv1 Community. This has the same value as the attribute badCommunityUses under the SnmpV1Stats component." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 3 } vrSnmpMibIIStatsInAsnParseErrs OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMP messages received by the SNMP management entity which were improperly BER encoded or had an invalid ASN.1 syntax." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 4 } vrSnmpMibIIStatsOutPackets OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMP messages transmitted by the SNMP management entity." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 5 } vrSnmpMibIIStatsInBadVersions OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMPv1 messages received by the SNMP management entity with an invalid SNMP version number." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 6 } vrSnmpMibIIStatsInTotalReqVars OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the MIB objects successfully retrieved by Get, and Get-Next requests." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 7 } vrSnmpMibIIStatsInTotalSetVars OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the MIB objects successfully Set by SNMP requests." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 8 } vrSnmpMibIIStatsInGetRequests OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Get requests accepted and processed by the SNMP management entity." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 9 } vrSnmpMibIIStatsInGetNexts OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Get-Next requests accepted and processed by the SNMP management entity." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 10 } vrSnmpMibIIStatsInSetRequests OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Set requests accepted and processed by the SNMP management entity." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 11 } vrSnmpMibIIStatsOutTooBigs OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the responses generated by the SNMP management entity with an error-status field of tooBig." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 12 } vrSnmpMibIIStatsOutNoSuchNames OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMPv1 responses generated by the SNMP management entity with an error status field of noSuchName." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 13 } vrSnmpMibIIStatsOutBadValues OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMPv1 responses generated by the SNMP management entity with an error status field of badValue." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 14 } vrSnmpMibIIStatsOutGenErrs OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the SNMP responses generated by the SNMP management entity with an error-status field of genErr." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 15 } vrSnmpMibIIStatsOutGetResponses OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Get responses generated by the SNMP management entity." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 16 } vrSnmpMibIIStatsOutTraps OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the Traps generated by the SNMP management entity." DEFVAL { 0 } ::= { vrSnmpMibIIStatsStatsEntry 17 } -- VirtualRouter/string SnmpInitialConfiguration -- This component contains the information required for the definition -- of SNMPv2 initial parties, contexts, views, and access control -- policies. The definition of initial parties is described in rfc1447. -- If this component is present and its attributes are properly set when -- the Snmp component is added, then the initial instances of Acl, -- Party, Context, and View components will be added automatically. -- If this component is not present or its attributes are not set, then -- when the Snmp component is added, no initial instances of the -- aforementioned components will be added. vrInitSnmpConfig OBJECT IDENTIFIER ::= { vr 9 } vrInitSnmpConfigRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF VrInitSnmpConfigRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This entry controls the addition and deletion of vrInitSnmpConfig components." ::= { vrInitSnmpConfig 1 } vrInitSnmpConfigRowStatusEntry OBJECT-TYPE SYNTAX VrInitSnmpConfigRowStatusEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "A single entry in the table represents a single vrInitSnmpConfig component." INDEX { vrIndex, vrInitSnmpConfigIndex } ::= { vrInitSnmpConfigRowStatusTable 1 } VrInitSnmpConfigRowStatusEntry ::= SEQUENCE { vrInitSnmpConfigRowStatus RowStatus, vrInitSnmpConfigComponentName DisplayString, vrInitSnmpConfigStorageType StorageType, vrInitSnmpConfigIndex NonReplicated } vrInitSnmpConfigRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS obsolete DESCRIPTION "This variable is used as the basis for SNMP naming of vrInitSnmpConfig components. These components can be added and deleted." ::= { vrInitSnmpConfigRowStatusEntry 1 } vrInitSnmpConfigComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS obsolete DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { vrInitSnmpConfigRowStatusEntry 2 } vrInitSnmpConfigStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS obsolete DESCRIPTION "This variable represents the storage type value for the vrInitSnmpConfig tables." ::= { vrInitSnmpConfigRowStatusEntry 4 } vrInitSnmpConfigIndex OBJECT-TYPE SYNTAX NonReplicated ACCESS not-accessible STATUS obsolete DESCRIPTION "This variable represents the index for the vrInitSnmpConfig tables." ::= { vrInitSnmpConfigRowStatusEntry 10 } vrInitSnmpConfigProvTable OBJECT-TYPE SYNTAX SEQUENCE OF VrInitSnmpConfigProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "This group contains provisionable attributes required for the definition