LOAD-BAL-SYSTEM-MIB DEFINITIONS ::= BEGIN
--================================================================
--  LOAD-BAL-SYSTEM-MIB
--    A private enterprise mib for ip load balancing systems.
--================================================================

IMPORTS
	enterprises, Counter, IpAddress, TimeTicks
		FROM RFC1155-SMI
	OBJECT-TYPE
		FROM RFC-1212
	TRAP-TYPE
	FROM RFC-1215;

-- numerical definitions:
f5		OBJECT IDENTIFIER ::= { enterprises 3375 }
f5systems	OBJECT IDENTIFIER ::= { f5 1 }
loadbal		OBJECT IDENTIFIER ::= { f5systems 1 }

--globals		OBJECT IDENTIFIER ::= { loadbal 1 }
virtualAddress	OBJECT IDENTIFIER ::= { loadbal 2 }
virtualServer	OBJECT IDENTIFIER ::= { loadbal 3 }
snat		OBJECT IDENTIFIER ::= { loadbal 4 }
interface	OBJECT IDENTIFIER ::= { loadbal 5 }
ifaddress	OBJECT IDENTIFIER ::= { loadbal 6 }
pool		OBJECT IDENTIFIER ::= { loadbal 7 }
poolMember	OBJECT IDENTIFIER ::= { loadbal 8 }

-- Old groups
vaddress	OBJECT IDENTIFIER ::= { loadbal 100 }
ndaddr		OBJECT IDENTIFIER ::= { loadbal 101 }
nat		OBJECT IDENTIFIER ::= { loadbal 102 }
vport		OBJECT IDENTIFIER ::= { loadbal 103 }
member		OBJECT IDENTIFIER ::= { loadbal 104 }

loadBalTrap       OBJECT IDENTIFIER ::= { loadbal 110 }
loadBalTraps      OBJECT IDENTIFIER ::= { loadBalTrap 2 }

DisplayString ::= OCTET STRING 

--================================================================
-- Interfaces 
--================================================================

interfaceNumber OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of interfaces on this BIG/ip."
	::= { interface 1 }

interfaceTable OBJECT-TYPE
	SYNTAX SEQUENCE OF InterfaceEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table containing information about the BIG/ip intefaces."
	::= { interface 2 }

interfaceEntry OBJECT-TYPE
	SYNTAX InterfaceEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Columns in the Interface Table."
	INDEX { interfaceName }
	::= { interfaceTable 1 }

InterfaceEntry ::=
	SEQUENCE {
		interfaceName			DisplayString (SIZE (0..8)),
		interfaceIpAddresses		DisplayString (SIZE (0..255)),
		interfaceDestination		INTEGER,
		interfaceSource			INTEGER,
		interfaceTimeout		INTEGER,
		interfaceArmed			INTEGER,
		interfaceVLANSEnabled		INTEGER,
		interfaceMasqueradeAddress	DisplayString (SIZE (0..255)),
		interfaceLastTimeChanged	INTEGER,
		interfaceSpeed			INTEGER,
		interfaceFullDuplex		INTEGER
	}

interfaceName OBJECT-TYPE
	SYNTAX 	DisplayString (SIZE (0..8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The name of the interface."
	::= { interfaceEntry 1 }

interfaceIpAddresses OBJECT-TYPE
	SYNTAX 	DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The list of IP addresses on this interface."
	::= { interfaceEntry 2 }

interfaceDestination OBJECT-TYPE
	SYNTAX 	INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"This is a destination interface."
	::= { interfaceEntry 3 }

interfaceSource OBJECT-TYPE
	SYNTAX 	INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"This is a source interface."
	::= { interfaceEntry 4 }

interfaceTimeout OBJECT-TYPE
	SYNTAX 	INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The seconds before a failover is triggered in failsafe mode."
	::= { interfaceEntry 5 }

interfaceArmed OBJECT-TYPE
	SYNTAX 	INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The interface will be armed if the interface failsafe mode is activated."
	::= { interfaceEntry 6 }

interfaceVLANSEnabled OBJECT-TYPE
	SYNTAX 	INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is VLANS enabled for this interface."
	::= { interfaceEntry 7 }

interfaceMasqueradeAddress OBJECT-TYPE
	SYNTAX 	DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"MAC masquerade address of this interface."
	::= { interfaceEntry 8 }

interfaceLastTimeChanged OBJECT-TYPE
	SYNTAX 	INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The last time the interface attributes were modified."
	::= { interfaceEntry 9 }

interfaceSpeed OBJECT-TYPE
	SYNTAX 	INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The speed of this interface."
	::= { interfaceEntry 10 }

interfaceFullDuplex OBJECT-TYPE
	SYNTAX 	INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this interface operating in full duplex mode."
	::= { interfaceEntry 11 }

--================================================================
--  interface ip addresses 
--================================================================

ifaddressNumber OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of interface ip addresses on this BIG/ip."
	::= { ifaddress 1 }

ifaddressTable OBJECT-TYPE
	SYNTAX SEQUENCE OF IfaddressEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table containing information about the BIG/ip interface ip addresses."
	::= { ifaddress 2 }

ifaddressEntry OBJECT-TYPE
	SYNTAX IfaddressEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Columns in the Interface Table."
	INDEX { ifaddressIpAddress }
	::= { ifaddressTable 1 }

IfaddressEntry ::=
	SEQUENCE {
		ifaddressIpAddress		IpAddress,
		ifaddressInterfaceName		DisplayString (SIZE (0..255)),
		ifaddressNetmask		IpAddress,
		ifaddressBroadcast		IpAddress,
		ifaddressType			INTEGER,
		ifaddressUnitId			INTEGER,
		ifaddressVLANTag	        DisplayString (SIZE (0..5))
	}

ifaddressIpAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The ip address for this interface ip address."
	::= { ifaddressEntry 1 }

ifaddressInterfaceName OBJECT-TYPE
	SYNTAX 	DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The name of the interface for this ip address."
	::= { ifaddressEntry 2 }

ifaddressNetmask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The netmask for this interface ip address."
	::= { ifaddressEntry 3 }

ifaddressBroadcast OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The broadcast address for this interface ip address."
	::= { ifaddressEntry 4 }

ifaddressType OBJECT-TYPE
	SYNTAX INTEGER {
		iptrue(1),
		ipshared(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The type for this interface ip address."
	::= { ifaddressEntry 5 }

ifaddressUnitId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The unit id for this interface ip address."
	::= { ifaddressEntry 6 }

ifaddressVLANTag OBJECT-TYPE
	SYNTAX 	DisplayString (SIZE (0..5))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The VLAN tag for this interface ip address."
	::= { ifaddressEntry 7 }

