CTRON-ALIAS-MIB DEFINITIONS ::= BEGIN -- ctron-alias-mib.txt -- -- Part Number: -- -- -- This module provides authoritative definitions for Enterasys -- Networks' Alias MIB. -- -- This module will be extended, as needed. -- Enterasys Networks reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Enterasys products. -- -- Copyright August, 1999-2003 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, Gauge32, Counter32, Unsigned32, TimeTicks FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, MacAddress, TruthValue FROM SNMPv2-TC SnmpAdminString FROM SNMP-FRAMEWORK-MIB InterfaceIndex FROM IF-MIB TimeFilter FROM RMON2-MIB VlanIndex FROM Q-BRIDGE-MIB EnabledStatus FROM P-BRIDGE-MIB ctAliasMib FROM CTRON-MIB-NAMES; cabletronAliasMib MODULE-IDENTITY LAST-UPDATED "200304281327Z" -- Mon Apr 28 13:27 GMT 2003 ORGANIZATION "Enterasys Networks, Inc" CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "This MIB module defines a portion of the MIB tree under the Enterasys enterprise OID. This branch defines Enterasys Networks' proprietary Node Alias feature. This MIB defines objects which can be used to discover end systems per port, and to map end system addresses to the layer 2 address of the port." REVISION "200304221339Z" -- Tue Apr 22 13:39 GMT 2003 DESCRIPTION "Added the ctAliasMacAddressTable and ctAliasProtocolAddressTable. Added the objects ctAliasEntryStatus and ctAliasEntryClearAll. Deprecated the object ctAliasMarkInactive." REVISION "200201301301Z" -- Wed Jan 30 13:01 GMT 2002 DESCRIPTION "Added the optional ctAliasConfigurationTable." REVISION "200201232056Z" -- Wed Jan 23 20:56 GMT 2002 DESCRIPTION "Added ctAliasAddressText leaf with the syntax of SnmpAdminString." REVISION "200201182022Z" -- Fri Jan 18 20:22 GMT 2002 DESCRIPTION "Added textual convention AliasAddress. Changed the syntax for ctAliasAddress from SnmpAdminString to AliasAddress. Added ranges to ctAliasReference and ctAliasID." REVISION "199909260000Z" DESCRIPTION "Moved the CabletronProtocolTC enumeration value unknown to unknown(0). Updated textual descriptions." REVISION "199909040000Z" DESCRIPTION "Changed removed the ctAliasProtocolDirLocalID. Updated units of conformance and compliance statements." REVISION "199908060000Z" DESCRIPTION "Changed object naming to be more cabletron-general. Changed indexing to simplify access." REVISION "199907280000Z" DESCRIPTION "The initial version of this MIB module" ::= { ctAliasMib 1 } -- Textual Conventions CabletronProtocolTC ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Identifies the type of protocol address." SYNTAX INTEGER { unknown(0), ip(1), apl(2), mac(3), hsrp(4), dhcps(5), dhcpc(6), bootps(7), bootpc(8), ospf(9), vrrp(10), ipx(11), xrip(12), xsap(13), xnlsp(14), ipx20(15), rtmp(16), netBios(17), nbt(18), n802q(19), bgp(20), rip(21), igrp(22), dec(23), bpdu(24), udp(25) } AliasAddress ::= TEXTUAL-CONVENTION DISPLAY-HINT "1x " STATUS current DESCRIPTION "Represents layer 3 or higher addresses." SYNTAX OCTET STRING (SIZE (0..32)) -- branches used in this MIB ctAlias OBJECT IDENTIFIER ::= { cabletronAliasMib 1 } -- Alias Table ctAliasTable OBJECT-TYPE SYNTAX SEQUENCE OF CtAliasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ctAliasTable contains information about the aliases known by the agent. This table is indexed using a unique and arbitrary ID and a TimeFilter to allow a management station to learn all alias entries that have been modified since time X. This table is NOT designed to do a single GET. This Table is designed for MIB Walks only. This table contains objects that map upper-layer network services and entities to the physical location of the associated port, and the MAC address of the associated end-system (node). All entries in this table are deleted when sysUpTime is reset to zero. This table allows for a time filtered view. It is useful for determining what has been modified in the Alias Table since a specified time. If a management station reads the ctAliasTable of an entity at time X, subsequent updates can be realized by performing get-next requests of this table to determine which entries have been modified since time X. Then the management station can use GET requests to retrieve only the records of interest from the Alias table. There is a delay between retrieving the Alias Reference values from this table, and a GET request to retrieve a modified row from the Alias table. The management station should be prepared for two possibilities: 1) the GET request may fail if the Alias table entry has been deleted during the delay, and 2) the entry may have been modified during the delay, so the modification time of the retrieved entry may differ from the modification time of the Delta entry. If the entry in the Alias Control table identified by ctAliasID is marked inactive by management request, and subsequently deleted to free resources, all corresponding entries in this table are also deleted. If the agent needs to free resources, it can delete entries from this table. It SHOULD