CTRON-SFPS-L4SS-MIB DEFINITIONS ::= BEGIN -- sfps-l4ss.mib -- Revision: 0.0.06 -- Date: June 25, 1999 -- -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for the -- Layer 4 Smart Switch (L4SS). -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright October 93 Cabletron Systems -- IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString, PhysAddress FROM RFC1213-MIB IpAddress, Counter, TimeTicks FROM RFC1155-SMI -- These Objects are defined in the file sfps-inc.mib.txt switchSFPS FROM CTRON-SFPS-INCLUDE-MIB; -- New SFPS Switch Group. sfpsL4SS OBJECT IDENTIFIER ::= { switchSFPS 6 } -- The SFPS Layer 4 SmartSwitch Groups. sfpsL4CP OBJECT IDENTIFIER ::= { sfpsL4SS 1 } sfpsL4CDR OBJECT IDENTIFIER ::= { sfpsL4SS 2 } l4cpStats OBJECT IDENTIFIER ::= { sfpsL4CP 1 } l4cpConfig OBJECT IDENTIFIER ::= { sfpsL4CP 2 } l4cpActions OBJECT IDENTIFIER ::= { sfpsL4CP 3 } l4cdrStats OBJECT IDENTIFIER ::= { sfpsL4CDR 1 } l4cdrConfig OBJECT IDENTIFIER ::= { sfpsL4CDR 2 } l4cdrActions OBJECT IDENTIFIER ::= { sfpsL4CDR 3 } -- Textual Conventions HexInteger ::= INTEGER -- display this integer in hex format SfpsAddress ::= OCTET STRING (SIZE (6)) -- this will map to a MAC address -- SFPS L4CP Scalars sfpsL4CPDisableTCPAckCheck OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This variable indicates whether or not TCP segments whose ACK bit is off are allowed to use an existing flow table entry. When set to 2, a TCP segment whose ACK bit is off is always treated as an exception packet. This variable takes effect immediately, and its value is peristent." ::= { l4cpConfig 1 } -- SFPS FLOW TABLE sfpsL4CPFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CPFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table describes each conversation between a pair or Layer 3 or Layer 4 endpoints." ::= { sfpsL4CP 4 } sfpsL4CPFlowEntry OBJECT-TYPE SYNTAX SfpsL4CPFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains statistics and information for a pair of Layer 3 or Layer 4 endpoints." INDEX { sfpsL4CPFlowCnxIndex, sfpsL4CPFlowSecL3Address, sfpsL4CPFlowPrimL3Address, sfpsL4CPFlowSubprotocol, sfpsL4CPFlowSecMatchAnyDyn, sfpsL4CPFlowPrimMatchAnyDyn, sfpsL4CPFlowSecProtPort, sfpsL4CPFlowPrimProtPort } ::= { sfpsL4CPFlowTable 1 } SfpsL4CPFlowEntry ::= SEQUENCE { sfpsL4CPFlowCnxIndex INTEGER, sfpsL4CPFlowSecL3Address DisplayString, sfpsL4CPFlowPrimL3Address DisplayString, sfpsL4CPFlowSubprotocol HexInteger, sfpsL4CPFlowSecMatchAnyDyn INTEGER, sfpsL4CPFlowPrimMatchAnyDyn INTEGER, sfpsL4CPFlowSecProtPort INTEGER, sfpsL4CPFlowPrimProtPort INTEGER, sfpsL4CPFlowSecSubstApplies INTEGER, sfpsL4CPFlowPrimSubstApplies INTEGER, sfpsL4CPFlowSecInPkts Counter, sfpsL4CPFlowSecInOctets Counter, sfpsL4CPFlowPrimInPkts Counter, sfpsL4CPFlowPrimInOctets Counter, sfpsL4CPFlowFlowAge TimeTicks, sfpsL4CPFlowFlowLastUse TimeTicks, sfpsL4CPFlowID INTEGER } sfpsL4CPFlowCnxIndex OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "Index (1-based) of the SFPSGAPI connection table entry to which this flow belongs." ::= { sfpsL4CPFlowEntry 1 } sfpsL4CPFlowSecL3Address OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 address of the secondary endpoint for this flow. The secondary endpoint is the one having the higher MAC address." ::= { sfpsL4CPFlowEntry 2 } sfpsL4CPFlowPrimL3Address OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 address of the primary endpoint for this flow. The primary endpoint is the one having the lower MAC address." ::= { sfpsL4CPFlowEntry 3 } sfpsL4CPFlowSubprotocol OBJECT-TYPE SYNTAX HexInteger(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "This value identifies the Layer 4 protocol. It corresponds to the IP 'Protocol' field as described in the 'Assigned Numbers' RFC." ::= { sfpsL4CPFlowEntry 4 } sfpsL4CPFlowSecMatchAnyDyn OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the secondary endpoint should