CTFRAMER-CONFIG-MIB DEFINITIONS ::= BEGIN -- Ctron Framer Config MIB -- Revision: 01.00.01 -- Date: April 18, 1999 -- Part Number: -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for part -- of the naming tree below: -- -- cabletron { enterprises 52 } -- -- This module will be extended, as additional sub-sections -- of this naming tree are defined. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright August 96 Cabletron Systems IMPORTS -- In the orignal text at ctron:/user/ctron/mibs/enterprise/release/ctframer-mib.txt -- ctFramerConfig was imported from CTRON-MIB-NAMES. But in this document -- ctFramerConfig is imported from CTIF-EXT-MIB since this MIB is part -- of the default database loaded by the Spectrum Browser and also contains -- defintion for ctFramerConfig. ctFramerConfig, ctIfPortPortNumber FROM CTIF-EXT-MIB ifIndex FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- --======================================================================= -- ctFramerConfig Groups ctFramerBaseConfig OBJECT IDENTIFIER ::= { ctFramerConfig 1 } ctFramerSonetConfig OBJECT IDENTIFIER ::= { ctFramerConfig 2 } ctFramerDS3Config OBJECT IDENTIFIER ::= { ctFramerConfig 3 } -- --===================================================================== -- This table allows a user to configure the chip on the physical -- medium. This chip is responsible for framing the bits in the correct -- manner for the wire. ctFramerConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF CtFramerConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of framer configuration objects for a physical port on a particular interface." ::= { ctFramerBaseConfig 1 } ctFramerConfigEntry OBJECT-TYPE SYNTAX CtFramerConfigEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry containing objects pertaining to the configuration of the framer on a physical port on an interface." INDEX { ifIndex, ctIfPortPortNumber } ::= { ctFramerConfigTable 1 } CtFramerConfigEntry ::= SEQUENCE { ctFramerStatsConfig INTEGER, ctFramerAlarmsConfig INTEGER, ctFramerMediumConfig INTEGER, ctFramerIdleCellsConfig INTEGER, ctFramerCellPayScramConfig INTEGER } ctFramerStatsConfig OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "Setting this object to 'on' will activate the framer MIBs as specified by either RFC-1595 or RFC-1407 depending on whether the interface uses SONET/SDH framing or DS3 framing respectively. Note: Setting this to 'on' will permit gathering of framer statistics at the expense of processing time. However, it might be a valuable debugging aid to turn on the framer MIB. Setting this object to 'off' will deactivate the respective framer MIBs, thus saving processing time. It is emphasized that collection of statistics for the framer is resource (processor, memory) intensive. This object is persistent." DEFVAL { off } ::= { ctFramerConfigEntry 1 } ctFramerAlarmsConfig OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object activates/deactivates the detection and initiation of framer alarms. for SONET/SDH framed physical ports: RDI - remote defect indicator AIS - alarm indication signal for DS3 framed physical ports: yellow signal alarms This object is persistent." DEFVAL { off } ::= { ctFramerConfigEntry 2 } ctFramerMediumConfig OBJECT-TYPE SYNTAX INTEGER { sonet(1), sdh(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object controls whether a SONET or a SDH signal is used across this physical port. sonet - synchronous optical network sdh - synchronous digital heirarchy This object is persistent." DEFVAL { sonet } ::= { ctFramerConfigEntry 3 } ctFramerIdleCellsConfig OBJECT-TYPE SYNTAX INTEGER { idle(1), unassigned(2) } ACCESS read-write STATUS mandatory DESCRIPTION "When this object is set to idle, null cells will have the CLP bit set. When this object is set to unassigned, null cells will not have the CLP bit set. This object is persistent." ::= { ctFramerConfigEntry 4 } ctFramerCellPayScramConfig OBJECT-TYPE SYNTAX INTEGER { on(1), off(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This object activates/deactivates cell payload transmit scrambling and receive descrambling. This object is persistent." ::= { ctFramerConfigEntry 5 } END