--================================================================
--  Pools
--================================================================

poolNumber OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of pools on this BIG/ip."
	::= { pool 1 }

poolTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PoolEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table containing information about the BIG/ip pools."
	::= { pool 2 }

poolEntry OBJECT-TYPE
	SYNTAX PoolEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Columns in the Pool Table."
	INDEX { poolName }
	::= { poolTable 1 }

PoolEntry ::=
	SEQUENCE {
		poolName		DisplayString (SIZE (0..255)),
		poolLBMode		INTEGER,
		poolDependent		INTEGER,
		poolMemberQty		INTEGER,
		poolBitsin		Counter,
		poolBitsout		Counter,
		poolBitsinHi32		Counter,
		poolBitsoutHi32		Counter,
		poolPktsin		Counter,
		poolPktsout		Counter,
		poolPktsinHi32		Counter,
		poolPktsoutHi32		Counter,
		poolMaxConn		INTEGER (0..65535),
		poolCurrentConn		INTEGER (0..65535),
		poolTotalConn		Counter
	}

poolName OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The name of this pool."
	::= { poolEntry 1 }

poolLBMode OBJECT-TYPE
	SYNTAX INTEGER {
		roundrobin(1),
		ratio(2),
		fastest(3),
		leastConn(4),
		predictive(5),
		observed(6),
		priority(7),
		ratioNodeAddress(8),
		priorityNodeAddress(9),
		leastConnNodeAddress(10),
		globalDefault(11)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The load balance mode of this pool."
	::= { poolEntry 2 }

poolDependent OBJECT-TYPE
	SYNTAX INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this pool a dependent pool."
	::= { poolEntry 3 }

poolMemberQty OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of members in this pool."
	::= { poolEntry 4 }

poolBitsin OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this pool."
	::= { poolEntry 5 }

poolBitsout OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this pool."
	::= { poolEntry 6 }

poolBitsinHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this pool."
	::= { poolEntry 7 }

poolBitsoutHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this pool."
	::= { poolEntry 8 }

poolPktsin OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this pool."
	::= { poolEntry 9 }

poolPktsout OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this pool."
	::= { poolEntry 10 }

poolPktsinHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this pool."
	::= { poolEntry 11 }

poolPktsoutHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this pool."
	::= { poolEntry 12 }

poolMaxConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections the members of  
		this pool have had open at any one time."
	::= { poolEntry 13 }

poolCurrentConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current number of connections the members of  
		this pool have open."
	::= { poolEntry 14 }

poolTotalConn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections the members of 
		this pool have served since the pool started."
	::= { poolEntry 15 }

--================================================================
--  Pool Members
--================================================================

poolMemberNumber OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of pool members on this BIG/ip."
	::= { poolMember 1 }

poolMemberTable OBJECT-TYPE
	SYNTAX SEQUENCE OF PoolMemberEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table containing information about the BIG/ip pool members."
	::= { poolMember 2 }

poolMemberEntry OBJECT-TYPE
	SYNTAX PoolMemberEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Columns in the Pool Member Table."
	INDEX { poolMemberPoolName, poolMemberIpAddress, poolMemberPort }
	::= { poolMemberTable 1 }

PoolMemberEntry ::=
	SEQUENCE {
		poolMemberPoolName		DisplayString (SIZE (0..255)),
		poolMemberIpAddress		IpAddress,
		poolMemberPort			INTEGER,
		poolMemberMaintenance		INTEGER,
		poolMemberRatio			INTEGER,
		poolMemberPriority		INTEGER,
		poolMemberWeight		INTEGER,
		poolMemberRipeness		INTEGER,
		poolMemberBitsin		Counter,
		poolMemberBitsout		Counter,
		poolMemberBitsinHi32		Counter,
		poolMemberBitsoutHi32		Counter,
		poolMemberPktsin		Counter,
		poolMemberPktsout		Counter,
		poolMemberPktsinHi32		Counter,
		poolMemberPktsoutHi32		Counter,
		poolMemberConnLimit		INTEGER (0..65535),
		poolMemberMaxConn		INTEGER (0..65535),
		poolMemberCurrentConn		INTEGER (0..65535),
		poolMemberTotalConn		Counter
	}

poolMemberPoolName OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The name of the pool which contains this member."
	::= { poolMemberEntry 1 }

poolMemberIpAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The ip address of this pool member."
	::= { poolMemberEntry 2 }

poolMemberPort OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The port of this pool member."
	::= { poolMemberEntry 3 }

poolMemberMaintenance OBJECT-TYPE
	SYNTAX INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this pool member in maintenance mode."
	::= { poolMemberEntry 4 }

poolMemberRatio OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Load balancing ratio of the member within the pool. 
		Used by member ratio load balancing mode."
	::= { poolMemberEntry 5 }

poolMemberPriority OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Priority level of the member within the pool.
		Used by priority member load balancing mode."
	::= { poolMemberEntry 6 }

poolMemberWeight OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Weight of the member within the pool.
		Used during dynamically calculated ratio 
		load balancing."
	::= { poolMemberEntry 7 }

poolMemberRipeness OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current load balancing state in member
		ratio load balancing mode."
	::= { poolMemberEntry 8 }

poolMemberBitsin OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this pool member."
	::= { poolMemberEntry 9 }

poolMemberBitsout OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this pool member."
	::= { poolMemberEntry 10 }

poolMemberBitsinHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this pool member."
	::= { poolMemberEntry 11 }

poolMemberBitsoutHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this pool member."
	::= { poolMemberEntry 12 }

poolMemberPktsin OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this pool member."
	::= { poolMemberEntry 13 }

poolMemberPktsout OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this pool member."
	::= { poolMemberEntry 14 }

poolMemberPktsinHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this pool member."
	::= { poolMemberEntry 15 }

poolMemberPktsoutHi32 OBJECT-TYPE
	SYNTAX 	Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this pool member."
	::= { poolMemberEntry 16 }

poolMemberConnLimit OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this pool
		member can have open at any one time."
	::= { poolMemberEntry 17 }

poolMemberMaxConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this pool
		member has had open at any one time."
	::= { poolMemberEntry 18 }

poolMemberCurrentConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current number of connections this pool
		member has open."
	::= { poolMemberEntry 19 }

poolMemberTotalConn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this pool
		 member have served since the pool member started."
	::= { poolMemberEntry 20 }