be treated as a wildcard, able to match any port number above 1023." ::= { sfpsL4CPFlowEntry 5 } sfpsL4CPFlowPrimMatchAnyDyn OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the primary endpoint should be treated as a wildcard, able to match any port number above 1023." ::= { sfpsL4CPFlowEntry 6 } sfpsL4CPFlowSecProtPort OBJECT-TYPE SYNTAX INTEGER(0..'FFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "If this is a TCP or UDP entry, this value indicates the protocol port number of the secondary endpoint. Otherwise, this field is zero." ::= { sfpsL4CPFlowEntry 7 } sfpsL4CPFlowPrimProtPort OBJECT-TYPE SYNTAX INTEGER(0..'FFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "If this is a TCP or UDP entry, this value indicates the protocol port number of the primary endpoint. Otherwise, this field is zero." ::= { sfpsL4CPFlowEntry 8 } sfpsL4CPFlowSecSubstApplies OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication of whether or not MAC address substitution applies to the secondary endpoint for this flow." ::= { sfpsL4CPFlowEntry 9 } sfpsL4CPFlowPrimSubstApplies OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indication of whether or not MAC address substitution applies to the primary endpoint for this flow." ::= { sfpsL4CPFlowEntry 10 } sfpsL4CPFlowSecInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of packets transmitted from primary to secondary." ::= { sfpsL4CPFlowEntry 11 } sfpsL4CPFlowSecInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets transmitted from primary to secondary." ::= { sfpsL4CPFlowEntry 12 } sfpsL4CPFlowPrimInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of packets transmitted from secondary to primary." ::= { sfpsL4CPFlowEntry 13 } sfpsL4CPFlowPrimInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "Count of octets transmitted from secondary to primary." ::= { sfpsL4CPFlowEntry 14 } sfpsL4CPFlowFlowAge OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time elapsed since this entry was created." ::= { sfpsL4CPFlowEntry 15 } sfpsL4CPFlowFlowLastUse OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time elapsed since this entry was last used to send data." ::= { sfpsL4CPFlowEntry 16 } sfpsL4CPFlowID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Call Detail Recording flow ID for this flow, or zero if CDR is not active for the flow." ::= { sfpsL4CPFlowEntry 17 } -- SFPS MAC ADDRESS SUBSTITUTION TABLE sfpsL4CPMACAddrSubTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CPMACAddrSubEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table provides the ability to override the default gateway for specific routes." ::= { sfpsL4CP 5 } sfpsL4CPMACAddrSubEntry OBJECT-TYPE SYNTAX SfpsL4CPMACAddrSubEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the MAC address substitution information associated with a specific destination IP address." INDEX { sfpsL4CPMACAddrSubDestIP } ::= { sfpsL4CPMACAddrSubTable 1 } SfpsL4CPMACAddrSubEntry ::= SEQUENCE { sfpsL4CPMACAddrSubDestIP IpAddress, sfpsL4CPMACAddrSubNextHopMAC PhysAddress, sfpsL4CPMACAddrSubRefCount INTEGER } sfpsL4CPMACAddrSubDestIP OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "Destination IP address for this route" ::= { sfpsL4CPMACAddrSubEntry 1 } sfpsL4CPMACAddrSubNextHopMAC OBJECT-TYPE SYNTAX PhysAddress ACCESS read-only STATUS mandatory DESCRIPTION "The next-hop MAC address to use for this route." ::= { sfpsL4CPMACAddrSubEntry 2 } sfpsL4CPMACAddrSubRefCount OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "The number of flow table entries that reference this entry." ::= { sfpsL4CPMACAddrSubEntry 3 } -- SFPS NETWORK ADDRESS SUBSTITUTION TABLE sfpsL4CPNetAddrUserTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CPNetAddrUserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table associates user information with network addresses." ::= { sfpsL4CP 7 } sfpsL4CPNetAddrUserEntry OBJECT-TYPE SYNTAX SfpsL4CPNetAddrUserEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the user information associated with a specific network address." INDEX { sfpsL4CPNetAddrUserProtocol, sfpsL4CPNetAddrUserNetAddr } ::= { sfpsL4CPNetAddrUserTable 1 } SfpsL4CPNetAddrUserEntry ::= SEQUENCE { sfpsL4CPNetAddrUserProtocol INTEGER, sfpsL4CPNetAddrUserNetAddr DisplayString, sfpsL4CPNetAddrUserLoginID INTEGER, sfpsL4CPNetAddrUserUserID INTEGER, sfpsL4CPNetAddrUserUserName DisplayString } sfpsL4CPNetAddrUserProtocol OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "The network-layer protocol associated with this entry. Values correspond to the 'aoAddressTag' enumeration (see aoproperties.h)." ::= { sfpsL4CPNetAddrUserEntry 1 } sfpsL4CPNetAddrUserNetAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The network-layer address associated with this entry." ::= { sfpsL4CPNetAddrUserEntry 2 } sfpsL4CPNetAddrUserLoginID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The login ID from CSM's LoginOID. Set to zero if no user is logged into the address." ::= { sfpsL4CPNetAddrUserEntry 3 } sfpsL4CPNetAddrUserUserID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The object ID from CSM's UserOID." ::= { sfpsL4CPNetAddrUserEntry 4 } sfpsL4CPNetAddrUserUserName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user name associated with this entry." ::= { sfpsL4CPNetAddrUserEntry 5 } -- SFPS IP ROUTE TABLE sfpsL4CPIPRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CPIPRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table associates IP routes (subnets) with devices." ::= { sfpsL4CP 8 } sfpsL4CPIPRouteEntry OBJECT-TYPE SYNTAX SfpsL4CPIPRouteEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains the IP route information associated with a specific device." INDEX { sfpsL4CPIPRouteSubnetMask, sfpsL4CPIPRouteSubnet } ::= { sfpsL4CPIPRouteTable 1 } SfpsL4CPIPRouteEntry ::= SEQUENCE { sfpsL4CPIPRouteSubnetMask IpAddress, sfpsL4CPIPRouteSubnet IpAddress, sfpsL4CPIPRouteRouteID INTEGER, sfpsL4CPIPRouteRouteSubsystem INTEGER, sfpsL4CPIPRouteDeviceID INTEGER, sfpsL4CPIPRouteDeviceName DisplayString, sfpsL4CPIPRouteMACAddress SfpsAddress, sfpsL4CPIPRouteMetric INTEGER, sfpsL4CPIPRouteCallable INTEGER } sfpsL4CPIPRouteSubnetMask OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The subnet mask associated with this route." ::= { sfpsL4CPIPRouteEntry 1 } sfpsL4CPIPRouteSubnet OBJECT-TYPE SYNTAX IpAddress ACCESS read-only STATUS mandatory DESCRIPTION "The destination subnet of this route." ::= { sfpsL4CPIPRouteEntry 2 } sfpsL4CPIPRouteRouteID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The object ID from CSM's RouteOID." ::= { sfpsL4CPIPRouteEntry 3 } sfpsL4CPIPRouteRouteSubsystem OBJECT-TYPE SYNTAX INTEGER { local(1), remote(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates type of device route." ::= { sfpsL4CPIPRouteEntry 4 } sfpsL4CPIPRouteDeviceID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The object ID from CSM's DeviceOID." ::= { sfpsL4CPIPRouteEntry 5 } sfpsL4CPIPRouteDeviceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The device name for this route." ::= { sfpsL4CPIPRouteEntry 6 } sfpsL4CPIPRouteMACAddress OBJECT-TYPE SYNTAX SfpsAddress ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address of the device for this route." ::= { sfpsL4CPIPRouteEntry 7 } sfpsL4CPIPRouteMetric OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The metric associated with this route." ::= { sfpsL4CPIPRouteEntry 8 } sfpsL4CPIPRouteCallable OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not the device associated with this route is callable for IP." ::= { sfpsL4CPIPRouteEntry 9 } -- SFPS PORT TABLE sfpsL4CPPortTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CPPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists the attributes of an access servers