-- -- Juniper Enterprise Specific MIB: Structure of Management Information -- -- Copyright (c) 2010-2011, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-LSYSSP-NATSTATICRULE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString FROM SNMPv2-TC jnxLsysSpNATstaticrule FROM JUNIPER-LSYS-SECURITYPROFILE-MIB ; jnxLsysSpNATstaticruleMIB MODULE-IDENTITY LAST-UPDATED "201005191644Z" -- May 19, 2010 ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO "Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net HTTP://www.juniper.net" DESCRIPTION "This module defines the NAT-static-rule-specific MIB for Juniper Enterprise Logical-System (LSYS) security profiles. Juniper documentation is recommended as the reference. The LSYS security profile provides various static and dynamic resource management by observing resource quota limits. Security NAT-static-rule resource is the focus in this MIB. " ::= { jnxLsysSpNATstaticrule 1 } jnxLsysSpNATstaticruleObjects OBJECT IDENTIFIER ::= { jnxLsysSpNATstaticruleMIB 1 } jnxLsysSpNATstaticruleSummary OBJECT IDENTIFIER ::= { jnxLsysSpNATstaticruleMIB 2 } -- ********************************************************************** -- Tabular NAT-static-rule resource information objects per LSYS: -- Below are NAT-static-rule resource table indexed by LSYS name. -- ********************************************************************** -- The NAT-static-rule resource table per LSYS jnxLsysSpNATstaticruleTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxLsysSpNATstaticruleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LSYSPROFILE NAT-static-rule objects for NAT-static-rule resource consumption per LSYS." ::= { jnxLsysSpNATstaticruleObjects 1 } jnxLsysSpNATstaticruleEntry OBJECT-TYPE SYNTAX JnxLsysSpNATstaticruleEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in NAT-static-rule resource table." INDEX { IMPLIED jnxLsysSpNATstaticruleLsysName } ::= { jnxLsysSpNATstaticruleTable 1 } JnxLsysSpNATstaticruleEntry ::= SEQUENCE { jnxLsysSpNATstaticruleLsysName DisplayString, jnxLsysSpNATstaticruleProfileName DisplayString, jnxLsysSpNATstaticruleUsage Unsigned32, jnxLsysSpNATstaticruleReserved Unsigned32, jnxLsysSpNATstaticruleMaximum Unsigned32 } -- Entry definitions for the NAT-static-rule resource table jnxLsysSpNATstaticruleLsysName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of the logical system for which NAT-static-rule resource information is retrieved. " ::= { jnxLsysSpNATstaticruleEntry 1 } jnxLsysSpNATstaticruleProfileName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "The security profile name string for the LSYS." ::= { jnxLsysSpNATstaticruleEntry 2 } jnxLsysSpNATstaticruleUsage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current resource usage count for the LSYS." ::= { jnxLsysSpNATstaticruleEntry 3 } jnxLsysSpNATstaticruleReserved OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The reserved resource count for the LSYS." ::= { jnxLsysSpNATstaticruleEntry 4 } jnxLsysSpNATstaticruleMaximum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum allowed resource usage count for the LSYS." ::= { jnxLsysSpNATstaticruleEntry 5 } -- ********************************************************************** -- The NAT-static-rule resource information summary: -- ********************************************************************** jnxLsysSpNATstaticruleUsedAmount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The NAT-static-rule resource consumption over all LSYS." ::= { jnxLsysSpNATstaticruleSummary 1 } jnxLsysSpNATstaticruleMaxQuota OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The NAT-static-rule resource maximum quota for the whole device for all LSYS." ::= { jnxLsysSpNATstaticruleSummary 2 } jnxLsysSpNATstaticruleAvailableAmount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The NAT-static-rule resource available in the whole device." ::= { jnxLsysSpNATstaticruleSummary 3 } jnxLsysSpNATstaticruleHeaviestUsage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The most amount of NAT-static-rule resource consumed of a LSYS." ::= { jnxLsysSpNATstaticruleSummary 4 } jnxLsysSpNATstaticruleHeaviestUser OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LSYS name that consume the most NAT-static-rule resource." ::= { jnxLsysSpNATstaticruleSummary 5 } jnxLsysSpNATstaticruleLightestUsage OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The least amount of NAT-static-rule resource consumed of a LSYS." ::= { jnxLsysSpNATstaticruleSummary 6 } jnxLsysSpNATstaticruleLightestUser OBJECT-TYPE SYNTAX DisplayString (SIZE(1..64)) MAX-ACCESS read-only STATUS current DESCRIPTION "The LSYS name that consume the least NAT-static-rule resource." ::= { jnxLsysSpNATstaticruleSummary 7 } -- *************************************************************** -- definition of NAT-static-rule resource related traps. (TBD) -- *************************************************************** -- -- End of File -- END