--================================================================
-- Virtual Addresses
--================================================================

virtualAddressNumber OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of virtual addresses on this BIG/ip."
	::= { virtualAddress 1 }

virtualAddressTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VirtualAddressEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table containing information about the BIG/ip
		Virtual Server addresses."
	::= { virtualAddress 2 }

virtualAddressEntry OBJECT-TYPE
	SYNTAX VirtualAddressEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Columns in the Virtual Address Table."
	INDEX { virtualAddressIpAddress }
	::= { virtualAddressTable 1 }

VirtualAddressEntry ::=
	SEQUENCE {
		virtualAddressIpAddress		IpAddress,
		virtualAddressStatus		INTEGER,
		virtualAddressConnLimit		INTEGER (0..65535),
		virtualAddressNetmask		IpAddress,
		virtualAddressBroadcast		IpAddress,
		virtualAddressInterface		DisplayString (SIZE (0..8)),
		virtualAddressFailoverFlags	INTEGER,
		virtualAddressOctetsIn		Counter,
		virtualAddressOctetsOut		Counter,
		virtualAddressPacketsIn		Counter,
		virtualAddressPacketsOut	Counter,
		virtualAddressCurrentConn	INTEGER (0..65535),
		virtualAddressMaxConn		INTEGER (0..65535),
		virtualAddressTotalConn		Counter,
		virtualAddressOctetsInHi32	Counter,
		virtualAddressOctetsOutHi32	Counter,
		virtualAddressPacketsInHi32	Counter,
		virtualAddressPacketsOutHi32	Counter,
		virtualAddressUnitId		INTEGER
	}

virtualAddressIpAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The ip address for this virtual server."
	::= { virtualAddressEntry 1 }

virtualAddressStatus OBJECT-TYPE
	SYNTAX INTEGER {
		ready(1),
		maintainance(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this server in maintainance mode?"
	::= { virtualAddressEntry 2 }

virtualAddressConnLimit OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this virtual address
		can support at one time."
	::= { virtualAddressEntry 3 }

virtualAddressNetmask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The netmask for this virtual address."
	::= { virtualAddressEntry 4 }

virtualAddressBroadcast OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The broadcast address for this virtual address."
	::= { virtualAddressEntry 5 }

virtualAddressInterface OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..8))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The name of the network interface that this address
		is attached to."
	::= { virtualAddressEntry 6 }

virtualAddressFailoverFlags OBJECT-TYPE
	SYNTAX INTEGER {
		mirrorconnections(1),
		mirrorpersistence(2),
		mirrorconnectionspersistence(3),
		nomirroring(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The failover flags for the this virtual address.
		The virtualAddressFailoverFlag is no longer relevant. Mirroring
		is controlled through the virtualServerFailoverFlag."
	::= { virtualAddressEntry 7 }

virtualAddressOctetsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets received from the network from
		this virtual server."
	::= { virtualAddressEntry 8 }

virtualAddressOctetsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets sent to the network from this
		virtual server."
	::= { virtualAddressEntry 9 }

virtualAddressPacketsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets received from the network from
		this virtual server."
	::= { virtualAddressEntry 10 }

virtualAddressPacketsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets sent to the network from this
		virtual	server."
	::= { virtualAddressEntry 11 }

virtualAddressCurrentConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of connections currently open on this
		virtual server."
	::= { virtualAddressEntry 12 }

virtualAddressMaxConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this virtual server
		has had open at any one time."
	::= { virtualAddressEntry 13 }

virtualAddressTotalConn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this virtual server
		has served since the server started."
	::= { virtualAddressEntry 14 }

virtualAddressOctetsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets received from the network from
		this virtual server."
	::= { virtualAddressEntry 15 }

virtualAddressOctetsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets sent to the network from this
		virtual server."
	::= { virtualAddressEntry 16 }

virtualAddressPacketsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets received from the network from
		this virtual server."
	::= { virtualAddressEntry 17 }

virtualAddressPacketsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets sent to the network from this
		virtual	server."
	::= { virtualAddressEntry 18 }

virtualAddressUnitId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The unit id of this virtual server."
	::= { virtualAddressEntry 19 }

--================================================================
--Virtual Servers
--================================================================

virtualServerNumber OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of virtual servers on this BIG/ip."
	::= { virtualServer 1 }

virtualServerTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VirtualServerEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table containing BIG/ip Virtual server information."
	::= { virtualServer 2 }

virtualServerEntry OBJECT-TYPE
	SYNTAX VirtualServerEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Columns in the Virtual Server table."
	INDEX { virtualServerIpAddress,virtualServerPort }
	::= { virtualServerTable 1 }

