-- MIB created 12/11/98 18:26:10, by -- SMIC (the next generation) version 1.6.29, November 22, 1994. IBMESCONCUB-MIB DEFINITIONS ::= BEGIN -- From file: "ibmesconcub.mi2" -- Compile options "G A T M" IMPORTS enterprises, Counter32, Integer32, IpAddress FROM SNMPv2-SMI-v1 OBJECT-TYPE FROM RFC-1212 MacAddress FROM SNMPv2-TC-v1 ifIndex FROM RFC1213-MIB; ibmIROCescon OBJECT IDENTIFIER ::= { enterprises ibm(2) ibmProd(6) ibmIROC(119) ibmIROCrouting(4) 14 } -- MODULE-IDENTITY -- LastUpdated -- 9810221200Z -- OrgName -- IBM -- ContactInfo -- Randy Worzella -- IBM Corporation -- 800 Park Offices Drive -- V28A/664 -- P.O. Box 12195 -- Research Triangle Park, NC 27709, USA -- Tel: 1 919 254 2202 -- E-mail: worzella@us.ibm.com -- Descr -- MIB for managing activity on an ESCON channel from its -- secondary end. -- -- New capabilities provided by the ESCON adapter microcode -- required a change in table indexing. Therefore, this new -- MIB has been created and is based on the architecture -- MIB defined in ibmescon.txt. -- -- 'ESCON' is a trademark of the IBM Corporation. esconPortData OBJECT IDENTIFIER ::= { ibmIROCescon 1 } esconLinkData OBJECT IDENTIFIER ::= { ibmIROCescon 2 } esconStationData OBJECT IDENTIFIER ::= { ibmIROCescon 3 } esconConformance OBJECT IDENTIFIER ::= { ibmIROCescon 4 } esconPortTable OBJECT-TYPE SYNTAX SEQUENCE OF EsconPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of objects that describe an ESCON channel port." ::= { esconPortData 1 } esconPortEntry OBJECT-TYPE SYNTAX EsconPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of objects that describe an ESCON channel port. This table is indexed by ifIndex from MIB-II." INDEX { ifIndex } ::= { esconPortTable 1 } EsconPortEntry ::= SEQUENCE { esconPortInFiberStatus INTEGER, esconPortOutFiberStatus INTEGER } esconPortInFiberStatus OBJECT-TYPE SYNTAX INTEGER { inLoff(1), inOls(2), inIdle(3), inUnknown(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the fiber into this device from the host: inLoff = the light is off on the fiber into this device from the host inOls = the fiber into this device from the host is in an intermediate state between light-off and light-on inIdle = the fiber into this device from the host is in the light-on state, and is ready to transfer data from the host to this device inUnknown = the agent cannot determine the status of the fiber into this device from the host" ::= { esconPortEntry 1 } esconPortOutFiberStatus OBJECT-TYPE SYNTAX INTEGER { outDisableReq(1), outDisableForced(2), outLoffForced(3), outOls(4), outOlsForced(5), outEnable(6), outError(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the fiber out of this device to the host: outDisableReq = out disable obtained; the fiber out of this device into the host is not in the light-on state outDisableForced = out ESCON emits OLS; the fiber out of this device into the host is not in the light-on state outLoffForced = out ESCON forced light-off; the fiber out of this device into the host is not in the light-on state outOls = the fiber out of this device into the host is in an intermediate state between light-off and light-on outOlsforced = out ESCON forced OLS; the fiber out of this device into the host is not in the light-on state outEnable = the fiber out of this device into the host is in the light-on state, and is ready to transfer data from this device to the host outError = the status of the fiber out of this device to the host is none of those listed above. This is a state that should not occur" ::= { esconPortEntry 2 } esconLinkTable OBJECT-TYPE SYNTAX SEQUENCE OF EsconLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of objects that describe an ESCON channel link." ::= { esconLinkData 1 } esconLinkEntry OBJECT-TYPE SYNTAX EsconLinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of objects that describe an ESCON channel link. This table is indexed by ifIndex from MIB-II, by host link address, (host) control unit address, and by (host) partition number." INDEX { ifIndex, esconLinkHostLinkAddress, esconLinkControlUnitAddress, esconLinkPartitionNumber } ::= { esconLinkTable 1 } EsconLinkEntry ::= SEQUENCE { esconLinkHostLinkAddress OCTET STRING, esconLinkControlUnitAddress OCTET STRING, esconLinkPartitionNumber OCTET STRING, esconLinkStatus INTEGER } esconLinkHostLinkAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This address identifies the ESCON Director port to which the optical fiber between the ESCON Director and the host is attached." ::= { esconLinkEntry 1 } esconLinkControlUnitAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number identifying a logical control unit within an actual host." ::= { esconLinkEntry 2 } esconLinkPartitionNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number identifying a logical host within an actual host." ::= { esconLinkEntry 3 } esconLinkStatus OBJECT-TYPE SYNTAX INTEGER { hlpNotEstab(1), hlpEstab(2), hlpError(3) } ACCESS read-only STATUS mandatory DESCRIPTION "Gives the status of the link: hlpNotEstab = Host Logical Path not established hlpEstab = Host Logical Path established hlpError = Host Logical Path error" ::= { esconLinkEntry 4 } esconStationTable OBJECT-TYPE SYNTAX SEQUENCE OF EsconStationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of objects that describe an ESCON channel station." ::= { esconStationData 1 } esconStationEntry OBJECT-TYPE SYNTAX EsconStationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Table of objects that describe an ESCON channel station. This table is indexed by ifIndex from MIB-II, by host link address, by (host) control unit address, by (host) partition number, and by ESCON device address." INDEX { ifIndex, esconStationHostLinkAddress, esconStationControlUnitAddress, esconStationPartitionNumber, esconStationDeviceAddress } ::= { esconStationTable 1 } EsconStationEntry ::= SEQUENCE { esconStationHostLinkAddress OCTET STRING, esconStationControlUnitAddress OCTET STRING, esconStationPartitionNumber OCTET STRING, esconStationDeviceAddress OCTET STRING, esconStationState INTEGER, esconStationAttentionDelay INTEGER, esconStationAttentionTimeOut INTEGER, esconStationMaxBfru INTEGER, esconStationUnitSize INTEGER, esconStationMaxMsgSizeReceived INTEGER, esconStationMaxMsgSizeSent INTEGER, esconStationDataPacketsOkReceived Counter32, esconStationDataPacketsKoReceived Counter32, esconStationDataPacketsSent Counter32, esconStationTotalFramesSent Counter32, esconStationDataPacketsRetransmitted Counter32, esconStationPositiveAckDataPackets Counter32, esconStationSecondChanceAttentions Counter32, esconStationCommandsRetried Counter32 } esconStationHostLinkAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS not-accessible STATUS mandatory DESCRIPTION "This address identifies the ESCON Director port to which the optical fiber between the ESCON Director and the host is attached." ::= { esconStationEntry 1 } esconStationControlUnitAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number identifying a logical control unit within an actual host." ::= { esconStationEntry 2 } esconStationPartitionNumber OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS not-accessible STATUS mandatory DESCRIPTION "A number identifying a logical host within an actual host." ::= { esconStationEntry 3 } esconStationDeviceAddress OBJECT-TYPE SYNTAX OCTET STRING(SIZE(1)) ACCESS not-accessible STATUS mandatory DESCRIPTION "A unique hexadecimal number allocated to each station on the same host link." ::= { esconStationEntry 4 } esconStationState OBJECT-TYPE SYNTAX INTEGER { idle(1), cpDefined(2), cpReset(3), cpActive(4), cpDelete(5), cpAbend(6), cldpWait(7), cldpDefinedl(8), cldpError(9), cldpLoad(10), cldpDump(11), deletePending(12), deleted(13), cpXidExpected(14) } ACCESS read-only STATUS mandatory DESCRIPTION "The current state of the station." ::= { esconStationEntry 5 } esconStationAttentionDelay OBJECT-TYPE SYNTAX INTEGER(0..420) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the amount of time in seconds that elapses from the receipt of a packet at an ESCON station (when no other packets are queued) before that station sends buffered data to the Host. An update to this object takes effect the next time the station establishes communications with the host." ::= { esconStationEntry 6 } esconStationAttentionTimeOut OBJECT-TYPE SYNTAX INTEGER(10..840) -- Units -- seconds ACCESS read-write STATUS mandatory DESCRIPTION "Specifies the amount of time in seconds that the station is to wait for a response to an attention signal it sent to the host before initiating channel disconnect. An update to this object takes effect the next time the station establishes communications with the host." ::= { esconStationEntry 7 } esconStationMaxBfru OBJECT-TYPE SYNTAX INTEGER(1..65535) ACCESS read-only STATUS mandatory DESCRIPTION "Number of buffers in the host buffer pool for receiving data from this station." ::= { esconStationEntry 8 } esconStationUnitSize OBJECT-TYPE SYNTAX INTEGER(64..4000) -- Units -- bytes ACCESS read-only STATUS mandatory DESCRIPTION "Maximum size of a buffer, in bytes, that the host can receive from this station." ::= { esconStationEntry 9 } esconStationMaxMsgSizeReceived OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length of a message that can be received on this station. An update to this object takes effect the next time the station establishes communications with the host." ::= { esconStationEntry 10 } esconStationMaxMsgSizeSent OBJECT-TYPE SYNTAX INTEGER(0..65535) ACCESS read-write STATUS mandatory DESCRIPTION "The maximum length of a message that can be sent from this station to the host. An update to this object takes effect the next time the station establishes communications with the host." ::= { esconStationEntry 11 } esconStationDataPacketsOkReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of data packets received from the host by this station without Data Check." ::= { esconStationEntry 12 } esconStationDataPacketsKoReceived OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of data packets received from the host by this station with Data Check." ::= { esconStationEntry 13 } esconStationDataPacketsSent OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of data packets sent to the host by this station." ::= { esconStationEntry 14 } esconStationTotalFramesSent OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of data packets and control packets sent to the host by this station." ::= { esconStationEntry 15 } esconStationDataPacketsRetransmitted OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of data packets retransmitted by this station" ::= { esconStationEntry 16 } esconStationPositiveAckDataPackets OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of data packets sent by this station to the host that the host has positively acknowledged. When the host sends a positive acknowledgement for a group of n data packets, this counter is incremented by n." ::= { esconStationEntry 17 } esconStationSecondChanceAttentions OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times this station has sent a Second Chance Attention signal to the host." ::= { esconStationEntry 18 } esconStationCommandsRetried OBJECT-TYPE SYNTAX Counter32 ACCESS read-only STATUS mandatory DESCRIPTION "The number of times a command has been retried on this station" ::= { esconStationEntry 19 } END