-- -- Juniper Enterprise Specific MIB: Collector PIC MIB -- -- Copyright (c) 2003, 2005-2006, Juniper Networks, Inc. -- All rights reserved. -- -- The contents of this document are subject to change without notice. -- JUNIPER-COLLECTOR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter64, Gauge32, Integer32, NOTIFICATION-TYPE, OBJECT-IDENTITY, TimeTicks FROM SNMPv2-SMI DateAndTime, TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC ifIndex, ifDescr FROM IF-MIB InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC2851 CounterBasedGauge64 FROM HCNUM-TC jnxMibs, jnxCollectorNotifications FROM JUNIPER-SMI; jnxCollectorMIB MODULE-IDENTITY LAST-UPDATED "200311130000Z" -- Nov 13, 2003 ORGANIZATION "Juniper Networks, Inc." CONTACT-INFO " Juniper Technical Assistance Center Juniper Networks, Inc. 1194 N. Mathilda Avenue Sunnyvale, CA 94089 E-mail: support@juniper.net" DESCRIPTION "Provides data about each of the Collector PICs on a router." -- revision history REVISION "200311130000Z" DESCRIPTION "Initial revision." ::= { jnxMibs 28 } JnxCollPicStateDef ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifies specific error conditions that may exist on a Collector PIC." SYNTAX BITS { jnxCollStateSoftOverload(0), -- soft flow overload jnxCollStateHardOverload(1), -- hard flow overload jnxCollStateMemoryUnavail(2) -- unavailable memory } -- -- Global Stats -- jnxCollGlobalStats OBJECT-IDENTITY STATUS current DESCRIPTION "Global, router-wide collector stats." ::= { jnxCollectorMIB 1 } jnxCollGlobalCreatedFiles OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of file created by all the collector pics on the router since the last time the router was reset." ::= { jnxCollGlobalStats 1 } jnxCollGlobalOpenFiles OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of open collector files currently present on the router." ::= { jnxCollGlobalStats 2 } -- -- Per-Collector PIC data -- jnxCollPicIfTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxCollPicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data about each collector pic currently present on the router." ::= { jnxCollectorMIB 2 } jnxCollPicIfEntry OBJECT-TYPE SYNTAX JnxCollPicEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry provides information about a single Collector PIC. Each Collector PIC contains a single interface and is identified by its ifIndex." INDEX { ifIndex } ::= { jnxCollPicIfTable 1 } JnxCollPicEntry ::= SEQUENCE { -- -- File statistics -- jnxCollPicIfCreatedFiles Counter64, jnxCollPicIfCreatedFileRate Gauge32, jnxCollPicIfPeakCreatedFileRate Gauge32, jnxCollPicIfExportedFiles Counter64, jnxCollPicIfExportedFileRate Gauge32, jnxCollPicIfPeakExportedFileRate Gauge32, jnxCollPicIfDestroyedFiles Counter64, jnxCollPicIfDestroyedFileRate Gauge32, jnxCollPicIfPeakDestroyedFileRate Gauge32, -- -- Record statistics -- jnxCollPicIfProcRecords Counter64, jnxCollPicIfProcRecordsRate Gauge32, jnxCollPicIfPeakProcRecordsRate Gauge32, -- -- Memory statistics -- jnxCollPicIfMemoryUsed CounterBasedGauge64, jnxCollPicIfMemoryFree CounterBasedGauge64, -- -- Ftp statistics -- jnxCollPicIfFtpBytes Counter64, jnxCollPicIfFtpByteRate Gauge32, jnxCollPicIfPeakFtpByteRate Gauge32, jnxCollPicIfFtpFiles Counter64, jnxCollPicIfFtpFileRate Gauge32, jnxCollPicIfPeakFtpFileRate Gauge32, jnxCollPicIfFtpFailures CounterBasedGauge64, -- -- Error state information -- jnxCollPicIfCurrentState JnxCollPicStateDef, jnxCollPicIfLastStateChange JnxCollPicStateDef, jnxCollPicIfStateChangeTime TimeTicks, jnxCollPicIfStateChangeDate DateAndTime, jnxCollPicIfStateChangeType INTEGER } -- -- File statistics -- jnxCollPicIfCreatedFiles OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of files created by this Collector PIC since the last time the PIC was reset." ::= { jnxCollPicIfEntry 1 } jnxCollPicIfCreatedFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of files created per second, measured over the current 10 second interval." ::= { jnxCollPicIfEntry 2 } jnxCollPicIfPeakCreatedFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of files created per second." ::= { jnxCollPicIfEntry 3 } jnxCollPicIfExportedFiles OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of files exported by this Collector PIC." ::= { jnxCollPicIfEntry 4 } jnxCollPicIfExportedFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of files exported per second, measured over the current 10 second interval." ::= { jnxCollPicIfEntry 5 } jnxCollPicIfPeakExportedFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of files exported per second." ::= { jnxCollPicIfEntry 6 } jnxCollPicIfDestroyedFiles OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of files destroyed by this Collector PIC." ::= { jnxCollPicIfEntry 7 } jnxCollPicIfDestroyedFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of files destroyed per second, as measured over the current 10 second interval." ::= { jnxCollPicIfEntry 8 } jnxCollPicIfPeakDestroyedFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of files destroyed per second." ::= { jnxCollPicIfEntry 9 } -- -- Record statistics -- jnxCollPicIfProcRecords OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of flow records processed by this Collector PIC." ::= { jnxCollPicIfEntry 10 } jnxCollPicIfProcRecordsRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flow records processed per seconds, measured during the current 10 second interval." ::= { jnxCollPicIfEntry 11 } jnxCollPicIfPeakProcRecordsRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of flow records processed." ::= { jnxCollPicIfEntry 12 } -- -- Memory statistics -- jnxCollPicIfMemoryUsed OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of memory used, in bytes, by this Collector PIC." ::= { jnxCollPicIfEntry 13 } jnxCollPicIfMemoryFree OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The amount of memory free, in bytes, on this Collector PIC." ::= { jnxCollPicIfEntry 14 } -- -- Ftp statistics -- jnxCollPicIfFtpBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of bytes transferred via FTP by this Collector PIC." ::= { jnxCollPicIfEntry 15 } jnxCollPicIfFtpByteRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of bytes per second transfered via FTP measured during the current 10 second interval." ::= { jnxCollPicIfEntry 16 } jnxCollPicIfPeakFtpByteRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of bytes per second transferred via FTP." ::= { jnxCollPicIfEntry 17 } jnxCollPicIfFtpFiles OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of files transferred via FTP by this Collector PIC." ::= { jnxCollPicIfEntry 18 } jnxCollPicIfFtpFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of files per second transferred via FTP." ::= { jnxCollPicIfEntry 19 } jnxCollPicIfPeakFtpFileRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of files per second transferred via FTP." ::= { jnxCollPicIfEntry 20 } jnxCollPicIfFtpFailures OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of FTP transfer failures on this Collector PIC." ::= { jnxCollPicIfEntry 21 } -- -- Error State Information -- jnxCollPicIfCurrentState OBJECT-TYPE SYNTAX JnxCollPicStateDef MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of various error conditions on this Collector PIC." ::= { jnxCollPicIfEntry 22 } jnxCollPicIfLastStateChange OBJECT-TYPE SYNTAX JnxCollPicStateDef MAX-ACCESS read-only STATUS current DESCRIPTION "Identifies the error condition that last changed state." ::= { jnxCollPicIfEntry 23 } jnxCollPicIfStateChangeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC." ::= { jnxCollPicIfEntry 24 } jnxCollPicIfStateChangeDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The system date and time when the management subsystem last learned of a change to the value of jnxCollPicIfCurrentState for this Collector PIC." ::= { jnxCollPicIfEntry 25 } jnxCollPicIfStateChangeType OBJECT-TYPE SYNTAX INTEGER { none (1), set (2), cleared (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "This indicates whether the last state change set a new error condition or cleared an existing one." ::= { jnxCollPicIfEntry 26 } -- -- Per Collector file data -- jnxCollFileTable OBJECT-TYPE SYNTAX SEQUENCE OF JnxCollFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Data about each collector file currently present on the router." ::= { jnxCollectorMIB 3 } jnxCollFileEntry OBJECT-TYPE SYNTAX JnxCollFileEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry provides information about a single file currently open on this Collector PIC. Each Collector PIC File is identified by the ifIndex associated with the Collector PIC and the name of the file." INDEX { ifIndex, jnxCollFileName } ::= { jnxCollFileTable 1 } JnxCollFileEntry ::= SEQUENCE { jnxCollFileName DisplayString, jnxCollFileFname DisplayString, jnxCollFileRecords CounterBasedGauge64, jnxCollFileRecordRate Gauge32, jnxCollFilePeakRecordRate Gauge32, jnxCollFileUncompBytes CounterBasedGauge64, jnxCollFileUncompByteRate Gauge32, jnxCollFilePeakUncompByteRate Gauge32, jnxCollFileCompBytes CounterBasedGauge64, jnxCollFileCompByteRate Gauge32, jnxCollFilePeakCompByteRate Gauge32, jnxCollFileBlocks Gauge32, jnxCollFileCompBlocks Gauge32, jnxCollFileTransferAttempts Gauge32, jnxCollFileState INTEGER } jnxCollFileName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..115)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The name of a Collector File on this Collector PIC." ::= { jnxCollFileEntry 