ENTERASYS-POWER-ETHERNET-EXT-MIB DEFINITIONS ::= BEGIN -- enterasys-power-ethernet-mib-ext-mib.txt -- -- Part Number: -- -- -- This module provides authoritative definitions for Enterasys -- Networks' Power Ethernet Extensions MIB. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys Networks grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in -- connection with the management of Enterasys Networks products. -- Copyright 2004-2005, 2009 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, BITS FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF Integer32, Unsigned32, Gauge32 FROM SNMPv2-SMI pethMainPseEntry, pethPsePortEntry FROM POWER-ETHERNET-MIB entPhysicalIndex FROM ENTITY-MIB EnabledStatus FROM P-BRIDGE-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsysPowerEthernetMibExtMIB MODULE-IDENTITY LAST-UPDATED "200908272031Z" -- Thu Aug 27 20:31 UTC 2009 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the SNMP MIB under the Enterasys Networks enterprise OID pertaining to the allocation of power in a Pse chassis." REVISION "200908272031Z" -- Thu Aug 27 20:31 UTC 2009 DESCRIPTION "Adding objects to support IEEE Std. 802.3at functionality. Changes to etsysPsePortPowerManagementTable: - Increased max etsysPsePortPowerLimit range to 34000. - Added etsysPsePortCapability, etsysPsePortCapabilitySelect, and etsysPsePortDetectionStatus objects." REVISION "200501101630Z" -- Mon Jan 10 16:30 GMT 2005 DESCRIPTION "Added the power management functionality." REVISION "200408172227Z" -- Tue Aug 17 22:27 GMT 2004 DESCRIPTION "The initial version of this MIB module" ::= { etsysModules 50 } -- ------------------------------------------------------------- -- MIB Objects -- ------------------------------------------------------------- etsysPowerEthernetObjects OBJECT IDENTIFIER ::= { etsysPowerEthernetMibExtMIB 1 } etsysPseChassisPowerAllocation OBJECT IDENTIFIER ::= { etsysPowerEthernetObjects 1 } etsysPseSlotPowerAllocation OBJECT IDENTIFIER ::= { etsysPowerEthernetObjects 2 } etsysPseChassisPowerStatus OBJECT IDENTIFIER ::= { etsysPowerEthernetObjects 3 } etsysPseSlotPowerManagement OBJECT IDENTIFIER ::= { etsysPowerEthernetObjects 4 } etsysPsePortPowerManagement OBJECT IDENTIFIER ::= { etsysPowerEthernetObjects 5 } etsysPsePowerNotification OBJECT IDENTIFIER ::= { etsysPowerEthernetObjects 0 } -- ------------------------------------------------------------- -- The Pse Chassis Power Allocation Group -- ------------------------------------------------------------- etsysPseChassisPowerAllocationMode OBJECT-TYPE SYNTAX INTEGER { auto (1), manual (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "In auto mode, a Pse Power Management Algorithm handles the allocation of power to all the modules. In manual mode, power is manually allocated to the modules via the etsysPseSlotPowerAllocationTable. The value of etsysPseChassisPowerAllocationAvailable is used to determine the power available for allocation in this chassis in both auto and manual mode. Maintaining the value of this object across agent reboots is REQUIRED." DEFVAL { auto } ::= { etsysPseChassisPowerAllocation 1 } etsysPseChassisPowerSnmpNotification OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The current state of the SNMP Notification functionality for Pse. enabled (1) - The Pse will generate SNMP Notifications for potentially adverse Pse power conditions. The generation of these notifications are NOT dependant upon the state of etsysPseChassisPowerAllocationMode. disabled (2) - The SNMP Notifications defined in this MIB will NOT be generated under any conditions. Agents are not required to generate SNMP Notifications for conditions that exist when this object is set to enabled. Maintaining the value of this object across agent reboots is REQUIRED." ::= { etsysPseChassisPowerAllocation 2 } etsysPseChassisPowerAvailableMaximum OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-write STATUS current DESCRIPTION "The maximum percentage of power from the Pse Power Supply that this chassis can use. The default value should be 100 percent, meaning the chassis can use all the power detected from Pse Power Supply. Maintaining the value of this object across agent reboots is REQUIRED." DEFVAL { 100 } ::= { etsysPseChassisPowerAllocation 3 } -- ------------------------------------------------------------- -- The Pse Slot Power Allocation Group -- ------------------------------------------------------------- etsysPseSlotPowerAllocationTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysPseModulePowerAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power allocation management information for all slots." ::= { etsysPseSlotPowerAllocation 1 } etsysPseSlotPowerAllocationEntry OBJECT-TYPE SYNTAX EtsysPseModulePowerAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Power allocation management information for an entPhysicalEntry that has an entPhysicalClass of container(5) and represents a slot in the chassis that could be occupied by a Pse module." INDEX { entPhysicalIndex } ::= { etsysPseSlotPowerAllocationTable 1 } EtsysPseModulePowerAllocationEntry ::= SEQUENCE { etsysPseSlotPowerMaximum Unsigned32, etsysPseSlotPowerAssigned Unsigned32 } etsysPseSlotPowerMaximum OBJECT-TYPE SYNTAX Unsigned32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum power that can be consumed by the module in this slot, based on the module's characteristics. For slots without Pse modules this object MUST return zero." ::= { etsysPseSlotPowerAllocationEntry 1 } etsysPseSlotPowerAssigned OBJECT-TYPE SYNTAX Unsigned32 UNITS "Watts" MAX-ACCESS read-write STATUS current DESCRIPTION "The power that will be allocated to this slot in manual mode. In auto mode, this object has no effect. Maintaining the value of this object across agent reboots is REQUIRED." DEFVAL { 0 } ::= { etsysPseSlotPowerAllocationEntry 2 } -- ------------------------------------------------------------- -- The Pse Chassis Power Status Group -- ------------------------------------------------------------- etsysPseChassisPowerDetected OBJECT-TYPE SYNTAX Gauge32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The total power detected by the chassis from Pse Power Supply." ::= { etsysPseChassisPowerStatus 1 } etsysPseChassisPowerAvailable OBJECT-TYPE SYNTAX Gauge32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The total power available for this chassis. This is ( etsysPseChassisPowerDetected * ( etsysPseChassisPowerAvailableMaximum / 100 ) )." ::= { etsysPseChassisPowerStatus 2 } etsysPseChassisPowerConsumable OBJECT-TYPE SYNTAX Gauge32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The total power that could be consumed by all of the Pse modules in the chassis. This is the summation of the values of all of the etsysPseSlotPowerMaximum objects." ::= { etsysPseChassisPowerStatus 3 } etsysPseChassisPowerAssigned OBJECT-TYPE SYNTAX Unsigned32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "The total power assigned to the slots in the chassis. This is the summation of the values of all of the etsysPseSlotPowerAssigned objects." ::= { etsysPseChassisPowerStatus 4 } etsysPseChassisPowerRedundancy OBJECT-TYPE SYNTAX INTEGER { redundant (1), notRedundant (2), notSupported (3) -- Object is not supported } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes whether or not the Pse power system has redundant capacity." ::= { etsysPseChassisPowerStatus 5 } -- ------------------------------------------------------------- -- The Pse Module Power Management Group -- ------------------------------------------------------------- etsysPseModulePowerManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysPseModulePowerManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table augments the pethMainPseTable of the PowerEthernetMIB (rfc3621). It provides objects that are used to budget power." ::= { etsysPseSlotPowerManagement 1 } etsysPseModulePowerManagementEntry OBJECT-TYPE SYNTAX EtsysPseModulePowerManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display, control, and calculate the power consumption of a PSE." AUGMENTS { pethMainPseEntry } ::= { etsysPseModulePowerManagementTable 1 } EtsysPseModulePowerManagementEntry ::= SEQUENCE { etsysPseModulePowerMode INTEGER, etsysPseModulePowerClassBudget Gauge32, etsysPseModulePowerUsage Integer32 } etsysPseModulePowerMode OBJECT-TYPE SYNTAX INTEGER { realtime (1), class (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the power management of the PSE. It also controls how etsysPseModulePowerClassBudget, etsysPseModulePowerUsage and etsysPsePortPowerLimit are