ports." ::= { sfpsL4CP 9 } sfpsL4CPPortEntry OBJECT-TYPE SYNTAX SfpsL4CPPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains information about one of this access server's ports." INDEX { sfpsL4CPPortNum } ::= { sfpsL4CPPortTable 1 } SfpsL4CPPortEntry ::= SEQUENCE { sfpsL4CPPortNum INTEGER, sfpsL4CPPortID INTEGER, sfpsL4CPPortApplyPolicyIn INTEGER, sfpsL4CPPortApplyPolicyOut INTEGER, sfpsL4CPPortDefaultUserID INTEGER, sfpsL4CPPortDefaultUserName DisplayString } sfpsL4CPPortNum OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "The logical port number of this port." ::= { sfpsL4CPPortEntry 1 } sfpsL4CPPortID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The last four octets of CSM's PortOID for this port." ::= { sfpsL4CPPortEntry 2 } sfpsL4CPPortApplyPolicyIn OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not access policies are to be applied to packets arriving at this port." ::= { sfpsL4CPPortEntry 3 } sfpsL4CPPortApplyPolicyOut OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not access policies are to be applied to packets sent out this port." ::= { sfpsL4CPPortEntry 4 } sfpsL4CPPortDefaultUserID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The last four octets of CSM's UserOID for the default userid for this port." ::= { sfpsL4CPPortEntry 5 } sfpsL4CPPortDefaultUserName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user name assigned to MAC addresses discovered on this port." ::= { sfpsL4CPPortEntry 6 } -- SFPS Callable Device Table sfpsL4CPCallableDeviceTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CPCallableDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists the attributes of a callable device." ::= { sfpsL4CP 11 } sfpsL4CPCallableDeviceEntry OBJECT-TYPE SYNTAX SfpsL4CPCallableDeviceEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains information about one of this access server's ports." INDEX { sfpsL4CPCallableDeviceDeviceID } ::= { sfpsL4CPCallableDeviceTable 1 } SfpsL4CPCallableDeviceEntry ::= SEQUENCE { sfpsL4CPCallableDeviceDeviceID INTEGER, sfpsL4CPCallableDeviceDeviceName DisplayString, sfpsL4CPCallableDeviceDefaultUserName DisplayString } sfpsL4CPCallableDeviceDeviceID OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "The last four octets of CSM's DeviceOID for this callable device." ::= { sfpsL4CPCallableDeviceEntry 1 } sfpsL4CPCallableDeviceDeviceName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The default device name for this callable device." ::= { sfpsL4CPCallableDeviceEntry 2 } sfpsL4CPCallableDeviceDefaultUserName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The default user name for this callable device." ::= { sfpsL4CPCallableDeviceEntry 3 } -- SFPS Layer 4 Call Detail Recording Active Flow Table sfpsL4CDRActiveFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CDRActiveFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists the currently active flows that have Call Detail Recording enabled." ::= { sfpsL4CDR 4 } sfpsL4CDRActiveFlowEntry OBJECT-TYPE SYNTAX SfpsL4CDRActiveFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains information about one flow that has CDR enabled." INDEX { sfpsL4CDRActiveFlowFlowID } ::= { sfpsL4CDRActiveFlowTable 1 } SfpsL4CDRActiveFlowEntry ::= SEQUENCE { sfpsL4CDRActiveFlowFlowID INTEGER, sfpsL4CDRActiveFlowSubProtocol INTEGER, sfpsL4CDRActiveFlowEtherType INTEGER, sfpsL4CDRActiveFlowSourceUser DisplayString, sfpsL4CDRActiveFlowSourceMACAddr DisplayString, sfpsL4CDRActiveFlowSourceNetAddr DisplayString, sfpsL4CDRActiveFlowSourceProtocolPort INTEGER, sfpsL4CDRActiveFlowSourcePPRangeEnabled INTEGER, sfpsL4CDRActiveFlowSourceConnNumber INTEGER, sfpsL4CDRActiveFlowDestUser DisplayString, sfpsL4CDRActiveFlowDestMACAddr DisplayString, sfpsL4CDRActiveFlowDestNetAddr DisplayString, sfpsL4CDRActiveFlowDestProtocolPort INTEGER, sfpsL4CDRActiveFlowDestPPRangeEnabled