ENTERASYS-8021X-EXTENSIONS-MIB DEFINITIONS ::= BEGIN -- enterasys-8021x-extensions-mib.txt -- -- Part Number: -- -- -- This module provides authoritative definitions for Enterasys -- Networks' IEEE 802.1X extensions MIB. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in this -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys Networks grants vendors, end-users, and other interested -- parties a non-exclusive license to use this Specification in -- connection with the management of Enterasys Networks products. -- Copyright February, 2002 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Unsigned32, TimeTicks FROM SNMPv2-SMI TruthValue, MacAddress, RowStatus FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF InterfaceIndex FROM IF-MIB SnmpAdminString FROM SNMP-FRAMEWORK-MIB PaeControlledDirections, PaeControlledPortStatus, PaeControlledPortControl FROM IEEE8021-PAE-MIB etsysModules FROM ENTERASYS-MIB-NAMES; etsys8021xExtensionsMIB MODULE-IDENTITY LAST-UPDATED "200311211623Z" -- Fri Nov 21 16:23 GMT 2003 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the SNMP enterprise MIBs under Enterasys Networks' enterprise OID pertaining to IEEE 802.1X authentication. This MIB is designed to supplement and be used in connection with the standard IEEE 802.1X-2001 MIB. It provides a convenient way to retrieve authentication status for station- based access control. (Here, a MAC address is a much more natural table index than a port or interface number.)" REVISION "200311211623Z" -- Fri Nov 21 16:23 GMT 2003 DESCRIPTION "Modifications to limit the number of stations that statistics are gathered for." REVISION "200203072010Z" -- Thu Mar 7 20:10 GMT 2002 DESCRIPTION "The initial version of this MIB module." ::= { etsysModules 18 } etsysDot1xExtensionsObjects OBJECT IDENTIFIER ::= { etsys8021xExtensionsMIB 1 } -- ---------------------------------------------------------- -- -- Textual Conventions -- ---------------------------------------------------------- -- -- ---------------------------------------------------------- -- -- Branches of the Enterasys 802.1X Extensions MIB -- ---------------------------------------------------------- -- etsysDot1xSystemBranch OBJECT IDENTIFIER ::= { etsysDot1xExtensionsObjects 1 } etsysDot1xAuthenticatorBranch OBJECT IDENTIFIER ::= { etsysDot1xExtensionsObjects 2 } etsysDot1xSupplicantBranch OBJECT IDENTIFIER ::= { etsysDot1xExtensionsObjects 3 } -- ---------------------------------------------------------- -- -- MIB Objects in the System Branch -- ---------------------------------------------------------- -- -- This branch is a placeholder. -- ---------------------------------------------------------- -- -- MIB Objects in the Authenticator PAE Branch -- ---------------------------------------------------------- -- -- IEEE 802.1X MIB information for virtual Authenticator PAEs that -- manage station-based supplicants. -- etsysDot1xAuthStationBranch OBJECT IDENTIFIER ::= { etsysDot1xAuthenticatorBranch 1 } -- ---------------------------------------------------------- -- -- The Station-Based Authenticator PAE Table -- ---------------------------------------------------------- -- etsysDot1xAuthStationTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot1xAuthStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains basic status information for the Authenticator PAEs associated with station-based virtual ports." ::= { etsysDot1xAuthStationBranch 1 } etsysDot1xAuthStationEntry OBJECT-TYPE SYNTAX EtsysDot1xAuthStationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each conceptual row contains basic information about a station-based Authenticator PAE. The most natural label for such a PAE is the MAC address of the Supplicant that it manages, and that, in some sense, called the PAE into existence. So we index the table by the Supplicant MAC address." INDEX { etsysDot1xAuthStationAddress } ::= { etsysDot1xAuthStationTable 1 } EtsysDot1xAuthStationEntry ::= SEQUENCE { etsysDot1xAuthStationAddress MacAddress, etsysDot1xAuthStationPaePort InterfaceIndex, etsysDot1xAuthStationPaeState INTEGER, etsysDot1xAuthStationBackendAuthState INTEGER, etsysDot1xAuthStationUserName SnmpAdminString } etsysDot1xAuthStationAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The 48-bit IEEE media access control address of the Supplicant associated with the logical station-based access control port." ::= { etsysDot1xAuthStationEntry 1 } etsysDot1xAuthStationPaePort OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The dot1xPaePortNumber of the shared-media port that is associated with this Authenticator PAE." ::= { etsysDot1xAuthStationEntry 2 } etsysDot1xAuthStationPaeState OBJECT-TYPE SYNTAX INTEGER { initialize(1), disconnected(2), connecting(3), authenticating(4), authenticated(5), aborting(6), held(7), forceAuth(8), forceUnauth(9) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the Authenticator PAE state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, Authenticator PAE state" ::= { etsysDot1xAuthStationEntry 3 } etsysDot1xAuthStationBackendAuthState OBJECT-TYPE SYNTAX INTEGER { request(1), response(2), success(3), fail(4), timeout(5), idle(6), initialize(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "The current state of the Backend Authentication state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, Backend Authentication state" ::= { etsysDot1xAuthStationEntry 4 } etsysDot1xAuthStationUserName OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The User-Name representing the identity of the Supplicant PAE." