--
-- Juniper Enterprise Specific MIB: Structure of Management Information
-- 
-- Copyright (c) 2010-2011, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--


JUNIPER-LSYSSP-POLICYWCNT-MIB DEFINITIONS ::= BEGIN
   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
      Unsigned32
        FROM SNMPv2-SMI
      DisplayString
        FROM SNMPv2-TC
      jnxLsysSpPolicywcnt                  
        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
    ;
    
    jnxLsysSpPolicywcntMIB MODULE-IDENTITY
        LAST-UPDATED  "201005191644Z" -- May 19, 2010
        ORGANIZATION  "Juniper Networks, Inc."
        CONTACT-INFO
            "Juniper Technical Assistance Center
             Juniper Networks, Inc.
             1194 N. Mathilda Avenue
             Sunnyvale, CA 94089

             E-mail: support@juniper.net
             HTTP://www.juniper.net"
        DESCRIPTION
            "This module defines the policy-with-count-specific MIB for 
             Juniper Enterprise Logical-System (LSYS) security profiles.  
             Juniper documentation is recommended as the reference. 

             The LSYS security profile provides various static and dynamic 
             resource management by observing resource quota limits. 
             Security policy-with-count resource is the focus in this MIB. 
            "
        ::= { jnxLsysSpPolicywcnt 1 }

    jnxLsysSpPolicywcntObjects  OBJECT IDENTIFIER ::= { jnxLsysSpPolicywcntMIB 1 }
    jnxLsysSpPolicywcntSummary  OBJECT IDENTIFIER ::= { jnxLsysSpPolicywcntMIB 2 }
    
 
-- **********************************************************************
-- Tabular policy-with-count resource information objects per LSYS:
--   Below are policy-with-count resource table indexed by LSYS name.
-- **********************************************************************

-- The policy-with-count resource table per LSYS

    jnxLsysSpPolicywcntTable OBJECT-TYPE
        SYNTAX              SEQUENCE OF JnxLsysSpPolicywcntEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION 
            "LSYSPROFILE policy-with-count objects for policy-with-count 
             resource consumption per LSYS."  
    ::= { jnxLsysSpPolicywcntObjects 1 }
    
    jnxLsysSpPolicywcntEntry OBJECT-TYPE
        SYNTAX              JnxLsysSpPolicywcntEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION  
            "An entry in policy-with-count resource table."
    INDEX { IMPLIED jnxLsysSpPolicywcntLsysName }          
    ::= { jnxLsysSpPolicywcntTable 1 }          

    JnxLsysSpPolicywcntEntry ::= 
       SEQUENCE {
          jnxLsysSpPolicywcntLsysName    DisplayString,
          jnxLsysSpPolicywcntProfileName DisplayString,
          jnxLsysSpPolicywcntUsage       Unsigned32,
          jnxLsysSpPolicywcntReserved    Unsigned32,
          jnxLsysSpPolicywcntMaximum     Unsigned32
    }   
 
-- Entry definitions for the policy-with-count resource table
 
    jnxLsysSpPolicywcntLsysName       OBJECT-TYPE
        SYNTAX              DisplayString (SIZE(1..64))
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION
            "The name of the logical system for which policy-with-count 
             resource information is retrieved. "
        ::= { jnxLsysSpPolicywcntEntry 1 }

    jnxLsysSpPolicywcntProfileName    OBJECT-TYPE
        SYNTAX              DisplayString (SIZE(1..32))
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
            "The security profile name string for the LSYS."
    ::= { jnxLsysSpPolicywcntEntry 2 }

    jnxLsysSpPolicywcntUsage          OBJECT-TYPE
        SYNTAX              Unsigned32
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION  
            "The current resource usage count for the LSYS."
    ::= { jnxLsysSpPolicywcntEntry 3 }
    
    jnxLsysSpPolicywcntReserved       OBJECT-TYPE
        SYNTAX              Unsigned32
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
            "The reserved resource count for the LSYS."
    ::= { jnxLsysSpPolicywcntEntry 4 } 

    jnxLsysSpPolicywcntMaximum        OBJECT-TYPE
        SYNTAX              Unsigned32
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
            "The maximum allowed resource usage count for the LSYS."
    ::= { jnxLsysSpPolicywcntEntry 5 }


-- **********************************************************************
-- The policy-with-count resource information summary:
-- **********************************************************************

    jnxLsysSpPolicywcntUsedAmount         OBJECT-TYPE
        SYNTAX                  Unsigned32 
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
           "The policy-with-count resource consumption over all LSYS."
    ::= { jnxLsysSpPolicywcntSummary 1 }          

    jnxLsysSpPolicywcntMaxQuota           OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The policy-with-count resource maximum quota for the whole 
            device for all LSYS."
    ::= { jnxLsysSpPolicywcntSummary 2 }
    
    jnxLsysSpPolicywcntAvailableAmount    OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The policy-with-count resource available in the whole device."
    ::= { jnxLsysSpPolicywcntSummary 3 }
    
    jnxLsysSpPolicywcntHeaviestUsage      OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The most amount of policy-with-count resource consumed of a 
            LSYS."
    ::= { jnxLsysSpPolicywcntSummary 4 }
    
    jnxLsysSpPolicywcntHeaviestUser       OBJECT-TYPE
        SYNTAX                  DisplayString (SIZE(1..64))
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The LSYS name that consume the most policy-with-count resource."
    ::= { jnxLsysSpPolicywcntSummary 5 }
    
    jnxLsysSpPolicywcntLightestUsage      OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The least amount of policy-with-count resource consumed of a 
            LSYS."
    ::= { jnxLsysSpPolicywcntSummary 6 }
    
    jnxLsysSpPolicywcntLightestUser       OBJECT-TYPE
        SYNTAX                  DisplayString (SIZE(1..64))
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The LSYS name that consume the least policy-with-count resource."
    ::= { jnxLsysSpPolicywcntSummary 7 }
    


 -- ***************************************************************
 -- definition of policy-with-count resource related traps. (TBD)
 -- ***************************************************************

--
-- End of File 
--

END