1 } jnxCollFileFname OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of a Collector File on this Collector PIC. This object is included for those NM applications that can't parse the file name from the instance portion of the OIDs and provides the value of jnxCollFileName explicitly." ::= { jnxCollFileEntry 2 } jnxCollFileRecords OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flow records in this file." ::= { jnxCollFileEntry 3 } jnxCollFileRecordRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of flow records per second added to this file, measured during the current 10 second interval." ::= { jnxCollFileEntry 4 } jnxCollFilePeakRecordRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of flow records per second added to this file." ::= { jnxCollFileEntry 5 } jnxCollFileUncompBytes OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncompressed bytes in this file." ::= { jnxCollFileEntry 6 } jnxCollFileUncompByteRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of uncompressed bytes per second added to this file." ::= { jnxCollFileEntry 7 } jnxCollFilePeakUncompByteRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of uncompressed bytes per second added to this file." ::= { jnxCollFileEntry 8 } jnxCollFileCompBytes OBJECT-TYPE SYNTAX CounterBasedGauge64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of compressed bytes in this file." ::= { jnxCollFileEntry 9 } jnxCollFileCompByteRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of compressed bytes per second added to this file, measured during the current 10 second interval." ::= { jnxCollFileEntry 10 } jnxCollFilePeakCompByteRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peak number of compressed bytes per second added to this file." ::= { jnxCollFileEntry 11 } jnxCollFileBlocks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of blocks in this file." ::= { jnxCollFileEntry 12 } jnxCollFileCompBlocks OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of compressed blocks in this file." ::= { jnxCollFileEntry 14 } jnxCollFileTransferAttempts OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of FTP transfer attempts for this file." ::= { jnxCollFileEntry 15 } jnxCollFileState OBJECT-TYPE SYNTAX INTEGER { unknown(1), active (2), -- file is actively receiving flow records wait (3), -- file is waiting for export export1(4), -- file is being exported to the primary server export2(5) -- file is being exported to the secondary server } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of this file." ::= { jnxCollFileEntry 16 } -- -- Collector PIC Notification objects -- jnxCollNotifyVars OBJECT-IDENTITY STATUS current DESCRIPTION "Notification object definitions." ::= { jnxCollectorMIB 4 } jnxCollNotifyUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The URL associated with a file transfer destination." ::= { jnxCollNotifyVars 1 } jnxCollNotifyInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used with jnxCollNotifyInetAddress to identify a specific file transfer destination." ::= { jnxCollNotifyVars 2 } jnxCollNotifyInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used with jnxCollNotifyInetType to identify a specific file transfer destination." ::= { jnxCollNotifyVars 3 } jnxCollNotifyError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Description of error encountered when trying to transfer a file." ::= { jnxCollNotifyVars 4 } jnxCollNotifyFile OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Identifies a specific file for notifications that refer to a file." ::= { jnxCollNotifyVars 5 } jnxCollNotifyFtpResultCode OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provides the FTP result code for file transfer notifications." ::= { jnxCollNotifyVars 6 } jnxCollNotifyFtpErrorText OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provides the FTP error text for file transfer notifications." ::= { jnxCollNotifyVars 7 } jnxCollNotifyMemUtil OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provides the current memory utilization for pic overload notifications." ::= { jnxCollNotifyVars 8 } jnxCollNotifyMemFree OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provides the current amount of free memory for pic overload notifications." ::= { jnxCollNotifyVars 9 } jnxCollNotifyMemThresh OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provides the current memory threshold used for determining memory unavailable conditions." ::= { jnxCollNotifyVars 10 } jnxCollNotifyNewRecordRate OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provides the current number of new records per second created on this Collector PIC." ::= { jnxCollNotifyVars 11 } jnxCollNotifyOverloadType OBJECT-TYPE