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session User Name" ::= { etsysDot1xAuthStationEntry 5 } -- ---------------------------------------------------------- -- -- The Station-Based Authenticator Configuration Table -- ---------------------------------------------------------- -- etsysDot1xAuthConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot1xAuthConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains configuration objects for the Authenticator PAE associated with each station-based virtual port. Station-based configuration management poses several rather major inconveniences, including a large number of rows, rows indexed by MAC address (rather than by user), and rows that come and go. Port-level and Authentication-Server-based management are quite a bit more convenient. Thus, most of the objects in this table are read-only; a way to see how other settings have interacted if you need this information for troubleshooting purposes." ::= { etsysDot1xAuthStationBranch 2 } etsysDot1xAuthConfigEntry OBJECT-TYPE SYNTAX EtsysDot1xAuthConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Configuration information for a station-based Authenticator PAE." INDEX { etsysDot1xAuthStationAddress } ::= { etsysDot1xAuthConfigTable 1 } EtsysDot1xAuthConfigEntry ::= SEQUENCE { etsysDot1xAuthInitialize TruthValue, etsysDot1xAuthReauthenticate TruthValue, etsysDot1xAuthAdminControlledDirections PaeControlledDirections, etsysDot1xAuthOperControlledDirections PaeControlledDirections, etsysDot1xAuthAuthControlledPortStatus PaeControlledPortStatus, etsysDot1xAuthAuthControlledPortControl PaeControlledPortControl, etsysDot1xAuthQuietPeriod Unsigned32, etsysDot1xAuthTxPeriod Unsigned32, etsysDot1xAuthSuppTimeout Unsigned32, etsysDot1xAuthServerTimeout Unsigned32, etsysDot1xAuthMaxReq Unsigned32, etsysDot1xAuthReAuthPeriod Unsigned32, etsysDot1xAuthReAuthEnabled TruthValue, etsysDot1xAuthKeyTxEnabled TruthValue } etsysDot1xAuthInitialize OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The initialization control for this Authenticator PAE. Setting this attribute to TRUE causes the PAE to be initialized. The attribute value reverts to FALSE once initialization has completed." REFERENCE "IEEE 802.1X-2001 Section 9.6.1.2, Initialize Port" ::= { etsysDot1xAuthConfigEntry 1 } etsysDot1xAuthReauthenticate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "The reauthentication control for this Authenticator PAE. Setting this attribute to TRUE causes the Authenticator PAE state machine to reauthenticate the Supplicant. Setting this attribute FALSE has no effect. This attribute always returns FALSE when it is read." REFERENCE "IEEE 802.1X-2001 Section 9.4.1.3 Reauthenticate" ::= { etsysDot1xAuthConfigEntry 2 } etsysDot1xAuthAdminControlledDirections OBJECT-TYPE SYNTAX PaeControlledDirections MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the administrative controlled directions parameter for the virtual port." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, Admin Control Mode" ::= { etsysDot1xAuthConfigEntry 3 } etsysDot1xAuthOperControlledDirections OBJECT-TYPE SYNTAX PaeControlledDirections MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the operational controlled directions parameter for the virtual port." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, Oper Control Mode" ::= { etsysDot1xAuthConfigEntry 4 } etsysDot1xAuthAuthControlledPortStatus OBJECT-TYPE SYNTAX PaeControlledPortStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the controlled Port status parameter for the virtual port." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, AuthControlledPortStatus" ::= { etsysDot1xAuthConfigEntry 5 } etsysDot1xAuthAuthControlledPortControl OBJECT-TYPE SYNTAX PaeControlledPortControl MAX-ACCESS read-only STATUS current DESCRIPTION "The current value of the controlled Port control parameter for the virtual port." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, AuthControlledPortControl" ::= { etsysDot1xAuthConfigEntry 6 } etsysDot1xAuthQuietPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the quietPeriod constant currently in use by the Authenticator PAE state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, quietPeriod" ::= { etsysDot1xAuthConfigEntry 7 } etsysDot1xAuthTxPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the txPeriod constant currently in use by the Authenticator PAE state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, txPeriod" ::= { etsysDot1xAuthConfigEntry 8 } etsysDot1xAuthSuppTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the suppTimeout constant currently in use by the Backend Authentication state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, suppTimeout" ::= { etsysDot1xAuthConfigEntry 9 } etsysDot1xAuthServerTimeout OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the serverTimeout constant currently in use by the Backend Authentication state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, serverTimeout" ::= { etsysDot1xAuthConfigEntry 10 } etsysDot1xAuthMaxReq OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the maxReq constant currently in use by the Backend Authentication state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, maxReq" ::= { etsysDot1xAuthConfigEntry 11 } etsysDot1xAuthReAuthPeriod OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value, in seconds, of the reAuthPeriod constant currently in use by the Reauthentication Timer state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, reAuthPeriod" ::= { etsysDot1xAuthConfigEntry 12 } etsysDot1xAuthReAuthEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The enable/disable control used by the Reauthentication Timer state machine (IEEE 802.1X-2001 Section 8.5.5.1)." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, reAuthEnabled" DEFVAL { false } ::= { etsysDot1xAuthConfigEntry 13 } etsysDot1xAuthKeyTxEnabled OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the keyTransmissionEnabled constant currently in use by the Authenticator PAE state machine." REFERENCE "IEEE 802.1X-2001 Section 9.4.1, keyTransmissionEnabled" ::= { etsysDot1xAuthConfigEntry 14 } -- ---------------------------------------------------------- -- -- The Authenticator Statistics Table -- ---------------------------------------------------------- -- etsysDot1xAuthStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot1xAuthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the statistics objects for the Authenticator PAE associated with each supplicant/station." REFERENCE "IEEE 802.1X-2001 Section 9.4.2 Authenticator Statistics" ::= { etsysDot1xAuthStationBranch 3 } etsysDot1xAuthStatsEntry OBJECT-TYPE SYNTAX EtsysDot1xAuthStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The statistics information for an Authenticator PAE." INDEX { etsysDot1xAuthStationAddress } ::= { etsysDot1xAuthStatsTable 1 } EtsysDot1xAuthStatsEntry ::= SEQUENCE { etsysDot1xAuthEapolFramesRx Counter32, etsysDot1xAuthEapolFramesTx Counter32, etsysDot1xAuthEapolStartFramesRx Counter32, etsysDot1xAuthEapolLogoffFramesRx Counter32, etsysDot1xAuthEapolRespIdFramesRx Counter32, etsysDot1xAuthEapolRespFramesRx Counter32, etsysDot1xAuthEapolReqIdFramesTx Counter32, etsysDot1xAuthEapolReqFramesTx Counter32, etsysDot1xAuthInvalidEapolFramesRx Counter32, etsysDot1xAuthEapLengthErrorFramesRx Counter32, etsysDot1xAuthLastEapolFrameVersion Unsigned32, etsysDot1xAuthLastEapolFrameSource MacAddress } etsysDot1xAuthEapolFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAPOL frames of any type that have been received by this Authenticator." REFERENCE "IEEE 802.1x Section 9.4.2, EAPOL frames received" ::= { etsysDot1xAuthStatsEntry 1 } etsysDot1xAuthEapolFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames of any type that have been transmitted by this Authenticator." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAPOL frames transmitted" ::= { etsysDot1xAuthStatsEntry 2 } etsysDot1xAuthEapolStartFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Start frames that have been received by this Authenticator." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAPOL Start frames received" ::= { etsysDot1xAuthStatsEntry 3 } etsysDot1xAuthEapolLogoffFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL Logoff frames that have been received by this Authenticator." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAPOL Logoff frames received" ::= { etsysDot1xAuthStatsEntry 4 } etsysDot1xAuthEapolRespIdFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Resp/Id frames that have been received by this Authenticator." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAPOL Resp/Id frames received" ::= { etsysDot1xAuthStatsEntry 5 } etsysDot1xAuthEapolRespFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this Authenticator." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAPOL Response frames received" ::= { etsysDot1xAuthStatsEntry 6 } etsysDot1xAuthEapolReqIdFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Req/Id frames that have been transmitted by this Authenticator." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAPOL Req/Id frames transmitted" ::= { etsysDot1xAuthStatsEntry 7 } etsysDot1xAuthEapolReqFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this Authenticator." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAPOL Request frames transmitted" ::= { etsysDot1xAuthStatsEntry 8 } etsysDot1xAuthInvalidEapolFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by this Authenticator in which the frame type is not recognized." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, Invalid EAPOL frames received" ::= { etsysDot1xAuthStatsEntry 9 } etsysDot1xAuthEapLengthErrorFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length field is invalid." REFERENCE "IEEE 802.1X-2001 Section 9.4.2, EAP length error frames received" ::= { etsysDot1xAuthStatsEntry 10 } etsysDot1xAuthLastEapolFrameVersion OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol version number carried in the most recently received EAPOL frame." REFERENCE "IEEE 802.1x Section 9.4.2, Last EAPOL frame version" ::= { etsysDot1xAuthStatsEntry 11 } etsysDot1xAuthLastEapolFrameSource OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The source MAC address carried in the most recently received EAPOL frame." REFERENCE "IEEE 802.1x Section 9.4.2, Last EAPOL frame source" ::= { etsysDot1xAuthStatsEntry 12 } -- ---------------------------------------------------------- -- -- The Authenticator Diagnostics Table -- ---------------------------------------------------------- -- etsysDot1xAuthDiagTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot1xAuthDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the diagnostics objects for the Authenticator PAE associated with each Port. An entry appears in this table for each port that may authenticate access to itself." REFERENCE "IEEE 802.1X-2001 Section 9.4.3 Authenticator Diagnostics" ::= { etsysDot1xAuthStationBranch 4 } etsysDot1xAuthDiagEntry OBJECT-TYPE SYNTAX EtsysDot1xAuthDiagEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The diagnostics information for an Authenticator PAE." INDEX { etsysDot1xAuthStationAddress } ::= { etsysDot1xAuthDiagTable 1 } EtsysDot1xAuthDiagEntry ::= SEQUENCE { etsysDot1xAuthEntersConnecting Counter32, etsysDot1xAuthEapLogoffsWhileConnecting Counter32, etsysDot1xAuthEntersAuthenticating Counter32, etsysDot1xAuthAuthSuccessWhileAuthenticating Counter32, etsysDot1xAuthAuthTimeoutsWhileAuthenticating Counter32, etsysDot1xAuthAuthFailWhileAuthenticating Counter32, etsysDot1xAuthAuthReauthsWhileAuthenticating Counter32, etsysDot1xAuthAuthEapStartsWhileAuthenticating Counter32, etsysDot1xAuthAuthEapLogoffWhileAuthenticating Counter32, etsysDot1xAuthAuthReauthsWhileAuthenticated Counter32, etsysDot1xAuthAuthEapStartsWhileAuthenticated Counter32, etsysDot1xAuthAuthEapLogoffWhileAuthenticated Counter32, etsysDot1xAuthBackendResponses Counter32, etsysDot1xAuthBackendAccessChallenges Counter32, etsysDot1xAuthBackendOtherRequestsToSupplicant Counter32, etsysDot1xAuthBackendNonNakResponsesFromSupplicant Counter32, etsysDot1xAuthBackendAuthSuccesses Counter32, etsysDot1xAuthBackendAuthFails Counter32 } etsysDot1xAuthEntersConnecting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions to the CONNECTING state from any other state." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.1" ::= { etsysDot1xAuthDiagEntry 1 } etsysDot1xAuthEapLogoffsWhileConnecting OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from CONNECTING to DISCONNECTED as a result of receiving an EAPOL-Logoff message." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.2" ::= { etsysDot1xAuthDiagEntry 2 } etsysDot1xAuthEntersAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from CONNECTING to AUTHENTICATING, as a result of an EAP-Response/Identity message being received from the Supplicant." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.3" ::= { etsysDot1xAuthDiagEntry 3 } etsysDot1xAuthAuthSuccessWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to AUTHENTICATED, as a result of the Backend Authentication state machine indicating successful authentication of the Supplicant (authSuccess = TRUE)." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.4" ::= { etsysDot1xAuthDiagEntry 4 } etsysDot1xAuthAuthTimeoutsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of the Backend Authentication state machine indicating authentication timeout (authTimeout = TRUE)." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.5" ::= { etsysDot1xAuthDiagEntry 5 } etsysDot1xAuthAuthFailWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to HELD, as a result of the Backend Authentication state machine indicating authentication failure (authFail = TRUE)." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.6" ::= { etsysDot1xAuthDiagEntry 6 } etsysDot1xAuthAuthReauthsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of a reauthentication request (reAuthenticate = TRUE)." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.7" ::= { etsysDot1xAuthDiagEntry 7 } etsysDot1xAuthAuthEapStartsWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Start message being received from the Supplicant." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.8" ::= { etsysDot1xAuthDiagEntry 8 } etsysDot1xAuthAuthEapLogoffWhileAuthenticating OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATING to ABORTING, as a result of an EAPOL-Logoff message being received from the Supplicant." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.9" ::= { etsysDot1xAuthDiagEntry 9 } etsysDot1xAuthAuthReauthsWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of a reauthentication request (reAuthenticate = TRUE)." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.10" ::= { etsysDot1xAuthDiagEntry 10 } etsysDot1xAuthAuthEapStartsWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to CONNECTING, as a result of an EAPOL-Start message being received from the Supplicant." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.11" ::= { etsysDot1xAuthDiagEntry 11 } etsysDot1xAuthAuthEapLogoffWhileAuthenticated OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine transitions from AUTHENTICATED to DISCONNECTED, as a result of an EAPOL-Logoff message being received from the Supplicant." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.4.2.12" ::= { etsysDot1xAuthDiagEntry 12 } etsysDot1xAuthBackendResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine sends an initial Access-Request packet to the Authentication server (i.e., executes sendRespToServer on entry to the RESPONSE state). Indicates that the Authenticator attempted communication with the Authentication Server." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.6.2.1" ::= { etsysDot1xAuthDiagEntry 13 } etsysDot1xAuthBackendAccessChallenges OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an initial Access-Challenge packet from the Authentication server (i.e., aReq becomes TRUE, causing exit from the RESPONSE state). Indicates that the Authentication Server has communication with the Authenticator." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.6.2.2" ::= { etsysDot1xAuthDiagEntry 14 } etsysDot1xAuthBackendOtherRequestsToSupplicant OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine sends an EAP-Request packet (other than an Identity, Notification, Failure or Success message) to the Supplicant (i.e., executes txReq on entry to the REQUEST state). Indicates that the Authenticator chose an EAP-method." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.6.2.3" ::= { etsysDot1xAuthDiagEntry 15 } etsysDot1xAuthBackendNonNakResponsesFromSupplicant OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives a response from the Supplicant to an initial EAP-Request, and the response is something other than EAP-NAK (i.e., rxResp becomes TRUE, causing the state machine to transition from REQUEST to RESPONSE, and the response is not an EAP-NAK). Indicates that the Supplicant can respond to the Authenticator's chosen EAP-method." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.6.2.4" ::= { etsysDot1xAuthDiagEntry 16 } etsysDot1xAuthBackendAuthSuccesses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an EAP-Success message from the Authentication Server (i.e., aSuccess becomes TRUE, causing a transition from RESPONSE to SUCCESS). Indicates that the Supplicant has successfully authenticated to the Authentication Server." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.6.2.5" ::= { etsysDot1xAuthDiagEntry 17 } etsysDot1xAuthBackendAuthFails OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times that the state machine receives an EAP-Failure message from the Authentication Server (i.e., aFail becomes TRUE, causing a transition from RESPONSE to FAIL). Indicates that the Supplicant has not authenticated to the Authentication Server." REFERENCE "IEEE 802.1X-2001 Sections 9.4.2, 8.5.6.2.6" ::= { etsysDot1xAuthDiagEntry 18 } -- ---------------------------------------------------------- -- -- The Authenticator Session Statistics Table -- ---------------------------------------------------------- -- etsysDot1xAuthSessionStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot1xAuthSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table that contains the session statistics objects for the Authenticator PAE associated with each supplicant. An entry appears in this table for each supplicant." REFERENCE "IEEE 802.1X-2001 Section 9.4.4" ::= { etsysDot1xAuthStationBranch 5 } etsysDot1xAuthSessionStatsEntry OBJECT-TYPE SYNTAX EtsysDot1xAuthSessionStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The session statistics information for an Authenticator PAE. This shows the current values being collected for each session that is still in progress." INDEX { etsysDot1xAuthStationAddress } ::= { etsysDot1xAuthSessionStatsTable 1 } EtsysDot1xAuthSessionStatsEntry ::= SEQUENCE { etsysDot1xAuthSessionOctetsRx Counter64, etsysDot1xAuthSessionOctetsTx Counter64, etsysDot1xAuthSessionFramesRx Counter32, etsysDot1xAuthSessionFramesTx Counter32, etsysDot1xAuthSessionId SnmpAdminString, etsysDot1xAuthSessionAuthenticMethod INTEGER, etsysDot1xAuthSessionTime TimeTicks, etsysDot1xAuthSessionTerminateCause INTEGER -- Session name is in etsysDot1xAuthStationTable } etsysDot1xAuthSessionOctetsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets received in user data frames from the supplicant PAE during the session." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Octets Received" ::= { etsysDot1xAuthSessionStatsEntry 1 } etsysDot1xAuthSessionOctetsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of octets transmitted in user data frames to the supplicant PAE during the session." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Octets Transmitted" ::= { etsysDot1xAuthSessionStatsEntry 2 } etsysDot1xAuthSessionFramesRx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user data frames received from the supplicant PAE during the session." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Frames Received" ::= { etsysDot1xAuthSessionStatsEntry 3 } etsysDot1xAuthSessionFramesTx OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of user data frames transmitted to the supplicant PAE during the session." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Frames Transmitted" ::= { etsysDot1xAuthSessionStatsEntry 4 } etsysDot1xAuthSessionId OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "A unique identifier for the session, in the form of a printable ASCII string of at least three characters." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Identifier" ::= { etsysDot1xAuthSessionStatsEntry 5 } etsysDot1xAuthSessionAuthenticMethod OBJECT-TYPE SYNTAX INTEGER { remoteAuthServer(1), localAuthServer(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The authentication method used to establish the session." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Authentication Method" ::= { etsysDot1xAuthSessionStatsEntry 6 } etsysDot1xAuthSessionTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The duration of the session in seconds." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Time" ::= { etsysDot1xAuthSessionStatsEntry 7 } etsysDot1xAuthSessionTerminateCause OBJECT-TYPE SYNTAX INTEGER { supplicantLogoff(1), portFailure(2), supplicantRestart(3), reauthFailed(4), authControlForceUnauth(5), portReInit(6), portAdminDisabled(7), notTerminatedYet(999) } MAX-ACCESS read-only STATUS current DESCRIPTION "The reason for the session termination." REFERENCE "IEEE 802.1X-2001 Section 9.4.4, Session Terminate Cause" ::= { etsysDot1xAuthSessionStatsEntry 8 } -- ---------------------------------------------------------- -- -- Authenticator Statistics Table Supported Objects -- ---------------------------------------------------------- -- etsysDot1xAuthStatsSupported OBJECT-TYPE SYNTAX BITS { etsysDot1xAuthEapolFramesRxSupported(0), etsysDot1xAuthEapolFramesTxSupported(1), etsysDot1xAuthEapolStartFramesRxSupported(2), etsysDot1xAuthEapolLogoffFramesRxSupported(3), etsysDot1xAuthEapolRespIdFramesRxSupported(4), etsysDot1xAuthEapolRespFramesRxSupported(5), etsysDot1xAuthEapolReqIdFramesTxSupported(6), etsysDot1xAuthEapolReqFramesTxSupported(7), etsysDot1xAuthInvalidEapolFramesRxSupported(8), etsysDot1xAuthEapLengthErrorFramesRxSupported(9), etsysDot1xAuthLastEapolFrameVersionSupported(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the objects supported in the Authenticator Statistics Table." ::= { etsysDot1xAuthStationBranch 6 } -- ---------------------------------------------------------- -- -- Authenticator Diagnostic Table Supported Objects -- ---------------------------------------------------------- -- etsysDot1xAuthDiagSupported OBJECT-TYPE SYNTAX BITS { etsysDot1xAuthEntersConnectingSupported(0), etsysDot1xAuthEapLogoffsWhileConnectingSupported(1), etsysDot1xAuthEntersAuthenticatingSupported(2), etsysDot1xAuthAuthSuccessWhileAuthenticatingSupported(3), etsysDot1xAuthAuthTimeoutsWhileAuthenticatingSupported(4), etsysDot1xAuthAuthFailWhileAuthenticatingSupported(5), etsysDot1xAuthAuthReauthsWhileAuthenticatingSupported(6), etsysDot1xAuthAuthEapStartsWhileAuthenticatingSupported(7), etsysDot1xAuthAuthEapLogoffWhileAuthenticatingSupported(8), etsysDot1xAuthAuthReauthsWhileAuthenticatedSupported(9), etsysDot1xAuthAuthEapStartsWhileAuthenticatedSupported(10), etsysDot1xAuthAuthEapLogoffWhileAuthenticatedSupported(11), etsysDot1xAuthBackendResponsesSupported(12), etsysDot1xAuthBackendAccessChallengesSupported(13), etsysDot1xAuthBackendOtherRequestsToSupplicantSupported(14), etsysDot1xAuthBackendNonNakResponsesFromSupplicantSupported(15), etsysDot1xAuthBackendAuthSuccessesSupported(16), etsysDot1xAuthBackendAuthFailsSupported(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the objects supported in the Authenticator Diagnostics Table." ::= { etsysDot1xAuthStationBranch 7 } -- ---------------------------------------------------------- -- -- Authenticator Session Statistics Table Supported Objects -- ---------------------------------------------------------- -- etsysDot1xAuthSessionSuppportedObjs OBJECT-TYPE SYNTAX BITS { etsysDot1xAuthSessionOctetsRxSupported(0), etsysDot1xAuthSessionOctetsTxSupported(1), etsysDot1xAuthSessionFramesRxSupported(2), etsysDot1xAuthSessionFramesTxSupported(3), etsysDot1xAuthSessionIdSupported(4), etsysDot1xAuthSessionAuthenticMethodSupported(5), etsysDot1xAuthSessionTimeSupported(6), etsysDot1xAuthSessionTerminateCauseSupported(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the objects supported in the Authenticator Session Statistics Table." ::= { etsysDot1xAuthStationBranch 8 } -- ---------------------------------------------------------- -- -- Maximum Stations Capable of Being Authenticated -- ---------------------------------------------------------- -- etsysDot1xMaxCapableAuthStations OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of stations this device can authenticate." ::= { etsysDot1xAuthStationBranch 9 } -- ---------------------------------------------------------- -- -- Maximum Stations Statistics and Diagnostics Gathered -- ---------------------------------------------------------- -- etsysDot1xMaximumStationsStatsGathered OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of stations that this device can gather statistics, diagnostics, and session statistics for." ::= { etsysDot1xAuthStationBranch 10 } etsysDot1xCurrentStationsStatsGathered OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of stations that this device is currently gathering statistics, diagnostics, and session statistics for." ::= { etsysDot1xAuthStationBranch 11 } -- ---------------------------------------------------------- -- -- Station Watch List -- ---------------------------------------------------------- -- etsysDot1xAuthStationWatchTable OBJECT-TYPE SYNTAX SEQUENCE OF EtsysDot1xAuthStationWatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing the MAC addresses of stations that statistics, diagnostics, and session statistics will be kept for. This table's existence is due to the realization that devices may not have the resources to keep all of this data for all the authenticated stations; however, there is a need when debugging a network for these statistics. This compromise solution allows the network administrator to pick which stations to collect data for. If the maximum number of stations this device can collect data for is equal to the maximum number of stations the device can authenticate than this table has no effect or meaning. If the maximum number of stations this device can collect data for is 0 then this table has no effect or meaning. Please note: even though a station may be placed into the watch table, the statistics and diagnostic information that is acquired is ultimately determined by the device's capability to acquire that data. The statistics, diagnostics, and session statistics tables all have a read only object that allow the network administrator to determine what information the device can acquire." ::= { etsysDot1xAuthStationBranch 12 } etsysDot1xAuthStationWatchEntry OBJECT-TYPE SYNTAX EtsysDot1xAuthStationWatchEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row contains the MAC address of a station that statistics, diagnostics, and session statistics will be kept for." INDEX { etsysDot1xAuthInfoStationAddress } ::= { etsysDot1xAuthStationWatchTable 1 } EtsysDot1xAuthStationWatchEntry ::= SEQUENCE { etsysDot1xAuthInfoStationAddress MacAddress, etsysDot1xAuthInfoStationRowStatus RowStatus } etsysDot1xAuthInfoStationAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The MAC address of a station that statistics, diagnostics, and session statistics will be kept for." ::= { etsysDot1xAuthStationWatchEntry 1 } etsysDot1xAuthInfoStationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "A control that allows entries to be added, activated, deactivated, and removed from this table. When the value of this object is 'active' none of the other objects in this conceptual row can be modified. Setting this object to the 'active' state from the 'notInService' state will cause the collection of the above described statistics. Setting this object to any other valid state from the 'active' state will cause the collection of the above described statistics to stop. Setting this object to the 'active' state from the 'active' state will not have any affect. Conceptual rows that have been in the 'notInService' state for more than a device specific time period MAY be destroyed by the managed entity." ::= { etsysDot1xAuthStationWatchEntry 2 } -- ---------------------------------------------------------- -- -- MIB Objects in the Supplicant Branch -- ---------------------------------------------------------- -- -- This branch is a placeholder for any Supplicant-PAE-related -- objects that might be added to this MIB in the future. -- -- It is currently empty. -- ---------------------------------------------------------- -- -- Enterasys Networks 802.1X Ext. MIB-Conformance Information -- ---------------------------------------------------------- -- etsysDot1xConformance OBJECT IDENTIFIER ::= { etsys8021xExtensionsMIB 2 } etsysDot1xGroups OBJECT IDENTIFIER ::= { etsysDot1xConformance 1 } etsysDot1xCompliances OBJECT IDENTIFIER ::= { etsysDot1xConformance 2 } -- ---------------------------------------------------------- -- -- Units of conformance -- ---------------------------------------------------------- -- etsysDot1xAuthStationGroup OBJECT-GROUP OBJECTS { etsysDot1xAuthStationPaePort, etsysDot1xAuthStationPaeState, etsysDot1xAuthStationBackendAuthState, etsysDot1xAuthStationUserName } STATUS current DESCRIPTION "A collection of