-- ----------------------------------------------------------------------------- -- MIB NAME : Mac Based Authentication Common mib -- FILE NAME: mba.mib -- DATE : 2010/03/23 -- VERSION : 2.10 -- PURPOSE : To construct the MIB structure of MAC-based Access Control -- for proprietary enterprise -- ----------------------------------------------------------------------------- -- MODIFICTION HISTORY: -- ----------------------------------------------------------------------------- -- Version, Date, Author -- Description: -- [New Object] -- [Modification] -- Notes: (Requested by who and which project) -- -- Revision 2.10 2010/03/23, Shawn -- [New Object] -- [1]Added swMacBasedAuthStateTable for displaying MAC-based Access Control per -- VLAN authentication. -- [Modification] -- [1]Added time expired definition in swMacBasedAuthInfoAgingTime and -- swMacBasedAuthInfoBlockTime. -- Requested by Shawn for DGS-36XX. -- -- Revision 2.09 2009/09/18, Peter Hsieh -- [New Object] -- [1]Added swMacBasedAuthTrapState and swMacBasedAuthLogState in swMBACtrl -- to configure trap and log state. -- Requested by Peter Hsieh for DES-32XX. -- -- Revision 2.08 2009/08/21, Shawn -- [Modification] -- [1]Rename "swMacBasedAuthInfoHoldTime" to "swMacBasedAuthInfoBlockTime". -- [2]Rename "swMacBasedAuthPortHoldTime" to "swMacBasedAuthPortBlockTime". -- [3]Change the value list "failure(5)" to "blocked(5)" in swMacBasedAuthInfoStatus. -- [4]Change the string length of swMacBasedAccessControlPWD from 32 to 16. -- [5]Modify the description of swMacBasedAuthRadiusAuthorization and swMacBasedAuthLocalAuthorization -- for modify term "authorization network" to "authorization attributes". -- [6]Change the "Auth" to "AccessControl" in Trap object IDs'. -- [7]Change "MAC-based authentication" to "MAC-based Access Control" in all relevant -- objects' description. -- -- Revision 2.07 2009/05/07,Eli Lin -- [New Object] -- [1]Add object swMacBasedAuthInfoAssignVID in swMacBasedAuthPortInfoEntry. -- -- Revision 2.06 2009/1/21,Shawn -- [New Object] -- [1]Add objects swMacBasedAuthInfoPriority -- for display the priority that the port/mac is assigned to after it passes authentication, -- [2]Add swMacBasedAuthInfoAgingTime -- for display remaining time until the authenticated client returns to unauthenticated state -- and swMacBasedAuthInfoHoldTime in swMacBasedAuthPortInfoTable -- for display remaining time until the authentication failure client is allowed to start a new authentication. -- -- Revision 2.05 2008/12/02,Shawn -- [New Object] -- [1]Add object swMacBasedAuthDatabaseVID in swMacBasedAuthDatabaseTable. -- [2]Add objects swMacBasedAuthRadiusAuthorization and swMacBasedAuthLocalAuthorization in swMBACtrl. -- [Modification] -- [1]Obsolete object swMacBasedAuthDatabaseVlanName in swMacBasedAuthDatabaseTable. -- -- Version 2.04,2008/10/21,Shawn -- [New Object] -- [1]add object swMacBasedAuthFailOver; -- -- Version 2.03,2008/09/05,Shawn -- [New Object] -- [1]add object swMacBasedAuthMaxUser; -- [2]add swMacBasedAuthPortMaxUser in table swMacBasedAuthPortTable; -- -- Version 2.02,2008/02/29,Bonnie -- [New Object] -- [1]add object swMacBasedAuthClearAllAction; -- [2]add swMacBasedAuthClearMacAction in table swMacBasedAuthPortInfoTable; -- [3]add swMacBasedAuthPortMode, swMacBasedAuthPortAgingTime, -- swMacBasedAuthPortHoldTime and swMacBasedAuthClearPortAction -- in table swMacBasedAuthPortTable; -- -- Version 2.01,2007/12/29,Jeffers -- [New Object] -- for implement trap. -- add objects swMacBasedAuthLoggedSuccess,swMacBasedAuthLoggedFail, -- swMacBasedAuthAgesOut and swMacBasedAuthVID -- -- Version 2.00, 2007/03/27, Yedda -- This is the first formal version for universal MIB definition. -- ----------------------------------------------------------------------------- Mac-Based-Authentication-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY,OBJECT-TYPE FROM SNMPv2-SMI MacAddress,RowStatus,DisplayString FROM SNMPv2-TC VlanId FROM Q-BRIDGE-MIB dlink-common-mgmt FROM DLINK-ID-REC-MIB; swMBAMIB MODULE-IDENTITY LAST-UPDATED "1003230000Z" ORGANIZATION "D-Link Corp." CONTACT-INFO "http://support.dlink.com" DESCRIPTION "." ::= { dlink-common-mgmt 35 } PortList ::= OCTET STRING(SIZE (0..127)) swMBACtrl OBJECT IDENTIFIER ::= { swMBAMIB 1 } swMBAInfo OBJECT IDENTIFIER ::= { swMBAMIB 2 } swMBAPortMgmt OBJECT IDENTIFIER ::= { swMBAMIB 3 } swMBAMgmt OBJECT IDENTIFIER ::= { swMBAMIB 4 } -- ----------------------------------------------------------------------------- swMacBasedAuthState OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables the MAC-based Access Control status of the device." ::= { swMBACtrl 1 } swMacBasedAuthMethod OBJECT-TYPE SYNTAX INTEGER { local(1), radius(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the type of authentication method. The RADIUS method is authenticated per authentication server." ::= { swMBACtrl 2 } swMacBasedAuthPWD OBJECT-TYPE SYNTAX DisplayString(SIZE(1..16)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the password of the RADIUS authentication method." ::= { swMBACtrl 3 } swMacBasedAuthVlanName OBJECT-TYPE SYNTAX DisplayString(SIZE(0..32)) MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the VLAN name of the MAC-based Access Control guest VLAN." ::= { swMBACtrl 4 } swMacBasedAuthMemberPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the member ports of the MAC-based Access Control guest VLAN." ::= { swMBACtrl 5 } --swMacBasedAuthRelativeVLAN OBJECT-TYPE -- SYNTAX DisplayString(SIZE(0..32)) -- MAX-ACCESS read-write -- STATUS current -- DESCRIPTION -- "This object indicates the associated VLAN name of the authentication method." -- ::= { swMBACtrl 6 } swMacBasedAuthVlanNameDelState OBJECT-TYPE SYNTAX INTEGER{ none(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to delete the guest VLAN of MAC-based Access Control." ::= { swMBACtrl 7 } swMacBasedAuthClearAllAction OBJECT-TYPE SYNTAX INTEGER{other(1), start(2)} MAX-ACCESS read-write STATUS current DESCRIPTION "Used to clear the authentication state of all ports." ::= { swMBACtrl 8 } swMacBasedAuthMaxUser OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum number of authorized client(s) on the whole device. Note: The maximum number of the authorized client(s) range is (0..N). The value N means the maximum number. This is determined by the project itself. When 0 is set, the maximum number of authorized clients is unlimited." DEFVAL {128} ::= { swMBACtrl 9 } swMacBasedAuthFailOver OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets the RADIUS authentication failover state. When the authentication failover is disabled and if the RADIUS servers are unreachable, the authentication will fail. When the authentication failover is enabled and if the RADIUS servers authentication are unreachable, the local database will be used to do the authentication. By default, the state is disabled." DEFVAL {disabled} ::= { swMBACtrl 10 } swMacBasedAuthRadiusAuthorization OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets the acceptance state of RADIUS authorization. When the authorization is enabled for MAC-based Access Control's RADIUS method, the authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the local database will be accepted if the global authorization state is enabled." DEFVAL {enabled} ::= { swMBACtrl 11 } swMacBasedAuthLocalAuthorization OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets the acceptance state of local authorization. When the authorization is enabled for MAC-based Access Control's local method, the authorized attributes assigned by the local database will be accepted if the global authorization state is enabled." DEFVAL {enabled} ::= { swMBACtrl 12 } swMacBasedAuthTrapState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable sending of MAC-based Access Control traps." DEFVAL {enabled} ::= { swMBACtrl 13 } swMacBasedAuthLogState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to enable or disable the generating of MAC-based Access Control logs." DEFVAL {enabled} ::= { swMBACtrl 14 } -- ----------------------------------------------------------------------------- -- swMBAInfo OBJECT IDENTIFIER ::= { swMBAMIB 2} -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- swMacBasedAuthPortInfoTable OBJECT IDENTIFIER ::= { swMBAInfo 1} -- ----------------------------------------------------------------------------- swMacBasedAuthPortInfoTable OBJECT-TYPE SYNTAX SEQUENCE OF SwMacBasedAuthPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that displays the authentication state of every port." ::= { swMBAInfo 1 } swMacBasedAuthPortInfoEntry OBJECT-TYPE SYNTAX SwMacBasedAuthPortInfoEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that displays the authentication state for each port." INDEX { swMacBasedAuthInfoPortIndex , swMacBasedAuthInfoMacIndex } ::= { swMacBasedAuthPortInfoTable 1 } SwMacBasedAuthPortInfoEntry ::= SEQUENCE { swMacBasedAuthInfoPortIndex INTEGER, swMacBasedAuthInfoMacIndex MacAddress, swMacBasedAuthInfoStatus