utilized. In realtime mode, the power is managed based on the actual power consumption of the ports. etsysPseModulePowerClassBudget is sum of power consumed by all ports, measured in real-time. The etsysPseModulePowerUsage is ratio of pethMainPseConsumptionPower over pethMainPsePower, expressed in percents. In class mode, the power is managed based on the IEEE 802.3af definition of the class upper limit, except classes 0 & 4 for which the actual power consumption is used. etsysPseModulePowerClassBudget is sum of all ports power according to their class upper bound, except classes 0 & 4 for which the actual power consumption is accounted. The etsysPseModulePowerUsage is ratio of etsysPseModulePowerClassBudget over pethMainPsePower, expressed in percents. The effect of etsysPseModulePowerMode to etsysPsePortPowerLimit is described in etsysPsePortPowerLimit definition. Maintaining the value of this object across agent reboots is REQUIRED." DEFVAL { realtime } ::= { etsysPseModulePowerManagementEntry 1 } etsysPseModulePowerClassBudget OBJECT-TYPE SYNTAX Gauge32 UNITS "Watts" MAX-ACCESS read-only STATUS current DESCRIPTION "In class mode, this is sum of all ports power according to their class upper bound, except classes 0 & 4 for which the actual power consumption is accounted. In realtime mode, this is sum of power consumed by all ports, measured in real-time." ::= { etsysPseModulePowerManagementEntry 2 } etsysPseModulePowerUsage OBJECT-TYPE SYNTAX Integer32 (0..100) UNITS "%" MAX-ACCESS read-only STATUS current DESCRIPTION "In class mode, this is ratio of etsysPseModulePowerClassBudget over pethMainPsePower, expressed in percents. In realtime mode, this is ratio of pethMainPseConsumptionPower over pethMainPsePower, expressed in percents." ::= { etsysPseModulePowerManagementEntry 3 } -- ------------------------------------------------------------- -- The Pse Port Power Management Group -- ------------------------------------------------------------- etsysPsePortPowerManagementTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysPsePortPowerManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table augments the pethPsePortTable of the PowerEthernetMIB (rfc3621). It provides objects that are used to budget power." ::= { etsysPsePortPowerManagement 1 } etsysPsePortPowerManagementEntry OBJECT-TYPE SYNTAX EtsysPsePortPowerManagementEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A set of objects that display and control the power consumption of a PSE, at the port level." AUGMENTS { pethPsePortEntry } ::= { etsysPsePortPowerManagementTable 1 } EtsysPsePortPowerManagementEntry ::= SEQUENCE { etsysPsePortPowerLimit Integer32, etsysPsePortPowerUsage Gauge32, etsysPsePortPDType INTEGER, etsysPsePortCapability BITS, etsysPsePortCapabilitySelect INTEGER, etsysPsePortDetectionStatus INTEGER } etsysPsePortPowerLimit OBJECT-TYPE SYNTAX Integer32 (0..34000) UNITS "milliwatts" MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets the maximum power allowed on this port. If the port exceeds its power limit, it will be shut down. This object has effect only when its module is in realtime mode (specified by etsysPseModulePowerMode). In class mode, the power limit of a port is defined by port's class upper bound, according to the IEEE standard selected in etsysPsePortCapabilitySelect." DEFVAL { 15400 } ::= { etsysPsePortPowerManagementEntry 1 } etsysPsePortPowerUsage OBJECT-TYPE SYNTAX Gauge32 UNITS "milliwatts" MAX-ACCESS read-only STATUS current DESCRIPTION "Actual power consumption measured in real-time." ::= { etsysPsePortPowerManagementEntry 2 } etsysPsePortPDType OBJECT-TYPE SYNTAX INTEGER { legacy (1), ieee8023af (2), other (3), ieee8023 (4), ieee8023at (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the detected PD type on this port. A value of legacy(1) - indicates that the PD is using a capacitive signature, which is pre-IEEE standard. A value of ieee8023af(2)- indicates that the PD is using a resistive signature and is compliant with the IEEE Std 802.3af. A value of other(3) - indicates that the PD type could not be determined. A value of ieee8023(4)- indicates that the PD is using a resistive signature and is compliant with the IEEE Std 802.3af and/or IEEE Std 802.3at specifications. A value of ieee8023at(5)- indicates