objects providing basic status information about Authenticator PAEs running on ports that use station-based access control." ::= { etsysDot1xGroups 1 } etsysDot1xAuthConfigGroup OBJECT-GROUP OBJECTS { etsysDot1xAuthInitialize, etsysDot1xAuthReauthenticate, etsysDot1xAuthAdminControlledDirections, etsysDot1xAuthOperControlledDirections, etsysDot1xAuthAuthControlledPortStatus, etsysDot1xAuthAuthControlledPortControl, etsysDot1xAuthQuietPeriod, etsysDot1xAuthTxPeriod, etsysDot1xAuthSuppTimeout, etsysDot1xAuthServerTimeout, etsysDot1xAuthMaxReq, etsysDot1xAuthReAuthPeriod, etsysDot1xAuthReAuthEnabled, etsysDot1xAuthKeyTxEnabled } STATUS current DESCRIPTION "A collection of objects providing configuration information about Authenticator PAEs running on ports that use station- based access control." ::= { etsysDot1xGroups 2 } etsysDot1xAuthStatsGroup OBJECT-GROUP OBJECTS { etsysDot1xAuthEapolFramesRx, etsysDot1xAuthEapolFramesTx, etsysDot1xAuthEapolStartFramesRx, etsysDot1xAuthEapolLogoffFramesRx, etsysDot1xAuthEapolRespIdFramesRx, etsysDot1xAuthEapolRespFramesRx, etsysDot1xAuthEapolReqIdFramesTx, etsysDot1xAuthEapolReqFramesTx, etsysDot1xAuthInvalidEapolFramesRx, etsysDot1xAuthEapLengthErrorFramesRx, etsysDot1xAuthLastEapolFrameVersion, etsysDot1xAuthLastEapolFrameSource } STATUS current DESCRIPTION "A collection of objects providing statistics about Authenticator PAEs running on ports that use station- based access control." ::= { etsysDot1xGroups 3 } etsysDot1xAuthDiagGroup OBJECT-GROUP OBJECTS { etsysDot1xAuthEntersConnecting, etsysDot1xAuthEapLogoffsWhileConnecting, etsysDot1xAuthEntersAuthenticating, etsysDot1xAuthAuthSuccessWhileAuthenticating, etsysDot1xAuthAuthTimeoutsWhileAuthenticating, etsysDot1xAuthAuthFailWhileAuthenticating, etsysDot1xAuthAuthReauthsWhileAuthenticating, etsysDot1xAuthAuthEapStartsWhileAuthenticating, etsysDot1xAuthAuthEapLogoffWhileAuthenticating, etsysDot1xAuthAuthReauthsWhileAuthenticated, etsysDot1xAuthAuthEapStartsWhileAuthenticated, etsysDot1xAuthAuthEapLogoffWhileAuthenticated, etsysDot1xAuthBackendResponses, etsysDot1xAuthBackendAccessChallenges, etsysDot1xAuthBackendOtherRequestsToSupplicant, etsysDot1xAuthBackendNonNakResponsesFromSupplicant, etsysDot1xAuthBackendAuthSuccesses, etsysDot1xAuthBackendAuthFails } STATUS current DESCRIPTION "A collection of objects providing diagnostic statistics about Authenticator PAEs running on ports that use station- based access control." ::= { etsysDot1xGroups 4 } etsysDot1xAuthSessionStatsGroup OBJECT-GROUP OBJECTS { etsysDot1xAuthSessionOctetsRx, etsysDot1xAuthSessionOctetsTx, etsysDot1xAuthSessionFramesRx, etsysDot1xAuthSessionFramesTx, etsysDot1xAuthSessionId, etsysDot1xAuthSessionAuthenticMethod, etsysDot1xAuthSessionTime, etsysDot1xAuthSessionTerminateCause } STATUS current DESCRIPTION "A collection of objects providing statistics about the current or last sessions for Authenticator PAEs running on ports that use station-based access control." ::= { etsysDot1xGroups 5 } etsysDot1xAuthSessionControlGroup OBJECT-GROUP OBJECTS { etsysDot1xAuthSessionSuppportedObjs, etsysDot1xMaxCapableAuthStations, etsysDot1xCurrentStationsStatsGathered, etsysDot1xMaximumStationsStatsGathered, etsysDot1xAuthInfoStationAddress, etsysDot1xAuthInfoStationRowStatus } STATUS current DESCRIPTION "A collection of objects providing statistics about the current or last sessions for Authenticator PAEs running on ports that use station-based access control." ::= { etsysDot1xGroups 6 } -- ---------------------------------------------------------- -- -- Compliance statements -- ---------------------------------------------------------- -- etsysDot1xCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support the Enterasys IEEE 802.1x extensions MIB." MODULE -- MANDATORY-GROUPS {} GROUP etsysDot1xAuthStationGroup DESCRIPTION "This group is conditionally mandatory for systems that support both station-based 802.1x access control and the Authenticator functions of the PAE, and that implement any of the objects in the etsysDot1xAuthStationBranch." GROUP etsysDot1xAuthConfigGroup DESCRIPTION "This group is conditionally mandatory for systems that support both station-based 802.1x access control and the Authenticator functions of the PAE, and that implement any of the objects in the etsysDot1xAuthStationBranch." GROUP etsysDot1xAuthStatsGroup DESCRIPTION "This group is conditionally mandatory for systems that support both station-based 802.1x access control and the Authenticator functions of the PAE, and that implement any of the objects in the etsysDot1xAuthStationBranch." GROUP etsysDot1xAuthDiagGroup DESCRIPTION "This group is optional." GROUP etsysDot1xAuthSessionStatsGroup DESCRIPTION "This group is optional." GROUP etsysDot1xAuthSessionControlGroup DESCRIPTION "This group is optional." OBJECT etsysDot1xAuthInitialize MIN-ACCESS read-only DESCRIPTION "Write access is not required." OBJECT etsysDot1xAuthReauthenticate MIN-ACCESS read-only DESCRIPTION "Write access is not required." ::= { etsysDot1xCompliances 1 } END