ENTERASYS-IEEE8023-LAG-MIB-EXT-MIB DEFINITIONS ::= BEGIN -- enterasys-ieee8023-lag-mib-ext-mib.txt -- -- Part Number: -- -- -- This module provides authoritative definitions for Enterasys -- Networks' IEEE8023-LAG-MIB extension MIB. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys Networks grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in -- connection with the management of Enterasys Networks products. -- Copyright January, 2003 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF dot3adAggPortEntry FROM IEEE8023-LAG-MIB EnabledStatus FROM P-BRIDGE-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsysIeee8023LagMibExtMIB MODULE-IDENTITY LAST-UPDATED "200409031514Z" -- Fri Sep 3 15:14 GMT 2004 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the SNMP MIB under Enterasys Networks' enterprise OID pertaining to proprietary extensions to the IEEE8023-LAG-MIB as defined by the IEEE 802.3ad Working Group." REVISION "200409031514Z" -- Fri Sep 3 15:14 GMT 2004 DESCRIPTION "Added the etsysDot3adAggGlobalFormSinglePortLags object." REVISION "200301312316Z" -- Fri Jan 31 23:16 GMT 2003 DESCRIPTION "The initial version of this MIB module" ::= { etsysModules 35 } etsysIeee8023LagMibExt OBJECT IDENTIFIER ::= { etsysIeee8023LagMibExtMIB 1 } -- ---------------------------------------------------------- -- -- branches in the ENTERASYS-IETF-P-BRIDGE-MIB-EXT-MIB -- ---------------------------------------------------------- -- etsysDot3adAggGlobal OBJECT IDENTIFIER ::= { etsysIeee8023LagMibExt 1 } etsysDot3adAggPort OBJECT IDENTIFIER ::= { etsysIeee8023LagMibExt 2 } -- ------------------------------------------------------------- -- Extension to globally enable or disable the LAG functionality. -- ------------------------------------------------------------- etsysDot3adAggGlobalEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled/disabled status of the IEEE 802.3ad link aggregation functionality on the managed entity. A value of disabled(2) will prevent the formation of Link Aggregations, and the transmission and processing of LACP BPDUs, however, all relevant MIBs will still be present." REFERENCE "IEEE Standard 802.3-2002, Section 3, part 43." DEFVAL { enabled } ::= { etsysDot3adAggGlobal 1 } etsysDot3adAggGlobalFormSinglePortLags OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The ability of forming single port Link Aggregation Groups on this entity. If enabled(1) Link Aggregation Groups can form with 1 port, otherwise 2 or more ports are required." REFERENCE "IEEE Standard 802.3-2002, Section 3, part 43." DEFVAL { disabled } ::= { etsysDot3adAggGlobal 2 } -- ------------------------------------------------------------- -- Extensions to the Aggregation Port Table -- ------------------------------------------------------------- etsysDot3adAggPortTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot3adAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Extensions to the table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table for each physical port." ::= { etsysDot3adAggPort 1 } etsysDot3adAggPortEntry OBJECT-TYPE SYNTAX EtsysDot3adAggPortEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of proprietary Link Aggregation Control configuration parameters for each Aggregation Port on this device." AUGMENTS { dot3adAggPortEntry } ::= { etsysDot3adAggPortTable 1 } EtsysDot3adAggPortEntry ::= SEQUENCE { etsysDot3adAggPortEnable INTEGER } etsysDot3adAggPortEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The enabled/disabled status of the IEEE 802.3ad link aggregation functionality on this port. A value of disabled(2) will prevent the transmission and processing of LACP BPDUs on this port." REFERENCE "IEEE Standard 802.3-2002, Section 3, part 43." DEFVAL { enabled } ::= { etsysDot3adAggPortEntry 1 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- etsysIeee8023LagConformance OBJECT IDENTIFIER ::= { etsysIeee8023LagMibExtMIB 2 } etsysIeee8023LagGroups OBJECT IDENTIFIER ::= { etsysIeee8023LagConformance 1 } etsysIeee8023LagCompliances OBJECT IDENTIFIER ::= { etsysIeee8023LagConformance 2 } -- ------------------------------------------------------------- -- Units of conformance -- ------------------------------------------------------------- etsysDot3adAggGlobalGroup OBJECT-GROUP OBJECTS { etsysDot3adAggGlobalEnable } STATUS current DESCRIPTION "A collection of objects relating to the User Priority applicable to each port." ::= { etsysIeee8023LagGroups 1 } etsysDot3adAggPortGroup OBJECT-GROUP OBJECTS { etsysDot3adAggPortEnable } STATUS current DESCRIPTION "A collection of objects relating to proprietary per port configuration." ::= { etsysIeee8023LagGroups 2 } etsysDot3adAggGlobalSinglePortGroup OBJECT-GROUP OBJECTS { etsysDot3adAggGlobalFormSinglePortLags } STATUS current DESCRIPTION "A collection of objects relating to forming LAG groups with single ports." ::= { etsysIeee8023LagGroups 3 } -- ------------------------------------------------------------- -- Compliance statements -- ------------------------------------------------------------- etsysIeee8023LagCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support the IEEE8023-LAG-MIB Extension MIB." MODULE GROUP etsysDot3adAggGlobalGroup DESCRIPTION "Support for this group is optional and only applies to products that wish to support the enabling and disabling of IEEE 802.3ad Aggregation functionality on a global basis." GROUP etsysDot3adAggPortGroup DESCRIPTION "Support for this group is optional and only applies to products that wish to support the enabling and disabling of the transmission and processing of LACP BPDUs on a per port basis." GROUP etsysDot3adAggGlobalSinglePortGroup DESCRIPTION "Support for this group is optional and only applies to products that wish to support the formation of single port Link Aggregation Groups." ::= { etsysIeee8023LagCompliances 1 } END