CTRON-DOWNLOAD-MIB DEFINITIONS ::= BEGIN -- ctron-download-mib.txt -- Revision: 1.06.02 -- Part Number: 2170556-02 -- Date: February 2, 1999 -- Revised: "200308111858Z" - Mon Aug 11 18:58 GMT 2003 -- Enterasys Networks, Inc. -- 50 Minuteman Rd. -- Andover, MA 01801-1008 -- +1 978 684 1000 -- support@enterasys.com -- This module provides authoritative definitions for Cabletron's -- enterprise-specific download MIB. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright February 1999-2003 Cabletron Systems -- This MIB describes objects that are common to all Cabletron -- devices. IMPORTS NetworkAddress FROM RFC1155-SMI ctDownLoad FROM CTRON-MIB-NAMES DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- Textual convention -- DisplayString ::= OCTET STRING -- This data type is used to model textual information taken from -- the NVT ASCII character set. By convention, objects with this -- syntax are declared as having: -- -- SIZE (0..255) -- The commonDL group -- Implementation of this group is mandatory for systems -- that provide the ability to download firmware." ctDL OBJECT IDENTIFIER ::= { ctDownLoad 1 } ctDLForceOnBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "When set to a 1, the system will request a download during the next system restart. If no server is found and the current image in flash memory is valid, the system will boot using the flash-resident image." ::= { ctDL 1 } ctDLCommitRAMToFlash OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "When written with a 1, the boot software will erase flash memory, compress the downloaded code if necessary, and save the image into flash memory. Upon completion of this operation, the flash memory driver resets this object to 0, indicating completion of the programming operation." ::= { ctDL 2 } ctDLInitiateColdBoot OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "When written with a 1, the boot software initiates a system reboot. When written with a 2, the boot software initiates a soft reboot of the system. The soft reboot does not perform the Boot PROM Power-Up diagnostics. If only one form of reboot is supported initiate that reboot in both cases. A read always returns a 0." ::= { ctDL 3 } ctDLTFTPRequestHost OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS obsolete DESCRIPTION "The IP address of the TFTP server to be used when firmware is to be loaded across the network." ::= { ctDL 4 } ctDLTFTPRequest OBJECT-TYPE SYNTAX DisplayString ACCESS read-write STATUS obsolete DESCRIPTION "The filename requested of the server when firmware is to be loaded across the network." ::= { ctDL 5 } ctDLLastImageFilename OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The value of ctDLFileName during the last successful image download. This is the name of the file, on the TFTP server, that was download to become the current image." ::= { ctDL 6 } ctDLLastServerIPAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-only STATUS mandatory DESCRIPTION "The value of ctDLNetAddress during the last successful image download. This is the IP address of the TFTP server used to download the current image." ::= { ctDL 7 } ctDLFlashSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Denotes the size, in bytes, of flash memory contained on this module." ::= { ctDL 8 } ctDLFlashCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Denotes the number of times that flash memory has been reprogrammed. This value is initialized to 1, when the module is initially powered up." ::= { ctDL 9 } ctDLFirmwareBase OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Denotes the starting RAM address of the firmware." ::= { ctDL 10 } ctDLFirmwareTop OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Denotes the ending RAM address of firmware." ::= { ctDL 11 } ctDLFirmwareStart OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS obsolete DESCRIPTION "Denotes the RAM entry point of the firmware as established by the boot process." ::= { ctDL 12 } ctDLBootRev OBJECT-TYPE SYNTAX OCTET STRING (SIZE(9)) ACCESS read-only STATUS obsolete DESCRIPTION "Denotes the revision of boot firmware in the module. The first octet provides the version, and the second provides the revision." ::= { ctDL 13 } ctDLForceBootp OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS obsolete DESCRIPTION "When set to 1, this object forces the client to send a BOOTP request packet when rebooting. The client will make several attempts before timing out if a BOOTP server does not respond. This object remains set." ::= { ctDL 14 } ctDLServerName OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS obsolete DESCRIPTION "This OID is reserved for future use of the BOOTP server name. This field can be used when a client wants to get boot information from a particular BOOTP server." ::= { ctDL 15 } ctDLOnLineDownLoad OBJECT-TYPE SYNTAX INTEGER { normalOperation(1), forceDownLoad(2), forceDownLoadReset(3), downLoadConfiguration(4), upLoadConfiguration(5) } ACCESS read-write STATUS mandatory DESCRIPTION "During normal operation this object has the value of 1. By setting this object to a value of forceDownLoad(2) an image download via TFTP will be performed, ctDLNetAddress specifies the TFTP server and ctDLFileName specifies the file name of the image on the TFTP server. By setting this object to a value of forceDownLoadReset(3) an image download via TFTP will be performed, ctDLNetAddress specifies the TFTP server and ctDLFileName specifies the file name of the image on the TFTP server. A reset will be forced upon successful completion of the download. By setting this object to a value of downLoadConfiguration(4) the specified configuration file will be downloaded, verified, and, if valid, committed to NVRAM, if valid. A reset will be forced upon successful completion. ctDLNetAddress specifies the TFTP server and ctDLFileName specifies the name of the configuration file on the TFTP server. By setting this object to upLoadConfiguration(5), the contents of NVRAM will be uploaded via TFTP to the specified file on the specified TFTP server. ctDLNetAddress specifies the TFTP server and ctDLFileName specifies the name of the configuration file." ::= { ctDL 16 } ctDLOperStatus OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following unknown(2), normalOperation(3), downLoadActive(4), downLoadCompleteError(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This object reflects the status of the download code. normalOperation(3) - Indicates that either no download has been started, or that a download was started and has finished normally. downLoadActive(4) - indicates a download is currently in progress. downLoadCompleteError(5) - Indicates that a download was started but an error was detected." ::= { ctDL 17 } ctDLNetAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP Address of the TFTP server to be used for uploading and downloading configuration files and for downloading images." ::= { ctDL 18 } ctDLFileName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "The file name to be used to specify the image or configuration file on the TFTP server specified by ctDLNetAddress. This should be a complete path filename." ::= { ctDL 19 } ctDLErrorString OBJECT-TYPE SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "If the value of ctDLOperStatus is downloadCompleteError(5) then this object will provide a more complete description of the error. Otherwise this object will be the zero length string." ::= { ctDL 20 } ctDLTftpServerGatewayIPAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS obsolete DESCRIPTION "The IP address of the gateway/router which connects this SNMP agent to the TFTP server." ::= { ctDL 21 } ctDLBlockCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current TFTP block count of an active session. If no TFTP transfer is in progress, zero is returned." ::= { ctDL 22 } ctDLBootPartitionStatus OBJECT-TYPE SYNTAX INTEGER { good(1), bad(2), inProgress(3) } ACCESS read-only STATUS obsolete DESCRIPTION "Status of the boot partition or partitions. A value of good(1) indicates that all boot partitions contain a valid checksum. A value of bad(2) indicates that one or more boot partitions contain an invalid checksum and the the image was not able to fix the invalid boot partition. A value of inProgress(3) indicates that the image is attempting to fix an invalid boot partition and this status will change to either good(1) or bad(2)." ::= { ctDL 23 } END