that the PD is using a resistive signature and is compliant with the IEEE Std 802.3at." REFERENCE "IEEE Std 802.3af IEEE Std 802.3at" ::= { etsysPsePortPowerManagementEntry 3 } etsysPsePortCapability OBJECT-TYPE SYNTAX BITS { other(0), ieee8023afCapable(1), ieee8023atCapable(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This object indicates the IEEE Power over Ethernet standard this port supports." REFERENCE "IEEE Std 802.3af IEEE Std 802.3at" ::= { etsysPsePortPowerManagementEntry 4 } etsysPsePortCapabilitySelect OBJECT-TYPE SYNTAX INTEGER { ieee8023af (1), ieee8023at (2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object sets the port's power management capabilities based on the IEEE standard. ieee8023af (1) : IEEE Std 802.3af ieee8023at (2) : IEEE Std 802.3at Attempting to set this value to a capability that is not supported, as indicated by etsysPsePortCapability, will result in an inconsistentValue error." REFERENCE "IEEE Std 802.3af IEEE Std 802.3at" DEFVAL { ieee8023af } ::= { etsysPsePortPowerManagementEntry 5 } etsysPsePortDetectionStatus OBJECT-TYPE SYNTAX INTEGER { disabled(1), searching(2), deliveringPower(3), fault(4), test(5), otherFault(6), requestingPower(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Describes the operational status of the port PD detection. A value of disabled(1)- indicates that the PSE State diagram is in the state DISABLED. A value of deliveringPower(3) - indicates that the PSE State diagram is in the state POWER_ON for a duration greater than tlim max. A value of fault(4) - indicates that the PSE State diagram is in the state TEST_ERROR. A value of test(5) - indicates that the PSE State diagram is in the state TEST_MODE. A value of otherFault(6) - indicates that the PSE State diagram is in the state IDLE due to the variable error_conditions. A value of searching(2)- indicates the PSE State diagram is in a state other than those listed above. A value of requestingPower(7) - indicates the PSE State diagram is in the state IDLE after transitioning from the state POWER_DENIED due to insufficient PSE power being available to satisfy the PD's requirements." ::= { etsysPsePortPowerManagementEntry 6 } -- ------------------------------------------------------------- -- The Pse Power Supply Status Table -- ------------------------------------------------------------- etsysPsePowerSupplyStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysPsePowerSupplyStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status information for all of the Pse power supply modules." ::= { etsysPseChassisPowerStatus 6 } etsysPsePowerSupplyStatusEntry OBJECT-TYPE SYNTAX EtsysPsePowerSupplyStatusEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Status information for an individual Pse power supply module." INDEX { etsysPsePowerSupplyModuleNumber } ::= { etsysPsePowerSupplyStatusTable 1 } EtsysPsePowerSupplyStatusEntry ::= SEQUENCE { etsysPsePowerSupplyModuleNumber Unsigned32, etsysPsePowerSupplyModuleStatus INTEGER } etsysPsePowerSupplyModuleNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique number that identifies the Pse power supply and is relative to the module's physical location." ::= { etsysPsePowerSupplyStatusEntry 1 } etsysPsePowerSupplyModuleStatus OBJECT-TYPE SYNTAX INTEGER { infoNotAvailable (1), notInstalled (2), installedAndOperating (3), installedAndNotOperating (4) } MAX-ACCESS read-only STATUS current DESCRIPTION "Denotes the power supply's status." ::= { etsysPsePowerSupplyStatusEntry 2 } -- ------------------------------------------------------------- -- The Pse Power Notifications Group -- ------------------------------------------------------------- etsysPseChassisPowerRedundant NOTIFICATION-TYPE OBJECTS { etsysPseChassisPowerDetected } STATUS current DESCRIPTION "Pse chassis power is in redundant state. At least 500 msec must elapse between notifications being emitted by the same object instance." ::= { etsysPsePowerNotification 1 } etsysPseChassisPowerNonRedundant NOTIFICATION-TYPE OBJECTS { etsysPseChassisPowerDetected } STATUS current DESCRIPTION "Pse chassis power is in non-redundant state. At least 500 msec must elapse between notifications being emitted by the same object instance." ::= { etsysPsePowerNotification 2 } etsysPsePowerSupplyModuleStatusChange