INTEGER, swMacBasedAuthInfoAssignVLANName DisplayString, swMacBasedAuthClearMacAction INTEGER, swMacBasedAuthInfoPriority INTEGER, swMacBasedAuthInfoAgingTime INTEGER, swMacBasedAuthInfoBlockTime INTEGER, swMacBasedAuthInfoAssignVID INTEGER } swMacBasedAuthInfoPortIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the authenticated port number." ::= { swMacBasedAuthPortInfoEntry 1 } swMacBasedAuthInfoMacIndex OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the authenticated MAC address." ::= { swMacBasedAuthPortInfoEntry 2 } swMacBasedAuthInfoStatus OBJECT-TYPE SYNTAX INTEGER { unconnected(1), connecting(2), authenticating(3), authenticated(4), blocked(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the authenticated status." ::= { swMacBasedAuthPortInfoEntry 3 } swMacBasedAuthInfoAssignVLANName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VLAN name that the port is assigned to once MAC authentication was successful." ::= { swMacBasedAuthPortInfoEntry 4 } swMacBasedAuthClearMacAction OBJECT-TYPE SYNTAX INTEGER{ other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to start (2), the user will return to an un-authenticated state. All the timers associated with the user will be reset. When the administrator performs a get operation, it always returns the other (1). " ::= { swMacBasedAuthPortInfoEntry 5 } swMacBasedAuthInfoPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the priority that the port or MAC address is assigned to after it passes authentication. -1 will be displayed when the port or MAC address has not been assigned any priority" ::= { swMacBasedAuthPortInfoEntry 6 } swMacBasedAuthInfoAgingTime OBJECT-TYPE SYNTAX INTEGER UNITS "minutes" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the remaining time until the authenticated client returns to an unauthenticated state. -1 will be displayed before the port or MAC address passes authentication. 0 will be displayed when the aging time is set to infinite on the port. -2 indicates the host aging timeout, but MAC-based Access Control will hold this entry for expired (for stacking performance), after the time has expired, then the switch will delete it." ::= { swMacBasedAuthPortInfoEntry 7 } swMacBasedAuthInfoBlockTime OBJECT-TYPE SYNTAX INTEGER UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the remaining time until the authentication failure client is allowed to start a new authentication. -1 will be displayed after the port or MAC address passes authentication. -2 indicates the host block timeout, but MAC-based Access Control will hold this entry for expired (for stacking performance), after the time has expired, then the switch will delete it." ::= { swMacBasedAuthPortInfoEntry 8 } swMacBasedAuthInfoAssignVID OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the VID that the port is assigned to once The MAC authentication was successful." ::= { swMacBasedAuthPortInfoEntry 9 } -- ----------------------------------------------------------------------------- -- swMacBasedAuthStateTable OBJECT IDENTIFIER ::= { swMBAInfo 2} -- ----------------------------------------------------------------------------- swMacBasedAuthStateTable OBJECT-TYPE SYNTAX SEQUENCE OF SwMacBasedAuthStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table contains the MAC-based Access Control clients' authentication information." ::= { swMBAInfo 2 } swMacBasedAuthStateEntry OBJECT-TYPE SYNTAX SwMacBasedAuthStateEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This list contains the MAC-based Access Control host's authentication information." INDEX { swMacBasedAuthStatePort, swMacBasedAuthStateOriginalVID, swMacBasedAuthStateMacAddr } ::= { swMacBasedAuthStateTable 1 } SwMacBasedAuthStateEntry ::= SEQUENCE { swMacBasedAuthStatePort INTEGER, swMacBasedAuthStateOriginalVID VlanId, swMacBasedAuthStateMacAddr MacAddress, swMacBasedAuthStateAuthStatus INTEGER, swMacBasedAuthStateAssignVID VlanId, swMacBasedAuthStateAssignPriority INTEGER, swMacBasedAuthStateRemainTime INTEGER, swMacBasedAuthStateDelAction INTEGER } swMacBasedAuthStatePort OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the MAC-based Access Control host's port number." ::= { swMacBasedAuthStateEntry 1 } swMacBasedAuthStateOriginalVID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the MAC-based Access Control host's original received VLAN ID." ::= { swMacBasedAuthStateEntry 2 } swMacBasedAuthStateMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "Specifies the