VirtualServerEntry ::=
	SEQUENCE {
		virtualServerIpAddress		IpAddress,
		virtualServerPort		INTEGER (0..65535),
		virtualServerStatus		INTEGER,
		virtualServerConnLimit		INTEGER (0..65535),
		virtualServerAppProtocol	INTEGER,
		virtualServerAppProtocolTimeout INTEGER (0..65535),
		virtualServerAppProtocolReaper	INTEGER (0..65535),
		virtualServerPersistTimeout	INTEGER,
		virtualServerPersistMask	IpAddress,
		virtualServerSticky		INTEGER,
		virtualServerStickyMask		IpAddress,
		virtualServerFailoverFlags	INTEGER,
		virtualServerOctetsIn		Counter,
		virtualServerOctetsOut		Counter,
		virtualServerPacketsIn		Counter,
		virtualServerPacketsOut		Counter,
		virtualServerCurrentConn	INTEGER (0..65535),
		virtualServerMaxConn		INTEGER (0..65535),
		virtualServerTotalConn		Counter,
		virtualServerSslNew		Counter,
		virtualServerSslHits		Counter,
		virtualServerSslTimeouts	Counter,
		virtualServerSslMisses		Counter,
		virtualServerOctetsInHi32  	Counter,
		virtualServerOctetsOutHi32	Counter,
		virtualServerPacketsInHi32	Counter,
		virtualServerPacketsOutHi32	Counter,
		virtualServerCookieMethod	INTEGER,
		virtualServerRule		DisplayString (SIZE (0..255)),
		virtualServerPool		DisplayString (SIZE (0..255))
	}

virtualServerIpAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The ip address for this virtual server."
	::= { virtualServerEntry 1}

virtualServerPort OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The port for this virtual server."
	::= { virtualServerEntry 2 }

virtualServerStatus OBJECT-TYPE
	SYNTAX INTEGER {
		ready(1),
		maintainance(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this server in maintainance mode?"
	::= { virtualServerEntry 3 }

virtualServerConnLimit OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this virtual server can
		support at one time."
	::= { virtualServerEntry 4 }

virtualServerAppProtocol OBJECT-TYPE
	SYNTAX INTEGER {
		none (1),
		ssl (2),
		cookie(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The application tunnelling protocol this virtual server
		uses."
	::= { virtualServerEntry 5 }

virtualServerAppProtocolTimeout OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The timeout for persistence timeout for this this
		application protocol session."
	::= { virtualServerEntry 6 }

virtualServerAppProtocolReaper OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The amount of idle time before we reap an application 
		protocol session."
	::= { virtualServerEntry 7 }

virtualServerPersistTimeout OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The timeout for persistence on this connection."
	::= { virtualServerEntry 8 }

virtualServerPersistMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The IP addresses matching this mask will have persistent
		connections. Those not covered by this mask will not."
	::= { virtualServerEntry 9 }

virtualServerSticky OBJECT-TYPE
	SYNTAX INTEGER {
		true (1),
	false (2) }
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is Destination Address Affinity turned on for this
		connection?" 
	::= { virtualServerEntry 10 }

virtualServerStickyMask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The addresses matching this mask will have Destination
		Address Affinity if virtualServerSticky is true."
	::= { virtualServerEntry 11 }

virtualServerFailoverFlags OBJECT-TYPE
	SYNTAX INTEGER {
		mirrorconnections(1),
		mirrorpersistence(2),
		mirrorconnectionspersistence(3),
		nomirroring(4)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The failover flags for the this virtual server."
	::= { virtualServerEntry 12 }

virtualServerOctetsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets received from the network from this
		virtual server."
	::= { virtualServerEntry 13 }

virtualServerOctetsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets sent to the network from this virtual
		server."
	::= { virtualServerEntry 14 }

virtualServerPacketsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets received from the network from this
		virtual server."
	::= { virtualServerEntry 15 }

virtualServerPacketsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets sent to the network from this virtual
		server."
	::= { virtualServerEntry 16 }

virtualServerCurrentConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of connections currently open on this virtual
		server."
	::= { virtualServerEntry 17 }

virtualServerMaxConn OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this virtual server has had 
		open at any one time."
	::= { virtualServerEntry 18 }

virtualServerTotalConn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this virtual server has
		served since the server started."
	::= { virtualServerEntry 19 }

virtualServerSslNew OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of new SSL sessions on this virtual server."
	::= { virtualServerEntry 20 }

virtualServerSslHits OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of lookup successes in the SSL session id
		cache for valid session ids."
	::= { virtualServerEntry 21 }

virtualServerSslTimeouts OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of lookup successes in the SSL session id
		cache for session ids that have already been reaped."
	::= { virtualServerEntry 22 }

virtualServerSslMisses OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of lookup failures in the SSL session id
		cache."
	::= { virtualServerEntry 23 }

virtualServerOctetsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets received from the network from this
		virtual server."
	::= { virtualServerEntry 24 }

virtualServerOctetsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of octets sent to the network from this virtual
		server."
	::= { virtualServerEntry 25 }

virtualServerPacketsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets received from the network from this
		virtual server."
	::= { virtualServerEntry 26 }

virtualServerPacketsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of packets sent to the network from this virtual
		server."
	::= { virtualServerEntry 27 }

virtualServerCookieMethod OBJECT-TYPE
	SYNTAX INTEGER {
		insert(1),
		rewrite(2),
		passive(3)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The cookie persistence method for this virtual server."
	::= { virtualServerEntry 28 }

virtualServerRule OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The load balancing rule used by this virtual server."
	::= { virtualServerEntry 29 }

virtualServerPool OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The load balancing pool used by this virtual server
		if a load balancing rule is not defined."
	::= { virtualServerEntry 30 }

--================================================================
-- SNAT Translation Address Table
--================================================================

snatTransTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SnatTransEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table of all the secure NATS entries."
	::= { snat 1 }

snatTransEntry OBJECT-TYPE
	SYNTAX SnatTransEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION "Columns in the table of secure NATS entries."
	INDEX { snatTransAddr }
	::= { snatTransTable 1 }

