Nortel-Magellan-Passport-AtmMpeMIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE FROM RFC-1212 components, passportMIBs FROM Nortel-Magellan-Passport-UsefulDefinitionsMIB Counter32, DisplayString, StorageType, RowStatus, InterfaceIndex, Integer32, Unsigned32 FROM Nortel-Magellan-Passport-StandardTextualConventionsMIB Link FROM Nortel-Magellan-Passport-TextualConventionsMIB; -- LAST-UPDATED "9702280000Z" -- ORGANIZATION "Nortel" -- CONTACT-INFO " -- Nortel Magellan Network Management -- -- Postal: P.O. Box 5080, Station F -- Ottawa, Ontario -- Canada K2C 3T1 -- -- Email: nm_plm@nt.com" -- DESCRIPTION -- "The module describing the Nortel Magellan Passport -- AtmMpe Enterprise MIB." atmMpeMIB OBJECT IDENTIFIER ::= { passportMIBs 65 } -- AtmMpe/n -- This component represents a logical interface between the Virtual -- Router and an ATM media (AtmIf). Multiprotocol Encapsulation as -- specified in RFC1483 is used to transfer higher-layer protocol data -- across virtual channels in an ATM network. AtmMpes provide a -- means to associate multiple ATM virtual channel connections with a -- single VirtualRouter ProtocolPort. The AtmMpe component is -- associated with a ProtocolPort via a linkage attribute and virtual -- channel connections via a linkage attribute in each AtmConnection -- subcomponent. atmMpe OBJECT IDENTIFIER ::= { components 118 } atmMpeRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of atmMpe components." ::= { atmMpe 1 } atmMpeRowStatusEntry OBJECT-TYPE SYNTAX AtmMpeRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single atmMpe component." INDEX { atmMpeIndex } ::= { atmMpeRowStatusTable 1 } AtmMpeRowStatusEntry ::= SEQUENCE { atmMpeRowStatus RowStatus, atmMpeComponentName DisplayString, atmMpeStorageType StorageType, atmMpeIndex Integer32 } atmMpeRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of atmMpe components. These components can be added and deleted." ::= { atmMpeRowStatusEntry 1 } atmMpeComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { atmMpeRowStatusEntry 2 } atmMpeStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the atmMpe tables." ::= { atmMpeRowStatusEntry 4 } atmMpeIndex OBJECT-TYPE SYNTAX Integer32 (0..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the atmMpe tables." ::= { atmMpeRowStatusEntry 10 } atmMpeCidDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the attribute for a component's Customer Identifier (CID). Refer to the attribute description for a detailed explanation of CIDs." ::= { atmMpe 10 } atmMpeCidDataEntry OBJECT-TYPE SYNTAX AtmMpeCidDataEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeCidDataTable." INDEX { atmMpeIndex } ::= { atmMpeCidDataTable 1 } AtmMpeCidDataEntry ::= SEQUENCE { atmMpeCustomerIdentifier Unsigned32 } atmMpeCustomerIdentifier OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..8191) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute holds the Customer Identifier (CID). Every component has a CID. If a component has a cid attribute, the component's CID is the provisioned value of that attribute; otherwise the component inherits the CID of its parent. The top- level component has a CID of 0. Every operator session also has a CID, which is the CID provisioned for the operator's user ID. An operator will see only the stream data for components having a matching CID. Also, the operator will be allowed to issue commands for only those components which have a matching CID. An operator CID of 0 is used to identify the Network Manager (referred to as 'NetMan' in DPN). This CID matches the CID of any component. Values 1 to 8191 inclusive (equivalent to 'basic CIDs' in DPN) may be assigned to specific customers." DEFVAL { 0 } ::= { atmMpeCidDataEntry 1 } atmMpeIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisionable attributes for the ifEntry." ::= { atmMpe 11 } atmMpeIfEntryEntry OBJECT-TYPE SYNTAX AtmMpeIfEntryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeIfEntryTable." INDEX { atmMpeIndex } ::= { atmMpeIfEntryTable 1 } AtmMpeIfEntryEntry ::= SEQUENCE { atmMpeIfAdminStatus INTEGER, atmMpeIfIndex InterfaceIndex } atmMpeIfAdminStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The desired state of the interface. The up state indicates the interface is operational. The down state indicates the interface is not operational. The testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { atmMpeIfEntryEntry 1 } atmMpeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "This is the index for the IfEntry. Its value is automatically initialized during the provisioning process." ::= { atmMpeIfEntryEntry 2 } atmMpeProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the AtmMpe component." ::= { atmMpe 12 } atmMpeProvEntry OBJECT-TYPE SYNTAX AtmMpeProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeProvTable." INDEX { atmMpeIndex } ::= { atmMpeProvTable 1 } AtmMpeProvEntry ::= SEQUENCE { atmMpeMaxTransmissionUnit Unsigned32, atmMpeEncapType INTEGER, atmMpeIlsForwarder Link } atmMpeMaxTransmissionUnit OBJECT-TYPE SYNTAX Unsigned32 (256..9188) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute sets the size of the largest datagram which can be sent on the interface. This includes the size of the Logical Link Control header (if applicable) as well as the protocol data unit." DEFVAL { 9188 } ::= { atmMpeProvEntry 1 } atmMpeEncapType OBJECT-TYPE SYNTAX INTEGER { llcEncap(1), ipVcEncap(2), ipxVcEncap(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the rfc1483 encapsulation type to be used for the AtmConnections under this AtmMpe. Specifying llcEncap allows multiplexing of multiple protocols over the VCCs. The protocol of the carried PDU will be identified by an IEEE 802.2 Logical Link Control header. If Bridging or Inverse ARP is to be carried over a VCC, llcEncap must be used. Specifying ipVcEncap or ipxVcEncap indicates that all the VCCs (i.e. AtmConnections) under an AtmMpe component will use VC based multiplexing and will carry IP or IPX PDUs only. Thus an IpxPort cannot be provisioned under a protocol port linked to an AtmMpe component with encapsulation type of ipVcEncap. Similarly, an IpPort cannot be provisioned under a protocol port linked to an AtmMpe component with encapsulation type of ipxVcEncap." DEFVAL { llcEncap } ::= { atmMpeProvEntry 2 } atmMpeIlsForwarder OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the IlsForwarder component this AtmMpe component is using." ::= { atmMpeProvEntry 3 } atmMpeMediaProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the base provisioning data for the Atm Mpe component." ::= { atmMpe 13 } atmMpeMediaProvEntry OBJECT-TYPE SYNTAX AtmMpeMediaProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeMediaProvTable." INDEX { atmMpeIndex } ::= { atmMpeMediaProvTable 1 } AtmMpeMediaProvEntry ::= SEQUENCE { atmMpeLinkToProtocolPort Link } atmMpeLinkToProtocolPort OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute contains a protocol port component name. The attribute associates an AtmMpe application with a protocol port." ::= { atmMpeMediaProvEntry 1 } atmMpeStateTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { atmMpe 14 } atmMpeStateEntry OBJECT-TYPE SYNTAX AtmMpeStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeStateTable." INDEX { atmMpeIndex } ::= { atmMpeStateTable 1 } AtmMpeStateEntry ::= SEQUENCE { atmMpeAdminState INTEGER, atmMpeOperationalState INTEGER, atmMpeUsageState INTEGER } atmMpeAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { atmMpeStateEntry 1 } atmMpeOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { atmMpeStateEntry 2 } atmMpeUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { atmMpeStateEntry 3 } atmMpeOperStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group includes the Operational Status attribute. This attribute defines the current operational state of this component." ::= { atmMpe 15 } atmMpeOperStatusEntry OBJECT-TYPE SYNTAX AtmMpeOperStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeOperStatusTable." INDEX { atmMpeIndex } ::= { atmMpeOperStatusTable 1 } AtmMpeOperStatusEntry ::= SEQUENCE { atmMpeSnmpOperStatus INTEGER } atmMpeSnmpOperStatus OBJECT-TYPE SYNTAX INTEGER { up(1), down(2), testing(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the interface. The up state indicates the interface is operational and capable of forwarding packets. The down state indicates the interface is not operational, thus unable to forward packets. testing state indicates that no operational packets can be passed." DEFVAL { up } ::= { atmMpeOperStatusEntry 1 } -- AtmMpe/n Ac/n -- This component represents a virtual channel through which -- internetworking frames will be transported using rfc1483 -- encapsulation. The AtmConnection component contains OSI state -- information, frame based statistics, and the linkage to an ATM -- virtual channel connection. This component's instance value is used -- by higher-layer protocols when referring to a specific ATM -- connection. atmMpeAc OBJECT IDENTIFIER ::= { atmMpe 2 } atmMpeAcRowStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeAcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This entry controls the addition and deletion of atmMpeAc components." ::= { atmMpeAc 1 } atmMpeAcRowStatusEntry OBJECT-TYPE SYNTAX AtmMpeAcRowStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A single entry in the table represents a single atmMpeAc component." INDEX { atmMpeIndex, atmMpeAcIndex } ::= { atmMpeAcRowStatusTable 1 } AtmMpeAcRowStatusEntry ::= SEQUENCE { atmMpeAcRowStatus RowStatus, atmMpeAcComponentName DisplayString, atmMpeAcStorageType