HP-VLAN DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, enterprises, Integer32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DisplayString, PhysAddress, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB; hp OBJECT IDENTIFIER ::= { enterprises 11 } nm OBJECT IDENTIFIER ::= { hp 2 } icf OBJECT IDENTIFIER ::= { nm 14 } hpicfObjects OBJECT IDENTIFIER ::= { icf 11 } hpicfSwitch OBJECT IDENTIFIER ::= { hpicfObjects 5 } hpSwitch OBJECT IDENTIFIER ::= { hpicfSwitch 1 } hpVLAN OBJECT IDENTIFIER ::= { hpSwitch 3 } hpVlanLevelOne MODULE-IDENTITY LAST-UPDATED "9510200000Z" ORGANIZATION "Hewlett Packard Company, Workgroup Networks Division" CONTACT-INFO "Hewlett Packard Company 8000 Foothills Blvd. Roseville, CA 95747" DESCRIPTION "This MIB module describes management objects used to model virtual LANs (VLANs)." ::= { hpVLAN 1 } hpVlanObjects OBJECT IDENTIFIER ::= { hpVlanLevelOne 1 } hpVlanTraps OBJECT IDENTIFIER ::= { hpVlanLevelOne 2 } hpVlanConformance OBJECT IDENTIFIER ::= { hpVlanLevelOne 3 } VlanID ::= TEXTUAL-CONVENTION DISPLAY-HINT "d" STATUS current DESCRIPTION "A unique value, greater than zero, for each VLAN in the managed system. It is recommended that values are assigned contiguously starting from 1." SYNTAX Integer32 (1..65535) ConfigStatus ::= INTEGER { active(1), notInService(2), notReady(3) } hpVlanNumber OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently defined VLANs in the device. Though VLANs should be created using contiguous VLAN IDs, this is not mandatory. Gaps in the VLAN ID sequence may also result from the deletion of existing VLANs. Therefore, this value represents the total number of VLANs in the device and should not be used to indicate the highest VLAN ID value currently in use." ::= { hpVlanObjects 1 } -- HP VLAN Identification Objects hpVlanIdentTable OBJECT-TYPE SYNTAX SEQUENCE OF HpVlanIdentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the various VLANs that are currently defined for this device." ::= { hpVlanObjects 4 } hpVlanIdentEntry OBJECT-TYPE SYNTAX HpVlanIdentEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the hpVlanIdentTable containing the general VLAN information." INDEX { hpVlanIdentIndex } ::= { hpVlanIdentTable 1 } HpVlanIdentEntry ::= SEQUENCE { hpVlanIdentIndex VlanID, hpVlanIdentName DisplayString, hpVlanIdentMode INTEGER, hpVlanIdentStatus RowStatus, hpVlanDot1QID Integer32, hpVlanIdentState INTEGER } hpVlanIdentIndex OBJECT-TYPE SYNTAX VlanID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID which uniquely identifies a row in this table." ::= { hpVlanIdentEntry 1 } hpVlanIdentName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-create STATUS current DESCRIPTION "The user defined textual name that is associated with this VLAN." ::= { hpVlanIdentEntry 2 } hpVlanIdentMode OBJECT-TYPE SYNTAX INTEGER { port(1), mac(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mode of this VLAN. A VLAN can be either port-based or MAC address-based. A port-based VLAN supports a multiple addresses per VLAN port. A MAC address- based VLAN supports multiple MAC addresses per port such that VLAN address tables must be consulted to determine the number of VLAN clients." ::= { hpVlanIdentEntry 3 } hpVlanIdentStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The status of a VLAN information entry." ::= { hpVlanIdentEntry 4 } hpVlanDot1QID OBJECT-TYPE SYNTAX Integer32 (1..4095) MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN tag ID. 802.1Q" ::= { hpVlanIdentEntry 5} hpVlanIdentState OBJECT-TYPE SYNTAX INTEGER { up(1), down(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current state of the VLAN. If one port in the VLAN is up, then that VLAN is up, otherwise it is down." ::= { hpVlanIdentEntry 6 } -- HP VLAN Membership Tables (Member and Address Tables) hpVlanMemberTable OBJECT-TYPE SYNTAX SEQUENCE OF HpVlanMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the members of the various VLANs that are currently defined for this device. Interfaces can be associated with a pre-defined VLAN (i.e., VLANs can be created by grouping existing interfaces) by adding rows to this table. Likewise, deleting rows from this table removes the specified interface from the VLAN. Note that certain entries in this table will automatically be created when a VLAN is created, such as the entry associating a VLAN with its propVirtual interface to the management and/or forwarding entity on the device. These entries are read-only and can not be manipulated via the MIB." ::= { hpVlanObjects 5 } hpVlanMemberEntry