ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB DEFINITIONS ::= BEGIN -- enterasys-spanning-tree-diagnostic-mib.txt -- -- Part Number: -- -- -- This module provides authoritative definitions for Enterasys -- Networks' IEEE Spanning Tree Diagnostic MIB. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys Networks grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in -- connection with the management of Enterasys Networks products. -- Copyright 2002-2006 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, DateAndTime FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB BridgeId, dot1dStpPortEntry, dot1dStpPort FROM BRIDGE-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsysSpanningTreeDiagnosticMIB MODULE-IDENTITY LAST-UPDATED "200610041949Z" -- Wed Oct 4 19:49 GMT 2006 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to the Spanning Tree Protocols IEEE 802.1D, 802.1w, and 802.1s." REVISION "200610041949Z" -- Wed Oct 4 19:49 GMT 2006 DESCRIPTION "Added an object specifying a disputed BPDU threshold value, and added two disputed BPDU threshold exceeded notifications, one for the CIST and one for MSTIs." REVISION "200501241546Z" -- Mon Jan 24 15:46 GMT 2005 DESCRIPTION "Changed references of dot1dBasePort to dot1dStpPort." REVISION "200406071920Z" -- Mon Jun 7 19:20 GMT 2004 DESCRIPTION "Added the etsysStpDiagCistBridgePortTable and etsysStpDiagMstiBridgePortTable which are the same as the etsysStpDiagCistPortTable and the etsysStpDiagMstiPortTable but are index by bridge port." REVISION "200301151918Z" -- Wed Jan 15 19:18 GMT 2003 DESCRIPTION "Added four objects to count the number of inferior BPDUs received from a bridge port that incorrectly believes itself to be the designated port." REVISION "200211211901Z" -- Thu Nov 21 19:01 GMT 2002 DESCRIPTION "Added four objects to count the reception and transmission of IEEE 802.1D Configuration BPDUs with their Topology Change flags set, both on a overall and on a per port basis. Deprecated the etsysStpDiagMstiPortTopChanges object." REVISION "200211182136Z" -- Mon Nov 18 21:36 GMT 2002 DESCRIPTION "Added etsysStpDiagMstiPortNumber as an index to etsysStpDiagMstiPortTable." REVISION "200210102101Z" -- Thu Oct 10 21:01 GMT 2002 DESCRIPTION "The initial version of this MIB module" ::= { etsysModules 29 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- EtsysStpPortRole ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Indicates the port role for RST and MST: disabled - This port has no role. root - This port has the role of root port. designated - This port has the role of designated port. alternate - This port has the role of alternate port. backUp - This port has the role of backup port. master - This port has the role of master port." REFERENCE "IEEE P802.1s/D15 clause 13.12" SYNTAX INTEGER { disabled(1), root(2), designated(3), alternate(4), backUp(5), master(6) } -- ---------------------------------------------------------- -- -- branches in the ENTERASYS-SPANNING-TREE-DIAGNOSTIC-MIB -- ---------------------------------------------------------- -- etsysStpDiagObjects OBJECT IDENTIFIER ::= { etsysSpanningTreeDiagnosticMIB 1 } etsysStpDiagControl OBJECT IDENTIFIER ::= { etsysStpDiagObjects 1 } etsysStpDiagCommon OBJECT IDENTIFIER ::= { etsysStpDiagObjects 2 } etsysStpDiagCistPort OBJECT IDENTIFIER ::= { etsysStpDiagObjects 3 } etsysStpDiagMsti OBJECT IDENTIFIER ::= { etsysStpDiagObjects 4 } etsysStpDiagMstiPort OBJECT IDENTIFIER ::= { etsysStpDiagObjects 5 } etsysStpDiagRootHistory OBJECT IDENTIFIER ::= { etsysStpDiagObjects 6 } etsysStpDiagTrapConfig OBJECT IDENTIFIER ::= { etsysStpDiagObjects 7 } etsysStpDiagNotifications OBJECT IDENTIFIER ::= { etsysStpDiagObjects 0 } -- ---------------------------------------------------------- -- -- Spanning Tree diagnostic MIB control info -- ---------------------------------------------------------- -- etsysStpDiagCounterReset OBJECT-TYPE SYNTAX INTEGER { noOp(1), reset(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Reading this object always returns noOp(1). Writing the value noOp(1) has no effect. Writing the value reset(2) to this object will cause all of the counters in this MIB module to be reset to zero. Zeroing the counters in this MIB module MUST NOT effect the data presented in any other MIB module. Zeroing the counters in this MIB module WILL affect all users of this MIB module. It is expected that this MIB module will be used by only one person at a time, as counter resets will cause counter discontinuities for all users." ::= { etsysStpDiagControl 1 } etsysStpDiagCounterResetElapsedTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since the counters in this MIB module were last reset to zero. If the counters have not been reset to zero since the last initialization return the number of seconds since the last initialization." ::= { etsysStpDiagControl 2 } etsysStpDiagCounterResetDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time at which the counters in this MIB module were last reset to zero. If the counters have not been reset to zero since the last initialization return the date and time of the last initialization." ::= { etsysStpDiagControl 3 } -- ---------------------------------------------------------- -- -- Common and Internal Spanning Tree diagnostic info -- ---------------------------------------------------------- -- etsysStpDiagTopChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of topology changes. This is a shadow copy of the dot1dStpTopChanges object from the IETF BRIDGE-MIB. Zeroing this object MUST NOT affect dot1dStpTopChanges." REFERENCE "IEEE P802.1s/D15 clause 12.8.1.1.3" ::= { etsysStpDiagCommon 1 } etsysStpDiagCommonInvalidBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of invalid BPDUs received." REFERENCE "IEEE P802.1s/D15 clause 14.4" ::= { etsysStpDiagCommon 2 } etsysStpDiagCommonStpCfgBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs received." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCommon 3 } etsysStpDiagCommonStpCfgBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs transmitted." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCommon 4 } etsysStpDiagCommonStpTcnBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Topology Change Notification BPDUs received." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCommon 5 } etsysStpDiagCommonStpTcnBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Topology Change Notification BPDUs transmitted." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCommon 6 } etsysStpDiagCommonRstBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs received." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCommon 7 } etsysStpDiagCommonRstBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs transmitted." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCommon 8 } etsysStpDiagCommonRstTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs received with the Topology Change flag set. These BPDUs are included in the overall count of 802.1w BPDUs received in the etsysStpDiagCommonRstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCommon 9 } etsysStpDiagCommonRstTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs transmitted with the Topology Change flag set. These BPDUs are included in the overall count of 802.1w BPDUs transmitted in the etsysStpDiagCommonRstBpduTx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCommon 10 } etsysStpDiagCommonMstBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCommon 11 } etsysStpDiagCommonMstBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCommon 12 } etsysStpDiagCommonMstCistTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received with the Topology Change flag set in the CIST Flags field. These BPDUs are included in the overall count of 802.1s BPDUs received in the etsysStpDiagCommonMstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCommon 13 } etsysStpDiagCommonMstCistTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted with the Topology Change flag set in the CIST Flags field. These BPDUs are included in the overall count of 802.1s BPDUs transmitted in the etsysStpDiagCommonMstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCommon 14 } etsysStpDiagCommonStpCfgBpduRxTcFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs received with the Topology Change flag set. These BPDUs are included in the overall count of 802.1D Configuration BPDUs received in the etsysStpDiagCommonStpCfgBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCommon 15 } etsysStpDiagCommonStpCfgBpduTxTcFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs transmitted with the Topology Change flag set. These BPDUs are included in the overall count of 802.1D Configuration BPDUs transmitted in the etsysStpDiagCommonStpCfgBpduTx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCommon 16 } etsysStpDiagCommonDisputedBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BPDUs received with inferior designated information and that have the learning flag set. These BPDU's may indicate the presence of a one way communication path between adjacent bridge ports. They can also occur as part of normal operation of a network, and may persist for a while during power up." REFERENCE "IEEE DRAFT P802.1y/D4 clause 17.19.25" ::= { etsysStpDiagCommon 17 } etsysStpDiagMessageExpiration OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the BPDU message timer expired. This indicates that BPDUs are not being received on a regular basis." ::= { etsysStpDiagCommon 28 } -- ---------------------------------------------------------- -- -- Common and Internal Spanning Tree per port diagnostic info -- ---------------------------------------------------------- -- -- -- ---------------------------------------------------------- -- -- NOTE: This table is instanced by MIB-II interface number. -- ---------------------------------------------------------- -- etsysStpDiagCistPortTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysStpDiagCistPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains port level diagnostic information indexed by its MIB-II interface number." ::= { etsysStpDiagCistPort 1 } etsysStpDiagCistPortEntry OBJECT-TYPE SYNTAX EtsysStpDiagCistPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of diagnostic information maintained for every port." INDEX { etsysStpDiagCistPortNumber } ::= { etsysStpDiagCistPortTable 1 } EtsysStpDiagCistPortEntry ::= SEQUENCE { etsysStpDiagCistPortNumber InterfaceIndex, etsysStpDiagCistPortRole EtsysStpPortRole, etsysStpDiagCistPortInvalidBpdu Counter32, etsysStpDiagCistPortStpCfgBpduRx Counter32, etsysStpDiagCistPortStpCfgBpduTx Counter32, etsysStpDiagCistPortStpTcnBpduRx Counter32, etsysStpDiagCistPortStpTcnBpduTx Counter32, etsysStpDiagCistPortRstBpduRx Counter32, etsysStpDiagCistPortRstBpduTx Counter32, etsysStpDiagCistPortRstTcRx Counter32, etsysStpDiagCistPortRstTcTx Counter32, etsysStpDiagCistPortMstBpduRx Counter32, etsysStpDiagCistPortMstBpduTx Counter32, etsysStpDiagCistPortMstCistTcRx Counter32, etsysStpDiagCistPortMstCistTcTx Counter32, etsysStpDiagCistPortExpiration Counter32, etsysStpDiagCistPortStpCfgBpduRxTcFlagSet Counter32, etsysStpDiagCistPortStpCfgBpduTxTcFlagSet Counter32, etsysStpDiagCistPortDisputedBpdu Counter32 } etsysStpDiagCistPortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The MIB-II interface number of the port for which this entry contains Spanning Tree Protocol diagnostic information." REFERENCE "IEEE P802.1s/D15 clause 12.8.2" ::= { etsysStpDiagCistPortEntry 1 } etsysStpDiagCistPortRole OBJECT-TYPE SYNTAX EtsysStpPortRole MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port role for this port." REFERENCE "IEEE P802.1s/D15 clause 13.12" ::= { etsysStpDiagCistPortEntry 2 } etsysStpDiagCistPortInvalidBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of invalid BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.4" ::= { etsysStpDiagCistPortEntry 3 } etsysStpDiagCistPortStpCfgBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistPortEntry 4 } etsysStpDiagCistPortStpCfgBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistPortEntry 5 } etsysStpDiagCistPortStpTcnBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Topology Change Notification BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistPortEntry 6 } etsysStpDiagCistPortStpTcnBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Topology Change Notification BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistPortEntry 7 } etsysStpDiagCistPortRstBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistPortEntry 8 } etsysStpDiagCistPortRstBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistPortEntry 9 } etsysStpDiagCistPortRstTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs received on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1w BPDUs received in the etsysStpDiagCistPortRstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistPortEntry 10 } etsysStpDiagCistPortRstTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs transmitted on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1w BPDUs transmitted in the etsysStpDiagCistPortRstBpduTx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistPortEntry 11 } etsysStpDiagCistPortMstBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistPortEntry 12 } etsysStpDiagCistPortMstBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistPortEntry 13 } etsysStpDiagCistPortMstCistTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received on this port with the Topology Change flag set in the CIST Flags field. These BPDUs are included in the overall count of 802.1s BPDUs received in the etsysStpDiagCistPortMstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistPortEntry 14 } etsysStpDiagCistPortMstCistTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted on this port with the Topology Change flag set in the CIST Flags field. These BPDUs are included in the overall count of 802.1s BPDUs transmitted in the etsysStpDiagCistPortMstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistPortEntry 15 } etsysStpDiagCistPortExpiration OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the BPDU message timer expired. This indicates that BPDUs are not being received on a regular basis." ::= { etsysStpDiagCistPortEntry 16 } etsysStpDiagCistPortStpCfgBpduRxTcFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs received on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1D Configuration BPDUs received in the etsysStpDiagCistPortStpCfgBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistPortEntry 17 } etsysStpDiagCistPortStpCfgBpduTxTcFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs transmitted on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1D Configuration BPDUs transmitted in the etsysStpDiagCistPortStpCfgBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistPortEntry 18 } etsysStpDiagCistPortDisputedBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BPDUs received on this port with inferior designated information and that have the learning flag set. These BPDU's may indicate the presence of a one way communication path between adjacent bridge ports. They can also occur as part of normal operation of a network, and may persist for a while during power up." REFERENCE "IEEE DRAFT P802.1y/D4 clause 17.19.25" ::= { etsysStpDiagCistPortEntry 19 } -- ---------------------------------------------------------- -- -- Common and Internal Spanning Tree per bridge port diag info -- ---------------------------------------------------------- -- -- -- ---------------------------------------------------------- -- -- NOTE: This table augments dot1dStpPortEntry -- ---------------------------------------------------------- -- etsysStpDiagCistBridgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysStpDiagCistBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains port level diagnostic information indexed by bridge port." ::= { etsysStpDiagCistPort 2 } etsysStpDiagCistBridgePortEntry OBJECT-TYPE SYNTAX EtsysStpDiagCistBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of diagnostic information maintained for every port." AUGMENTS { dot1dStpPortEntry } ::= { etsysStpDiagCistBridgePortTable 1 } EtsysStpDiagCistBridgePortEntry ::= SEQUENCE { etsysStpDiagCistBridgePortRole EtsysStpPortRole, etsysStpDiagCistBridgePortInvalidBpdu Counter32, etsysStpDiagCistBridgePortStpCfgBpduRx Counter32, etsysStpDiagCistBridgePortStpCfgBpduTx Counter32, etsysStpDiagCistBridgePortStpTcnBpduRx Counter32, etsysStpDiagCistBridgePortStpTcnBpduTx Counter32, etsysStpDiagCistBridgePortRstBpduRx Counter32, etsysStpDiagCistBridgePortRstBpduTx Counter32, etsysStpDiagCistBridgePortRstTcRx Counter32, etsysStpDiagCistBridgePortRstTcTx Counter32, etsysStpDiagCistBridgePortMstBpduRx Counter32, etsysStpDiagCistBridgePortMstBpduTx Counter32, etsysStpDiagCistBridgePortMstCistTcRx Counter32, etsysStpDiagCistBridgePortMstCistTcTx Counter32, etsysStpDiagCistBridgePortExpiration Counter32, etsysStpDiagCistBridgePortStpCfgBpduRxTcFlagSet Counter32, etsysStpDiagCistBridgePortStpCfgBpduTxTcFlagSet Counter32, etsysStpDiagCistBridgePortDisputedBpdu Counter32 } etsysStpDiagCistBridgePortRole OBJECT-TYPE SYNTAX EtsysStpPortRole MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port role for this port." REFERENCE "IEEE P802.1s/D15 clause 13.12" ::= { etsysStpDiagCistBridgePortEntry 2 } etsysStpDiagCistBridgePortInvalidBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of invalid BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.4" ::= { etsysStpDiagCistBridgePortEntry 3 } etsysStpDiagCistBridgePortStpCfgBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistBridgePortEntry 4 } etsysStpDiagCistBridgePortStpCfgBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistBridgePortEntry 5 } etsysStpDiagCistBridgePortStpTcnBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Topology Change Notification BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistBridgePortEntry 6 } etsysStpDiagCistBridgePortStpTcnBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Topology Change Notification BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistBridgePortEntry 7 } etsysStpDiagCistBridgePortRstBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistBridgePortEntry 8 } etsysStpDiagCistBridgePortRstBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistBridgePortEntry 9 } etsysStpDiagCistBridgePortRstTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs received on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1w BPDUs received in the etsysStpDiagCistPBridgeortRstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistBridgePortEntry 10 } etsysStpDiagCistBridgePortRstTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1w BPDUs transmitted on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1w BPDUs transmitted in the etsysStpDiagCistBridgePortRstBpduTx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.2" ::= { etsysStpDiagCistBridgePortEntry 11 } etsysStpDiagCistBridgePortMstBpduRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistBridgePortEntry 12 } etsysStpDiagCistBridgePortMstBpduTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted on this port." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistBridgePortEntry 13 } etsysStpDiagCistBridgePortMstCistTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received on this port with the Topology Change flag set in the CIST Flags field. These BPDUs are included in the overall count of 802.1s BPDUs received in the etsysStpDiagCistBridgePortMstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistBridgePortEntry 14 } etsysStpDiagCistBridgePortMstCistTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted on this port with the Topology Change flag set in the CIST Flags field. These BPDUs are included in the overall count of 802.1s BPDUs transmitted in the etsysStpDiagCistBridgePortMstBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.3" ::= { etsysStpDiagCistBridgePortEntry 15 } etsysStpDiagCistBridgePortExpiration OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of times the BPDU message timer expired. This indicates that BPDUs are not being received on a regular basis." ::= { etsysStpDiagCistBridgePortEntry 16 } etsysStpDiagCistBridgePortStpCfgBpduRxTcFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs received on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1D Configuration BPDUs received in the etsysStpDiagCistBridgePortStpCfgBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistBridgePortEntry 17 } etsysStpDiagCistBridgePortStpCfgBpduTxTcFlagSet OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1D Configuration BPDUs transmitted on this port with the Topology Change flag set. These BPDUs are included in the overall count of 802.1D Configuration BPDUs transmitted in the etsysStpDiagCistBridgePortStpCfgBpduRx