first remove those which have been marked inactive in the ctAliasControlTable, then it SHOULD remove those entries with the oldest modification times." ::= { ctAlias 1 } ctAliasEntry OBJECT-TYPE SYNTAX CtAliasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information pertaining to the alias of a node." INDEX { ctAliasTimeFilter, ctAliasReference } ::= { ctAliasTable 1 } CtAliasEntry ::= SEQUENCE { ctAliasTimeFilter TimeFilter, ctAliasReference Integer32, ctAliasInterface InterfaceIndex, ctAliasMacAddress MacAddress, ctAliasVlanID VlanIndex, ctAliasProtocol CabletronProtocolTC, ctAliasAddress AliasAddress, ctAliasIsActive TruthValue, ctAliasAddressText SnmpAdminString } ctAliasTimeFilter OBJECT-TYPE SYNTAX TimeFilter MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of sysUpTime when this entry was last modified." ::= { ctAliasEntry 1 } ctAliasReference OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "An integer ID assigned by the agent. The value of this object is equal to an existing ctAliasID." ::= { ctAliasEntry 2 } ctAliasInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the interface on which this entry was discovered. The ifIndex is an 'external value' that identifies a physical component associated with the Alias entry. This object can be used to identify the physical location of the interface in the ifTable [RFC2863]. The possibility of ifIndex value re-assignment must be accommodated by a management application whenever the value of sysUpTime is reset to zero. Since ifIndex values in different 'naming scopes' are not related to one another, the interface to physical component associations are relative to the same logical entity within the agent. For more discussion of naming scopes, see the ENTITY-MIB [RFC2037]" ::= { ctAliasEntry 3 } ctAliasMacAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address associated with this alias. The TEXTUAL-CONVENTION MacAddress is defined in SNMPv2-TC as an 802 MAC address represented in 'canonical' order as defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first." ::= { ctAliasEntry 4 } ctAliasVlanID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID contained in the header of the message associated with this alias. On agents which support this MIB but do not support VLANs, the value for this object MUST be (1)." ::= { ctAliasEntry 5 } ctAliasProtocol OBJECT-TYPE SYNTAX CabletronProtocolTC MAX-ACCESS read-only STATUS current DESCRIPTION "The address type of this alias address." ::= { ctAliasEntry 6 } ctAliasAddress OBJECT-TYPE SYNTAX AliasAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The address associated with this entry. The exact format of this object will depend upon the protocol type in ctAliasProtocol. The value returned for this object MUST be in a non-textual format." ::= { ctAliasEntry 7 } ctAliasIsActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry. A true(1) value indicates the alias is active. A false(2) value indicates an entry which has been marked inactive by network management, using the ctAliasEntryStatus object in the ctAliasControlTable. Entries which have been marked inactive may remain in the table to allow consistent mappings between network management stations until an agent needs to free resources." ::= { ctAliasEntry 8 } ctAliasAddressText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The address associated with this entry in a human readable textual format." ::= { ctAliasEntry 9 } -- Alias Control Table ctAliasControlTable OBJECT-TYPE SYNTAX SEQUENCE OF CtAliasControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows for control of Alias entries. Currently control is limited to marking entries as marked for deletion. If the entry in the Alias Control table identified by ctAliasID is marked inactive by management request, and subsequently deleted to free resources, all corresponding entries in the ctAlias table are also deleted. All entries in this table are deleted when sysUpTime is reset to zero." ::= { ctAlias 2 } ctAliasControlEntry OBJECT-TYPE SYNTAX CtAliasControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains a unique identifier of an Alias entry and a control object to mark the entry as 'marked for deletion'." INDEX { ctAliasID } ::= { ctAliasControlTable 1 } CtAliasControlEntry ::= SEQUENCE { ctAliasID Integer32, ctAliasMarkInactive TruthValue, ctAliasEntryStatus INTEGER } ctAliasID OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "A unique and arbitrary integer ID assigned by the agent to identify this entry. Each identifier must not be reused until the agent is re-initialized, i.e. sysUpTime is reset to zero." ::= { ctAliasControlEntry 1 } ctAliasMarkInactive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS deprecated DESCRIPTION "This object provides the control to mark this entry to inactive. When an entry is created by the agent, this is set to false(2). A network management application can set this value to true(1), indicating that the entry is no longer needed. Once