OBJECT-TYPE SYNTAX HpVlanMemberEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the hpVlanMemberTable containing the VLAN ID to Interface Group ifIndex mappings." INDEX { hpVlanMemberIfIndex } ::= { hpVlanMemberTable 1 } HpVlanMemberEntry ::= SEQUENCE { hpVlanMemberIfIndex InterfaceIndex, hpVlanMemberIndex VlanID } hpVlanMemberIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ifIndex value which uniquely identifies a row in the Interfaces Table. The corresponding row in the Interfaces Table must exist prior to the index being used in this table." ::= { hpVlanMemberEntry 1 } hpVlanMemberIndex OBJECT-TYPE SYNTAX VlanID MAX-ACCESS read-create STATUS current DESCRIPTION "The VLAN ID identifies the VLAN the interface is in. The corresponding row in the VLAN Ident Table must exist prior to the index being used in this table." ::= { hpVlanMemberEntry 2 } hpVlanAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF HpVlanAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the MAC addresses that are currently associated with a specific VLAN. Entries are added to and deleted from this read-only table automatically as they are learned from the network." ::= { hpVlanObjects 6 } hpVlanAddrEntry OBJECT-TYPE SYNTAX HpVlanAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the hpVlanAddrTable containing the VLAN ID to MAC address mappings." INDEX { hpVlanAddrIndex } ::= { hpVlanAddrTable 1 } HpVlanAddrEntry ::= SEQUENCE { hpVlanAddrIndex VlanID, hpVlanAddrPhysAddress PhysAddress } hpVlanAddrIndex OBJECT-TYPE SYNTAX VlanID MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN ID which uniquely identifies a row in the VLAN Ident Table. The corresponding row in the VLAN Ident Table must exist prior to the index being present in this table." ::= { hpVlanAddrEntry 1 } hpVlanAddrPhysAddress OBJECT-TYPE SYNTAX PhysAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address of a node that is associated with a specific VLAN as identified by the object hpVlanAddrIndex." ::= { hpVlanAddrEntry 2 } hpVlanIdentConfigStatus OBJECT-TYPE SYNTAX ConfigStatus MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The status of a VLAN information table. If one or more variables in this group were reconfigurated since last reboot and required reboot to take effect, the value of this variable will be set to notInService." ::= { hpVlanObjects 7 } -- HP VLAN Tagging Membership table (supercedes hpVlanMemberTable) hpVlanMemberTable2 OBJECT-TYPE SYNTAX SEQUENCE OF HpVlanMemberEntry2 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table describing the VLANs on each particular port along with tagging information." ::= { hpVlanObjects 8 } hpVlanMemberEntry2 OBJECT-TYPE SYNTAX HpVlanMemberEntry2 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The row in the hpVlanMemberTable2 containing the VLAN ID to interface group ifIndex mappings as well the VLAN tagging information." INDEX { hpVlanIdentIndex, hpVlanMemberIfIndex } ::= { hpVlanMemberTable2 1} HpVlanMemberEntry2 ::= SEQUENCE { hpVlanMemberTagged2 INTEGER } hpVlanMemberTagged2 OBJECT-TYPE SYNTAX INTEGER { tagged(1), untagged(2), no(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "Identifies whether the particular VLan on this port is tagged or not. 'no' denotes not a member of that vlan." ::= { hpVlanMemberEntry2 1} -- HP VLAN Conformance Information hpVlanGroups OBJECT IDENTIFIER ::= { hpVlanConformance 1 } hpVlanCompliances OBJECT IDENTIFIER ::= { hpVlanConformance 2 } -- HP VLAN Compliance Statements hpVlanCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for HP devices supporting the HP VLAN MIB." MODULE MANDATORY-GROUPS { hpVlanGeneralGroup } GROUP hpVlanAddressGroup DESCRIPTION "This group is current for all devices that maintain MAC address tables, based on VLAN association, that are accessible by network management (e.g., SNMP) entities." ::= { hpVlanCompliances 1} -- HP VLAN Conformance Groups hpVlanGeneralGroup OBJECT-GROUP OBJECTS { hpVlanNumber, hpVlanIdentMode, hpVlanIdentName, hpVlanIdentStatus } STATUS current DESCRIPTION "A collection of objects that provide general information about a configured VLAN. The organization of this group is such that it is assumed that all devices supporting VLANs associate an RFC 1573 interface with a VLAN even if only to allow default node-to-VLAN assignment." ::= { hpVlanGroups 1 } hpVlanAddressGroup OBJECT-GROUP OBJECTS { hpVlanAddrPhysAddress } STATUS current DESCRIPTION "A collection of objects that contain VLAN to MAC address mapping data." ::= { hpVlanGroups 2 } END