of initial SNMPv2 parties, contexts, views, and access control policies, as defined in rfc1447." ::= { vrInitSnmpConfig 10 } vrInitSnmpConfigProvEntry OBJECT-TYPE SYNTAX VrInitSnmpConfigProvEntry ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry in the vrInitSnmpConfigProvTable." INDEX { vrIndex, vrInitSnmpConfigIndex } ::= { vrInitSnmpConfigProvTable 1 } VrInitSnmpConfigProvEntry ::= SEQUENCE { vrInitSnmpConfigAgentAddress AsciiString, vrInitSnmpConfigManagerAddress AsciiString } vrInitSnmpConfigAgentAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..80)) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is the address of the Virtual Router where the initial Agent parties will receive network management traffic. It is used to initialize the transport address of the initial local parties and also is used to define initial party and context identifiers. The format of the agentAddress is an IpAddress." ::= { vrInitSnmpConfigProvEntry 1 } vrInitSnmpConfigManagerAddress OBJECT-TYPE SYNTAX AsciiString (SIZE (1..80)) ACCESS read-write STATUS obsolete DESCRIPTION "This attribute is the address of the SNMPv2 manager. It is used to initialize the transport address of the initial non-local parties. The format of the managerAddress is an IpAddress." ::= { vrInitSnmpConfigProvEntry 2 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { vrSnmpMibIIStatsComponentName, -- vrSnmpOrId, -- vrSnmpMibIIStatsOutGetResponses, -- vrSnmpOrStorageType, -- vrSnmpV1EnableAuthenTraps, -- vrSnmpV1StatsBadCommunityUses, -- vrSnmpMibIIStatsInTotalSetVars, -- vrSnmpSysStorageType, -- vrSnmpComRowStatus, -- vrSnmpSysName, -- vrSnmpControlStatus, -- vrSnmpAdminState, -- vrSnmpV1StatsBadCommunityNames, -- vrSnmpMibIIStatsInBadVersions, -- vrSnmpSysServices, -- vrSnmpMibIIStatsOutGenErrs, -- vrSnmpMibIIStatsOutBadValues, -- vrSnmpViewStorageType, -- vrSnmpRowStatus, -- vrSnmpViewRowStatus, -- vrSnmpSysContact, -- vrSnmpProceduralStatus, -- vrSnmpComManStorageType, -- vrSnmpMibIIStatsInGetNexts, -- vrSnmpMgrOfLastAuthFailure, -- vrSnmpMibIIStatsInBadCommunityUses, -- vrSnmpComComponentName, -- vrSnmpOrRowStatus, -- vrSnmpUsageState, -- vrSnmpSysRowStatus, -- vrSnmpOrDescr, -- vrSnmpViewRowStorageType, -- vrSnmpMibIIStatsOutTraps, -- vrSnmpComponentName, -- vrSnmpMibIIStatsOutNoSuchNames, -- vrSnmpV1StatsStorageType, -- vrSnmpTrapsProcessed, -- vrSnmpComManRowStatus, -- vrSnmpSysObjectId, -- vrSnmpSysLocation, -- vrSnmpMibIIStatsInBadCommunityNames, -- vrSnmpOrComponentName, -- vrSnmpOperationalState, -- vrSnmpLastAuthFailure, -- vrSnmpSysComponentName, -- vrSnmpMibIIStatsInTotalReqVars, -- vrSnmpViewStdRowStatus, -- vrSnmpViewMask, -- vrSnmpLastOrChange, -- vrSnmpViewType, -- vrSnmpAlarmsAsTraps, -- vrSnmpComManComponentName, -- vrSnmpComStorageType, -- vrSnmpMibIIStatsOutTooBigs, -- vrSnmpMibIIStatsInSetRequests, -- vrSnmpV1StatsRowStatus, -- vrSnmpViewComponentName, -- vrSnmpAvailabilityStatus, -- vrSnmpMibIIStatsInAsnParseErrs, -- vrSnmpComManTransportAddress, -- vrSnmpMibIIStatsOutPackets, -- vrSnmpCidInEntTraps, -- vrSnmpComViewIndex, -- vrSnmpIpStack, -- vrSnmpMibIIStatsRowStatus, -- vrSnmpMibIIStatsInGetRequests, -- vrSnmpAlarmStatus, -- vrSnmpComAccessMode, -- vrSnmpMibIIStatsInPackets, -- vrSnmpV1StatsComponentName, -- vrSnmpUnknownStatus, -- vrSnmpStandbyStatus, -- vrSnmpV2EnableAuthenTraps, -- vrSnmpSysDescription, -- vrSnmpTrapsDiscarded, -- vrSnmpSysUpTime, -- vrSnmpStorageType, -- vrSnmpComManPrivileges, -- vrSnmpComTDomain, -- vrSnmpMibIIStatsStorageType, -- vrSnmpComCommunityString } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." baseSnmpGroup OBJECT IDENTIFIER ::= { baseSnmpMIB 1 } baseSnmpGroupBD OBJECT IDENTIFIER ::= { baseSnmpGroup 4 } baseSnmpGroupBD01 OBJECT IDENTIFIER ::= { baseSnmpGroupBD 2 } baseSnmpGroupBD01A OBJECT IDENTIFIER ::= { baseSnmpGroupBD01 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 BaseSnmp." -- STATUS mandatory -- DESCRIPTION "BaseSnmp MIB: MIB Version BD01A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-BaseSnmpMIB -- INCLUDES { baseSnmpGroupBD01A } -- rfc1213 (MIB II) -- -- SUPPORTS RFC1213-MIB -- INCLUDES { system, interfaces, snmp } -- -- variations for SNMP group of rfc1213 -- -- VARIATION snmpInTooBigs -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpInNoSuchNames -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpInBadValues -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpInReadOnlys -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpInGenErrs -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpInGetResponses -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpInTraps -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpOutGetRequests -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpOutGetNexts -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- VARIATION snmpOutSetRequests -- ACCESS not-implemented -- DESCRIPTION "Not applicable for Agent" -- -- -- rfc1450 -- -- SUPPORTS SNMPv2-MIB -- INCLUDES { snmpStats, snmpV1, snmpOR, snmpTrap, snmpSet } -- -- variations for snmpStats group -- -- VARIATION snmpStats30Something -- ACCESS not-implemented -- DESCRIPTION "Inapplicable for an agent supporting V1" -- -- VARIATION snmpStatsUnknownDstParties -- ACCESS not-implemented -- DESCRIPTION "Inapplicable since privacy not supported" -- -- VARIATION snmpStatsDstPartyMismatches -- ACCESS not-implemented -- DESCRIPTION "Inapplicable since privacy not supported" -- -- baseSnmpCapabilities OBJECT IDENTIFIER ::= { baseSnmpMIB 3 } baseSnmpCapabilitiesBD OBJECT IDENTIFIER ::= { baseSnmpCapabilities 4 } baseSnmpCapabilitiesBD01 OBJECT IDENTIFIER ::= { baseSnmpCapabilitiesBD 2 } baseSnmpCapabilitiesBD01A OBJECT IDENTIFIER ::= { baseSnmpCapabilitiesBD01 2 } END