this object has been set to true(1), it cannot be set to false(2). If the alias is detected again by the agent, the agent may create a new entry for the Alias. When an agent needs to free up resources, it may choose to delete those entries marked inactive." ::= { ctAliasControlEntry 2 } ctAliasEntryStatus OBJECT-TYPE SYNTAX INTEGER { active(1), inactive(2), remove(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object provides the control to remove or inactivate entries that are no longer needed. active(1) - indicates that this entry is active. inactive(2) - indicates that this entry is no longer of any interest and can be removed, as needed, by the entity. If the alias is marked inactive and is seen again by the agent, the alias ID's status will be changed to active. remove(3) - indicates that the agent SHOULD immediately remove the entry from the table. If the alias is seen again by the agent after having been removed, it will be added as a new aliasID." ::= { ctAliasControlEntry 3 } -- Alias Table Statistics ctAliasStats OBJECT IDENTIFIER ::= { ctAlias 3 } ctAliasTableStatsTotalEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of entries in the ctAliasControlTable." ::= { ctAliasStats 1 } ctAliasTableStatsActiveEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of active entries in the ctAliasControlTable." ::= { ctAliasStats 2 } ctAliasTableStatsPurgeTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "System time of the most recent purge." ::= { ctAliasStats 3 } ctAliasTableStatsState OBJECT-TYPE SYNTAX INTEGER { notStarted(1), ready(2), full(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Current Alias Table state. notStarted(1) indicates the agent has not completed any required start up routines and therefore the ctAliasTable and ctAliasControlTable are not currently valid. ready(2) indicates that the agent has completed all initialization procedures and that the alias MIB is running properly. full(3) indicates that due to memory restrictions on the agent, the ctaliasTable has reached the maximum number of entries possible. NOTE: If an agent is using a circular queue design, then the state of full(3) will never be set." ::= { ctAliasStats 4 } -- Alias Configuration ctAliasConfiguration OBJECT IDENTIFIER ::= { ctAlias 4 } ctAliasConfigurationSystemAllocatedEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of alias entries allocated." ::= { ctAliasConfiguration 1 } ctAliasConfigurationSystemTotalEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of alias entries available to be allocated for this system." ::= { ctAliasConfiguration 2 } ctAliasConfigurationTable OBJECT-TYPE SYNTAX SEQUENCE OF CtAliasConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table is used to prevent any single chatty port from monopolizing all of the available alias buffers in the system by letting an administrator tune each port." ::= { ctAliasConfiguration 3 } ctAliasConfigurationEntry OBJECT-TYPE SYNTAX CtAliasConfigurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains an enable/disable control variable and variables showing the number of maximum allowable and currently used entries." INDEX { ctAliasInterface } ::= { ctAliasConfigurationTable 1 } CtAliasConfigurationEntry ::= SEQUENCE { ctAliasConfigurationInterfaceTotalEntries Gauge32, ctAliasConfigurationInterfaceMaxEntries Gauge32, ctAliasConfigurationInterfaceEnableState EnabledStatus, ctAliasConfigurationNumQueueWraps Counter32 } ctAliasConfigurationInterfaceTotalEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of alias entries currently in use by this ctAliasInterface." ::= { ctAliasConfigurationEntry 1 } ctAliasConfigurationInterfaceMaxEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-write STATUS current DESCRIPTION "This object represents the maximum number of alias entries in the ctAliasTable which were created by this ctAliasInterface. When the object ctAliasConfigurationInterfaceTotalEntries equals this object, the next alias appearing on this ctAliasInterface causes the oldest entry created by this ctAliasInterface to be deleted. The sum of this object across all ctAliasInterface shall not exceed ctAliasConfigurationSystemTotalEntries. If the value of this object is increased, then oldest entry removal ceases until the maximum is reached again. If management reduces the value of this object, then, starting with the oldest, alias entries are removed until the new number of entries is reached." ::= { ctAliasConfigurationEntry 2 } ctAliasConfigurationInterfaceEnableState OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The enable state of the alias agent on this ctAliasInterface." DEFVAL { enabled } ::= { ctAliasConfigurationEntry 3 } ctAliasConfigurationNumQueueWraps OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object represents the number of times the queue for this ctAliasConfigurationEntry has wrapped. Since circular queues are used for storing the entries, when all allocated entries are used, the oldest entries are