CTRON-VLAN-CLASSIFY-MIB DEFINITIONS ::= BEGIN -- ------------------------------------------------------------- -- ctron-vlan-classify-mib.txt -- -- This module provides authoritative definitions for Enterasys's -- enterprise-specific VLAN classification MIB. -- -- This module will be extended, as required. -- -- ------------------------------------------------------------- -- Enterasys Networks reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Enterasys products. -- -- Copyright December 1999-2002 Enterasys Networks, Inc. -- ------------------------------------------------------------- IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Unsigned32 FROM SNMPv2-SMI DisplayString, RowStatus, TEXTUAL-CONVENTION FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF PortList FROM Q-BRIDGE-MIB ctVlanExt FROM CTRON-MIB-NAMES; ctVlanClassify MODULE-IDENTITY LAST-UPDATED "200301292215Z" -- Wed Jan 29 22:15 GMT 2003 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO " Enterasys Networks, Inc. Postal: 35 Industrial Way, P.O. Box 5005 Rochester, NH 03867-0505 Phone: (603) 332-9400 Email: support@enterasys.com Web: http://www.enterasys.com" DESCRIPTION "The Enterasys VLAN Classify MIB module for controlling Enterasys specific VLAN classification criteria based on packet content." REVISION "200212191631Z" -- Thu Dec 19 16:31 GMT 2002 DESCRIPTION "This revision primarily contains modifications to, and expansion of, the CtVlanClassifyType Textual Convention. These modification address historical and future usage." REVISION "200203272055Z" -- Wed Mar 27 20:55 GMT 2002 DESCRIPTION "This revision, 01.02.00, is a merge of revision 00.00.01, dated March 18, 1999, and revision 01.01.00, dated September 26, 2001." ::= { ctVlanExt 6 } ctVlanClassifyObjects OBJECT IDENTIFIER ::= { ctVlanClassify 1 } -- ------------------------------------------------------------- -- Textual Conventions -- ------------------------------------------------------------- CtVlanClassifyType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Each enumerated value represents a unique classification type. Different types have different rules regarding how data is interpreted during classification. These rules are spelled out in the comments preceding each type. Unless otherwise specified providing a value for DataMask is optional and the description for DataMask is as follows: DataMask is the same logical size the as the associated DataVal. DataMask is the one's complement of the DataVal bits to attempt to match on. (e.g., to match on the IP subnet 255.255.240.0 the value for DataMask would be 0x00000fff) Working from the most significant to the least significant bit '1 to 0' transitions are not allowed. (e.g., 0x000ffffe is not valid.) For DataVal objects that are less than 32 bits the leading inconsequential bits in the corresponding DataMask value must be zero. (e.g., 0x0000000f would attempt to match on the high order four bits in an eight bit DataVal.)" SYNTAX INTEGER { -- ----------------------------------------------------- -- DESCRIPTION: The EtherType field which is present -- in Ethernet II type packets. -- LIMITATIONS: -- DataVal: INTEGER(1536..65535) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- etherType(1), -- ----------------------------------------------------- -- DESCRIPTION: The DSAP/SSAP pair present in 802.3 -- framed packets -- LIMITATIONS: -- DataVal: INTEGER(0..65535) further limitations -- may exist on an implementation by -- implementation basis (DSAP must equal -- SSAP for example) -- DataMask: (optional) INTEGER holding the one byte -- control field in it's most significant -- byte and an EtherType value in it's next -- two significant bytes. The least -- significant byte holds a value indicating -- the number of relevant bits in the -- DataVal and remaining DataMask (from -- left to right) beginning at the two -- least significant bytes in the DataVal. -- A value of zero indicates all bits are -- relevant (to maintain backwards -- compatibility). -- ----------------------------------------------------- llcDsapSsap(2), -- ----------------------------------------------------- -- DESCRIPTION: The Type of Service field present in IP -- packets (3 bits of precedence, plus -- bits for delay, throughput, and reli- -- ability) -- LIMITATIONS: -- DataVal: INTEGER(0..255) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipTypeOfService(3), -- ----------------------------------------------------- -- DESCRIPTION: The IP Protocol field (ref. RFC 1700) -- examples include (TCP,UDP,ICMP,etc) -- LIMITATIONS: -- DataVal: INTEGER(0..255) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipProtocolType(4), -- ----------------------------------------------------- -- DESCRIPTION: Transmission control used by IPX -- routers, set to zero before network -- transmission. -- LIMITATIONS: -- DataVal: INTEGER(0..255) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipxClassOfService(5), -- ----------------------------------------------------- -- DESCRIPTION: IPX packet type, administered by Novell -- 0 ...... Hello or SAP -- 1 ...... RIP -- 2 ...... Echo Packet -- 3 ...... Error Packet -- 4 ...... Netware 386 or SAP -- 5 ...... Sequenced Packet Protocol -- 17 ..... Netware 286 -- 16-31 .. Experimental protocols -- LIMITATIONS: -- DataVal: INTEGER(0..31) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipxPacketType(6), -- ----------------------------------------------------- -- DESCRIPTION: This group represents IP addresses -- which are present in packets using -- the IP protocol. -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same IP unique, only one entry -- from this group may exist for a given -- IP address if bilateral rules are supported, -- additional entries fail. -- However, if the bilateral type is not supported -- a Source and a Destination rule with the -- same IP address can exist. -- -- DataVal: Each octet of an IP address uses one -- octet of this Unsigned32 value starting -- with the most significant octet (e.g., -- an IP address of 170.187.204.221 is -- represented by a value of 0xaabbccdd. -- DataMask: Required, but otherwise as described in the -- DESCRIPTION clause. -- ----------------------------------------------------- ipAddressSource(7), -- Source IP address only. ipAddressDestination(8), -- Destination IP address only. ipAddressBilateral(9), -- Both Source and Dest IP. -- ----------------------------------------------------- -- DESCRIPTION: The network number assigned to this -- IPX network (zero is the local network) -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same IP unique, only one entry -- from this group may exist for a given -- IP address if bilateral rules are supported, -- additional entries fail. -- However, if the bilateral type is not supported -- a Source and a Destination rule with the -- same IP address can exist. -- -- DataVal: INTEGER -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipxNetworkSource(10), ipxNetworkDestination(11), ipxNetworkBilateral(12), -- ----------------------------------------------------- -- DESCRIPTION: Describes a UDP/IP port(socket). These -- values are used by higher protocols -- to target specific applications among -- hosts. (ref. RFC 762) -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same IP unique, only one entry -- from this group may exist for a given -- IP address if bilateral rules are supported, -- additional entries fail. -- However, if the bilateral type is not supported -- a Source and a Destination rule with the -- same IP address can exist. -- -- DataVal: INTEGER(0..65535) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipUdpPortSource(13), ipUdpPortDestination(14), ipUdpPortBilateral(15), -- ----------------------------------------------------- -- DESCRIPTION: Describes a TCP/IP port(socket). These -- values are used by higher protocols -- to target specific applications among -- hosts. (ref. RFC 762) -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same IP unique, only one entry -- from this group may exist for a given -- IP address if bilateral rules are supported, -- additional entries fail. -- However, if the bilateral type is not supported -- a Source and a Destination rule with the -- same IP address can exist. -- -- DataVal: INTEGER(0..65535) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipTcpPortSource(16), ipTcpPortDestination(17), ipTcpPortBilateral(18), -- ----------------------------------------------------- -- DESCRIPTION: Describes a IPX socket. These -- values are used by higher protocols -- to target specific applications among -- hosts -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same IP unique, only one entry -- from this group may exist for a given -- IP address if bilateral rules are supported, -- additional entries fail. -- However, if the bilateral type is not supported -- a Source and a Destination rule with the -- same IP address can exist. -- -- DataVal: INTEGER(0..65535) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- ipxSocketSource(19), ipxSocketDestination(20), ipxSocketBilateral(21), -- ----------------------------------------------------- -- DESCRIPTION: Describes a MAC address. These -- values uniquely describe nodes on a -- OSI Layer 2 network. -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same IP unique, only one entry -- from this group may exist for a given -- IP address if bilateral rules are supported, -- additional entries fail. -- However, if the bilateral type is not supported -- a Source and a Destination rule with the -- same IP address can exist. -- -- DataVal: INTEGER holding the first 4 bytes of -- the 6 byte MAC address. -- DataMask: INTEGER holding the last 2 bytes of -- the 6 byte MAC address in the 2 most -- significant bytes of the INTEGER. -- The two least significant bytes will -- hold a value from 0 to 48 indicating -- the number of relevant bits in the MAC -- Address (from left to right). A value -- of zero indicates all bits are relevant -- (to maintain backwards compatibility). -- Example: MAC address is 00-12-34-56-78-9A, -- DataVal is 00123456 -- DataMask is 789A0000 -- ----------------------------------------------------- macAddressSource(22), macAddressDestination(23), macAddressBilateral(24), -- ----------------------------------------------------- -- DESCRIPTION: Describes IP Fragments. IP frames -- which exceed the MTU of the media on -- which they travel may be fragmented -- into smaller packets. These packets -- no longer contain the UDP/TCP port -- numbers, although they do still -- contain the IP addresses from the -- original frame. -- -- LIMITATIONS: -- DataVal: Val not used (0) -- DataMask: Mask not used (0) -- ----------------------------------------------------- ipFragments(25), -- ----------------------------------------------------- -- DESCRIPTION: Describes a UDP/IP port(socket) range. These -- values are used by higher protocols -- to target specific applications among -- hosts. (ref. RFC 762) These types should -- not be used on devices going forward. The -- mask portion of the UDP/IP port values should -- be implemented instead. -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same port unique, only one -- entry from this group may exist for a -- given port. Additional entries fail. -- -- DataVal: INTEGER(0..65535) -- DataMask: Not used. -- ----------------------------------------------------- ipUdpPortSourceRange(26), ipUdpPortDestinationRange(27), ipUdpPortBilateralRange(28), -- ----------------------------------------------------- -- DESCRIPTION: Describes a TCP/IP port(socket) range. These -- values are used by higher protocols -- to target specific applications among -- hosts. (ref. RFC 762) These types should -- not be used on devices going forward. The -- mask portion of the TCP/IP port values should -- be implemented instead. -- -- LIMITATIONS: While the distinction of Source/ -- Destination/Bilateral makes entries -- with the same port unique, only one -- entry from this group may exist for a -- given port. Additional entries fail. -- -- DataVal: INTEGER(0..65535) -- DataMask: Not used. -- ----------------------------------------------------- ipTcpPortSourceRange(29), ipTcpPortDestinationRange(30), ipTcpPortBilateralRange(31), -- ----------------------------------------------------- -- DESCRIPTION: Describes the ICMP Type and ICMP Code -- values found in an ICMP/IP header. -- These DataVal must be formatted such -- that the desired Type is represented -- in the second most least significant -- byte while the desired Code is repre- -- sented in the least significant byte. -- Support for DataMask is primarily -- intended to allow the Type to be speci- -- fied and the Code be wild-carded. -- -- LIMITATIONS: -- DataVal: INTEGER(0..65535) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- icmpType(32), -- ----------------------------------------------------- -- DESCRIPTION: Describes the VLAN_ID field found in a -- frame with an 802.1D TCI present. -- Such a frame has an EtherII type field -- of 0x8100. -- -- LIMITATIONS: -- DataVal: INTEGER(0..4095) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- vlanId(33), -- ----------------------------------------------------- -- DESCRIPTION: Describes the entire TCI field found -- in an 802.1D tagged frame. Such a frame -- an EtherII type field of 0x8100. -- Support for DataMask is primarily -- intended to allow for specification of -- the 802.1D priority bits located in the -- three most significant bits of the TCI. -- -- LIMITATIONS: -- DataVal: INTEGER(0..65535) -- DataMask: As described in the DESCRIPTION clause. -- ----------------------------------------------------- tci(34) } -- ------------------------------------------------------------- -- The VlanIndex TEXTUAL-CONVENTION although similar to the -- Q-BRIDGE-MIB as defined in draft-ietf-bridge-bridgemib-05.txt -- has been extended to cover Vids 0 and 4095 which are used -- for the following purposes: -- 0 Indicates that the forwarding action -- is to drop any packets matching the rule. -- -- 4095 Indicates that the forwarding action -- is to forward any packets matching the rule -- without specifying a VLAN in the rule. -- -- ------------------------------------------------------------- VlanIndex ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A value used to index per-VLAN tables: values of 0 and 4095 have special meaning; if the value is between 1 and 4094 inclusive, it represents an 802.1Q VLAN-ID with global scope within a given bridged domain (see VlanId textual convention). If the value is greater than 4095 then it represents a VLAN with scope local to the particular agent. If the value is 0 it indicates that the packets will be dropped. If the value is 4095, it indicates that the packets will be forwarded, but no VLAN is specified here." SYNTAX Unsigned32 -- ------------------------------------------------------------- -- VLAN Classification Group -- ------------------------------------------------------------- ctVlanClassifyStatus OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Allows the VLAN Classification feature to be globally enabled/disabled. A value of disable(2), functionally supersedes the