ENTERASYS-MULTI-USER-8021X-MIB DEFINITIONS ::= BEGIN -- This module provides authoritative definitions for Enterasys -- Networks' Multi User 802.1X MIB module. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys Networks grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in -- connection with the management of Enterasys Networks products. -- Copyright August, 2004 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Unsigned32, TimeTicks FROM SNMPv2-SMI TruthValue, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF SnmpAdminString FROM SNMP-FRAMEWORK-MIB dot1xPaePortNumber FROM IEEE8021-PAE-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsysMultiUser8021xMIB MODULE-IDENTITY LAST-UPDATED "200411111531Z" -- Thu Nov 11 15:31 GMT 2004 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to Multi-User IEEE 802.1X authentication. This MIB is designed to supplement and be used in connection with the standard IEEE 802.1X-2001 MIB." REVISION "200411111531Z" -- Thu Nov 11 15:31 GMT 2004 DESCRIPTION "The initial version of this MIB module." ::= { etsysModules 53 } -- ------------------------------------------------------------- -- Branches of the Enterasys 802.1X Extensions MIB -- ------------------------------------------------------------- etsysMultiUser8021xObjects OBJECT IDENTIFIER ::= { etsysMultiUser8021xMIB 1 } etsysMultiUser8021xSystem OBJECT IDENTIFIER ::= { etsysMultiUser8021xObjects 1 } etsysMultiUser8021xAccessEntity OBJECT IDENTIFIER ::= { etsysMultiUser8021xObjects 2 } -- ------------------------------------------------------------- -- The 802.1X Access Entity Table -- ------------------------------------------------------------- etsysMulti1xAccessEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysMulti1xAccessEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system and configuration information for all the Access Entities." REFERENCE "9.6.1" ::= { etsysMultiUser8021xAccessEntity 1 } etsysMulti1xAccessEntityEntry OBJECT-TYPE SYNTAX EtsysMulti1xAccessEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The system and configuration information for an individual Access Entity." INDEX { dot1xPaePortNumber, etsysMulti1xAeIndex } ::= { etsysMulti1xAccessEntityTable 1 } EtsysMulti1xAccessEntityEntry ::= SEQUENCE { etsysMulti1xAeIndex Unsigned32, etsysMulti1xAeActive TruthValue, etsysMulti1xAeState INTEGER, etsysMulti1xAeBackendAuthState INTEGER, etsysMulti1xAeInitialize TruthValue, etsysMulti1xAeReauthenticate TruthValue, etsysMulti1xAeReAuthPeriod Unsigned32, etsysMulti1xAeSupplicantAddress MacAddress, etsysMulti1xAeUserName SnmpAdminString } etsysMulti1xAeIndex OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Indicates if this Access Entity is currently active." ::= { etsysMulti1xAccessEntityEntry 1 } etsysMulti1xAeActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this Access Entity is currently active." ::= { etsysMulti1xAccessEntityEntry 2 } etsysMulti1xAeState OBJECT-TYPE SYNTAX INTEGER { initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the Access Entity state machine." REFERENCE "9.4.1, Authenticator PAE state" ::= { etsysMulti1xAccessEntityEntry 3 } etsysMulti1xAeBackendAuthState OBJECT-TYPE SYNTAX INTEGER { request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Backend Authentication state machine." REFERENCE "9.4.1, Backend Authentication state" ::= { etsysMulti1xAccessEntityEntry 4 } etsysMulti1xAeInitialize OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The initialization control for this Access Entity. Setting this attribute TRUE causes the Access Entity to be initialized. The attribute value reverts to FALSE once initialization has completed." REFERENCE "9.6.1.2, Initialize Port" ::= { etsysMulti1xAccessEntityEntry 5 } etsysMulti1xAeReauthenticate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The reauthentication control for this Access Entity. Setting this attribute TRUE causes the Access Entity state machine to reauthenticate the Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read." REFERENCE "9.4.1.3 Reauthenticate" ::= { etsysMulti1xAccessEntityEntry 6 } etsysMulti1xAeReAuthPeriod OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine." REFERENCE "9.4.1, reAuthPeriod" DEFVAL { 3600 } ::= { etsysMulti1xAccessEntityEntry 7 } etsysMulti1xAeSupplicantAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address that this Access Entity is currently bound to." ::= { etsysMulti1xAccessEntityEntry 8 } etsysMulti1xAeUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The User-Name representing the identity of the Supplicant PAE." REFERENCE "9.4.4, Session User Name" ::= { etsysMulti1xAccessEntityEntry 9 } -- ------------------------------------------------------------- -- The 802.1X Access Entity Statistics Table -- ------------------------------------------------------------- etsysMulti1xAccessEntityStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysMulti1xAccessEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics objects for the all the Access Entities." REFERENCE "9.4.2 Authenticator Statistics" ::= { etsysMultiUser8021xAccessEntity 2 } etsysMulti1xAccessEntityStatsEntry OBJECT-TYPE SYNTAX EtsysMulti1xAccessEntityStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics information for an individual Access Entity." AUGMENTS { etsysMulti1xAccessEntityEntry } ::= { etsysMulti1xAccessEntityStatsTable 1 } EtsysMulti1xAccessEntityStatsEntry ::= SEQUENCE { etsysMulti1xAeEapolFramesRx Counter32, etsysMulti1xAeEapolFramesTx Counter32, etsysMulti1xAeEapolStartFramesRx Counter32, etsysMulti1xAeEapolLogoffFramesRx Counter32, etsysMulti1xAeEapolRespIdFramesRx Counter32, etsysMulti1xAeEapolRespFramesRx Counter32, etsysMulti1xAeEapolReqIdFramesTx Counter32, etsysMulti1xAeEapolReqFramesTx Counter32, etsysMulti1xAeInvalidEapolFramesRx Counter32, etsysMulti1xAeEapLengthErrorFramesRx Counter32, etsysMulti1xAeEapolFrameVersion Unsigned32, etsysMulti1xAeEapolFrameSource MacAddress } etsysMulti1xAeEapolFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by this Access Entity." REFERENCE "9.4.2, EAPOL frames received" ::= { etsysMulti1xAccessEntityStatsEntry 1 } etsysMulti1xAeEapolFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by this Access Entity." REFERENCE "9.4.2, EAPOL frames transmitted" ::= { etsysMulti1xAccessEntityStatsEntry 2 } etsysMulti1xAeEapolStartFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by this Access Entity." REFERENCE "9.4.2, EAPOL Start frames received" ::= { etsysMulti1xAccessEntityStatsEntry 3 } etsysMulti1xAeEapolLogoffFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Logoff frames that have been received by this Access Entity." REFERENCE "9.4.2, EAPOL Logoff frames received" ::= { etsysMulti1xAccessEntityStatsEntry 4 } etsysMulti1xAeEapolRespIdFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Resp/Id frames that have been received by this Access Entity." REFERENCE "9.4.2, EAPOL Resp/Id frames received" ::= { etsysMulti1xAccessEntityStatsEntry 5 } etsysMulti1xAeEapolRespFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Access Entity." REFERENCE "9.4.2, EAPOL Response frames received" ::= { etsysMulti1xAccessEntityStatsEntry 6 } etsysMulti1xAeEapolReqIdFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Req/Id frames that have been transmitted by this Access Entity." REFERENCE "9.4.2, EAPOL