reused, thus creating a wrap condition. A value of zero indicates the queue has not wrapped, except in the case that the counter itself has wrapped." ::= { ctAliasConfigurationEntry 4 } -- Alias Mac Address Table ctAliasMacAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF CtAliasMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ctAliasMacAddressTable contains information about the aliases known by the agent indexed by MAC address and protocol. This table contains information that is identical to the ctAliasTable, but it is instanced by MAC address and protocol to allow management entities to search for a MAC address and protocol, or part of a MAC address and protocol, using a single SNMP GetNext request." ::= { ctAlias 5 } ctAliasMacAddressEntry OBJECT-TYPE SYNTAX CtAliasMacAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information pertaining to the alias of a node in a table indexed by MAC address, protocol type, protocol address, and alias ID." INDEX { ctAliasMacAddress, ctAliasProtocol, ctAliasAddress, ctAliasReference } ::= { ctAliasMacAddressTable 1 } CtAliasMacAddressEntry ::= SEQUENCE { ctAliasMacAddressInterface InterfaceIndex, ctAliasMacAddressVlanID VlanIndex, ctAliasMacAddressIsActive TruthValue, ctAliasMacAddressAddressText SnmpAdminString, ctAliasMacAddressTime TimeTicks } ctAliasMacAddressInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the interface on which this entry was discovered. The ifIndex is an 'external value' that identifies a physical component associated with the Alias entry. This object can be used to identify the physical location of the interface in the ifTable [RFC2863]. The possibility of ifIndex value re-assignment must be accommodated by a management application whenever the value of sysUpTime is reset to zero. Since ifIndex values in different 'naming scopes' are not related to one another, the interface to physical component associations are relative to the same logical entity within the agent. For more discussion of naming scopes, see the ENTITY-MIB [RFC2037]" ::= { ctAliasMacAddressEntry 1 } ctAliasMacAddressVlanID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID contained in the header of the message associated with this alias. On agents which support this MIB but do not support VLANs, the value for this object MUST be (1)." ::= { ctAliasMacAddressEntry 2 } ctAliasMacAddressIsActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry. A true(1) value indicates the alias is active. A false(2) value indicates an entry which has been marked inactive by network management, using the ctAliasEntryStatus object in the ctAliasControlTable. Entries which have been marked inactive may remain in the table to allow consistent mappings between network management stations until an agent needs to free resources." ::= { ctAliasMacAddressEntry 3 } ctAliasMacAddressAddressText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The address associated with this entry in a human readable textual format." ::= { ctAliasMacAddressEntry 4 } ctAliasMacAddressTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this entry was last modified." ::= { ctAliasMacAddressEntry 5 } -- Alias Protocol Address Table ctAliasProtocolAddressTable OBJECT-TYPE SYNTAX SEQUENCE OF CtAliasProtocolAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ctAliasProtocolAddressTable contains information about the aliases known by the agent indexed by protocol and address. This table contains information that is identical to the ctAliasTable, but it is instanced by protocol and address to allow management entities to search for a protocol and address, or part of a protocol and address, using a single SNMP GetNext request." ::= { ctAlias 6 } ctAliasProtocolAddressEntry OBJECT-TYPE SYNTAX CtAliasProtocolAddressEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each entry contains information pertaining to the alias of a node in a table indexed by protocol type, protocol address, MAC address, and alias ID." INDEX { ctAliasProtocol, ctAliasAddress, ctAliasMacAddress, ctAliasReference } ::= { ctAliasProtocolAddressTable 1 } CtAliasProtocolAddressEntry ::= SEQUENCE { ctAliasProtocolAddressInterface InterfaceIndex, ctAliasProtocolAddressVlanID VlanIndex, ctAliasProtocolAddressIsActive TruthValue, ctAliasProtocolAddressAddressText SnmpAdminString, ctAliasProtocolAddressTime TimeTicks } ctAliasProtocolAddressInterface OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the interface on which this entry was discovered. The ifIndex is an 'external value' that identifies a physical component associated with the Alias entry. This object can be used to identify the physical location of the interface in the ifTable [RFC2863]. The possibility of ifIndex value re-assignment must be accommodated by a management application whenever the value of sysUpTime is reset to zero. Since ifIndex values in different 'naming scopes' are not related to one another, the interface to physical component associations are relative to the same