StorageType, atmMpeAcIndex Integer32 } atmMpeAcRowStatus OBJECT-TYPE SYNTAX RowStatus ACCESS read-write STATUS mandatory DESCRIPTION "This variable is used as the basis for SNMP naming of atmMpeAc components. These components can be added and deleted." ::= { atmMpeAcRowStatusEntry 1 } atmMpeAcComponentName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "This variable provides the component's string name for use with the ASCII Console Interface" ::= { atmMpeAcRowStatusEntry 2 } atmMpeAcStorageType OBJECT-TYPE SYNTAX StorageType ACCESS read-only STATUS mandatory DESCRIPTION "This variable represents the storage type value for the atmMpeAc tables." ::= { atmMpeAcRowStatusEntry 4 } atmMpeAcIndex OBJECT-TYPE SYNTAX Integer32 (1..255) ACCESS not-accessible STATUS mandatory DESCRIPTION "This variable represents the index for the atmMpeAc tables." ::= { atmMpeAcRowStatusEntry 10 } atmMpeAcProvTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeAcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the provisioned attributes for the AtmConnection component." ::= { atmMpeAc 10 } atmMpeAcProvEntry OBJECT-TYPE SYNTAX AtmMpeAcProvEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeAcProvTable." INDEX { atmMpeIndex, atmMpeAcIndex } ::= { atmMpeAcProvTable 1 } AtmMpeAcProvEntry ::= SEQUENCE { atmMpeAcAtmConnection Link, atmMpeAcIpCoS Unsigned32 } atmMpeAcAtmConnection OBJECT-TYPE SYNTAX Link ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Atm nailed up endpoint, AtmIf/n Vcc/ vpi.vci Nep, that this connection is associated with." ::= { atmMpeAcProvEntry 1 } atmMpeAcIpCoS OBJECT-TYPE SYNTAX Unsigned32 (0..3) ACCESS read-write STATUS mandatory DESCRIPTION "This attribute specifies the Class of Service (CoS) given to each packet received on an ATM connection. The initial CoS given to a packet may be overridden when the cosPolicyAssignment attribute is defined on either the IpPort component of the ProtocolPort linked to the ATM MPE or the Ip component of the protocol port's VirtualRouter. When a packet is to be transmitted on an ATM MPE protocol port where multiple connections are available for the packet's next hop, the packet is forwarded on the connection where the ipCos value matches the CoS of the packet. When the packets' CoS does not match the ipCos value of any of the available connections, the packet is forwarded using next lowest CoS; failing this, the packet is forwarded using the next highest CoS." DEFVAL { 0 } ::= { atmMpeAcProvEntry 2 } atmMpeAcStateTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeAcStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses this group. For component-specific information and the valid state combinations, refer to NTP 241-7001-150, Passport Operations and Maintenance Guide." ::= { atmMpeAc 11 } atmMpeAcStateEntry OBJECT-TYPE SYNTAX AtmMpeAcStateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeAcStateTable." INDEX { atmMpeIndex, atmMpeAcIndex } ::= { atmMpeAcStateTable 1 } AtmMpeAcStateEntry ::= SEQUENCE { atmMpeAcAdminState INTEGER, atmMpeAcOperationalState INTEGER, atmMpeAcUsageState INTEGER } atmMpeAcAdminState OBJECT-TYPE SYNTAX INTEGER { locked(0), unlocked(1), shuttingDown(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this component. When the value is locked, the value of usageState must be idle. The value shuttingDown indicates that the component is administratively permitted to provide service to its existing users only. A Lock command was issued against the component and it is in the process of shutting down. The value unlocked indicates that the component is administratively permitted to provide services for its users. To enter this state, issue an Unlock command to this component." DEFVAL { unlocked } ::= { atmMpeAcStateEntry 1 } atmMpeAcOperationalState OBJECT-TYPE SYNTAX INTEGER { disabled(0), enabled(1) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that the component is not available for operation. For example, something is wrong with the component itself, or with another component on which this one depends. If the value is disabled, the usageState must be idle." DEFVAL { disabled } ::= { atmMpeAcStateEntry 2 } atmMpeAcUsageState OBJECT-TYPE SYNTAX INTEGER { idle(0), active(1), busy(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value busy indicates that the component is in use and has no spare operating capacity for additional users at this time." DEFVAL { idle } ::= { atmMpeAcStateEntry 3 } atmMpeAcOperTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeAcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the operational attributes for the AtmConnection component." ::= { atmMpeAc 12 } atmMpeAcOperEntry OBJECT-TYPE SYNTAX AtmMpeAcOperEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeAcOperTable." INDEX { atmMpeIndex, atmMpeAcIndex } ::= { atmMpeAcOperTable 1 } AtmMpeAcOperEntry ::= SEQUENCE { atmMpeAcSpeed Counter32 } atmMpeAcSpeed OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute indicates the approximate bit rate for the connection. The bit rate is determined from the cell rate provisioned for the Vcc linked to this connection. The cell rate is multiplied by 53 bytes per cell and 8 bits per byte to obtain the bit rate. The ifSpeed of the entry in the ifTable corresponding to the AtmMpe component is the lowest speed of all the connections associated with the AtmMpe component." ::= { atmMpeAcOperEntry 1 } atmMpeAcStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF AtmMpeAcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This group contains the frame based statistics maintained for the AtmConnection component. For cell based statistics, see the Vcc component." ::= { atmMpeAc 13 } atmMpeAcStatsEntry OBJECT-TYPE SYNTAX AtmMpeAcStatsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the atmMpeAcStatsTable." INDEX { atmMpeIndex, atmMpeAcIndex } ::= { atmMpeAcStatsTable 1 } AtmMpeAcStatsEntry ::= SEQUENCE { atmMpeAcOutPackets Counter32, atmMpeAcOutOctets Counter32, atmMpeAcOutDiscards Counter32, atmMpeAcInPackets Counter32, atmMpeAcInOctets Counter32, atmMpeAcInUnknownProtos Counter32, atmMpeAcInErrors Counter32 } atmMpeAcOutPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets sent on this connection. This counter will wrap around to 0 when it exceeds its maximum count." ::= { atmMpeAcStatsEntry 1 } atmMpeAcOutOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of octets sent on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { atmMpeAcStatsEntry 2 } atmMpeAcOutDiscards OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets which were supposed to be sent on this connection but were discarded due to congestion or the connection being down. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { atmMpeAcStatsEntry 3 } atmMpeAcInPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets received on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { atmMpeAcStatsEntry 4 } atmMpeAcInOctets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The attribute counts the total number of octets received on this connection. This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { atmMpeAcStatsEntry 5 } atmMpeAcInUnknownProtos OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets received on this connection which were discarded because they contained an unknown or unsupported protocol (includes packets received for protocols not currently bound to the associated ProtocolPort component). This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { atmMpeAcStatsEntry 6 } atmMpeAcInErrors OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "This attribute counts the total number of packets received on the connection which contained errors preventing them from being delivered to a higher-layer protocol (includes short frames). This counter will wrap around to 0 when it exceeds its maximum count. DESCRIPTION" ::= { atmMpeAcStatsEntry 7 } -- -- Version and Compliance statements -- -- Object-Group Statement: -- A list of all current accessible leaf objects. -- OBJECTS { atmMpeAcOutPackets, -- atmMpeMaxTransmissionUnit, -- atmMpeAcSpeed, -- atmMpeOperationalState, -- atmMpeAcOutDiscards, -- atmMpeAcAdminState, -- atmMpeIfAdminStatus, -- atmMpeAcInErrors, -- atmMpeAcIpCoS, -- atmMpeAcAtmConnection, -- atmMpeAcRowStatus, -- atmMpeAdminState, -- atmMpeLinkToProtocolPort, -- atmMpeAcInOctets, -- atmMpeRowStatus, -- atmMpeComponentName, -- atmMpeAcInPackets, -- atmMpeCustomerIdentifier, -- atmMpeAcUsageState, -- atmMpeEncapType, -- atmMpeAcOutOctets, -- atmMpeSnmpOperStatus, -- atmMpeIfIndex, -- atmMpeUsageState, -- atmMpeAcStorageType, -- atmMpeIlsForwarder, -- atmMpeAcOperationalState, -- atmMpeAcComponentName, -- atmMpeAcInUnknownProtos, -- atmMpeStorageType } -- STATUS mandatory -- DESCRIPTION -- "A list of all current accessible leaf objects." atmMpeGroup OBJECT IDENTIFIER ::= { atmMpeMIB 1 } atmMpeGroupBD OBJECT IDENTIFIER ::= { atmMpeGroup 4 } atmMpeGroupBD00 OBJECT IDENTIFIER ::= { atmMpeGroupBD 1 } atmMpeGroupBD00A OBJECT IDENTIFIER ::= { atmMpeGroupBD00 2 } -- Agent-Capabilities Statement: -- PRODUCT-RELEASE "Passport Release 7.0 AtmMpe." -- STATUS mandatory -- DESCRIPTION "AtmMpe MIB: MIB Version BD00A, -- Software Version BG00S4C." -- SUPPORTS Nortel-Magellan-Passport-AtmMpeMIB -- INCLUDES { atmMpeGroupBD00A } atmMpeCapabilities OBJECT IDENTIFIER ::= { atmMpeMIB 3 } atmMpeCapabilitiesBD OBJECT IDENTIFIER ::= { atmMpeCapabilities 4 } atmMpeCapabilitiesBD00 OBJECT IDENTIFIER ::= { atmMpeCapabilitiesBD 1 } atmMpeCapabilitiesBD00A OBJECT IDENTIFIER ::= { atmMpeCapabilitiesBD00 2 } END