NOTIFICATION-TYPE OBJECTS { etsysPsePowerSupplyModuleStatus } STATUS current DESCRIPTION "A Pse Power Supply module has changed state. At least 500 msec must elapse between notifications being emitted by the same object instance." ::= { etsysPsePowerNotification 3 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- etsysPsePowerAllocationConformance OBJECT IDENTIFIER ::= { etsysPowerEthernetMibExtMIB 2 } etsysPsePowerAllocationGroups OBJECT IDENTIFIER ::= { etsysPsePowerAllocationConformance 1 } etsysPsePowerAllocationCompliances OBJECT IDENTIFIER ::= { etsysPsePowerAllocationConformance 2 } -- ------------------------------------------------------------- -- Units of conformance -- ------------------------------------------------------------- etsysPsePowerAllocationControlGroup OBJECT-GROUP OBJECTS { etsysPseChassisPowerAllocationMode, etsysPseChassisPowerSnmpNotification, etsysPseChassisPowerAvailableMaximum, etsysPseSlotPowerMaximum, etsysPseSlotPowerAssigned } STATUS current DESCRIPTION "Power over Ethernet Power Allocation Control group." ::= { etsysPsePowerAllocationGroups 1 } etsysPseChassisPowerStatusGroup OBJECT-GROUP OBJECTS { etsysPseChassisPowerDetected, etsysPseChassisPowerAvailable, etsysPseChassisPowerConsumable, etsysPseChassisPowerAssigned, etsysPseChassisPowerRedundancy, etsysPsePowerSupplyModuleStatus } STATUS current DESCRIPTION "Power over Ethernet Power Supply group." ::= { etsysPsePowerAllocationGroups 2 } etsysPsePowerNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { etsysPseChassisPowerRedundant, etsysPseChassisPowerNonRedundant, etsysPsePowerSupplyModuleStatusChange } STATUS current DESCRIPTION "Power over Ethernet Power Redundancy Notifications group." ::= { etsysPsePowerAllocationGroups 3 } etsysPseModulePowerManagementGroup OBJECT-GROUP OBJECTS { etsysPseModulePowerMode, etsysPseModulePowerClassBudget, etsysPseModulePowerUsage } STATUS current DESCRIPTION "Power over Ethernet Module Power Budget Management group." ::= { etsysPsePowerAllocationGroups 4 } etsysPsePortPowerManagementGroup OBJECT-GROUP OBJECTS { etsysPsePortPowerLimit, etsysPsePortPowerUsage, etsysPsePortPDType } STATUS deprecated DESCRIPTION "Power over Ethernet Port Power Budget Management group." ::= { etsysPsePowerAllocationGroups 5 } etsysPsePortPowerManagementGroupRev2 OBJECT-GROUP OBJECTS { etsysPsePortPowerLimit, etsysPsePortPowerUsage, etsysPsePortPDType, etsysPsePortCapability, etsysPsePortCapabilitySelect, etsysPsePortDetectionStatus } STATUS current DESCRIPTION "Power over Ethernet Port Power Budget Management group." ::= { etsysPsePowerAllocationGroups 6 } -- ------------------------------------------------------------- -- Compliance statements -- ------------------------------------------------------------- etsysPsePowerAllocationCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support manual power allocation." MODULE MANDATORY-GROUPS { etsysPsePowerAllocationControlGroup, etsysPseChassisPowerStatusGroup, etsysPsePowerNotificationGroup } ::= { etsysPsePowerAllocationCompliances 1 } etsysPsePowerAllocationCompliance2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for devices that support power budgets." MODULE MANDATORY-GROUPS { etsysPsePowerAllocationControlGroup, etsysPseChassisPowerStatusGroup, etsysPsePowerNotificationGroup } GROUP etsysPseModulePowerManagementGroup DESCRIPTION "This group is conditionally mandatory for entities that support power management on a per module basis." GROUP etsysPsePortPowerManagementGroup DESCRIPTION "This group is conditionally mandatory for entities that support power management on a per port basis." ::= { etsysPsePowerAllocationCompliances 2 } etsysPsePowerAllocationCompliance2Rev2 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support power budgets." MODULE MANDATORY-GROUPS { etsysPsePowerAllocationControlGroup, etsysPseChassisPowerStatusGroup, etsysPsePowerNotificationGroup } GROUP etsysPseModulePowerManagementGroup DESCRIPTION "This group is conditionally mandatory for entities that support power management on a per module basis." GROUP etsysPsePortPowerManagementGroupRev2 DESCRIPTION "This group is conditionally mandatory for entities that support power management on a per port basis." ::= { etsysPsePowerAllocationCompliances 3 } END