logical entity within the agent. For more discussion of naming scopes, see the ENTITY-MIB [RFC2037]" ::= { ctAliasProtocolAddressEntry 1 } ctAliasProtocolAddressVlanID OBJECT-TYPE SYNTAX VlanIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The VLAN ID contained in the header of the message associated with this alias. On agents which support this MIB but do not support VLANs, the value for this object MUST be (1)." ::= { ctAliasProtocolAddressEntry 2 } ctAliasProtocolAddressIsActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this entry. A true(1) value indicates the alias is active. A false(2) value indicates an entry which has been marked inactive by network management, using the ctAliasEntryStatus object in the ctAliasControlTable. Entries which have been marked inactive may remain in the table to allow consistent mappings between network management stations until an agent needs to free resources." ::= { ctAliasProtocolAddressEntry 3 } ctAliasProtocolAddressAddressText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The address associated with this entry in a human readable textual format." ::= { ctAliasProtocolAddressEntry 4 } ctAliasProtocolAddressTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this entry was last modified." ::= { ctAliasProtocolAddressEntry 5 } -- Alias Table Clear object ctAliasEntryClearAll OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "This object is used to remove all of the alias entries from all of the tables. When set to true(1) all known aliases will be immediately removed from all of their respective tables. A read will always return false(2)." ::= { ctAlias 7 } -- ------------------------------------------------------------- -- Conformance Information -- ------------------------------------------------------------- ctAliasConformance OBJECT IDENTIFIER ::= { ctAliasMib 2 } ctAliasGroups OBJECT IDENTIFIER ::= { ctAliasConformance 1 } ctAliasCompliances OBJECT IDENTIFIER ::= { ctAliasConformance 2 } -- ------------------------------------------------------------- -- units of conformance -- ------------------------------------------------------------- ctAliasBasicGroup OBJECT-GROUP OBJECTS { ctAliasInterface, ctAliasMacAddress, ctAliasVlanID, ctAliasProtocol, ctAliasAddress, ctAliasIsActive, ctAliasAddressText } STATUS current DESCRIPTION "A collection of objects for the discovery and mapping of end systems and aliases." ::= { ctAliasGroups 1 } ctAliasStatsGroup OBJECT-GROUP OBJECTS { ctAliasTableStatsTotalEntries, ctAliasTableStatsActiveEntries, ctAliasTableStatsPurgeTime, ctAliasTableStatsState } STATUS current DESCRIPTION "A collection of objects pertaining to discovery and mapping of end systems and aliases." ::= { ctAliasGroups 2 } ctAliasControlGroup OBJECT-GROUP OBJECTS { ctAliasMarkInactive } STATUS deprecated DESCRIPTION "This group has been deprecated. See ctAliasControlGroupI." ::= { ctAliasGroups 3 } ctAliasConfigurationGroup OBJECT-GROUP OBJECTS { ctAliasConfigurationSystemAllocatedEntries, ctAliasConfigurationSystemTotalEntries, ctAliasConfigurationInterfaceTotalEntries, ctAliasConfigurationInterfaceMaxEntries, ctAliasConfigurationInterfaceEnableState } STATUS current DESCRIPTION "A collection of objects for configuring port buffer queues." ::= { ctAliasGroups 4 } ctAliasMacAddressGroup OBJECT-GROUP OBJECTS { ctAliasMacAddressInterface, ctAliasMacAddressVlanID, ctAliasMacAddressIsActive, ctAliasMacAddressAddressText, ctAliasMacAddressTime } STATUS current DESCRIPTION "A collection of objects for the discovery and mapping of end systems and aliases." ::= { ctAliasGroups 5 } ctAliasProtocolAddressGroup OBJECT-GROUP OBJECTS { ctAliasProtocolAddressInterface, ctAliasProtocolAddressVlanID, ctAliasProtocolAddressIsActive, ctAliasProtocolAddressAddressText, ctAliasProtocolAddressTime } STATUS current DESCRIPTION "A collection of objects for the discovery and mapping of end systems and aliases." ::= { ctAliasGroups 6 } ctAliasControlGroupI OBJECT-GROUP OBJECTS { ctAliasEntryStatus } STATUS current DESCRIPTION "A collection of objects which make the Aliases accessible using the TimeFilter TEXTUAL CONVENTION." ::= { ctAliasGroups 7 } ctAliasGroup OBJECT-GROUP OBJECTS { ctAliasEntryClearAll } STATUS current DESCRIPTION "An object used for removing alias entries." ::= { ctAliasGroups 8 } ctAliasConfigurationGroupI OBJECT-GROUP OBJECTS { ctAliasConfigurationNumQueueWraps } STATUS current DESCRIPTION "An object to indicate queue usage." ::= { ctAliasGroups 9 } -- ------------------------------------------------------------- -- compliance statements -- ------------------------------------------------------------- ctAliasCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for device support of the Cabletron Directory Alias feature." MODULE MANDATORY-GROUPS { ctAliasBasicGroup, ctAliasStatsGroup, ctAliasGroup } -- an implementation which does not support the ctAliasControlGroup -- will not allow for NMS management controlled garbage collection. ::= { ctAliasCompliances 1 } END