INTEGER, sfpsL4CDRActiveFlowDestConnNumber INTEGER, sfpsL4CDRActiveFlowStartTime TimeTicks, sfpsL4CDRActiveFlowLastPktTime TimeTicks, sfpsL4CDRActiveFlowEndTime TimeTicks, sfpsL4CDRActiveFlowInOctets Counter, sfpsL4CDRActiveFlowOutOctets Counter, sfpsL4CDRActiveFlowInPkts Counter, sfpsL4CDRActiveFlowOutPkts Counter, sfpsL4CDRActiveFlowDemandAccessConnMade INTEGER, sfpsL4CDRActiveFlowFlowRecordState INTEGER } sfpsL4CDRActiveFlowFlowID OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "Flow ID for this flow." ::= { sfpsL4CDRActiveFlowEntry 1 } sfpsL4CDRActiveFlowSubProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero." ::= { sfpsL4CDRActiveFlowEntry 2 } sfpsL4CDRActiveFlowEtherType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC." ::= { sfpsL4CDRActiveFlowEntry 3 } sfpsL4CDRActiveFlowSourceUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user name associated with the source of the flow." ::= { sfpsL4CDRActiveFlowEntry 4 } sfpsL4CDRActiveFlowSourceMACAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address associated with the source of the flow." ::= { sfpsL4CDRActiveFlowEntry 5 } sfpsL4CDRActiveFlowSourceNetAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 address associated with the source of the flow." ::= { sfpsL4CDRActiveFlowEntry 6 } sfpsL4CDRActiveFlowSourceProtocolPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero." ::= { sfpsL4CDRActiveFlowEntry 7 } sfpsL4CDRActiveFlowSourcePPRangeEnabled OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created." ::= { sfpsL4CDRActiveFlowEntry 8 } sfpsL4CDRActiveFlowSourceConnNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The source connection number." ::= { sfpsL4CDRActiveFlowEntry 9 } sfpsL4CDRActiveFlowDestUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user name associated with the destination of the flow." ::= { sfpsL4CDRActiveFlowEntry 10 } sfpsL4CDRActiveFlowDestMACAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address associated with the destination of the flow." ::= { sfpsL4CDRActiveFlowEntry 11 } sfpsL4CDRActiveFlowDestNetAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 address associated with the destination of the flow." ::= { sfpsL4CDRActiveFlowEntry 12 } sfpsL4CDRActiveFlowDestProtocolPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero." ::= { sfpsL4CDRActiveFlowEntry 13 } sfpsL4CDRActiveFlowDestPPRangeEnabled OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created." ::= { sfpsL4CDRActiveFlowEntry 14 } sfpsL4CDRActiveFlowDestConnNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The destination connection number." ::= { sfpsL4CDRActiveFlowEntry 15 } sfpsL4CDRActiveFlowStartTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since this flow was created." ::= { sfpsL4CDRActiveFlowEntry 16 } sfpsL4CDRActiveFlowLastPktTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since the most recent packet was sent on this flow." ::= { sfpsL4CDRActiveFlowEntry 17 } sfpsL4CDRActiveFlowEndTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since this flow was terminated. This field is not meaningful for active flows." ::= { sfpsL4CDRActiveFlowEntry 18 } sfpsL4CDRActiveFlowInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets that have been sent from the destination to the source." ::= { sfpsL4CDRActiveFlowEntry 19 } sfpsL4CDRActiveFlowOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets that have been sent from the source to the destination." ::= { sfpsL4CDRActiveFlowEntry 20 } sfpsL4CDRActiveFlowInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that have been sent from the destination to the source." ::= { sfpsL4CDRActiveFlowEntry 21 } sfpsL4CDRActiveFlowOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that have been sent from the source to the destination." ::= { sfpsL4CDRActiveFlowEntry 22 } sfpsL4CDRActiveFlowDemandAccessConnMade OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not