CT-PRIORITY-QUEUING DEFINITIONS ::= BEGIN

-- ct-priority-queuing-mib.txt
-- Revision: 00.00.02
-- Part Number:
-- Date: "200309231809Z"  - Tue Sep 23 18:09 GMT 2003

-- Cabletron Systems, Inc.
-- 35 Industrial Way, P.O. Box 5005
-- Rochester, NH 03867-5005
-- (603) 332-9400
-- support@ctron.com

-- This module provides definitions for the 802.1p
-- priority queuing MIB.
-- All managed objects are defined in 802.1p DRAFT D15

-- This module will be extended, as required.
--

-- Cabletron Systems reserves the right to make changes in
-- specification and other information contained in this document
-- without prior notice.  The reader should consult Cabletron Systems
-- to determine whether any such changes have been made.
--
-- In no event shall Cabletron Systems be liable for any incidental,
-- indirect, special, or consequential damages whatsoever (including
-- but not limited to lost profits) arising out of or related to this
-- document or the information contained in it, even if Cabletron
-- Systems has been advised of, known, or should have known, the
-- possibility of such damages.
--
-- Cabletron grants vendors, end-users, and other interested parties
-- a non-exclusive license to use this Specification in connection
-- with the management of Cabletron products.

-- Copyright February 1999 Cabletron Systems

-- 02-24-98 RJH changed "numOfTrafficClasses" to read-only from read-write
-- 09-23-03 GBP changed the status of all objects to obsolete

IMPORTS

      OBJECT-TYPE
                FROM RFC-1212
     enterprises
                FROM RFC1155-SMI;


cabletron                   OBJECT IDENTIFIER ::= { enterprises 52 }
mibs                        OBJECT IDENTIFIER ::= { cabletron 4 }
ctronExp                    OBJECT IDENTIFIER ::= { mibs 2 }
ctVLANMib                   OBJECT IDENTIFIER ::= { ctronExp 12 }
ctVLANMgr                   OBJECT IDENTIFIER ::= { ctVLANMib 1 }
ctPriority                  OBJECT IDENTIFIER ::= { ctVLANMgr 4 }
ctBasePriority           OBJECT IDENTIFIER ::= { ctPriority 2 } 
ctUserDefPriority        OBJECT IDENTIFIER ::= { ctBasePriority 1 }
ctRegenPriority          OBJECT IDENTIFIER ::= { ctBasePriority 2 } 
ctTrafPriority           OBJECT IDENTIFIER ::= { ctBasePriority 3 }

--
-- The dot1qUserDefPriority group manages priorities of bridged packets. It
-- uses the information found in the packet tag of an 802.1Q formatted
-- packet.

ctUserDefTable OBJECT-TYPE
        SYNTAX  SEQUENCE OF CtUserDefEntry 
        ACCESS  not-accessible
        STATUS  obsolete
        DESCRIPTION
                "A table that contains Default User Priority."
        ::= { ctUserDefPriority 1 }

ctUserDefEntry  OBJECT-TYPE
        SYNTAX  CtUserDefEntry  
        ACCESS  not-accessible
        STATUS  obsolete
        DESCRIPTION
        "A list of default user priority for all ports."

        INDEX   { ctUserDefPriorityIndex }
        ::= { ctUserDefTable 1}

CtUserDefEntry ::=
        SEQUENCE {
                   ctUserDefPriorityIndex        INTEGER,
                   ctUserDefPriorityValue        INTEGER,
                   ctUserDefNumTrafficClass      INTEGER
                  }

ctUserDefPriorityIndex     OBJECT-TYPE
        SYNTAX          INTEGER
        ACCESS        read-only 
        STATUS        obsolete  
      DESCRIPTION
        "Description of a specific instance for the default user
         priority table. The object identifier contains the port number."
        ::= { ctUserDefEntry 1 }

ctUserDefPriorityValue OBJECT-TYPE
        SYNTAX          INTEGER (1..7)
        ACCESS  read-write
        STATUS          obsolete
        DESCRIPTION
        "The current state of the Default User Priority parameter
         for a specific port."
        ::= { ctUserDefEntry 2 }

ctUserDefNumTrafficClass   OBJECT-TYPE
    SYNTAX      INTEGER (1..8)
    ACCESS      read-only
    STATUS      obsolete
    DESCRIPTION
        "The number of Traffic Classes in the range 1 through 8
         that are supported on each port."
    ::= { ctUserDefEntry 3 }


