CTELS100-NG-MIB DEFINITIONS ::= BEGIN -- ctels100-ng-mib.txt -- Revision: 01.03.00 -- Part Number: -- Date: December 15, 1999 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for part of the -- naming tree below: -- -- cabletron { enterprises 52 } -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- -- Copyright (c)1999 Cabletron Systems -- -- This mib is part of the assigned enterprise MIB tree for Cabletron Systems. -- This mib provides management information for the next generation of the -- ELS100 product line (specifically: ELS100-24TX, ELS100-24TXM, and -- ELS100-24TXG), part of the SmartSTACK product line. IMPORTS Counter, mgmt, NetworkAddress, enterprises FROM RFC1155-SMI DisplayString FROM RFC1213-MIB OBJECT-TYPE FROM RFC-1212; -- TRAP-TYPE -- FROM RFC-1215; -- All representations of MAC addresses in this MIB Module -- use, as a textual convention (i.e. this convention does -- not affect their encoding), the data type: -- DisplayString ::= OCTET STRING mib-2 OBJECT IDENTIFIER ::= { mgmt 1 } cabletron OBJECT IDENTIFIER ::= { enterprises 52 } els100 OBJECT IDENTIFIER ::= { cabletron 1011 } els100SystemConfig OBJECT IDENTIFIER ::= { els100 1 } -- els100PortTable OBJECT IDENTIFIER ::= { els100 2 } els100Switch OBJECT IDENTIFIER ::= { els100 3 } -- System-level configuration information els100SysSerialno OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-only STATUS mandatory DESCRIPTION "The serial number of the system." ::= { els100SystemConfig 1 } els100SysTftpIPAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the TFTP server from which a software download is to be initiated. This variable must be set before a TFTP download can be started with the els100SysTftpStartDownload variable." ::= { els100SystemConfig 2 } els100SysTftpFilename OBJECT-TYPE SYNTAX DisplayString (SIZE (0..255)) ACCESS read-write STATUS mandatory DESCRIPTION "The name of the software upgrade file residing on the TFTP server. Path information must be included in the file name. This variable must be set before a TFTP download can be started with the els100SysTftpStartDownload variable." ::= { els100SystemConfig 3 } els100SysPowerupCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The total number of times the system has powered up since it was shipped from the factory." ::= { els100SystemConfig 4 } els100SysBrcastCutoffRate OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The Broadcast Cutoff Rate of the switch allowing for the control of broadcast storms. The value of this variable sets a per second rate. If the broadcast and unknown destination address frames being forwarded through the system surpass this rate, they are dropped. Valid values for this parameter are in the range (100..500000)." ::= { els100SystemConfig 5 } els100SysGatewayIPAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the next hop router (gateway) to which frames destined for an IP subnet different than what the system resides are sent." ::= { els100SystemConfig 6 } els100SysTftpStartDownload OBJECT-TYPE SYNTAX INTEGER{ download (1), noDownload (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Start a TFTP download. A SET of this variable with the value download (1) initiates a TFTP download to upgrade the system software. The variables els100SysTftpIPAddress and els100SysTftpFilename must be configured before a download can begin. A GET of this variable will always return the value noDownload (2)." ::= { els100SystemConfig 7 } els100SysBootPDhcpEnable OBJECT-TYPE SYNTAX INTEGER{ disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the operation of the BootP and DHCP protocols on the system. These protocols are used for automatically configuring the system's IP address information if a properly configured BootP and/or DHCP server exists on the network." ::= { els100SystemConfig 8 } -- els100SysRmonStatsHistEnable OBJECT-TYPE -- SYNTAX INTEGER{ -- disable (1), -- enable (2) -- } -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "Globally enable/disable the operation of the RMON -- Statistics and History Groups on all ports simultaneously." -- ::= { els100SystemConfig 9 } els100SysReset OBJECT-TYPE SYNTAX INTEGER{ noReset (1), reset (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Initiate a software reset of the system." ::= { els100SystemConfig 10 } els100SysSyslogServer OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the Syslog Server." ::= { els100SystemConfig 11 } els100SysLowestSyslogSeverity OBJECT-TYPE SYNTAX INTEGER{ emergency (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), debug (7) } ACCESS read-write STATUS mandatory DESCRIPTION "The Lowest Syslog Severity Level. All logs with the same or higher severity will be delivered. Note: higher severity has lower number." ::= { els100SystemConfig 12 } els100SysComPortEnable OBJECT-TYPE SYNTAX INTEGER { disabled(1), enabled(2) -- default } ACCESS read-write STATUS mandatory DESCRIPTION "The administrative state of the Com Port." ::= { els100SystemConfig 13 } els100SysBoardID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The system board ID." ::= { els100SystemConfig 14 } -- The port table - indexed by port els100PortTable OBJECT-TYPE SYNTAX SEQUENCE OF Els100PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The port table." ::= { els100 2 } els100PortEntry OBJECT-TYPE SYNTAX Els100PortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the port table." INDEX { els100Port } ::= { els100PortTable 1 } Els100PortEntry ::= SEQUENCE { els100Port INTEGER, els100PortStatus INTEGER, els100PortDuplexStatus INTEGER, els100PortForwardedFrames Counter, els100PortRcvdLocalFrames Counter, els100PortName DisplayString, els100PortEnable INTEGER, els100PortSpeed INTEGER, els100PortAutonegEnable INTEGER, els100PortFlowControlEnable INTEGER, els100PortType INTEGER } els100Port OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of the port, from 1 to the number of ports on the system." ::= { els100PortEntry 1 } els100PortStatus OBJECT-TYPE SYNTAX INTEGER{ up (1), down (2) } ACCESS read-only STATUS mandatory DESCRIPTION "The connection (link) status of the port, either up (linked) or down (not linked)." ::= { els100PortEntry 2 } els100PortDuplexStatus OBJECT-TYPE SYNTAX INTEGER{ half (1), full (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The duplex status of the port, either half duplex or full duplex." ::= { els100PortEntry 3 } els100PortForwardedFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames received on the port and forwarded to another port on the system module for processing." ::= { els100PortEntry 4 } els100PortRcvdLocalFrames OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of frames received where the destination is on the port." ::= { els100PortEntry 5 } els100PortName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "A descriptive string of up to 60 characters used by the network administrator to name the port." ::= { els100PortEntry 6 } els100PortEnable OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The enable status of the port, either enable or disable." ::= { els100PortEntry 7 } els100PortSpeed OBJECT-TYPE SYNTAX INTEGER { tenMbps (1), oneHundredMbps(2), oneThousandMbps(3) } ACCESS read-write STATUS mandatory DESCRIPTION "The speed the port is operating at: 10Mbps, or 100Mbps, or 1000Mbps." ::= { els100PortEntry 8 } els100PortAutonegEnable OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The auto-negotiation status of the port, either enable or disable. When in the enable (2) state, the port will automatically configure its duplex and speed operation." ::= { els100PortEntry 9 } els100PortFlowControlEnable OBJECT-TYPE SYNTAX INTEGER { disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The state of flow control operation of the port, either enable or disable." ::= { els100PortEntry 10 } els100PortType OBJECT-TYPE SYNTAX INTEGER { unknown(1), ieee10BaseT(2), ieee100BaseTx(3), ieee100BaseFx-MM(4), ieee100BaseFx-SM(5), ieee1000BaseCx(6), ieee1000BaseLx(7), ieee1000BaseSx(8), ieee1000BaseT(9), ieee1000BaseX(10) } ACCESS read-only STATUS mandatory DESCRIPTION "Port physical interface type." ::= { els100PortEntry 11 } -- Switch-level information and configuration els100SwitchIPAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the system." ::= { els100Switch 1 } els100SwitchSubnetMask OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The subnet mask associated with the IP address of the system." ::= { els100Switch 2 } els100ActiveAgingTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The aging time of entries in the MAC address forwarding table of the system." ::= { els100Switch 3 } -- els100PurgeAgingTime OBJECT-TYPE -- SYNTAX INTEGER -- ACCESS read-write -- STATUS mandatory -- DESCRIPTION -- "The purge aging time of entries in the MAC address forwarding -- table of the system." -- ::= { els100Switch 4 } els100SwitchSTPStatus OBJECT-TYPE SYNTAX INTEGER{ on (1), off (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The Spanning Tree status of the system, enter on or off." ::= { els100Switch 5 } els100SwitchManager OBJECT IDENTIFIER ::= { els100Switch 6 } els100SwitchTrapRcvr1 OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the first SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 1 } els100SwitchTrapCommunity1 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "The community name of the first SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 2 } els100SwitchTrapRcvr2 OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the second SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 3 } els100SwitchTrapCommunity2 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "The community name of the second SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 4 } els100SwitchTrapRcvr3 OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the third SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 5 } els100SwitchTrapCommunity3 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "The community name of the third SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 6 } els100SwitchTrapRcvr4 OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "The IP address of the fourth SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 7 } els100SwitchTrapCommunity4 OBJECT-TYPE SYNTAX DisplayString (SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "The community name of the fourth SNMP manager to which traps from the system are directed." ::= { els100SwitchManager 8 } els100SwitchPortMirroringStatus OBJECT-TYPE SYNTAX INTEGER{ disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "The Port Mirroring status of the system, either disable or enable." ::= { els100Switch 7 } els100SwitchMirroredPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port that is being mirrored - the source." ::= { els100Switch 8 } els100SwitchMirroringPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port that is mirroring - the destination." ::= { els100Switch 9 } els100SwitchXmitMirrorEnable OBJECT-TYPE SYNTAX INTEGER{ disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the mirroring of transmitted traffic out the mirrored port to the mirroring port." ::= { els100Switch 10 } els100SwitchRcvMirrorEnable OBJECT-TYPE SYNTAX INTEGER{ disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Enable or disable the mirroring of received traffic into the mirrored port to the mirroring port." ::= { els100Switch 11 } els100SwitchVlanEnable OBJECT-TYPE SYNTAX INTEGER{ disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Globally enable or disable the VLAN operation of the system." ::= { els100Switch 12 } -- Switch Info Vlan table - indexed by VLAN els100SwitchVlanConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF Els100SwitchVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The VLAN configuration table." ::= { els100Switch 13 } els100SwitchVlanEntry OBJECT-TYPE SYNTAX Els100SwitchVlanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the VLAN configuration table." INDEX { els100SwitchVlanId } ::= { els100SwitchVlanConfigTable 1 } Els100SwitchVlanEntry ::= SEQUENCE { els100SwitchVlanId INTEGER, els100SwitchVlanName DisplayString, els100SwitchVlanPorts OCTET STRING, els100SwitchVlanEgressPorts OCTET STRING, els100SwitchVlanStatus INTEGER } els100SwitchVlanId OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The number of the VLAN, from 1 to the number of VLAN's supported on the system." ::= { els100SwitchVlanEntry 1 } els100SwitchVlanName OBJECT-TYPE SYNTAX DisplayString (SIZE(0..60)) ACCESS read-write STATUS mandatory DESCRIPTION "A descriptive string of up to 60 characters used by the network administrator to name the VLAN." ::= { els100SwitchVlanEntry 2 } els100SwitchVlanPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports in the VLAN. For systems supporting tagged VLAN's, these are the ports to which packets on the VLAN are sent untagged. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus each port of the system is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the VLAN; the port is not included if its bit has a value of '0'." ::= { els100SwitchVlanEntry 3 } els100SwitchVlanEgressPorts OBJECT-TYPE SYNTAX OCTET STRING ACCESS read-write STATUS mandatory DESCRIPTION "The set of ports defined to be on other VLAN's to which tagged packets destined for this specific VLAN should also be sent. Thus, this variable defines ports on the system that reach stations downstream which are on this VLAN and to which traffic may be forwarded. Each octet within the value of this object specifies a set of eight ports, with the first octet specifying ports 1 through 8, the second octet specifying ports 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered port, and the least significant bit represents the highest numbered port. Thus each port of the system is represented by a single bit within the value of this object. If that bit has a value of '1' then that port is included in the VLAN; the port is not included if its bit has a value of '0'." ::= { els100SwitchVlanEntry 4 } els100SwitchVlanStatus OBJECT-TYPE SYNTAX INTEGER{ enable (1), disable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Control variable used to enable or disable the operation of the associated VLAN in the system." ::= { els100SwitchVlanEntry 5 } els100SwitchVlanPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Els100SwitchVlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The VLAN port configuration table." ::= { els100Switch 14 } els100SwitchVlanPortEntry OBJECT-TYPE SYNTAX Els100SwitchVlanPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the VLAN port configuration table." INDEX { els100SwitchVlanPortId } ::= { els100SwitchVlanPortTable 1 } Els100SwitchVlanPortEntry ::= SEQUENCE { els100SwitchVlanPortId INTEGER, els100SwitchVlanPvid INTEGER, els100SwitchVlanPortType INTEGER } els100SwitchVlanPortId OBJECT-TYPE SYNTAX INTEGER (0..63) ACCESS read-only STATUS mandatory DESCRIPTION "The number of the port, from 1 to number of ports in the system." ::= { els100SwitchVlanPortEntry 1 } els100SwitchVlanPvid OBJECT-TYPE SYNTAX INTEGER (1..4095) ACCESS read-write STATUS mandatory DESCRIPTION "The port's VLAN ID. For tagged VLAN's, this variable defines a 12 bit port VLAN ID (PVID) used as the identifier of the VLAN in the packet tag." ::= { els100SwitchVlanPortEntry 2 } els100SwitchVlanPortType OBJECT-TYPE SYNTAX INTEGER{ hybrid (1), access (2) } ACCESS read-write STATUS mandatory DESCRIPTION "For tagged VLAN's, the VLAN port type, either hybrid or access. Hybrid ports allow both tagged and untagged packets to enter the switch. Access ports only accept untagged packets." ::= { els100SwitchVlanPortEntry 3 } els100SwitchPriorityEnable OBJECT-TYPE SYNTAX INTEGER{ disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Globally enable or disable the Class of Service traffic priority mechanism for the system." ::= { els100Switch 15 } els100SwitchPriorityThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The global priority threshold level for the system at which VLAN tagged frames entering the associated port are assigned a high priority. This variable can have a value from (0...7). Traffic with a priority level equal to or above this value are high priority. Traffic with a priority level below this value are normal priority." ::= { els100Switch 16 } els100SwitchPriorityPortTable OBJECT-TYPE SYNTAX SEQUENCE OF Els100SwitchPriorityPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "The priority port table." ::= { els100Switch 17 } els100SwitchPriorityPortEntry OBJECT-TYPE SYNTAX Els100SwitchPriorityPortEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "An entry in the port priority table." INDEX { els100SwitchPriorityPortId } ::= { els100SwitchPriorityPortTable 1 } Els100SwitchPriorityPortEntry ::= SEQUENCE { els100SwitchPriorityPortId INTEGER, els100SwitchPriorityDefault INTEGER } els100SwitchPriorityPortId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The port number, from 1 to number of ports in the system." ::= { els100SwitchPriorityPortEntry 1 } els100SwitchPriorityDefault OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port priority level assigned to untagged traffic entering the associated port. This variable can have a value in the range (0...7). This value is compared to the value of the els100SwitchPriorityThreshold variable to determine if the traffic on the port is high or normal." ::= { els100SwitchPriorityPortEntry 2 } els100SwitchSpanningTreeStandby OBJECT-TYPE SYNTAX INTEGER{ disable (1), enable (2) } ACCESS read-write STATUS mandatory DESCRIPTION "Globally enable or disable Spanning Tree Standby. If set to disable, every port will instanly enter forwarding mode after link up" ::= { els100Switch 18 } END