RowStatus of individual entries in the ctVlanClassifyTable, but does not change their actual RowStatus value." DEFVAL { disable } ::= { ctVlanClassifyObjects 1} ctVlanClassifyMaxEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of entries allowed in the ctVlanClassifyTable." ::= { ctVlanClassifyObjects 2} ctVlanClassifyNumEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The current number of entries in the ctVlanClassifyTable." ::= { ctVlanClassifyObjects 3} -- ------------------------------------------------------------- -- VLAN Classification Table -- ------------------------------------------------------------- ctVlanClassifyTable OBJECT-TYPE SYNTAX SEQUENCE OF CtVlanClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing configuration information for each VLAN classification configured into the device by (local or network) management. All entries are permanent and will be restored after the device is reset." ::= { ctVlanClassifyObjects 4 } ctVlanClassifyEntry OBJECT-TYPE SYNTAX CtVlanClassifyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a particular entry of ctVlanClassifyTable." INDEX { ctVlanClassifyVlanIndex, ctVlanClassifyDataMeaning, ctVlanClassifyDataVal, ctVlanClassifyDataMask } ::= { ctVlanClassifyTable 1 } CtVlanClassifyEntry ::= SEQUENCE { ctVlanClassifyVlanIndex VlanIndex, ctVlanClassifyDataMeaning CtVlanClassifyType, ctVlanClassifyDataVal Unsigned32, ctVlanClassifyDataMask Unsigned32, ctVlanClassifyIngressList PortList, ctVlanClassifyRowStatus RowStatus, ctVlanClassifyRowInfo DisplayString } ctVlanClassifyVlanIndex OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN index for this entry. Any packet meeting the classification criteria specified by this conceptual row will be put into the VLAN indicated by this object." ::= { ctVlanClassifyEntry 1 } ctVlanClassifyDataMeaning OBJECT-TYPE SYNTAX CtVlanClassifyType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The meaning of the ctVlanClassifyDataVal leaf for this conceptual row. The ctVlanClassifyDataVal specifies a particular value which, when compared to packet data, is used to classify that packet into a particular VLAN. The part of the packet (if any), to which this data comparison applies, is determined by this object. For example, the value ipAddressBilateral(8) means that the value ctVlanClassifyDataVal for this entry is an IP address. It further means that the given IP address will be compared against both source and destination IP address fields in a packet. Such an entry obviously would not not match against any non-IP packets. Additionally, the value of this leaf will impose certain implicit ranges and interpretations of data contained within the ctVlanClassifyDataVal leaf for this entry. The specific limitations of each type should be spelled out in the comments for that type." ::= { ctVlanClassifyEntry 2 } ctVlanClassifyDataVal OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The data value associated with ctVlanClassifyDataMeaning. The explicit range of this value is any unsigned 32-bit integer(0..4294967295). This range may vary, however, depending upon the value of ctVlanClassifyDataMeaning. Illegal values should not be allowed." ::= { ctVlanClassifyEntry 3 } ctVlanClassifyDataMask OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object is the one's complement of a 32-bit mask. This mask is applicable to the data comparison of ctVlanClassifyDataVal. The mask is applied to the actual packet data under consideration through a logical bitwise AND operation. This result is then compared to the data. For example, we want to classify according to a bilateral IP address of 134.141.0.0 with a mask of 255.255.240.0. This would be reflected by the following values: ctVlanClassifyDataMeaning: ipAddressBilateral(8) ctVlanClassifyDataVal: 0x868d0000 ctVlanClassifyDataMask: 0x00000fff Again there are contextual implications for this leaf depending upon the value of ctVlanClassifyDataMeaning. Not all types will use the mask, and others will impose restrictions. This value should however be a true indication of the masking operation. In other words, data types that don't use a mask should only allow a value of zero, indicating that all data bits are significant in the comparison. The specific restrictions of each type should be spelled out in the comments for that type. Illegal values should not be allowed." ::= { ctVlanClassifyEntry 4 } ctVlanClassifyIngressList OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-create STATUS current DESCRIPTION "The set of ports on which this classification rule applies. Classification occurs on ingress. An agent implementation should allow a set operation of this object to create a row if it does not exist." DEFVAL { '0000'H } ::= { ctVlanClassifyEntry 5 } ctVlanClassifyRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "This object provides both control and status for the associated conceptual row in the table. Rows can be created in two ways. createAndGo - The specified row will be created and activated if the instance is allowable. If