IBMNETU-MIB DEFINITIONS ::= BEGIN ------------------------------------------------------------------ -- IBM Network Utility Enterprise MIB (SNMP Version 1 Format) ------------------------------------------------------------------ -- -- This MIB defines the enterprise specific management -- objects for the Network Utility family of products. -- -- This MIB is defined in the SNMP version 1 SMI format. -- -- May 06, 1998 -- -- Contact Information: -- -- Randy Worzella -- IBM Corp. -- G420/664 -- Research Triangle Park, NC 27709 -- -- phone: 919-254-2202 -- email: worzella@us.ibm.com -- ------------------------------------------------------------------ IMPORTS enterprises FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212; -- Path to ibmnetu product ibm OBJECT IDENTIFIER ::= { enterprises 2 } ibmProd OBJECT IDENTIFIER ::= { ibm 6 } ibmnetu OBJECT IDENTIFIER ::= { ibmProd 150 } ------------------------------------------------------------------ -- IBM Network Utility Anchor ------------------------------------------------------------------ ibmnetuadmin OBJECT IDENTIFIER ::= { ibmnetu 1 } ibmnetusystem OBJECT IDENTIFIER ::= { ibmnetu 2 } ibmnetuhardware OBJECT IDENTIFIER ::= { ibmnetu 3 } ibmneturouting OBJECT IDENTIFIER ::= { ibmnetu 4 } ibmnetuswitching OBJECT IDENTIFIER ::= { ibmnetu 5 } ------------------------------------------------------------------ -- IBM Network Utility Administrative ------------------------------------------------------------------ ibmnetuadminproducts OBJECT IDENTIFIER ::= { ibmnetuadmin 1 } ibmnetumod400 OBJECT IDENTIFIER ::= { ibmnetuadminproducts 1 } ibmnetuadminOID OBJECT IDENTIFIER ::= { ibmnetuadmin 2 } ibmnetuadminDebug OBJECT IDENTIFIER ::= { ibmnetuadmin 3 } ------------------------------------------------------------------ -- IBM Network Utility System ------------------------------------------------------------------ ibmnetusystemInfo OBJECT IDENTIFIER ::= { ibmnetusystem 1 } ibmnetucfgInfo OBJECT IDENTIFIER ::= { ibmnetusystem 2 } ------------------------------------------------------------------ -- IBM Network Utility Hardware ------------------------------------------------------------------ ibmnetuhardwareGeneral OBJECT IDENTIFIER ::= { ibmnetuhardware 1 } ibmnetuhardware400Specific OBJECT IDENTIFIER ::= { ibmnetuhardware 2 } ------------------------------------------------------------------ -- IBM Network Utility Routing ------------------------------------------------------------------ -- Nothing defined yet !! ------------------------------------------------------------------ -- IBM Network Utility Switching ------------------------------------------------------------------ -- Nothing defined yet !! ------------------------------------------------------------------ -- Hardware Information ------------------------------------------------------------------ ------------------------------------------------------------------ -- Hardware Chip Set Information ------------------------------------------------------------------ ibmnetuEnetChipSet OBJECT IDENTIFIER ::= { ibmnetuadminOID 1 } ------------------------------------------------------------------ -- The Network Utility 10 Megabit Ethernet LAN adapters use an Ethernet -- chipset comprised of the following: -- -- MultiProtocolChip MPC-1 ASIC Toshiba -- -- 10BaseT PE65428 Pulse Engineering -- DP83912 National -- SF1012 Valor -- -- 10Base2 S553-10060AE Belfuse -- DP8392CV-1 National -- -- For the Ethernet MIB, however, the OID identifying the chipset -- will simply be enetChipSetToshiba. -- -- The Network Utility 10/100 Megabit Fast Ethernet LAN adapters use an -- Ethernet chipset comprised of the following: -- -- Controller AM79C971 Advanced Micro Devices -- -- Physical Layer DP83840A National Semi -- -- Content Addressable MU9C4480A Music Semi -- Memory -- -- TB Filter PLA Xilinx PLA Xilinx -- -- For the Ethernet MIB, however, the OID identifying the chipset -- will simply be enetChipSetAMD. -- ------------------------------------------------------------------ enetChipSetToshiba OBJECT IDENTIFIER ::= { ibmnetuEnetChipSet 1 } enetChipSetAMD OBJECT IDENTIFIER ::= { ibmnetuEnetChipSet 2 } ------------------------------------------------------------------ -- Hardware PCI Adapter Information ------------------------------------------------------------------ ibmnetuPCIAdapTable OBJECT-TYPE SYNTAX SEQUENCE OF IbmnetuPCIAdapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of information about PCI adapters in this box." ::= { ibmnetuhardwareGeneral 