SnatTransEntry ::= SEQUENCE {
	snatTransEnabled		INTEGER,
	snatTransAddr			IpAddress,
	snatTransIface			DisplayString,
	snatTransNetmask		IpAddress,
	snatTransBroadcast		IpAddress,
	snatTransSecsCollectingStats	Counter,
	snatTransBitsIn			Counter,
	snatTransBitsOut		Counter,
	snatTransPktsIn			Counter,
	snatTransPktsOut		Counter,
	snatTransCurrConns		INTEGER,
	snatTransMaxConns		INTEGER,
	snatTransTotalConns		Counter,
	snatTransBitsInHi32		Counter,
	snatTransBitsOutHi32		Counter,
	snatTransPktsInHi32		Counter,
	snatTransPktsOutHi32		Counter,
	snatTransLastTransPort		INTEGER,
	snatTransUnitId			INTEGER
}
	
snatTransEnabled OBJECT-TYPE
	SYNTAX 	INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this TransAddress enabled for SNAT?"
	::= { snatTransEntry 1 }

snatTransAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The ipaddress to the outside world for this SNAT."
	::= { snatTransEntry 2 }
	
snatTransIface OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..10))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The name of the interface that this trans address
		 exists on."
	::= { snatTransEntry 3 }

snatTransNetmask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The network mask for the snatTransAddr."
	::= { snatTransEntry 4 }

snatTransBroadcast OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The broadcast address for the snatTransAddr."
	::= { snatTransEntry 5 }

snatTransSecsCollectingStats OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of seconds we have been collecting
		 statistics for this port."
	::= { snatTransEntry 6 }

snatTransBitsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total bits in for this SNAT."
	::= { snatTransEntry 7 }

snatTransBitsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total bits out for this SNAT."
	::= { snatTransEntry 8 }

snatTransPktsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total packets in for this SNAT."
	::= { snatTransEntry 9 }

snatTransPktsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total packets out for this SNAT."
	::= { snatTransEntry 10 }

snatTransCurrConns OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The number of connections currently open for
		this SNAT."
	::= { snatTransEntry 11 }

snatTransMaxConns OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of connections this SNAT
		has had open at any one time."
	::= { snatTransEntry 12 }

snatTransTotalConns OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of connections this SNAT
		has had since the SNAT started."
	::= { snatTransEntry 13 }

snatTransBitsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of bits in for this SNAT."
	::= { snatTransEntry 14 }

snatTransBitsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of bits out for this SNAT."
	::= { snatTransEntry 15 }

snatTransPktsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of packets in for this SNAT."
	::= { snatTransEntry 16 }

snatTransPktsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of packets out for this SNAT."
	::= { snatTransEntry 17 }

snatTransLastTransPort OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Last translated port accessed using the SNAT."
	::= { snatTransEntry 18 }

snatTransUnitId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Unit number of the load balancer to which 
		the SNAT translation address is assigned."
	::= { snatTransEntry 19 }

--================================================================
-- SNAT Original Address Table
--================================================================

snatOrigTable OBJECT-TYPE
	SYNTAX SEQUENCE OF SnatOrigEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table of all the secure NATS entries."
	::= { snat 2 }

snatOrigEntry OBJECT-TYPE
	SYNTAX SnatOrigEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION "Columns in the table of secure NATS entries."
	INDEX { snatOrigAddr }
	::= { snatOrigTable 1 }

SnatOrigEntry ::= SEQUENCE {
	snatOrigEnabled			INTEGER,
	snatOrigAddr			IpAddress,
	snatOrigConnLimit		INTEGER,
	snatOrigTransAddr		IpAddress,
	snatOrigTcpIdleTimeout		Counter,
	snatOrigUdpIdleTimeout		Counter,
	snatOrigStatsZeroTime		Counter,
	snatOrigSecsCollectingStats	Counter,
	snatOrigBitsIn			Counter,
	snatOrigBitsOut			Counter,
	snatOrigPktsIn			Counter,
	snatOrigPktsOut			Counter,
	snatOrigCurrConns		INTEGER,
	snatOrigMaxConns		INTEGER,
	snatOrigTotalConns		Counter,
	snatOrigBitsInHi32		Counter,
	snatOrigBitsOutHi32		Counter,
	snatOrigPktsInHi32		Counter,
	snatOrigPktsOutHi32		Counter,
	snatOrigLastTransPort		INTEGER
}
	
snatOrigEnabled OBJECT-TYPE
	SYNTAX 	INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this OrigAddress enabled for SNAT?"
	::= { snatOrigEntry 1 }

snatOrigAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The ipaddress to the outside world for this SNAT."
	::= { snatOrigEntry 2 }

snatOrigConnLimit OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections through this snat."
	::= { snatOrigEntry 3 }

snatOrigTransAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The translation address corresponding to this
		original address."
	::= { snatOrigEntry 4 }

snatOrigTcpIdleTimeout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The idle timeout for TCP connections though this snat."
	::= { snatOrigEntry 5 }

snatOrigUdpIdleTimeout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The idle timeout for TCP connections though this snat."
	::= { snatOrigEntry 6 }

snatOrigStatsZeroTime OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The time we started collecting
		 statistics for this port."
	::= { snatOrigEntry 7 }

snatOrigSecsCollectingStats OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of seconds we have been collecting
		 statistics for this port."
	::= { snatOrigEntry 8 }

snatOrigBitsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Total bits in for this SNAT."
	::= { snatOrigEntry 9 }

snatOrigBitsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Total bits out for this SNAT."
	::= { snatOrigEntry 10 }

snatOrigPktsIn OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Total packets in for this SNAT."
	::= { snatOrigEntry 11 }

snatOrigPktsOut OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Total packets out for this SNAT."
	::= { snatOrigEntry 12 }

snatOrigCurrConns OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The current number of connections for this SNAT."
	::= { snatOrigEntry 13 }

snatOrigMaxConns OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The maximum number of connections this SNAT has
		had at any one time."
	::= { snatOrigEntry 14 }

snatOrigTotalConns OBJECT-TYPE
	SYNTAX Counter 
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The total number of connections this SNAT has
		had since the SNAT started."

	::= { snatOrigEntry 15 }

snatOrigBitsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of bits in for this SNAT."
	::= { snatOrigEntry 16 }

snatOrigBitsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of bits out for this SNAT."
	::= { snatOrigEntry 17 }

snatOrigPktsInHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of packets in for this SNAT."
	::= { snatOrigEntry 18 }

snatOrigPktsOutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "The upper 32 bits of the total number of packets out for this SNAT."
	::= { snatOrigEntry 19 }

snatOrigLastTransPort OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Last translated port accessed using the SNAT."
	::= { snatOrigEntry 20 }