a demand access connection had to be made for this flow." ::= { sfpsL4CDRActiveFlowEntry 23 } sfpsL4CDRActiveFlowFlowRecordState OBJECT-TYPE SYNTAX INTEGER { initialized(1), active(2), terminated(3), invalid(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of the flow record." ::= { sfpsL4CDRActiveFlowEntry 24 } -- SFPS Layer 4 Call Detail Recording Terminated Flow Table sfpsL4CDRTermedFlowTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CDRTermedFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists the terminated flows that had Call Detail Recording enabled." ::= { sfpsL4CDR 5 } sfpsL4CDRTermedFlowEntry OBJECT-TYPE SYNTAX SfpsL4CDRTermedFlowEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains information about one flow that had CDR enabled." INDEX { sfpsL4CDRTermedFlowFlowID } ::= { sfpsL4CDRTermedFlowTable 1 } SfpsL4CDRTermedFlowEntry ::= SEQUENCE { sfpsL4CDRTermedFlowFlowID INTEGER, sfpsL4CDRTermedFlowSubProtocol INTEGER, sfpsL4CDRTermedFlowEtherType INTEGER, sfpsL4CDRTermedFlowSourceUser DisplayString, sfpsL4CDRTermedFlowSourceMACAddr DisplayString, sfpsL4CDRTermedFlowSourceNetAddr DisplayString, sfpsL4CDRTermedFlowSourceProtocolPort INTEGER, sfpsL4CDRTermedFlowSourcePPRangeEnabled INTEGER, sfpsL4CDRTermedFlowSourceConnNumber INTEGER, sfpsL4CDRTermedFlowDestUser DisplayString, sfpsL4CDRTermedFlowDestMACAddr DisplayString, sfpsL4CDRTermedFlowDestNetAddr DisplayString, sfpsL4CDRTermedFlowDestProtocolPort INTEGER, sfpsL4CDRTermedFlowDestPPRangeEnabled INTEGER, sfpsL4CDRTermedFlowDestConnNumber INTEGER, sfpsL4CDRTermedFlowStartTime TimeTicks, sfpsL4CDRTermedFlowLastPktTime TimeTicks, sfpsL4CDRTermedFlowEndTime TimeTicks, sfpsL4CDRTermedFlowInOctets Counter, sfpsL4CDRTermedFlowOutOctets Counter, sfpsL4CDRTermedFlowInPkts Counter, sfpsL4CDRTermedFlowOutPkts Counter, sfpsL4CDRTermedFlowDemandAccessConnMade INTEGER, sfpsL4CDRTermedFlowFlowRecordState INTEGER } sfpsL4CDRTermedFlowFlowID OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "Flow ID for this flow." ::= { sfpsL4CDRTermedFlowEntry 1 } sfpsL4CDRTermedFlowSubProtocol OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero." ::= { sfpsL4CDRTermedFlowEntry 2 } sfpsL4CDRTermedFlowEtherType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC." ::= { sfpsL4CDRTermedFlowEntry 3 } sfpsL4CDRTermedFlowSourceUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user name associated with the source of the flow." ::= { sfpsL4CDRTermedFlowEntry 4 } sfpsL4CDRTermedFlowSourceMACAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address associated with the source of the flow." ::= { sfpsL4CDRTermedFlowEntry 5 } sfpsL4CDRTermedFlowSourceNetAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 address associated with the source of the flow." ::= { sfpsL4CDRTermedFlowEntry 6 } sfpsL4CDRTermedFlowSourceProtocolPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero." ::= { sfpsL4CDRTermedFlowEntry 7 } sfpsL4CDRTermedFlowSourcePPRangeEnabled OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created." ::= { sfpsL4CDRTermedFlowEntry 8 } sfpsL4CDRTermedFlowSourceConnNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The source connection number." ::= { sfpsL4CDRTermedFlowEntry 9 } sfpsL4CDRTermedFlowDestUser OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The user name associated with the destination of the flow." ::= { sfpsL4CDRTermedFlowEntry 10 } sfpsL4CDRTermedFlowDestMACAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The MAC address associated with the destination of the flow." ::= { sfpsL4CDRTermedFlowEntry 11 } sfpsL4CDRTermedFlowDestNetAddr OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Layer 3 address associated with the destination of the flow." ::= { sfpsL4CDRTermedFlowEntry 12 } sfpsL4CDRTermedFlowDestProtocolPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero." ::= { sfpsL4CDRTermedFlowEntry 