MAC-based Access Control host's MAC address." ::= { swMacBasedAuthStateEntry 3 } swMacBasedAuthStateAuthStatus OBJECT-TYPE SYNTAX INTEGER{ authenticated(1), authenticating(2), blocked(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the MAC-based Access Control host's authentication state." ::= { swMacBasedAuthStateEntry 4 } swMacBasedAuthStateAssignVID OBJECT-TYPE SYNTAX VlanId MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the MAC-based Access Control host's assign VLAN ID." ::= { swMacBasedAuthStateEntry 5 } swMacBasedAuthStateAssignPriority OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the MAC-based Access Control host's priority assigned when it passes authentication. -1 indicates the host has no priority assigned." ::= { swMacBasedAuthStateEntry 6 } swMacBasedAuthStateRemainTime OBJECT-TYPE SYNTAX INTEGER UNITS "minutes/seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Specifies the remaining MAC-based Access Control host's aging or block time. When host's authentication state is 'authenticated' in swMacBasedAuthStateAuthStatus, this object indicates the host's aging time, the units is minutes. When host's authentication state is 'blocked' in swMacBasedAuthStateAuthStatus, this object indicates the host's block time, the units is seconds. 0 indicates that the authenticated host on the port will never age out. -2 indicates the host aging or block timeout, but MAC-based Access Control will hold this entry for expired (for stacking performance), after the time expired, then the switch will delete it." ::= { swMacBasedAuthStateEntry 7 } swMacBasedAuthStateDelAction OBJECT-TYPE SYNTAX INTEGER{ other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to delete the specified authentication entry. Setting start(2) will delete this MAC-based Access Control host entry. " ::= { swMacBasedAuthStateEntry 25 } -- ----------------------------------------------------------------------------- -- swMBAPortMgmt OBJECT IDENTIFIER ::= { swMBAMIB 3} -- ----------------------------------------------------------------------------- swMacBasedAuthPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SwMacBasedAuthPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the method and state for every port." ::= { swMBAPortMgmt 1 } swMacBasedAuthPortEntry OBJECT-TYPE SYNTAX SwMacBasedAuthPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of method types and states for each port." INDEX { swMacBasedAuthPortIndex } ::= { swMacBasedAuthPortTable 1 } SwMacBasedAuthPortEntry ::= SEQUENCE { swMacBasedAuthPortIndex INTEGER, swMacBasedAuthPortState INTEGER, swMacBasedAuthPortMode INTEGER, swMacBasedAuthPortAgingTime INTEGER, swMacBasedAuthPortBlockTime INTEGER, swMacBasedAuthClearPortAction INTEGER, swMacBasedAuthPortMaxUser INTEGER } swMacBasedAuthPortIndex OBJECT-TYPE SYNTAX INTEGER(1..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the module's port number." ::= { swMacBasedAuthPortEntry 1 } swMacBasedAuthPortState OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object enables or disables the authentication state of this port." ::= { swMacBasedAuthPortEntry 2 } swMacBasedAuthPortMode OBJECT-TYPE SYNTAX INTEGER{ port_based(1), host_based(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the mode of this entry. port_based: All users connected to a port share the first authentication result. host_based: Each user can have its own authentication result. " DEFVAL {port_based} ::= { swMacBasedAuthPortEntry 3 } swMacBasedAuthPortAgingTime OBJECT-TYPE SYNTAX INTEGER(0..1440) MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the time period that an authenticated host will be kept in an authenticated state. When the aging time has timed out, the host will be moved back to an unauthenticated state. Note: When 0 is set on the specified port, it means that the aging has been disabled meaning that the aging time is set to infinite. " DEFVAL {1440} ::= { swMacBasedAuthPortEntry 4 } swMacBasedAuthPortBlockTime OBJECT-TYPE SYNTAX INTEGER(0..300) MAX-ACCESS read-write STATUS current DESCRIPTION "If a host fails to authenticate, the next authentication will not start within the block time unless the user clears the entry state manually. Note: When 0 is set on the specified port, it means that the block authentication fail MAC address block time is set to infinite. " DEFVAL {300} ::= { swMacBasedAuthPortEntry 5 } swMacBasedAuthClearPortAction OBJECT-TYPE SYNTAX INTEGER{ other(1), start(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "When set to start (2), the specified port will return to an un-authenticated state. All the timers associated with the specified port will be reset. When the administrator performs a get operation, it always returns the other (1). " ::= { swMacBasedAuthPortEntry 6 } swMacBasedAuthPortMaxUser OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-write STATUS current DESCRIPTION "This object indicates the maximum number of authorized client(s) on the specified port. Note: The maximum number of authorized client(s) range is (0..N). The value N means the maximum number is determined by the project itself. When 0 is set on the specified port, the maximum number of authorized client(s) has no limit." DEFVAL {128} ::= { swMacBasedAuthPortEntry 7 } -- ----------------------------------------------------------------------------- -- swMBAMgmt OBJECT IDENTIFIER ::= { swMBAMIB 4} -- ----------------------------------------------------------------------------- swMacBasedAuthDatabaseTable OBJECT-TYPE SYNTAX SEQUENCE OF SwMacBasedAuthDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the MAC-based Access Control account information." ::= { swMBAMgmt 1 } swMacBasedAuthDatabaseEntry OBJECT-TYPE SYNTAX SwMacBasedAuthDatabaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list that contains the MAC-based Access Control account information." INDEX {swMacBasedAuthDatabaseMacIndex } ::= { swMacBasedAuthDatabaseTable 1 } SwMacBasedAuthDatabaseEntry ::= SEQUENCE { swMacBasedAuthDatabaseMacIndex MacAddress, swMacBasedAuthDatabaseVlanName DisplayString, swMacBasedAuthDatabaseStatus RowStatus, swMacBasedAuthDatabaseVID INTEGER } swMacBasedAuthDatabaseMacIndex OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the MAC address for this user account." ::= { swMacBasedAuthDatabaseEntry 1 } swMacBasedAuthDatabaseVlanName OBJECT-TYPE SYNTAX DisplayString(SIZE(1..32)) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "This object indicates the VLAN name for this user account." ::= { swMacBasedAuthDatabaseEntry 2 } swMacBasedAuthDatabaseStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of this entry." ::= { swMacBasedAuthDatabaseEntry 3 } swMacBasedAuthDatabaseVID OBJECT-TYPE SYNTAX INTEGER(0..4094) MAX-ACCESS read-create STATUS current DESCRIPTION "This object indicates the VID for this user account. 0 indicates to delete the configured VID in this user account." ::= { swMacBasedAuthDatabaseEntry 5 } -- End of Table -- ----------------------------------------------------------------------------- -- swMacBasedAuthTrap -- ----------------------------------------------------------------------------- -- ----------------------------------------------------------------------------- -- Add common trap management -- ----------------------------------------------------------------------------- swMBATrap OBJECT IDENTIFIER ::= { swMBAMIB 11 } swMBANotify OBJECT IDENTIFIER ::= { swMBATrap 1 } swMBANotifyPrefix OBJECT IDENTIFIER ::= { swMBANotify 0 } -- ----------------------------------------------------------------------------- -- swMBANotifyPrefix OBJECT IDENTIFIER ::= { swMBANotify 0 } -- ----------------------------------------------------------------------------- -- agentNotifFirmware -- ----------------------------------------------------------------------------- swMacBasedAccessControlLoggedSuccess NOTIFICATION-TYPE OBJECTS { swMacBasedAuthInfoMacIndex, swMacBasedAuthInfoPortIndex, swMacBasedAuthVID } STATUS current DESCRIPTION "The trap is sent when a MAC-based Access Control host has successfully logged in." ::={swMBANotifyPrefix 1} swMacBasedAccessControlLoggedFail NOTIFICATION-TYPE OBJECTS { swMacBasedAuthInfoMacIndex, swMacBasedAuthInfoPortIndex, swMacBasedAuthVID } STATUS current DESCRIPTION "The trap is sent when a MAC-based Access Control host's login fails." ::={swMBANotifyPrefix 2} swMacBasedAccessControlAgesOut NOTIFICATION-TYPE OBJECTS { swMacBasedAuthInfoMacIndex, swMacBasedAuthInfoPortIndex, swMacBasedAuthVID } STATUS current DESCRIPTION "The trap is sent when a MAC-based Access Control host ages out." ::={swMBANotifyPrefix 3} -- ----------------------------------------------------------------------------- -- swMBANotifyBidings -- ----------------------------------------------------------------------------- swMBANotifyBidings OBJECT IDENTIFIER ::= { swMBANotify 1 } swMacBasedAuthVID OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The VLAN ID for the host already exists." ::= { swMBANotifyBidings 1} END