--
-- Juniper Enterprise Specific MIB: Structure of Management Information
-- 
-- Copyright (c) 2010-2011, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--


JUNIPER-LSYSSP-NATCONEBIND-MIB DEFINITIONS ::= BEGIN
   IMPORTS
      MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, 
      Unsigned32
        FROM SNMPv2-SMI
      DisplayString
        FROM SNMPv2-TC
      jnxLsysSpNATconebind                  
        FROM JUNIPER-LSYS-SECURITYPROFILE-MIB
    ;
    
    jnxLsysSpNATconebindMIB MODULE-IDENTITY
        LAST-UPDATED  "201005191644Z" -- May 19, 2010
        ORGANIZATION  "Juniper Networks, Inc."
        CONTACT-INFO
            "Juniper Technical Assistance Center
             Juniper Networks, Inc.
             1194 N. Mathilda Avenue
             Sunnyvale, CA 94089

             E-mail: support@juniper.net
             HTTP://www.juniper.net"
        DESCRIPTION
            "This module defines the NAT-cone-bind-specific MIB for 
             Juniper Enterprise Logical-System (LSYS) security profiles.  
             Juniper documentation is recommended as the reference. 

             The LSYS security profile provides various static and dynamic 
             resource management by observing resource quota limits. 
             Security NAT-cone-bind resource is the focus in this MIB. 
            "
        ::= { jnxLsysSpNATconebind 1 }

    jnxLsysSpNATconebindObjects  OBJECT IDENTIFIER ::= { jnxLsysSpNATconebindMIB 1 }
    jnxLsysSpNATconebindSummary  OBJECT IDENTIFIER ::= { jnxLsysSpNATconebindMIB 2 }
    
 
-- **********************************************************************
-- Tabular NAT-cone-bind resource information objects per LSYS:
--   Below are NAT-cone-bind resource table indexed by LSYS name.
-- **********************************************************************

-- The NAT-cone-bind resource table per LSYS

    jnxLsysSpNATconebindTable OBJECT-TYPE
        SYNTAX              SEQUENCE OF JnxLsysSpNATconebindEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION 
            "LSYSPROFILE NAT-cone-bind objects for NAT-cone-bind 
             resource consumption per LSYS."  
    ::= { jnxLsysSpNATconebindObjects 1 }
    
    jnxLsysSpNATconebindEntry OBJECT-TYPE
        SYNTAX              JnxLsysSpNATconebindEntry
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION  
            "An entry in NAT-cone-bind resource table."
    INDEX { IMPLIED jnxLsysSpNATconebindLsysName }          
    ::= { jnxLsysSpNATconebindTable 1 }          

    JnxLsysSpNATconebindEntry ::= 
       SEQUENCE {
          jnxLsysSpNATconebindLsysName    DisplayString,
          jnxLsysSpNATconebindProfileName DisplayString,
          jnxLsysSpNATconebindUsage       Unsigned32,
          jnxLsysSpNATconebindReserved    Unsigned32,
          jnxLsysSpNATconebindMaximum     Unsigned32
    }   
 
-- Entry definitions for the NAT-cone-bind resource table
 
    jnxLsysSpNATconebindLsysName       OBJECT-TYPE
        SYNTAX              DisplayString (SIZE(1..64))
        MAX-ACCESS          not-accessible
        STATUS              current
        DESCRIPTION
            "The name of the logical system for which NAT-cone-bind 
             resource information is retrieved. "
        ::= { jnxLsysSpNATconebindEntry 1 }

    jnxLsysSpNATconebindProfileName    OBJECT-TYPE
        SYNTAX              DisplayString (SIZE(1..32))
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
            "The security profile name string for the LSYS."
    ::= { jnxLsysSpNATconebindEntry 2 }

    jnxLsysSpNATconebindUsage          OBJECT-TYPE
        SYNTAX              Unsigned32
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION  
            "The current resource usage count for the LSYS."
    ::= { jnxLsysSpNATconebindEntry 3 }
    
    jnxLsysSpNATconebindReserved       OBJECT-TYPE
        SYNTAX              Unsigned32
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
            "The reserved resource count for the LSYS."
    ::= { jnxLsysSpNATconebindEntry 4 } 

    jnxLsysSpNATconebindMaximum        OBJECT-TYPE
        SYNTAX              Unsigned32
        MAX-ACCESS          read-only
        STATUS              current
        DESCRIPTION
            "The maximum allowed resource usage count for the LSYS."
    ::= { jnxLsysSpNATconebindEntry 5 }


-- **********************************************************************
-- The NAT-cone-bind resource information summary:
-- **********************************************************************

    jnxLsysSpNATconebindUsedAmount         OBJECT-TYPE
        SYNTAX                  Unsigned32 
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION
           "The NAT-cone-bind resource consumption over all LSYS."
    ::= { jnxLsysSpNATconebindSummary 1 }          

    jnxLsysSpNATconebindMaxQuota           OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The NAT-cone-bind resource maximum quota for the whole 
            device for all LSYS."
    ::= { jnxLsysSpNATconebindSummary 2 }
    
    jnxLsysSpNATconebindAvailableAmount    OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The NAT-cone-bind resource available in the whole device."
    ::= { jnxLsysSpNATconebindSummary 3 }
    
    jnxLsysSpNATconebindHeaviestUsage      OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The most amount of NAT-cone-bind resource consumed of a 
            LSYS."
    ::= { jnxLsysSpNATconebindSummary 4 }
    
    jnxLsysSpNATconebindHeaviestUser       OBJECT-TYPE
        SYNTAX                  DisplayString (SIZE(1..64))
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The LSYS name that consume the most NAT-cone-bind resource."
    ::= { jnxLsysSpNATconebindSummary 5 }
    
    jnxLsysSpNATconebindLightestUsage      OBJECT-TYPE
        SYNTAX                  Unsigned32
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The least amount of NAT-cone-bind resource consumed of a 
            LSYS."
    ::= { jnxLsysSpNATconebindSummary 6 }
    
    jnxLsysSpNATconebindLightestUser       OBJECT-TYPE
        SYNTAX                  DisplayString (SIZE(1..64))
        MAX-ACCESS              read-only
        STATUS                  current
        DESCRIPTION 
           "The LSYS name that consume the least NAT-cone-bind resource."
    ::= { jnxLsysSpNATconebindSummary 7 }
    


 -- ***************************************************************
 -- definition of NAT-cone-bind resource related traps. (TBD)
 -- ***************************************************************

--
-- End of File 
--

END