CTRON-ETWMIM-MIB DEFINITIONS ::= BEGIN -- ETWMIM-MIB -- Revision: 0.02.00 -- Part Number: 2170991 -- Date: August 14, 1995 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for part -- of the naming tree below: -- -- cabletron { enterprises 52 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright August 95 Cabletron Systems -- -- IMPORTS OBJECT-TYPE FROM RFC-1212 ctPModuleETWMIM FROM CTRON-MIB-NAMES; etwDbExist OBJECT-TYPE SYNTAX INTEGER { exists(1), no-exists(2) } ACCESS read-only STATUS mandatory DESCRIPTION "Denotes whether a T1 daughter board is attached to the Etwmim card being managed" ::= { ctPModuleETWMIM 1 } etwDbEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object exists if etwDbExist is 1. Setting this object to 1 will cause the WAN port to use the daughterboard T1 port. Setting this object to 2 will cause the WAN port to use the synchronous port" ::= { ctPModuleETWMIM 2 } etwDbFracToggle OBJECT-TYPE SYNTAX INTEGER { update-table(1), display-new(2), display-old(3), restore-old(4) } ACCESS read-write STATUS mandatory DESCRIPTION "This object exists if etwDbExist is 1. Setting this object to 1 will cause the T1 fractional table to be updated with the new values, as entered. Setting this object to 2, will cause the T1 fractional table to be the table as it is being entered. Setting this object to 3, will cause the T1 fractional table to be the table that is currently in use, regardless of any changes being entered. Setting this object to 4, will cause any changes that have been made to the fractional table since the last update-table to be deleted." REFERENCE "IETF RFC 1232" ::= { ctPModuleETWMIM 3 } etwFWRev OBJECT-TYPE SYNTAX OCTET STRING (SIZE(8)) ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the revision of firmware in the module. The format of the string is xx.xx.xx, where the first pair indicates version, and the second pair indicates revision." ::= { ctPModuleETWMIM 4 } etwHWRev OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Denotes the revision of hardware." ::= { ctPModuleETWMIM 5 } etwEpimEnabled OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This object gives the status of the EPIM port on the etwmim. A value of 1 indicates that the hardware has been set to use the Epim port for the ethernet connection. A value of 2 indicates that the hardware has been set to use the A channel for the ethernet connection" ::= { ctPModuleETWMIM 6 } etwEpimType OBJECT-TYPE SYNTAX OBJECT IDENTIFIER ACCESS read-only STATUS mandatory DESCRIPTION "Identifies the type of EPIM that is present in the EPIM slot. The value is allocated in the Ctron naming tree." ::= { ctPModuleETWMIM 7 } etwEpimLink OBJECT-TYPE SYNTAX INTEGER { link-established(1), link-not-established(2), link-unknown(3) } ACCESS read-only STATUS mandatory DESCRIPTION "This object will indicate whether a link is established on the EPIM link. A value of 1 indicates that a link is established. A value of 2 indicates that a link is not established. A value of 3 indicates that the status of the link is unknown or not valid for the type of Epim installed." ::= { ctPModuleETWMIM 8 } etwClearNvramOnBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When set to a 1, the system will clear all persistant objects, except for the download objects, from nvram on the next system boot" ::= { ctPModuleETWMIM 9 } END