object." REFERENCE "IEEE P802.1s/D15 clause 14.3.1" ::= { etsysStpDiagCistBridgePortEntry 18 } etsysStpDiagCistBridgePortDisputedBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BPDUs received on this port with inferior designated information and that have the learning flag set. These BPDU's may indicate the presence of a one way communication path between adjacent bridge ports. They can also occur as part of normal operation of a network, and may persist for a while during power up." REFERENCE "IEEE DRAFT P802.1y/D4 clause 17.19.25" ::= { etsysStpDiagCistBridgePortEntry 19 } -- ---------------------------------------------------------- -- -- Multiple Spanning Tree Instance diagnostic info -- ---------------------------------------------------------- -- etsysStpDiagMstiTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysStpDiagMstiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains diagnostic information for each IEEE 802.1s Multiple Spanning Tree Instance." ::= { etsysStpDiagMsti 1 } etsysStpDiagMstiEntry OBJECT-TYPE SYNTAX EtsysStpDiagMstiEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of diagnostic information for each IEEE 802.1s Multiple Spanning Tree Instance that is configured." INDEX { etsysStpDiagMstiId } ::= { etsysStpDiagMstiTable 1 } EtsysStpDiagMstiEntry ::= SEQUENCE { etsysStpDiagMstiId Unsigned32, etsysStpDiagMstiTopChanges Counter32, etsysStpDiagMstiConfigMsgRx Counter32, etsysStpDiagMstiConfigMsgTx Counter32, etsysStpDiagMstiTcRx Counter32, etsysStpDiagMstiTcTx Counter32, etsysStpDiagMstiDisputedBpdu Counter32 } etsysStpDiagMstiId OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique ID of this Multiple Spanning Tree instance. The CIST (common and internal spanning tree) is not represented in this table. There are a maximum of sixty-four MSTIs, each with a unique identifier in the range of 1-4094." REFERENCE "IEEE P802.1s/D15 clause 12.8.1.2.2" ::= { etsysStpDiagMstiEntry 1 } etsysStpDiagMstiTopChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of topology changes detected on this Mulitple Spanning Tree Instance." REFERENCE "IEEE P802.1s/D15 clause 12.8.1.2.3" ::= { etsysStpDiagMstiEntry 2 } etsysStpDiagMstiConfigMsgRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received with MSTI Configuration Messages for this MSTI." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiEntry 3 } etsysStpDiagMstiConfigMsgTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted with MSTI Configuration Messages for this MSTI." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiEntry 4 } etsysStpDiagMstiTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received with MSTI Configuration Messages for this MSTI that had the Topology Change flag set in the MSTI Flags field." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiEntry 5 } etsysStpDiagMstiTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted with MSTI Configuration Messages for this MSTI that had the Topology Change flag set in the MSTI Flags field." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiEntry 6 } etsysStpDiagMstiDisputedBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BPDUs received on this MSTI with inferior designated information and that have the learning flag set. These BPDU's may indicate the presence of a one way communication path between adjacent bridge ports. They can also occur as part of normal operation of a network, and may persist for a while during power up." REFERENCE "IEEE DRAFT P802.1y/D4 clause 17.19.25" ::= { etsysStpDiagMstiEntry 7 } -- ---------------------------------------------------------- -- -- Multiple Spanning Tree Instance per port diagnostic info -- ---------------------------------------------------------- -- -- -- ---------------------------------------------------------- -- -- NOTE: This table is instanced by MIB-II interface number. -- ---------------------------------------------------------- -- etsysStpDiagMstiPortTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysStpDiagMstiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains diagnostic information for each port on every IEEE 802.1s Multiple Spanning Tree Instance." ::= { etsysStpDiagMstiPort 1 } etsysStpDiagMstiPortEntry OBJECT-TYPE SYNTAX EtsysStpDiagMstiPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of diagnostic information for each port on every IEEE 802.1s Multiple Spanning Tree Instance that is configured." INDEX { etsysStpDiagMstiPortMstiId, etsysStpDiagMstiPortNumber } ::= { etsysStpDiagMstiPortTable 1 } EtsysStpDiagMstiPortEntry ::= SEQUENCE { etsysStpDiagMstiPortMstiId Unsigned32, etsysStpDiagMstiPortNumber InterfaceIndex, etsysStpDiagMstiPortTopChanges Counter32, etsysStpDiagMstiPortConfigMsgRx Counter32, etsysStpDiagMstiPortConfigMsgTx Counter32, etsysStpDiagMstiPortTcRx Counter32, etsysStpDiagMstiPortTcTx Counter32, etsysStpDiagMstiPortDisputedBpdu Counter32 } etsysStpDiagMstiPortMstiId OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique ID of this Multiple Spanning Tree instance. The CIST (common and internal spanning tree) is not represented in this table. There are a maximum of sixty-four MSTIs, each with a unique identifier in the range of 1-4094." REFERENCE "IEEE P802.1s/D15 clause 12.8.1.2.2" ::= { etsysStpDiagMstiPortEntry 1 } etsysStpDiagMstiPortNumber OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The port number of the port for which this entry contains Spanning Tree Protocol diagnostic information." REFERENCE "IEEE P802.1s/D15 clause 12.8.2" ::= { etsysStpDiagMstiPortEntry 2 } etsysStpDiagMstiPortTopChanges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The total number of topology changes detected on this Mulitple Spanning Tree Instance and port." REFERENCE "IEEE P802.1s/D15 clause 12.8.1.1.3" ::= { etsysStpDiagMstiPortEntry 3 } etsysStpDiagMstiPortConfigMsgRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received with MSTI Configuration Messages for this MSTI and port." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiPortEntry 4 } etsysStpDiagMstiPortConfigMsgTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted with MSTI Configuration Messages for this MSTI and port." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiPortEntry 5 } etsysStpDiagMstiPortTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received with MSTI Configuration Messages for this MSTI and port that had the Topology Change flag set in the MSTI Flags field." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiPortEntry 6 } etsysStpDiagMstiPortTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted with MSTI Configuration Messages for this MSTI and port that had the Topology Change flag set in the MSTI Flags field." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiPortEntry 7 } etsysStpDiagMstiPortDisputedBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BPDUs received on this MSTI and port with inferior designated information that have the learning flag set. These BPDU's may indicate the presence of a one way communication path between adjacent bridge ports. They can also occur as part of normal operation of a network, and may persist for a while during power up." REFERENCE "IEEE DRAFT P802.1y/D4 clause 17.19.25" ::= { etsysStpDiagMstiPortEntry 8 } -- ---------------------------------------------------------- -- -- Multiple Spanning Tree Instance per port diagnostic info -- ---------------------------------------------------------- -- -- -- ---------------------------------------------------------- -- -- NOTE: This table is instanced by MSTI Id and bridge port. -- ---------------------------------------------------------- -- etsysStpDiagMstiBridgePortTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysStpDiagMstiBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains diagnostic information for each port on every IEEE 802.1s Multiple Spanning Tree Instance." ::= { etsysStpDiagMstiPort 2 } etsysStpDiagMstiBridgePortEntry OBJECT-TYPE SYNTAX EtsysStpDiagMstiBridgePortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of diagnostic information for each port on every IEEE 802.1s Multiple Spanning Tree Instance that is configured." INDEX { etsysStpDiagMstiBridgePortMstiId, dot1dStpPort } ::= { etsysStpDiagMstiBridgePortTable 1 } EtsysStpDiagMstiBridgePortEntry ::= SEQUENCE { etsysStpDiagMstiBridgePortMstiId Unsigned32, etsysStpDiagMstiBridgePortRole EtsysStpPortRole, etsysStpDiagMstiBridgePortConfigMsgRx Counter32, etsysStpDiagMstiBridgePortConfigMsgTx Counter32, etsysStpDiagMstiBridgePortTcRx Counter32, etsysStpDiagMstiBridgePortTcTx Counter32, etsysStpDiagMstiBridgePortDisputedBpdu Counter32 } etsysStpDiagMstiBridgePortMstiId OBJECT-TYPE SYNTAX Unsigned32 (1..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique ID of this Multiple Spanning Tree instance. The CIST (common and internal spanning tree) is not represented in this table. There are a maximum of sixty-four MSTIs, each with a unique identifier in the range of 1-4094." REFERENCE "IEEE P802.1s/D15 clause 12.8.1.2.2" ::= { etsysStpDiagMstiBridgePortEntry 1 } etsysStpDiagMstiBridgePortRole OBJECT-TYPE SYNTAX EtsysStpPortRole MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates the port role for this port." REFERENCE "IEEE P802.1s/D15 clause 13.12" ::= { etsysStpDiagMstiBridgePortEntry 3 } etsysStpDiagMstiBridgePortConfigMsgRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received with MSTI Configuration Messages for this MSTI and port." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiBridgePortEntry 4 } etsysStpDiagMstiBridgePortConfigMsgTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted with MSTI Configuration Messages for this MSTI and port." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiBridgePortEntry 5 } etsysStpDiagMstiBridgePortTcRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs received with MSTI Configuration Messages for this MSTI and port that had the Topology Change flag set in the MSTI Flags field." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiBridgePortEntry 6 } etsysStpDiagMstiBridgePortTcTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of 802.1s BPDUs transmitted with MSTI Configuration Messages for this MSTI and port that had the Topology Change flag set in the MSTI Flags field." REFERENCE "IEEE P802.1s/D15 clause 14.6.1" ::= { etsysStpDiagMstiBridgePortEntry 7 } etsysStpDiagMstiBridgePortDisputedBpdu OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of BPDUs received on this MSTI and port with inferior designated information that have the learning flag set. These BPDU's may indicate the presence of a one way communication path between adjacent bridge ports. They can also occur as part of normal operation of a network, and may persist for a while during power up." REFERENCE "IEEE DRAFT P802.1y/D4 clause 17.19.25" ::= { etsysStpDiagMstiBridgePortEntry 8 } -- ---------------------------------------------------------- -- -- Spanning tree root history info -- ---------------------------------------------------------- -- etsysStpDiagRootHistoryTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysStpDiagRootHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains a short history of the spanning tree root bridges." ::= { etsysStpDiagRootHistory 1 } etsysStpDiagRootHistoryEntry OBJECT-TYPE SYNTAX EtsysStpDiagRootHistoryEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The date and time that a particular bridge became the root." INDEX { etsysStpDiagRootHistoryStpID, etsysStpDiagRootHistoryIndex } ::= { etsysStpDiagRootHistoryTable 1 } EtsysStpDiagRootHistoryEntry ::= SEQUENCE { etsysStpDiagRootHistoryStpID Unsigned32, etsysStpDiagRootHistoryIndex Unsigned32, etsysStpDiagRootHistoryBridgeID BridgeId, etsysStpDiagRootHistoryDateAndTime DateAndTime } etsysStpDiagRootHistoryStpID OBJECT-TYPE SYNTAX Unsigned32 (0..4094) MAX-ACCESS read-only STATUS current DESCRIPTION "The unique ID of this Spanning Tree instance. The value zero represents the CIST. There are a maximum of sixty-four MSTIs, each with a unique identifier in the range of 1-4094." REFERENCE "IEEE P802.1s/D15 clause 12.8.1.2.2" ::= { etsysStpDiagRootHistoryEntry 1 } etsysStpDiagRootHistoryIndex OBJECT-TYPE SYNTAX Unsigned32 (1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "An index for the root bridge entry. The index value of one represents the most recent entry, and the value of ten represents the oldest entry." ::= { etsysStpDiagRootHistoryEntry 2 } etsysStpDiagRootHistoryBridgeID OBJECT-TYPE SYNTAX BridgeId MAX-ACCESS read-only STATUS current DESCRIPTION "The bridge identifier of the bridge that this entry represents." REFERENCE "IEEE P802.1s/D15 clauses 12.8.1.1.3 and 12.8.1.2.3" ::= { etsysStpDiagRootHistoryEntry 3 } etsysStpDiagRootHistoryDateAndTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The date and time that this bridge became root." ::= { etsysStpDiagRootHistoryEntry 4 } -- ---------------------------------------------------------- -- -- Trap configuration -- ---------------------------------------------------------- -- etsysStpDiagDisputedBpduTrapThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "The number of disputed BPDUs that must be received on a particular port on a particular Spanning Tree instance before a disputed BPDU notification is generated. If a notification has been previously generated on behalf of this port/instance, then this object represents the number of disputed BPDUs that must be received since the prior notification before generating a subsequent notification. Setting this object to zero will cause generation of notifications to be disabled." DEFVAL { 0 } ::= { etsysStpDiagTrapConfig 1 } -- ---------------------------------------------------------- -- -- Notifications -- ---------------------------------------------------------- -- etsysStpDiagCistDisputedBpduThresholdExceeded NOTIFICATION-TYPE OBJECTS { dot1dStpPort, etsysStpDiagCistBridgePortDisputedBpdu } STATUS current DESCRIPTION "This notification indicates that the number of disputed BPDUs received by a bridge port on the CIST since the previous notification (if any) has exceeded the threshold defined by etsysStpDiagDisputedBpduTrapThreshold." ::= { etsysStpDiagNotifications 1 } etsysStpDiagMstiDisputedBpduThresholdExceeded NOTIFICATION-TYPE OBJECTS { etsysStpDiagMstiBridgePortMstiId, dot1dStpPort, etsysStpDiagMstiBridgePortDisputedBpdu } STATUS current DESCRIPTION "This notification indicates that the number of disputed BPDUs received by a bridge port on an MSTI since the previous notification (if any) has exceeded the threshold defined by etsysStpDiagDisputedBpduTrapThreshold." ::= { etsysStpDiagNotifications 2 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- etsysStpDiagConformance OBJECT IDENTIFIER ::= { etsysSpanningTreeDiagnosticMIB 2 } etsysStpDiagGroups OBJECT IDENTIFIER ::= { etsysStpDiagConformance 1 } etsysStpDiagCompliances OBJECT IDENTIFIER ::= { etsysStpDiagConformance 2 } -- ------------------------------------------------------------- -- Units of conformance -- ------------------------------------------------------------- etsysStpDiagDot1dGroup OBJECT-GROUP OBJECTS { etsysStpDiagCounterReset, etsysStpDiagCounterResetElapsedTime, etsysStpDiagCounterResetDateAndTime, etsysStpDiagTopChanges, etsysStpDiagCommonInvalidBpdu, etsysStpDiagCommonStpCfgBpduRx, etsysStpDiagCommonStpCfgBpduTx, etsysStpDiagCommonStpTcnBpduRx, etsysStpDiagCommonStpTcnBpduTx, etsysStpDiagCommonStpCfgBpduRxTcFlagSet, etsysStpDiagCommonStpCfgBpduTxTcFlagSet, etsysStpDiagCommonDisputedBpdu, etsysStpDiagMessageExpiration, etsysStpDiagCistPortNumber, etsysStpDiagCistPortRole, etsysStpDiagCistPortInvalidBpdu, etsysStpDiagCistPortStpCfgBpduRx, etsysStpDiagCistPortStpCfgBpduTx, etsysStpDiagCistPortStpTcnBpduRx, etsysStpDiagCistPortStpTcnBpduTx, etsysStpDiagCistPortStpCfgBpduRxTcFlagSet, etsysStpDiagCistPortStpCfgBpduTxTcFlagSet, etsysStpDiagCistPortDisputedBpdu, etsysStpDiagCistPortExpiration } STATUS current DESCRIPTION "A collection of objects providing support for 802.1d Spanning Tree Protocol diagnostics." ::= { etsysStpDiagGroups 1 } etsysStpDiagDot1wGroup OBJECT-GROUP OBJECTS { etsysStpDiagCommonRstBpduRx, etsysStpDiagCommonRstBpduTx, etsysStpDiagCommonRstTcRx, etsysStpDiagCommonRstTcTx, etsysStpDiagCistPortRstBpduRx, etsysStpDiagCistPortRstBpduTx, etsysStpDiagCistPortRstTcRx, etsysStpDiagCistPortRstTcTx } STATUS current DESCRIPTION "A collection of objects providing support for 802.1w Spanning Tree Protocol diagnostics." ::= { etsysStpDiagGroups 2 } etsysStpDiagDot1sGroup OBJECT-GROUP OBJECTS { etsysStpDiagCommonMstBpduRx, etsysStpDiagCommonMstBpduTx, etsysStpDiagCommonMstCistTcRx, etsysStpDiagCommonMstCistTcTx, etsysStpDiagCistPortMstBpduRx, etsysStpDiagCistPortMstBpduTx, etsysStpDiagCistPortMstCistTcRx, etsysStpDiagCistPortMstCistTcTx, etsysStpDiagCistBridgePortMstBpduRx, etsysStpDiagCistBridgePortMstBpduTx, etsysStpDiagCistBridgePortMstCistTcRx, etsysStpDiagCistBridgePortMstCistTcTx, etsysStpDiagMstiId, etsysStpDiagMstiTopChanges, etsysStpDiagMstiConfigMsgRx, etsysStpDiagMstiConfigMsgTx, etsysStpDiagMstiTcRx, etsysStpDiagMstiTcTx, etsysStpDiagMstiDisputedBpdu, etsysStpDiagMstiPortMstiId, etsysStpDiagMstiPortNumber, etsysStpDiagMstiPortTopChanges, etsysStpDiagMstiPortConfigMsgRx, etsysStpDiagMstiPortConfigMsgTx, etsysStpDiagMstiPortTcRx, etsysStpDiagMstiPortTcTx, etsysStpDiagMstiPortDisputedBpdu } STATUS current DESCRIPTION "A collection of objects providing support for 802.1s Spanning Tree Protocol diagnostics." ::= { etsysStpDiagGroups 3 } etsysStpDiagHistoryGroup OBJECT-GROUP OBJECTS { etsysStpDiagRootHistoryStpID, etsysStpDiagRootHistoryIndex, etsysStpDiagRootHistoryBridgeID, etsysStpDiagRootHistoryDateAndTime } STATUS current DESCRIPTION "A collection of objects providing historical root bridge information." ::= { etsysStpDiagGroups 4 } etsysStpDiagDot1dBridgePortGroup OBJECT-GROUP OBJECTS { etsysStpDiagCistBridgePortRole, etsysStpDiagCistBridgePortInvalidBpdu, etsysStpDiagCistBridgePortStpCfgBpduRx, etsysStpDiagCistBridgePortStpCfgBpduTx, etsysStpDiagCistBridgePortStpTcnBpduRx, etsysStpDiagCistBridgePortStpTcnBpduTx, etsysStpDiagCistBridgePortStpCfgBpduRxTcFlagSet, etsysStpDiagCistBridgePortStpCfgBpduTxTcFlagSet, etsysStpDiagCistBridgePortDisputedBpdu, etsysStpDiagCistBridgePortExpiration } STATUS current DESCRIPTION "A collection of objects providing per spanning tree level support for Spanning Tree Protocol diagnostics." ::= { etsysStpDiagGroups 5 } etsysStpDiagDot1wBridgePortGroup OBJECT-GROUP OBJECTS { etsysStpDiagCistBridgePortRstBpduRx, etsysStpDiagCistBridgePortRstBpduTx, etsysStpDiagCistBridgePortRstTcRx, etsysStpDiagCistBridgePortRstTcTx } STATUS current DESCRIPTION "A collection of objects providing per spanning tree level support for Spanning Tree Protocol diagnostics." ::= { etsysStpDiagGroups 6 } etsysStpDiagDot1sBridgePortGroup OBJECT-GROUP OBJECTS { etsysStpDiagMstiBridgePortMstiId, etsysStpDiagMstiBridgePortRole, etsysStpDiagMstiBridgePortConfigMsgRx, etsysStpDiagMstiBridgePortConfigMsgTx, etsysStpDiagMstiBridgePortTcRx, etsysStpDiagMstiBridgePortTcTx, etsysStpDiagMstiBridgePortDisputedBpdu } STATUS current DESCRIPTION "A collection of objects providing support for 802.1s Spanning Tree Protocol diagnostics." ::= { etsysStpDiagGroups 7 } etsysStpDiagTrapConfigGroup OBJECT-GROUP OBJECTS { etsysStpDiagDisputedBpduTrapThreshold } STATUS current DESCRIPTION "A collection of objects providing support for configuration of Spanning Tree Protocol diagnostic traps." ::= { etsysStpDiagGroups 8 } etsysStpDiagNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { etsysStpDiagCistDisputedBpduThresholdExceeded, etsysStpDiagMstiDisputedBpduThresholdExceeded } STATUS current DESCRIPTION "The group of Spanning Tree Protocol diagnostic notifications." ::= { etsysStpDiagGroups 9 } -- ------------------------------------------------------------- -- Compliance statements -- ------------------------------------------------------------- etsysStpDiagCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support the Spanning Tree Diagnostic MIB." MODULE MANDATORY-GROUPS { etsysStpDiagDot1dGroup } GROUP etsysStpDiagDot1dBridgePortGroup DESCRIPTION "Bridge port based counters for IEEE 802.1d implementations." GROUP etsysStpDiagDot1wGroup DESCRIPTION "Event counters for IEEE 802.1w implementations." GROUP etsysStpDiagDot1wBridgePortGroup DESCRIPTION "Bridge port based counters for IEEE 802.1w implementations." GROUP etsysStpDiagDot1sGroup DESCRIPTION "Event counters for IEEE 802.1s implementations." GROUP etsysStpDiagDot1sBridgePortGroup DESCRIPTION "Bridge port based counters for IEEE 802.1s implementations." GROUP etsysStpDiagHistoryGroup DESCRIPTION "Root bridge history information." GROUP etsysStpDiagTrapConfigGroup DESCRIPTION "Trap configuration parameters." GROUP etsysStpDiagNotificationGroup DESCRIPTION "Notifications." ::= { etsysStpDiagCompliances 1 } END