1 } ibmnetuPCIAdapEntry OBJECT-TYPE SYNTAX IbmnetuPCIAdapEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing objects to describe the adapter in a given slot." INDEX { ibmnetuPCIAdapSlotNum } ::= { ibmnetuPCIAdapTable 1 } IbmnetuPCIAdapEntry ::= SEQUENCE { ibmnetuPCIAdapSlotNum INTEGER, ibmnetuPCIAdapType INTEGER, ibmnetuPCIAdapOperStatus INTEGER } ibmnetuPCIAdapSlotNum OBJECT-TYPE SYNTAX INTEGER (1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "The number identifying a slot location where an adapter can be inserted." ::= { ibmnetuPCIAdapEntry 1 } ibmnetuPCIAdapType OBJECT-TYPE SYNTAX INTEGER { unknown (1), not-present (2), atm-mmf-lic294 (3), reserved1 (4), atm-smf-lic295 (5), reserved2 (6), token-ring-lic280 (7), escon-lic287 (8), reserved3 (9), reserved4 (10), serial-rs232-lic282 (11), serial-v35-lic290 (12), serial-x21-lic291 (13), ethernet-lic281 (14), ethernet-fast-lic288 (15), serial-hssi-lic289 (16), fddi-lic286 (17), reserved5 (18), reserved6 (19), parallel-channel-lic299 (20)} ACCESS read-only STATUS mandatory DESCRIPTION "The type of adapter that is inserted into this slot. If no adapter is present, the variable will take the value not-present(2). The enumerations marked reserved# are saved for future enhancements." ::= { ibmnetuPCIAdapEntry 2 } ibmnetuPCIAdapOperStatus OBJECT-TYPE SYNTAX INTEGER { unknown (1), not-configured (2), not-present (3), does-not-apply (4), enable-pending (5), enabled (6), disable-pending (7), disabled (8), not-initialized (9), unknown-device (10), hardware-error (11), not-powered (12), diagnostics (13), wrs-available (14), mis-configured (15)} ACCESS read-only STATUS mandatory DESCRIPTION "The operational status of this PCI adapter. unknown (1) : If there was problem determining the operational status of the adapter. not-configured (2) : If the adapter inserted in the slot is recognized but no router configuration exists. not-present (3) : If no adapter is currently inserted. does-not-apply (4) : If this adapter does not contain an operational state. enable-pending (5) : If commands have been issued to enable the adapter but have not been completed. enabled (6) : If commands have been successfully issued to enable the adapter. disable-pending (7) : If commands have been issued to disable the adapter but have not been completed. disabled (8) : If commands have been successfully issued to disable the adapter. not-initialized (9) : If the adapter has not completed its initialization. unknown-device (10) : If the adapter inserted in the slot can not be recognized. hardware-error (11) : If the adapter can not be used nor made ready to be used. not-powered (12) : If the adapter has had a problem obtaining power from its slot. diagnostics (13) : If the adapter is currently undergoing diagnostics. wrs-available (14) : If the adapter is currently configured and available for WAN restoral. mis-configured (15) : If the adapter is inserted in the slot but the router configuration is of a different type." ::= { ibmnetuPCIAdapEntry 3 } ------------------------------------------------------------------ -- Management application graphic accelerator table ------------------------------------------------------------------ ibmnetuGraphicTable OBJECT-TYPE SYNTAX SEQUENCE OF IbmnetuGraphicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A table of information mapping a slot and port to an interface table ifIndex. An entry exists in this table only if the ifConnectorPresent object is true" ::= { ibmnetuhardwareGeneral 2 } ibmnetuGraphicEntry OBJECT-TYPE SYNTAX IbmnetuGraphicEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry mapping slot and port to an interface table ifIndex." INDEX { ibmnetuGraphicSlotNum, ibmnetuGraphicPortNum } ::= { ibmnetuGraphicTable 1 } IbmnetuGraphicEntry ::= SEQUENCE { ibmnetuGraphicSlotNum INTEGER, ibmnetuGraphicPortNum INTEGER, ibmnetuGraphicifIndex INTEGER } ibmnetuGraphicSlotNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number identifying a slot location where an adapter can be inserted." ::= { ibmnetuGraphicEntry 1 } ibmnetuGraphicPortNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number identifying a port on a given adapter. A port implies a physical connector is associated with it." ::= { ibmnetuGraphicEntry 2 } ibmnetuGraphicifIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The ifIndex of the interface table entry associated with this port on an adapter. By definition, the ifEntry has ifConnectorPresent = true." ::= { ibmnetuGraphicEntry 3 } END