Req/Id frames transmitted" ::= { etsysMulti1xAccessEntityStatsEntry 7 } etsysMulti1xAeEapolReqFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Access Entity." REFERENCE "9.4.2, EAPOL Request frames transmitted" ::= { etsysMulti1xAccessEntityStatsEntry 8 } etsysMulti1xAeInvalidEapolFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by this Access Entity in which the frame type is not recognized." REFERENCE "9.4.2, Invalid EAPOL frames received" ::= { etsysMulti1xAccessEntityStatsEntry 9 } etsysMulti1xAeEapLengthErrorFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by this Access Entity in which the Packet Body Length field is invalid." REFERENCE "9.4.2, EAP length error frames received" ::= { etsysMulti1xAccessEntityStatsEntry 10 } etsysMulti1xAeEapolFrameVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol version number carried in the most recently received EAPOL frame." REFERENCE "9.4.2, Last EAPOL frame version" ::= { etsysMulti1xAccessEntityStatsEntry 11 } etsysMulti1xAeEapolFrameSource OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The source MAC address carried in the most recently received EAPOL frame." REFERENCE "9.4.2, Last EAPOL frame source" ::= { etsysMulti1xAccessEntityStatsEntry 12 } -- ------------------------------------------------------------- -- The 802.1X Access Entity Diagnostic Table -- ------------------------------------------------------------- etsysMulti1xAeDiagTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysMulti1xAeDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The diagnostics objects for all the Access Entities." REFERENCE "9.4.3 Authenticator Diagnostics" ::= { etsysMultiUser8021xAccessEntity 3 } etsysMulti1xAeDiagEntry OBJECT-TYPE SYNTAX EtsysMulti1xAeDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The diagnostics information for an individual Access Entity." AUGMENTS { etsysMulti1xAccessEntityEntry } ::= { etsysMulti1xAeDiagTable 1 } EtsysMulti1xAeDiagEntry ::= SEQUENCE { etsysMulti1xAeEntersConnecting Counter32, etsysMulti1xAeEapLogoffsWhileConnecting Counter32, etsysMulti1xAeEntersAuthenticating Counter32, etsysMulti1xAeAuthSuccessWhileAuthenticating Counter32, etsysMulti1xAeAuthTimeoutsWhileAuthenticating Counter32, etsysMulti1xAeAuthFailWhileAuthenticating Counter32, etsysMulti1xAeAuthReauthsWhileAuthenticating Counter32, etsysMulti1xAeAuthEapStartsWhileAuthenticating Counter32, etsysMulti1xAeAuthEapLogoffWhileAuthenticating Counter32, etsysMulti1xAeAuthReauthsWhileAuthenticated Counter32, etsysMulti1xAeAuthEapStartsWhileAuthenticated Counter32, etsysMulti1xAeAuthEapLogoffWhileAuthenticated Counter32, etsysMulti1xAeBackendResponses Counter32, etsysMulti1xAeBackendAccessChallenges Counter32, etsysMulti1xAeBackendOtherRequestsToSupplicant Counter32, etsysMulti1xAeBackendNonNakResponsesFromSupplicant Counter32, etsysMulti1xAeBackendAuthSuccesses Counter32, etsysMulti1xAeBackendAuthFails Counter32 } etsysMulti1xAeEntersConnecting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions to the CONNECTING state from any other state." REFERENCE "9.4.2, 8.5.4.2.1" ::= { etsysMulti1xAeDiagEntry 1 } etsysMulti1xAeEapLogoffsWhileConnecting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message." REFERENCE "9.4.2, 8.5.4.2.2" ::= { etsysMulti1xAeDiagEntry 2 } etsysMulti1xAeEntersAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant." REFERENCE "9.4.2, 8.5.4.2.3" ::= { etsysMulti1xAeDiagEntry 3 } etsysMulti1xAeAuthSuccessWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE)." REFERENCE "9.4.2, 8.5.4.2.4" ::= { etsysMulti1xAeDiagEntry 4 } etsysMulti1xAeAuthTimeoutsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE)." REFERENCE "9.4.2, 8.5.4.2.5" ::= { etsysMulti1xAeDiagEntry 5 } etsysMulti1xAeAuthFailWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE)." REFERENCE "9.4.2, 8.5.4.2.6" ::= { etsysMulti1xAeDiagEntry 6 } etsysMulti1xAeAuthReauthsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE)." REFERENCE "9.4.2, 8.5.4.2.7" ::= { etsysMulti1xAeDiagEntry 7 } etsysMulti1xAeAuthEapStartsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant." REFERENCE "9.4.2, 8.5.4.2.8" ::= { etsysMulti1xAeDiagEntry 8 } etsysMulti1xAeAuthEapLogoffWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant." REFERENCE "9.4.2, 8.5.4.2.9" ::= { etsysMulti1xAeDiagEntry 9 } etsysMulti1xAeAuthReauthsWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE)." REFERENCE "9.4.2, 8.5.4.2.10" ::= { etsysMulti1xAeDiagEntry 10 } etsysMulti1xAeAuthEapStartsWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant." REFERENCE "9.4.2, 8.5.4.2.11" ::= { etsysMulti1xAeDiagEntry 11 } etsysMulti1xAeAuthEapLogoffWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant." REFERENCE "9.4.2, 8.5.4.2.12" ::= { etsysMulti1xAeDiagEntry 12 } etsysMulti1xAeBackendResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server." REFERENCE "9.4.2, 8.5.6.2.1" ::= { etsysMulti1xAeDiagEntry 13 } etsysMulti1xAeBackendAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator." REFERENCE "9.4.2, 8.5.6.2.2" ::= { etsysMulti1xAeDiagEntry 14 } etsysMulti1xAeBackendOtherRequestsToSupplicant OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method." REFERENCE "9.4.2, 8.5.6.2.3" ::= { etsysMulti1xAeDiagEntry 15 } etsysMulti1xAeBackendNonNakResponsesFromSupplicant OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method." REFERENCE "9.4.2, 8.5.6.2.4" ::= { etsysMulti1xAeDiagEntry 16 } etsysMulti1xAeBackendAuthSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server." REFERENCE "9.4.2, 8.5.6.2.5" ::= { etsysMulti1xAeDiagEntry 17 } etsysMulti1xAeBackendAuthFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server." REFERENCE "9.4.2, 8.5.6.2.6" ::= { etsysMulti1xAeDiagEntry 18 } -- ---------------------------------------------------------- -- -- The 802.1X Session Statistics Table -- ---------------------------------------------------------- -- etsysMulti1xSessionStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysMulti1xSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The session statistics for all the Access Entities." REFERENCE "9.4.4" ::= { etsysMultiUser8021xAccessEntity 4 } etsysMulti1xSessionStatsEntry OBJECT-TYPE SYNTAX EtsysMulti1xSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The session statistics for an individual Access Entity. This shows the current values being collected for each session that is still in progress, or the final values for the last valid session on each Access Entity where there is no session currently active." AUGMENTS { etsysMulti1xAccessEntityEntry } ::= { etsysMulti1xSessionStatsTable 1 } EtsysMulti1xSessionStatsEntry ::= SEQUENCE { etsysMulti1xSessionOctetsRx Counter64, etsysMulti1xSessionOctetsTx Counter64, etsysMulti1xSessionFramesRx Counter32, etsysMulti1xSessionFramesTx Counter32, etsysMulti1xSessionId SnmpAdminString, etsysMulti1xSessionAuthenticMethod INTEGER, etsysMulti1xSessionTime TimeTicks, etsysMulti1xSessionTerminateCause INTEGER, etsysMulti1xSessionUserName SnmpAdminString, etsysMulti1xSessionActive TruthValue } etsysMulti1xSessionOctetsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of user data received on this port for this session." REFERENCE "9.4.4, Session Octets Received" ::= { etsysMulti1xSessionStatsEntry 1 } etsysMulti1xSessionOctetsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets of user data transmitted on this port for this session." REFERENCE "9.4.4, Session Octets Transmitted" ::= { etsysMulti1xSessionStatsEntry 2 } etsysMulti1xSessionFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user data frames received on this port for this session." REFERENCE "9.4.4, Session Frames Received" ::= { etsysMulti1xSessionStatsEntry 3 } etsysMulti1xSessionFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user data frames transmitted on this port for this session." REFERENCE "9.4.4, Session Frames Transmitted" ::= { etsysMulti1xSessionStatsEntry 4 } etsysMulti1xSessionId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the session, in the form of a printable ASCII string of at least three characters." REFERENCE "9.4.4, Session Identifier" ::= { etsysMulti1xSessionStatsEntry 5 } etsysMulti1xSessionAuthenticMethod OBJECT-TYPE SYNTAX INTEGER { remoteAuthServer(1), localAuthServer(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication method used to establish the session." REFERENCE "9.4.4, Session Authentication Method" ::= { etsysMulti1xSessionStatsEntry 6 } etsysMulti1xSessionTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The duration of the session in seconds." REFERENCE "9.4.4, Session Time" ::= { etsysMulti1xSessionStatsEntry 7 } etsysMulti1xSessionTerminateCause OBJECT-TYPE SYNTAX INTEGER { supplicantLogoff(1), portFailure(2), supplicantRestart(3), reauthFailed(4), authControlForceUnauth(5), portReInit(6), portAdminDisabled(7), notTerminatedYet(999) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the session termination." REFERENCE "9.4.4, Session Terminate Cause" ::= { etsysMulti1xSessionStatsEntry 8 } etsysMulti1xSessionUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The User-Name representing the identity of the Supplicant PAE." REFERENCE "9.4.4, Session User Name" ::= { etsysMulti1xSessionStatsEntry 9 } etsysMulti1xSessionActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if this session is currently active." ::= { etsysMulti1xSessionStatsEntry 10 } -- ---------------------------------------------------------- -- -- The 802.1X Supplicant Address Table -- ---------------------------------------------------------- -- etsysMulti1xSupplicantAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysMulti1xSupplicantAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Access Entities relative to the supplicant MAC address, port, and access entity index." ::= { etsysMultiUser8021xAccessEntity 5 } etsysMulti1xSupplicantAddressEntry OBJECT-TYPE SYNTAX EtsysMulti1xSupplicantAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Some basic information about an individual Access Entity." INDEX { etsysMulti1xAeSupplicantAddress, dot1xPaePortNumber, etsysMulti1xAeIndex } ::= { etsysMulti1xSupplicantAddressTable 1 } EtsysMulti1xSupplicantAddressEntry ::= SEQUENCE { etsysMulti1xSupplicantActive INTEGER, etsysMulti1xSupplicantUserName SnmpAdminString } etsysMulti1xSupplicantActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the associated Access Entity is currently active." ::= { etsysMulti1xSupplicantAddressEntry 1 } etsysMulti1xSupplicantUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The User-Name representing the identity of the Supplicant PAE." REFERENCE "9.4.4, Session User Name" ::= { etsysMulti1xSupplicantAddressEntry 2 } -- ------------------------------------------------------------- -- The 802.1X User Name Table -- ------------------------------------------------------------- etsysMulti1xUserNameTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysMulti1xUserNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The Access Entities relative to the