CTRON-SFPS-BINDERY-MIB DEFINITIONS ::= BEGIN -- sfps-bindery-mib.txt -- Revision: 0.0.04 -- -- Part Number: -- Date: April 19, 1996 -- -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- enterprise specific Fast Packet Switching Services MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright October 93 Cabletron Systems -- IMPORTS OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB -- enterprises, -- IpAddress, -- Counter, Gauge, TimeTicks FROM RFC1155-SMI -- These Objects are defined in the file sfps-inc.mib.txt sfpsAgentConfig FROM CTRON-SFPS-INCLUDE-MIB; -- Textual Conventions --SfpsSwitchInstance ::= INTEGER -- this will map to chassis.module index value --SfpsSwitchPort ::= INTEGER -- this will map to chassis.module.portgroup.portsubgroup.port index value --SfpsAddress ::= OCTET STRING (SIZE (6)) -- this will map to a MAC address HexInteger ::= INTEGER -- display this integer in hex format -- -- SFPS Switch Agent Bindery Group -- This group contains the objects that pertain to the SFPS Bindery. sfpsAgentBinderyConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF SfpsAgentBinderyConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Soft Binding is implemented through a few new base classes, a small army of instances of the base classes plus a bindery table to tie the whole mess together." ::= { sfpsAgentConfig 1 } sfpsAgentBinderyConfigEntry OBJECT-TYPE SYNTAX SfpsAgentBinderyConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Each entry specifies the configuration for the bindery component." INDEX {sfpsAgentBinderyConfigHashLeaf,sfpsAgentBinderyConfigHashIndex } ::= { sfpsAgentBinderyConfigTable 1 } SfpsAgentBinderyConfigEntry ::= SEQUENCE { sfpsAgentBinderyConfigHashLeaf HexInteger, sfpsAgentBinderyConfigHashIndex INTEGER, sfpsAgentBinderyConfigName DisplayString, sfpsAgentBinderyConfigType DisplayString, sfpsAgentBinderyConfigOperStatus INTEGER, sfpsAgentBinderyConfigAdminStatus INTEGER, sfpsAgentBinderyConfigStatusTime TimeTicks, sfpsAgentBinderyConfigNVStatus INTEGER } sfpsAgentBinderyConfigHashLeaf OBJECT-TYPE SYNTAX HexInteger ACCESS read-only STATUS mandatory DESCRIPTION "NO hash, part of instance key." ::= { sfpsAgentBinderyConfigEntry 1 } sfpsAgentBinderyConfigHashIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "NO Bucket index, part of instance key." ::= { sfpsAgentBinderyConfigEntry 2 } sfpsAgentBinderyConfigName OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Elements Name." ::= { sfpsAgentBinderyConfigEntry 3 } sfpsAgentBinderyConfigType OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "Type of element." ::= { sfpsAgentBinderyConfigEntry 4 } sfpsAgentBinderyConfigOperStatus OBJECT-TYPE SYNTAX INTEGER { kStatusRunning(1), -- all is well kStatusHalted(2), -- admin disabled kStatusPending(3), -- Trying to run, not there yet kStatusFaulted(4), -- Internal error, never will recover kStatusNotStarted(5) -- Not fully started yet } ACCESS read-only STATUS mandatory DESCRIPTION "Operational state of the entry." ::= { sfpsAgentBinderyConfigEntry 5 } sfpsAgentBinderyConfigAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- Not running or stopped disable(2), -- Please stop enable(3) -- Go } ACCESS read-only STATUS mandatory DESCRIPTION "Administrative state of the entry." ::= { sfpsAgentBinderyConfigEntry 6 } sfpsAgentBinderyConfigStatusTime OBJECT-TYPE SYNTAX TimeTicks ACCESS read-only STATUS mandatory DESCRIPTION "Time tick of last OperStatus change." ::= { sfpsAgentBinderyConfigEntry 7 } sfpsAgentBinderyConfigNVStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- Not running or stopped disable(2), -- Please stop enable(3), -- Go unset(4) } ACCESS read-write STATUS mandatory DESCRIPTION "Administrative state of the entry." ::= { sfpsAgentBinderyConfigEntry 8 } --- Bindery API sfpsAgentBinderyAPI OBJECT IDENTIFIER ::= { sfpsAgentConfig 2 } sfpsAgentBinderyAPIVerb OBJECT-TYPE SYNTAX INTEGER { getStatus(1), nextElem(2), disable(3), disableInNvram(4), enable(5), enableInNvram(6), clear(7), clearAll(8) } ACCESS read-write STATUS mandatory DESCRIPTION "The BinderyAPI is a flat MIB that can be used to enable/disable Bindery components, and to save the enable/disable info into Nvram. The next reboot/reset, each SFPSElement will check the NvramStatus and not start if disabled." ::= { sfpsAgentBinderyAPI 1 } sfpsAgentBinderyAPIElementName OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS mandatory DESCRIPTION "Enter in the dotted notation Bindery ID (xxx.yyy.zzz) of the SFPSElement you wish to perform the action." ::= { sfpsAgentBinderyAPI 2 } sfpsAgentBinderyAPINVStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3), unset(4), invalid(5) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the Current Admin Status of this Element in Nvram." ::= { sfpsAgentBinderyAPI 3 } sfpsAgentBinderyAPIAdminStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3), invalid(4) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the Current AdminStatus of the SFPSElement." ::= { sfpsAgentBinderyAPI 4 } sfpsAgentBinderyAPIOperStatus OBJECT-TYPE SYNTAX INTEGER { running(1), halted(2), pending(3), faulted(4), notStarted(5), invalid(6) } ACCESS read-only STATUS mandatory DESCRIPTION "Displays the Current OperStatus of the SFPSElement." ::= { sfpsAgentBinderyAPI 5 } sfpsAgentBinderyAPINvSet OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SFPSElements stored in NVRAM for persistence." ::= { sfpsAgentBinderyAPI 6 } sfpsAgentBinderyAPINvTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Total number of SFPSElements allocated in NVRAM. The switch will always allocate enough space in NVRAM for the number of elements. That is, NvTotal will always be greater than or equal to NvSet." ::= { sfpsAgentBinderyAPI 7 } sfpsAgentBinderyAPIDefaultStatus OBJECT-TYPE SYNTAX INTEGER { other(1), disable(2), enable(3), unset(4), invalid(5) } ACCESS read-only STATUS mandatory DESCRIPTION "" ::= { sfpsAgentBinderyAPI 8 } END