13 } sfpsL4CDRTermedFlowDestPPRangeEnabled OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created." ::= { sfpsL4CDRTermedFlowEntry 14 } sfpsL4CDRTermedFlowDestConnNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The destination connection number." ::= { sfpsL4CDRTermedFlowEntry 15 } sfpsL4CDRTermedFlowStartTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since this flow was created." ::= { sfpsL4CDRTermedFlowEntry 16 } sfpsL4CDRTermedFlowLastPktTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since the most recent packet was sent on this flow." ::= { sfpsL4CDRTermedFlowEntry 17 } sfpsL4CDRTermedFlowEndTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "The time elapsed since this flow was terminated." ::= { sfpsL4CDRTermedFlowEntry 18 } sfpsL4CDRTermedFlowInOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets that have been sent from the destination to the source." ::= { sfpsL4CDRTermedFlowEntry 19 } sfpsL4CDRTermedFlowOutOctets OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of octets that have been sent from the source to the destination." ::= { sfpsL4CDRTermedFlowEntry 20 } sfpsL4CDRTermedFlowInPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that have been sent from the destination to the source." ::= { sfpsL4CDRTermedFlowEntry 21 } sfpsL4CDRTermedFlowOutPkts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of packets that have been sent from the source to the destination." ::= { sfpsL4CDRTermedFlowEntry 22 } sfpsL4CDRTermedFlowDemandAccessConnMade OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates whether or not a demand access connection had to be made for this flow." ::= { sfpsL4CDRTermedFlowEntry 23 } sfpsL4CDRTermedFlowFlowRecordState OBJECT-TYPE SYNTAX INTEGER { initialized(1), active(2), terminated(3), invalid(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of the flow record." ::= { sfpsL4CDRTermedFlowEntry 24 } -- SFPS Layer 4 Call Detail Recording Flow Index Table sfpsL4CDRFlowIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsL4CDRFlowIndexEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table lists the current flows that have Call Detail Recording enabled." ::= { sfpsL4CDR 6 } sfpsL4CDRFlowIndexEntry OBJECT-TYPE SYNTAX SfpsL4CDRFlowIndexEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry contains information about one flow that has CDR enabled." INDEX { sfpsL4CDRFlowIndexFlowID } ::= { sfpsL4CDRFlowIndexTable 1 } SfpsL4CDRFlowIndexEntry ::= SEQUENCE { sfpsL4CDRFlowIndexFlowID INTEGER, sfpsL4CDRFlowIndexSFPSFlowTblIndex INTEGER, sfpsL4CDRFlowIndexSFlowStatsPtr INTEGER, sfpsL4CDRFlowIndexStaticFlowInfoPtr INTEGER, sfpsL4CDRFlowIndexFlowTblEntryPtr INTEGER, sfpsL4CDRFlowIndexFlowState INTEGER } sfpsL4CDRFlowIndexFlowID OBJECT-TYPE SYNTAX INTEGER(0..'7FFFFFFF'h) ACCESS read-only STATUS mandatory DESCRIPTION "Flow ID for this flow." ::= { sfpsL4CDRFlowIndexEntry 1 } sfpsL4CDRFlowIndexSFPSFlowTblIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Index of the SFPS Flow Table entry (1-based) that corresponds to this flow." ::= { sfpsL4CDRFlowIndexEntry 2 } sfpsL4CDRFlowIndexSFlowStatsPtr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Pointer to the SFlowStats object for this flow." ::= { sfpsL4CDRFlowIndexEntry 3 } sfpsL4CDRFlowIndexStaticFlowInfoPtr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Pointer to the L4CDRStaticFlowInfo object for this flow." ::= { sfpsL4CDRFlowIndexEntry 4 } sfpsL4CDRFlowIndexFlowTblEntryPtr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The flow table entry pointer for this flow." ::= { sfpsL4CDRFlowIndexEntry 5 } sfpsL4CDRFlowIndexFlowState OBJECT-TYPE SYNTAX INTEGER { initialized(1), active(2), terminated(3), invalid(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Indicates the current state of the flow index record." ::= { sfpsL4CDRFlowIndexEntry 6 } END