--================================================================
-- General BIG/IP Scalars
--================================================================
uptime OBJECT-TYPE
	SYNTAX TimeTicks
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The uptime of this device -- not the uptime of the SNMP
		agent."
	::= { loadbal 50 }

contot OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this balancer has
		serviced."
	::= { loadbal 51 }

concur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of current connections."
	::= { loadbal 52 }

conmax OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections that this balancer
		has serviced at one time."
	::= { loadbal 53 }

pktsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total count of all packets read off the network."
	::= { loadbal 54 }

pktsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total count of all packets written to the network."
	::= { loadbal 55 }

bitsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of bits read off the network."
	::= { loadbal 56 }

bitsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total count of all bits written to the network."
	::= { loadbal 57 }

portdeny OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of port denies that has occuried."
	::= { loadbal 58 }

droppedin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of inbound packets that have been dropped."
	::= { loadbal 59 }

droppedout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of outbound packets that have been dropped."
	::= { loadbal 60 }

active OBJECT-TYPE
	SYNTAX INTEGER {
		standby (1),
		active (2) }
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"If this balancer in active or standby mode?"
	::= { loadbal 61 }

mirrorenabled OBJECT-TYPE
	SYNTAX INTEGER {
		disabled (1),
		enabled (2) }
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is mirroring enabled on this load balancer?"
	::= { loadbal 62 }

resetcounters OBJECT-TYPE
	SYNTAX INTEGER {
		unreset(2),
		reset (1)
	}
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Is mirroring enabled on this load balancer?"
	::= { loadbal 63 }

pktsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total count of all packets read off the network."
	::= { loadbal 64 }

pktsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total count of all packets written to the network."
	::= { loadbal 65 }

bitsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of bits read off the network."
	::= { loadbal 66 }

bitsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total count of all bits written to the network."
	::= { loadbal 67 }

nodePing OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Node ping interval in seconds."
	::= { loadbal 68 }

nodeTimeout OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Node timeout interval in seconds."
	::= { loadbal 69 }

loadbalMode OBJECT-TYPE
	SYNTAX INTEGER {
		roundrobin(1),
		ratio(2),
		fastest(3),
		leastConn(4),
		predictive(5),
		observed(6),
		priority(7),
		ratioNodeAddress(8),
		priorityNodeAddress(9),
		leastConnNodeAddress(10)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The global load balance mode."
	::= { loadbal 70 }

watchDogArmed OBJECT-TYPE
	SYNTAX INTEGER {
		armed(1), disarmed(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Watch dog card state."
	::= { loadbal 71 }

snatConnLimit OBJECT-TYPE
	SYNTAX INTEGER 
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Number of simultaneous connections allowed through a SNAT."
	::= { loadbal 72 }

snatTCPIdleTimeout OBJECT-TYPE
	SYNTAX INTEGER 
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Default connection timeout for SNAT TCP connections."
	::= { loadbal 73 }

snatUDPIdleTimeout OBJECT-TYPE
	SYNTAX INTEGER 
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Default timeout for SNAT UDP connections."
	::= { loadbal 74 }

gatewayFailsafe OBJECT-TYPE
	SYNTAX INTEGER {
		enabled(1),
		disabled(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is gateway failsafe pinging enabled."
	::= { loadbal 75 }

unitId OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Unit id(s) for this load balancer."
	::= { loadbal 76 }

memoryUsed OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Memory used by the load balancer kernal."
	::= { loadbal 77 }
 
memoryTotal OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Total memory available to the load balancer kernal."
	::= { loadbal 78 }

--================================================================
-- VADDRESS (Virtual Address) information
--================================================================
vaddressNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of virtual address's present on this system."
	::= { vaddress 1 }

vaddressTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VaddressEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A list of virtual address's entries. The number of
		entries is given by the value of vaddressNumber."
	::= { vaddress 2 }

vaddressEntry OBJECT-TYPE
	SYNTAX VaddressEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A vaddress entry containing vaddress information."
	INDEX { vaddressIndex }
	::= { vaddressTable 1 }

VaddressEntry ::=
	SEQUENCE {
		vaddressIndex		INTEGER (0..65535),
		vaddressDescr		DisplayString (SIZE (0..255)),
		vaddressIpAddr		IpAddress,
		vaddressPktsin		Counter,
		vaddressPktsout		Counter,
		vaddressBitsin		Counter,
		vaddressBitsout		Counter,
		vaddressConcur		INTEGER,
		vaddressConmax		INTEGER,
		vaddressConlimit	INTEGER,
		vaddressContot		Counter,
		vaddressStatus		INTEGER,
		vaddressPktsinHi32	Counter,
		vaddressPktsoutHi32	Counter,
		vaddressBitsinHi32	Counter,
		vaddressBitsoutHi32	Counter
	}

vaddressIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A unique value for each virtual address defined."
	::= { vaddressEntry 1 }

vaddressDescr OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A textual string describing the virtual address."
	::= { vaddressEntry 2 }

vaddressIpAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The IP address for this virtual address."
	::= { vaddressEntry 3 }

vaddressPktsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this virtual address."
	::= { vaddressEntry 4 }

vaddressPktsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out of this virtual address."
	::= { vaddressEntry 5 }

vaddressBitsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this virtual address."
	::= { vaddressEntry 6 }

vaddressBitsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out of this virtual address."
	::= { vaddressEntry 7 }

vaddressConcur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current number of connections on this virtual
		address."
	::= { vaddressEntry 8 }

vaddressConmax OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this virtual server
		has had open at any one time."
	::= { vaddressEntry 9 }

vaddressConlimit OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this virtual address
	can support at one time."
	::= { vaddressEntry 10 }

vaddressContot OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this virtual server
		has served since the server started."
	::= { vaddressEntry 11 }

vaddressStatus OBJECT-TYPE
	SYNTAX INTEGER {
		ready(1),
		maintainance(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Status of this virtual address."
	::= { vaddressEntry 12 }

vaddressPktsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this virtual address."
	::= { vaddressEntry 13 }

vaddressPktsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out of this virtual address."
	::= { vaddressEntry 14 }

vaddressBitsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this virtual address."
	::= { vaddressEntry 15 }

vaddressBitsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out of this virtual address."
	::= { vaddressEntry 16 }

--================================================================
-- NDADDR information
--================================================================
ndaddrNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of ndaddrs present on this system."
	::= { ndaddr 1 }

ndaddrTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NdaddrEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A list of ndaddr entries. The number of entries is
		given by the value of ndaddrNumber."
	::= { ndaddr 2 }

ndaddrEntry OBJECT-TYPE
	SYNTAX NdaddrEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A ndaddr entry containing ndaddr statitics."
	INDEX { ndaddrIndex }
	::= { ndaddrTable 1 }