SYNTAX INTEGER { softOverload (1), hardOverload (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Identifies a specific type of flow overload condition on this Collector PIC." ::= { jnxCollNotifyVars 12 } jnxCollNotifyDate OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Provides the current system date and time." ::= { jnxCollNotifyVars 13 } jnxCollNotifyFromFtpServerInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used with jnxCollNotifyFromFtpServerInetAddress to identify a specific FTP server address." ::= { jnxCollNotifyVars 14 } jnxCollNotifyFromFtpServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The FTP server address from which the switchover occurs." ::= { jnxCollNotifyVars 15 } jnxCollNotifyFromFtpServerType OBJECT-TYPE SYNTAX INTEGER { primary (1), secondary (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The FTP server Type from which the switchover occurs." ::= { jnxCollNotifyVars 16 } jnxCollNotifyToFtpServerInetType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Used with jnxCollNotifyToFtpServerInetAddress to identify a specific FTP server address." ::= { jnxCollNotifyVars 17 } jnxCollNotifyToFtpServerInetAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The FTP server address to which the switchover occurs." ::= { jnxCollNotifyVars 18 } jnxCollNotifyToFtpServerType OBJECT-TYPE SYNTAX INTEGER { primary (1), secondary (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The FTP server Type to which the switchover occurs." ::= { jnxCollNotifyVars 19 } jnxCollNotifyInitiatedBy OBJECT-TYPE SYNTAX INTEGER { cli (1), automatic (2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Identify what initiates the FTP switchover." ::= { jnxCollNotifyVars 20 } -- -- Collector PIC Notification definitions -- jnxCollNotificationPrefix OBJECT-IDENTITY STATUS current DESCRIPTION "All collector notifications are registered under this branch." ::= { jnxCollectorNotifications 0 } jnxCollUnavailableDest NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollNotifyDate, jnxCollNotifyUrl, jnxCollNotifyInetType, jnxCollNotifyInetAddress } STATUS current DESCRIPTION "Notification of an unavailable destination failure encountered while transferring a collector file." ::= { jnxCollNotificationPrefix 1 } jnxCollUnavailableDestCleared NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollNotifyDate, jnxCollNotifyUrl, jnxCollNotifyInetType, jnxCollNotifyInetAddress } STATUS current DESCRIPTION "This indicates a previous unavailable destination failure has been resolved." ::= { jnxCollNotificationPrefix 2 } jnxCollUnsuccessfulTransfer NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollNotifyDate, jnxCollNotifyFile, jnxCollNotifyUrl, jnxCollNotifyInetType, jnxCollNotifyInetAddress, jnxCollNotifyError, jnxCollNotifyFtpResultCode, jnxCollNotifyFtpErrorText } STATUS current DESCRIPTION "This indicates an error was encountered while attempting a file transfer." ::= { jnxCollNotificationPrefix 3 } jnxCollFlowOverload NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollPicIfStateChangeDate, jnxCollNotifyOverloadType, jnxCollNotifyNewRecordRate, jnxCollPicIfCreatedFiles, jnxCollPicIfDestroyedFiles} STATUS current DESCRIPTION "This indicates a soft or hard flow overload condition has been triggered." ::= { jnxCollNotificationPrefix 4 } jnxCollFlowOverloadCleared NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollPicIfStateChangeDate, jnxCollNotifyOverloadType, jnxCollNotifyNewRecordRate, jnxCollPicIfCreatedFiles, jnxCollPicIfDestroyedFiles } STATUS current DESCRIPTION "This indicates a soft or hard flow overload condition has been cleared." ::= { jnxCollNotificationPrefix 5 } jnxCollMemoryUnavailable NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollPicIfStateChangeDate, jnxCollNotifyMemThresh, jnxCollNotifyMemUtil, jnxCollNotifyMemFree } STATUS current DESCRIPTION "This indicates a memory unavailable condition has been triggered." ::= { jnxCollNotificationPrefix 6 } jnxCollMemoryAvailable NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollPicIfStateChangeDate, jnxCollNotifyMemThresh, jnxCollNotifyMemUtil, jnxCollNotifyMemFree } STATUS current DESCRIPTION "This indicates a memory unavailable condition has been cleared." ::= { jnxCollNotificationPrefix 7 } jnxCollFtpSwitchover NOTIFICATION-TYPE OBJECTS { ifDescr, jnxCollNotifyDate, jnxCollNotifyFromFtpServerInetType, jnxCollNotifyFromFtpServerInetAddress, jnxCollNotifyFromFtpServerType, jnxCollNotifyToFtpServerInetType, jnxCollNotifyToFtpServerInetAddress, jnxCollNotifyToFtpServerType, jnxCollNotifyInitiatedBy } STATUS current DESCRIPTION "This indicates an FTP server switchover has occurred." ::= { jnxCollNotificationPrefix 8 } END