not, an inconsistentValue exception will be returned and the row will not be created. This provides the most optimal method of creating an active row, but provides the user no explanation if the row cannot be created. createAndWait - The specified row will be created and put in the notInService state if the instance is allowable. A subsequent activation of this row will bring it into the active state. If the instance is not allowable, the row will be created and put in the notReady state. A subsequent activation of this row will fail. Since the inappropriate information is always contained in the indexing leaves, activation will never succeed and the row should be removed by the management station. When a row is in the notReady state, the ctVlanClassifyRowInfo may be retrieved to obtain a plain English explanation of why this row cannot be activated. createAndWait is the preferred method for this reason. Both methods described above leave ctVlanClassifyIngressList in it's default state, requiring an additional set operation in order to modify it. An even more optimal twist on the createAndWait method is to set the ctVlanClassifyIngressList to it's desired value as a method for row creation. This will essentially cause an implicit createAndWait since it too will leave the row in either the notInService or notReady state. This leaves only activation or error analysis as the last step. Any rows left in the notReady or notInService state for more than 5 minutes should be automatically removed by the agent implementation." ::= { ctVlanClassifyEntry 6 } ctVlanClassifyRowInfo OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object provides info about this row in the form of an ASCII string, suitable for display purposes. The intended purpose of this object is to provide an 'agent-specific' explanation as to why the ctVlanClassifyRowStatus for this conceptual row is in the 'notReady' state. A management station should read this object and display it to the user in this case. A conceptual row that does not fall into this category may simply return a single NULL, but may also provide any useful info of its choice. A management station may attempt to display such info if it so chooses, but is under no burden to do so." ::= { ctVlanClassifyEntry 7 } -- ------------------------------------------------------------- -- Supported Ability Table -- ------------------------------------------------------------- ctVlanClassifyAbilityTable OBJECT-TYPE SYNTAX SEQUENCE OF CtVlanClassifyAbilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table containing information for each of the VLAN classification types. Types for which there is no corresponding row are not supported by this device." ::= { ctVlanClassifyObjects 5 } ctVlanClassifyAbilityEntry OBJECT-TYPE SYNTAX CtVlanClassifyAbilityEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a particular entry of ctVlanClassifyAbilityTable." INDEX { ctVlanClassifyAbility } ::= { ctVlanClassifyAbilityTable 1 } CtVlanClassifyAbilityEntry ::= SEQUENCE { ctVlanClassifyAbility CtVlanClassifyType, ctVlanClassifyPorts PortList, ctVlanClassifyActionStatus INTEGER } ctVlanClassifyAbility OBJECT-TYPE SYNTAX CtVlanClassifyType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The VLAN classification type associated with this entry." ::= { ctVlanClassifyAbilityEntry 1 } ctVlanClassifyPorts OBJECT-TYPE SYNTAX PortList MAX-ACCESS read-only STATUS current DESCRIPTION "The set of ports on which the classification type specified by ctVlanClassifyAbility is supported." ::= { ctVlanClassifyAbilityEntry 2 } ctVlanClassifyActionStatus OBJECT-TYPE SYNTAX INTEGER { forwardNoFrames(1), forwardAllFrames(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The action taken for all frames which apply this entry's associated classification rule. When this object is forwardNoFrames(1), the device will drop all frames which apply this classification rule. When this object is forwardAllFrames(2), the device will forward all applicable frames to this classification entry's VLAN." ::= { ctVlanClassifyAbilityEntry 3 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- ctVlanClassifyConformance OBJECT IDENTIFIER ::= { ctVlanClassify 2 } ctVlanClassifyGroups OBJECT IDENTIFIER ::= { ctVlanClassifyConformance 1 } ctVlanClassifyCompliances OBJECT IDENTIFIER ::= { ctVlanClassifyConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- ctVlanClassifyBaseGroup OBJECT-GROUP OBJECTS { ctVlanClassifyStatus, ctVlanClassifyMaxEntries, ctVlanClassifyNumEntries, ctVlanClassifyIngressList, ctVlanClassifyRowStatus, ctVlanClassifyRowInfo, ctVlanClassifyPorts, ctVlanClassifyActionStatus } STATUS current DESCRIPTION "A collection of objects providing device level control and status information for VLAN classification." ::= { ctVlanClassifyGroups 1 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- ctVlanClassifyCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for devices that support VLAN classification." MODULE MANDATORY-GROUPS { ctVlanClassifyBaseGroup } ::= { ctVlanClassifyCompliances 1 } END