NdaddrEntry ::=
	SEQUENCE {
		ndaddrIndex	INTEGER (0..65535),
		ndaddrDescr	DisplayString (SIZE (0..255)),
		ndaddrIpAddr	IpAddress,
		ndaddrPktsin	Counter,
		ndaddrPktsout	Counter,
		ndaddrBitsin	Counter,
		ndaddrBitsout	Counter,
		ndaddrConcur	INTEGER,
		ndaddrConmax	INTEGER,
		ndaddrConlimit	INTEGER,
		ndaddrContot	Counter,
		ndaddrStatus	INTEGER,
		ndaddrPktsinHi32	Counter,
		ndaddrPktsoutHi32	Counter,
		ndaddrBitsinHi32	Counter,
		ndaddrBitsoutHi32	Counter,
		ndaddrMaintenance	INTEGER
	}

ndaddrIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A unique value for each ndaddr defined."
	::= { ndaddrEntry 1 }

ndaddrDescr OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A textual string describing the node address."
	::= { ndaddrEntry 2 }

ndaddrIpAddr OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The Node address (IP Address)."
	::= { ndaddrEntry 3 }

ndaddrPktsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this node address."
	::= { ndaddrEntry 4 }

ndaddrPktsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this node address."
	::= { ndaddrEntry 5 }

ndaddrBitsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this node address."
	::= { ndaddrEntry 6 }

ndaddrBitsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this node address."
	::= { ndaddrEntry 7 }

ndaddrConcur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of current connections for this node
		address."
	::= { ndaddrEntry 8 }

ndaddrConmax OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this node address
		has had oppen at one time."
	::= { ndaddrEntry 9 }

ndaddrConlimit OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this node address
		is allowed to have open at one time."
	::= { ndaddrEntry 10 }

ndaddrContot OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total connections that this node address had
		had."
	::= { ndaddrEntry 11 }

ndaddrStatus OBJECT-TYPE
	SYNTAX INTEGER {
		up(1),
		down(2),
		invalid(3),
		valid(4),
		unchecked(6),
		unknown(7)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The status of this node address."
	::= { ndaddrEntry 12 }

ndaddrPktsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this node address."
	::= { ndaddrEntry 13 }

ndaddrPktsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this node address."
	::= { ndaddrEntry 14 }

ndaddrBitsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this node address."
	::= { ndaddrEntry 15 }

ndaddrBitsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this node address."
	::= { ndaddrEntry 16 }

ndaddrMaintenance OBJECT-TYPE
	SYNTAX INTEGER {
		true(1),
		false(2)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Is this node address in maintenance mode."
	::= { ndaddrEntry 17 }


--================================================================
-- NAT (Network Address Translation) information
--================================================================
natNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of NATS present on this system."
	::= { nat 1 }

natTable OBJECT-TYPE
	SYNTAX SEQUENCE OF NatEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A list of NAT entries. The number of
		entries is given by the value of natNumber."
	::= { nat 2 }

natEntry OBJECT-TYPE
	SYNTAX NatEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A NAT entry containing information by nat."
	INDEX { natIndex }
	::= { natTable 1 }

NatEntry ::=
	SEQUENCE {
		natIndex	INTEGER (0..65535),
		natDescr	DisplayString (SIZE (0..255)),
		natIpAddrFR	IpAddress,
		natIpAddrTO	IpAddress,
		natPktsin	Counter,
		natPktsout	Counter,
		natBitsin	Counter,
		natBitsout	Counter,
		natPktsinHi32	Counter,
		natPktsoutHi32	Counter,
		natBitsinHi32	Counter,
		natBitsoutHi32	Counter,
		natOutsideNetmask IpAddress,
		natOutsideBroadcast IpAddress,
		natInterface	DisplayString (SIZE (0..255)),
		natUnitId	INTEGER
	}

natIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A unique value for each NAT defined."
	::= { natEntry 1 }

natDescr OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A textual string describing the NAT."
	::= { natEntry 2 }

natIpAddrFR OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The NAT's from IP Address."
	::= { natEntry 3 }

natIpAddrTO OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The NAT's TO IP Address."
	::= { natEntry 4 }

natPktsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this NAT."
	::= { natEntry 5 }

natPktsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this NAT."
	::= { natEntry 6 }

natBitsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this NAT."
	::= { natEntry 7 }

natBitsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this NAT."
	::= { natEntry 8 }

natPktsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this NAT."
	::= { natEntry 9 }

natPktsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this NAT."
	::= { natEntry 10 }

natBitsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this NAT."
	::= { natEntry 11 }

natBitsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this NAT."
	::= { natEntry 12 }

natOutsideNetmask OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The outside netmask for this NAT."
	::= { natEntry 13 }

natOutsideBroadcast OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The outside broadcast address for this NAT."
	::= { natEntry 14 }

natInterface OBJECT-TYPE
	SYNTAX 	DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The interface name for this NAT."
	::= { natEntry 15 }

natUnitId OBJECT-TYPE
	SYNTAX 	INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The unit id associated with this NAT."
	::= { natEntry 16 }

--================================================================
-- VPORT information
--================================================================
vportNumber OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of vports present on this system."
	::= { vport 1 }

vportTable OBJECT-TYPE
	SYNTAX SEQUENCE OF VportEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A list of vport entries. The number of
entries is given by the value of vportNumber."
	::= { vport 2 }

vportEntry OBJECT-TYPE
	SYNTAX VportEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A vport entry containing vport statitics."
	INDEX { vportIndex }
	::= { vportTable 1 }