-- The regenerationTable is used to modify the incoming packet
-- priority to a new value.

ctRegenerationTable OBJECT-TYPE
        SYNTAX          SEQUENCE OF CtRegenerationEntry
        ACCESS          not-accessible
        STATUS          obsolete
    DESCRIPTION
        "A table that contains the Regenerated Priority."
      ::= { ctRegenPriority 1 }


ctRegenerationEntry OBJECT-TYPE
    SYNTAX        CtRegenerationEntry   
    ACCESS              not-accessible
    STATUS              obsolete
    DESCRIPTION
        "A list of regenerated priority for each bridge port."
    INDEX   { ctRegenerationIndex, ctRegenerationId }
    ::= { ctRegenerationTable 1 }

CtRegenerationEntry ::= 
        SEQUENCE {
                   ctRegenerationIndex          INTEGER,
                   ctRegenerationId             INTEGER,                
                   ctRegenerationValue          INTEGER         
                 }

ctRegenerationIndex     OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          obsolete
        DESCRIPTION
        "Description of a specific instance of the CtRegeneration
         table.  The object identifier contains port."
    ::= { ctRegenerationEntry 1 }

ctRegenerationId                OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          obsolete
        DESCRIPTION
        "Description of a specific instance of the CtRegeneration
         table.  The object identifier contains the priority that 
         is referenced."
    ::= { ctRegenerationEntry 2 }

ctRegenerationValue OBJECT-TYPE
    SYNTAX      INTEGER (0..7)
    ACCESS      read-write
    STATUS      obsolete
    DESCRIPTION
        "Value of the regenerated priority."
    ::= { ctRegenerationEntry 3 }


-- The TrafficClassTable maps the number of transmit queues available
-- to an appropriate traffic class. If the device does not support all
-- 7 transmit queues, this table is used to map the desired traffic
-- priority with the appropriate transmit queue

ctTrafClassTable        OBJECT-TYPE
    SYNTAX              SEQUENCE OF CtTrafClassEntry 
    ACCESS              not-accessible
    STATUS              obsolete
    DESCRIPTION
        "A table that lists the queue number for each Traffic Classes."
    ::= {  ctTrafPriority 1 }

ctTrafClassEntry                OBJECT-TYPE
    SYNTAX              CtTrafClassEntry 
    ACCESS              not-accessible
    STATUS              obsolete
    DESCRIPTION
        "A list of available queue for each Traffic Classes on each port."
    INDEX  { ctTrafClassIndex, ctTrafClassId }
    ::= { ctTrafClassTable 1 }

CtTrafClassEntry ::=
       SEQUENCE {
                  ctTrafClassIndex        INTEGER,
                  ctTrafClassId           INTEGER,
                  ctTrafClassValue        INTEGER

                }
ctTrafClassIndex                OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          obsolete
        DESCRIPTION
        "Description of a specific instance of the Traffic Classes
         table.  The object identifier contains the port number."
        ::= { ctTrafClassEntry 1 }

ctTrafClassId         OBJECT-TYPE
        SYNTAX          INTEGER 
        ACCESS          read-only
        STATUS          obsolete
        DESCRIPTION
        "Description of a specific instance of the Traffic Classes
         table.  The object identifier contains the priority that
         is referenced."
        ::= { ctTrafClassEntry 2 }

ctTrafClassValue                OBJECT-TYPE
    SYNTAX              INTEGER 
    ACCESS              read-write
    STATUS              obsolete
    DESCRIPTION
        "The queue number of Traffic Classes in the range of 0 to the number  
         of Traffic Classes supported on this product."
    ::= { ctTrafClassEntry 3 }

END