supplicant user name, or the initial part of the supplicant user name, port, and access entity index." ::= { etsysMultiUser8021xAccessEntity 6 } etsysMulti1xUserNameEntry OBJECT-TYPE SYNTAX EtsysMulti1xUserNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Some basic information about an individual Access Entity." INDEX { etsysMulti1xUserNameIndex, dot1xPaePortNumber, etsysMulti1xAeIndex } ::= { etsysMulti1xUserNameTable 1 } EtsysMulti1xUserNameEntry ::= SEQUENCE { etsysMulti1xUserNameIndex SnmpAdminString, etsysMulti1xUserName SnmpAdminString, etsysMulti1xUserActive TruthValue, etsysMulti1xUserAddress MacAddress } etsysMulti1xUserNameIndex OBJECT-TYPE SYNTAX SnmpAdminString ( SIZE( 8 ) ) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The fixed length equivalent of the etsysMulti1xUserName object. When the length of the corresponding etsysMulti1xUserName object is less then 8 octets this object is padded with null octets. When the length of the corresponding etsysMulti1xUserName object is greater than 8 octets this object has the value of the etsysMulti1xUserName object truncated to 20 octets." ::= { etsysMulti1xUserNameEntry 1 } etsysMulti1xUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The User-Name representing the identity of the Supplicant PAE." REFERENCE "9.4.4, Session User Name" ::= { etsysMulti1xUserNameEntry 2 } etsysMulti1xUserActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates if the associated Access Entity is currently active." ::= { etsysMulti1xUserNameEntry 3 } etsysMulti1xUserAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The User-Name representing the identity of the Supplicant PAE." REFERENCE "9.4.4, Session User Name" ::= { etsysMulti1xUserNameEntry 4 } -- ------------------------------------------------------------- -- The 802.1X Active Access Entity Table -- ------------------------------------------------------------- etsysMulti1xActiveAccessEntityTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysMulti1xActiveAccessEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The active Access Entities." REFERENCE "9.6.1" ::= { etsysMultiUser8021xAccessEntity 7 } etsysMulti1xActiveAccessEntityEntry OBJECT-TYPE SYNTAX EtsysMulti1xActiveAccessEntityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An individual active Access Entity." INDEX { dot1xPaePortNumber, etsysMulti1xAeIndex } ::= { etsysMulti1xActiveAccessEntityTable 1 } EtsysMulti1xActiveAccessEntityEntry ::= SEQUENCE { etsysMulti1xActiveSupplicantAddress MacAddress } etsysMulti1xActiveSupplicantAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address that this active Access Entity is currently bound to." ::= { etsysMulti1xActiveAccessEntityEntry 1 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- etsysMultiUser8021xConformance OBJECT IDENTIFIER ::= { etsysMultiUser8021xMIB 2 } etsysMultiUser8021xGroups OBJECT IDENTIFIER ::= { etsysMultiUser8021xConformance 1 } etsysMultiUser8021xCompliances OBJECT IDENTIFIER ::= { etsysMultiUser8021xConformance 2 } -- ------------------------------------------------------------- -- Units of conformance -- ------------------------------------------------------------- etsysMultiUser8021xAccessEntityGroup OBJECT-GROUP OBJECTS { etsysMulti1xAeActive, etsysMulti1xAeState, etsysMulti1xAeBackendAuthState, etsysMulti1xAeInitialize, etsysMulti1xAeReauthenticate, etsysMulti1xAeReAuthPeriod, etsysMulti1xAeSupplicantAddress, etsysMulti1xAeUserName } STATUS current DESCRIPTION "A collection of objects providing system and configuration information for all the Access Entities running on all the ports." ::= { etsysMultiUser8021xGroups 1 } etsysMultiUser8021xAccessEntityStatsGroup