--
-- Juniper Enterprise Specific MIB: J-Series FWDD (Forwarding Daemon) MIB
-- 
-- Copyright (c) 2006, Juniper Networks, Inc.
-- All rights reserved.
--
-- The contents of this document are subject to change without notice.
--

JUNIPER-CHASSIS-FWDD-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, OBJECT-TYPE, Gauge32, Integer32
        FROM SNMPv2-SMI
    jnxMibs
        FROM JUNIPER-SMI;

jnxFwdd MODULE-IDENTITY
    LAST-UPDATED "200602162158Z" -- Thurs Feb 16 21:58:00 2006 UTC
    ORGANIZATION "Juniper Networks, Inc."
    CONTACT-INFO
            "        Juniper Technical Assistance Center
                     Juniper Networks, Inc.
                     1194 N. Mathilda Avenue
                     Sunnyvale, CA 94089
                     E-mail: support@juniper.net"

    DESCRIPTION
            "This is Juniper Networks' implementation of enterprise
	     specific MIB for J-Series FWDD module from the router chassis box."
    ::= { jnxMibs 34 }


--
-- FWDD Process Info
--

jnxFwddProcess 	  OBJECT IDENTIFIER ::= { jnxFwdd 1 }


	jnxFwddMicroKernelCPUUsage OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The FWDD Micro Kernel CPU utilization in percentage.
         Zero if unavailable or inapplicable."
	::= { jnxFwddProcess 1 }

	jnxFwddRtThreadsCPUUsage OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The FWDD Realtime threads total CPU utilization in percentage.
         Zero if unavailable or inapplicable."
	::= { jnxFwddProcess 2 }

	jnxFwddHeapUsage OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The FWDD Heap utilization in percentage.
         Zero if unavailable or inapplicable."
	::= { jnxFwddProcess 3 }

	jnxFwddDmaMemUsage OBJECT-TYPE
	SYNTAX		Gauge32
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The FWDD DMA Memory utilization in percentage.
         Zero if unavailable or inapplicable."
	::= { jnxFwddProcess 4 }

	jnxFwddUpTime OBJECT-TYPE
	SYNTAX		Integer32
	UNITS		"seconds"
	MAX-ACCESS	read-only
	STATUS		current
	DESCRIPTION
		"The FWDD Module uptime expressed in seconds.
         Zero if unavailable or inapplicable."
	::= { jnxFwddProcess 5 }

END