VportEntry ::=
	SEQUENCE {
		vportIndex	INTEGER (0..65535),
		vportPort	INTEGER,
		vportDescr	DisplayString (SIZE (0..255)),
		vportPktsin	Counter,
		vportPktsout	Counter,
		vportBitsin	Counter,
		vportBitsout	Counter,
		vportConcur	INTEGER,
		vportConmax	INTEGER,
		vportConlimit	INTEGER,
		vportContot	Counter,
		vportReaped	Counter,
		vportPktsinHi32	Counter,
		vportPktsoutHi32	Counter,
		vportBitsinHi32	Counter,
		vportBitsoutHi32	Counter,
		vportAllowed	INTEGER,
		vportTCPpersistance	INTEGER,
		vportUDPpersistance	INTEGER
	}

vportIndex OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A unique value for each virtual port defined."
	::= { vportEntry 1 }

vportPort OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The Virutal port's port Number."
	::= { vportEntry 2 }

vportDescr OBJECT-TYPE
	SYNTAX DisplayString (SIZE (0..255))
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"A textual string describing the virtual port."
	::= { vportEntry 3 }

vportPktsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this virtual port."
	::= { vportEntry 4 }

vportPktsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this virtual port."
	::= { vportEntry 5 }

vportBitsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this virtual port."
	::= { vportEntry 6 }

vportBitsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this virtual port."
	::= { vportEntry 7 }

vportConcur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of current connections for this virtual
		port"
	::= { vportEntry 8 }

vportConmax OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this virtual port
		has had open at any one time."
	::= { vportEntry 9 }

vportConlimit OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The connection limit for this virtual port."
	::= { vportEntry 10 }

vportContot OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this virtual port
		has had open since the server started."
	::= { vportEntry 11 }

vportReaped OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total connections reaped on this virtual port."
	::= { vportEntry 12 }

vportPktsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets in for this virtual port."
	::= { vportEntry 13 }

vportPktsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total packets out for this virtual port."
	::= { vportEntry 14 }

vportBitsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits in for this virtual port."
	::= { vportEntry 15 }

vportBitsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total bits out for this virtual port."
	::= { vportEntry 16 }

vportAllowed OBJECT-TYPE
	SYNTAX INTEGER { allowed(1), disallowed(2) }
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Is this port allowed."
	::= { vportEntry 17 }

vportTCPpersistance OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of seconds before TCP persistence
		expires for this virtual port."
	::= { vportEntry 18 }

vportUDPpersistance OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION "Number of seconds before UDP persistence
		expires for this virtual port."
	::= { vportEntry 19 }

--================================================================
-- MEMBER information
-- member information is indexed by Virtual Path and Ordinal Number
--================================================================

memberTable OBJECT-TYPE
	SYNTAX SEQUENCE OF MemberEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"A table containing balancer member information."
	::= { member 2 }

memberEntry OBJECT-TYPE
	SYNTAX MemberEntry
	ACCESS not-accessible
	STATUS mandatory
	DESCRIPTION
		"Information Specific to Members."
	INDEX { memberVirtualAddress, memberVirtualAddressPort, 
		memberOrdinal }
	::= { memberTable 1 }

MemberEntry ::=
	SEQUENCE {
		memberVirtualAddress		IpAddress,
		memberVirtualAddressPort	INTEGER (0..65535),
		memberOrdinal			INTEGER (0..65535),
		memberAddress			IpAddress,
		memberPort			INTEGER,
		memberStatus			INTEGER,
		memberPktsin			Counter,
		memberPktsout			Counter,
		memberBitsin			Counter,
		memberBitsout			Counter,
		memberConcur			INTEGER,
		memberConmax			INTEGER,
		memberConlimit			INTEGER,
		memberContot			Counter,
		memberPktsinHi32			Counter,
		memberPktsoutHi32			Counter,
		memberBitsinHi32			Counter,
		memberBitsoutHi32			Counter
	}

memberVirtualAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The virtual IP address."
	::= { memberEntry 1 }

memberVirtualAddressPort OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The virtual IP address port."
	::= { memberEntry 2 }

memberOrdinal OBJECT-TYPE
	SYNTAX INTEGER (0..65535)
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The virtual IP address member ordinal number."
	::= { memberEntry 3 }

memberAddress OBJECT-TYPE
	SYNTAX IpAddress
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The node ip address for this member."
	::= { memberEntry 4 }

memberPort OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The node port for this member."
	::= { memberEntry 5 }

memberStatus OBJECT-TYPE
	SYNTAX INTEGER {
		up(1),
		down(2),
		invalid(3),
		maintainance(4),
		unchecked(5),
		unknown(6)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The status of this member."
	::= { memberEntry 6 }

memberPktsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of packets read off the network for
		this member."
	::= { memberEntry 7 }

memberPktsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of packets written to the network for
		this member."
	::= { memberEntry 8 }

memberBitsin OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of bits read off the network for this
		member."
	::= { memberEntry 9 }

memberBitsout OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of bits written to the network for
		this member."
	::= { memberEntry 10 }

memberConcur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The number of connections currently open for this
		member."
	::= { memberEntry 11 }

memberConmax OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The maximum number of connections this member has had
		open at any one time."
	::= { memberEntry 12 }

memberConlimit OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this member can
		support at one time."
	::= { memberEntry 13 }

memberContot OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The total number of connections this member has
		served since the server started."
	::= { memberEntry 14 }

memberPktsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of packets read off the network for
		this member."
	::= { memberEntry 15 }

memberPktsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of packets written to the network for
		this member."
	::= { memberEntry 16 }

memberBitsinHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of bits read off the network for this
		member."
	::= { memberEntry 17 }

memberBitsoutHi32 OBJECT-TYPE
	SYNTAX Counter
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The count of bits written to the network for
		this member."
	::= { memberEntry 18 }

--================================================================
-- TRAP Information
--================================================================
loadBalTrapMisc TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"Uncatagorized trap."
	::= 1
loadBalTrapServiceDown TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"Service Came Down."
	::= 2
loadBalTrapServiceUP TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"Service Came Up."
	::= 3
loadBalTrapReset TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"System Reset."
	::= 4
loadBalTrapDenial TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"REQUEST DENIAL"
	::= 5
loadBalTrapLogin TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"Root Login."
	::= 6
loadBalTrapRemoveUnit TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"Removing unit. Potential failover of this BIG/ip."
	::= 7 
loadBalTrapAddUnit TRAP-TYPE
	ENTERPRISE loadBalTraps
	DESCRIPTION
		"Adding unit. This BIG/ip has taken responsibility for a new unit id."
	::= 8 

END