OBJECT-GROUP OBJECTS { etsysMulti1xAeEapolFramesRx, etsysMulti1xAeEapolFramesTx, etsysMulti1xAeEapolStartFramesRx, etsysMulti1xAeEapolLogoffFramesRx, etsysMulti1xAeEapolRespIdFramesRx, etsysMulti1xAeEapolRespFramesRx, etsysMulti1xAeEapolReqIdFramesTx, etsysMulti1xAeEapolReqFramesTx, etsysMulti1xAeInvalidEapolFramesRx, etsysMulti1xAeEapLengthErrorFramesRx, etsysMulti1xAeEapolFrameVersion, etsysMulti1xAeEapolFrameSource } STATUS current DESCRIPTION "A collection of objects providing statistics information for all the Access Entities running on all the ports." ::= { etsysMultiUser8021xGroups 2 } etsysMultiUser8021xAccessEntityDiagGroup OBJECT-GROUP OBJECTS { etsysMulti1xAeEntersConnecting, etsysMulti1xAeEapLogoffsWhileConnecting, etsysMulti1xAeEntersAuthenticating, etsysMulti1xAeAuthSuccessWhileAuthenticating, etsysMulti1xAeAuthTimeoutsWhileAuthenticating, etsysMulti1xAeAuthFailWhileAuthenticating, etsysMulti1xAeAuthReauthsWhileAuthenticating, etsysMulti1xAeAuthEapStartsWhileAuthenticating, etsysMulti1xAeAuthEapLogoffWhileAuthenticating, etsysMulti1xAeAuthReauthsWhileAuthenticated, etsysMulti1xAeAuthEapStartsWhileAuthenticated, etsysMulti1xAeAuthEapLogoffWhileAuthenticated, etsysMulti1xAeBackendResponses, etsysMulti1xAeBackendAccessChallenges, etsysMulti1xAeBackendOtherRequestsToSupplicant, etsysMulti1xAeBackendNonNakResponsesFromSupplicant, etsysMulti1xAeBackendAuthSuccesses, etsysMulti1xAeBackendAuthFails } STATUS current DESCRIPTION "A collection of objects providing diagnostic statistics for all the Access Entities running on all the ports." ::= { etsysMultiUser8021xGroups 3 } etsysMultiUser8021xAccessEntitySessionGroup OBJECT-GROUP OBJECTS { etsysMulti1xSessionOctetsRx, etsysMulti1xSessionOctetsTx, etsysMulti1xSessionFramesRx, etsysMulti1xSessionFramesTx, etsysMulti1xSessionId, etsysMulti1xSessionAuthenticMethod, etsysMulti1xSessionTime, etsysMulti1xSessionTerminateCause, etsysMulti1xSessionUserName, etsysMulti1xSessionActive } STATUS current DESCRIPTION "A collection of objects providing session statistics for all the Access Entities running on all the ports." ::= { etsysMultiUser8021xGroups 4 } etsysMultiUser8021xSupplicantAddressGroup OBJECT-GROUP OBJECTS { etsysMulti1xSupplicantActive, etsysMulti1xSupplicantUserName } STATUS current DESCRIPTION "A collection of objects providing a means to look up all of the Access Entities that are associated with a particular supplicant address." ::= { etsysMultiUser8021xGroups 5 } etsysMultiUser8021xUserNameGroup OBJECT-GROUP OBJECTS { etsysMulti1xUserName, etsysMulti1xUserActive, etsysMulti1xUserAddress } STATUS current DESCRIPTION "A collection of objects providing a means to look up all of the Access Entities that are associated with a particular user name." ::= { etsysMultiUser8021xGroups 6 } etsysMultiUser8021xActiveAccessEntityGroup OBJECT-GROUP OBJECTS { etsysMulti1xActiveSupplicantAddress } STATUS current DESCRIPTION "The Supplicant Address for each active Access Entity." ::= { etsysMultiUser8021xGroups 7 } -- ------------------------------------------------------------- -- Compliance statements -- ------------------------------------------------------------- etsysMulti8021xCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for devices that support the Enterasys Multi User IEEE 802.1x MIB." MODULE MANDATORY-GROUPS { etsysMultiUser8021xAccessEntityGroup, etsysMultiUser8021xAccessEntityStatsGroup, etsysMultiUser8021xAccessEntityDiagGroup, etsysMultiUser8021xAccessEntitySessionGroup, etsysMultiUser8021xSupplicantAddressGroup, etsysMultiUser8021xUserNameGroup, etsysMultiUser8021xActiveAccessEntityGroup } ::= { etsysMultiUser8021xCompliances 1 } END