CT-FLASH-MIB DEFINITIONS ::= BEGIN -- ct-flash-mib.txt -- Revision: 01.01.02 -- Part Number: -- Date: May 7, 1998 -- Cabletron Systems, Inc. -- 35 Industrial Way, P.O. Box 5005 -- Rochester, NH 03867-0505 -- (603) 332-9400 -- support@ctron.com -- This module provides authoritative definitions for Cabletron's -- flash filing system mib. -- -- This module will be extended, as required. -- -- Cabletron Systems reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Cabletron Systems -- to determine whether any such changes have been made. -- -- In no event shall Cabletron Systems be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Cabletron -- Systems has been advised of, known, or should have known, the -- possibility of such damages. -- -- Cabletron grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Cabletron products. -- Copyright (c)1998 Cabletron Systems IMPORTS NetworkAddress FROM RFC1155-SMI OBJECT-TYPE FROM RFC-1212 DisplayString FROM RFC1213-MIB ctFlash FROM CTRON-MIB-NAMES; --=============== Group Definitions =================== flashStatus OBJECT IDENTIFIER ::= { ctFlash 1 } flashFile OBJECT IDENTIFIER ::= { ctFlash 2 } flashCmd OBJECT IDENTIFIER ::= { ctFlash 3 } -- All groups are optional, within a group all objects are -- mandatory. -- Groups 1 and 2 contain related summary information and -- should be implemented together. --=============== Flash Status group : ctFlash 1 =================== flashVolumeStatusTable OBJECT-TYPE SYNTAX SEQUENCE OF FlashVolumeStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "This table contains status information on each flash volume." ::= { flashStatus 1 } flashVolumeStatusEntry OBJECT-TYPE SYNTAX FlashVolumeStatusEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Information on a particular volume." INDEX { flashVolume } ::= { flashVolumeStatusTable 1 } FlashVolumeStatusEntry ::= SEQUENCE { flashVolume INTEGER, flashVolFiles INTEGER, flashVolSpace INTEGER } flashVolume OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Uniquely defines a volume." ::= { flashVolumeStatusEntry 1 } flashVolFiles OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The flash filing system status contains the number of files currently in the volume." ::= { flashVolumeStatusEntry 2 } flashVolSpace OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object returns the approximate amount of remaining storage space, in bytes, in the flash filing system." ::= { flashVolumeStatusEntry 3 } --=============== Flash File group : ctFlash 2 =================== flashFileTable OBJECT-TYPE SYNTAX SEQUENCE OF FlashFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes each file in a flash file system volume." ::= { flashFile 1 } flashFileEntry OBJECT-TYPE SYNTAX FlashFileEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "Describes a particular file." INDEX { flashVolume, flashFileID } ::= { flashFileTable 1 } FlashFileEntry ::= SEQUENCE { flashFileID INTEGER, flashFilename DisplayString, flashFileVersion DisplayString, flashFileType INTEGER, flashFileSize INTEGER } flashFileID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains a volume-unique file id associated with each file." ::= { flashFileEntry 1 } flashFilename OBJECT-TYPE SYNTAX DisplayString(SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the filename of the current file." ::= { flashFileEntry 2 } flashFileVersion OBJECT-TYPE SYNTAX DisplayString(SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the file version number of the current file in the form 'XX.XX.XX', where 'X' is in the range 0-9." ::= { flashFileEntry 3 } flashFileType OBJECT-TYPE SYNTAX INTEGER { intelHex(1), intelHexCompressed(2), iEEE695(3), eLF(4), table(5), dLL(6), bOOT(7), binary(8), binaryCompressed(9), taggedData(10), package(11) } ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the file type defined for the file." ::= { flashFileEntry 4 } flashFileSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This object contains the size, in bytes, currently allocated to the file." ::= { flashFileEntry 5 } --=============== Flash Command group : ctFlash 3 =================== flashCmdPath OBJECT-TYPE SYNTAX DisplayString (SIZE (0..128)) ACCESS read-write STATUS mandatory DESCRIPTION "Filename requested of the server for a TFTP download or upload." ::= { flashCmd 1 } flashCmdNetAddress OBJECT-TYPE SYNTAX NetworkAddress ACCESS read-write STATUS mandatory DESCRIPTION "IP address of the TFTP server to use with a flash file download or upload operation. If an IP address is not specified, the operation will default to the IP address associated with the runtime TFTP download." ::= { flashCmd 2 } flashCmdVolume OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Flash volume to contain the file created during a download operation." ::= { flashCmd 3 } flashCmdOperation OBJECT-TYPE SYNTAX INTEGER { install(1), download(2), upload(3), cleanup(4), delete(5), none(6) } ACCESS read-write STATUS mandatory DESCRIPTION "Operation to perform on the specified flash file. Download and upload operations require that the network. pathname, filename, version, type, and volume be specified. Cleanup does not require any additional information." ::= { flashCmd 4 } flashCmdStatus OBJECT-TYPE SYNTAX INTEGER { idle(1), other(2), -- none of the following flashVerifyServer(3), flashCleanup(4), -- erasing "dirty" flash downLoadActive(5), upLoadActive(6), completeError(7) } ACCESS read-only STATUS mandatory DESCRIPTION "Status of the download or upload operation. The idle(1) status indicates no operation is in progress. The downLoadActive(3) or upLoadActive(4) indicate a file transfer in progress. The completeError(5) status indicates that a file transfer was started but an error was detected." ::= { flashCmd 5 } flashCmdError OBJECT-TYPE SYNTAX INTEGER { oK(1), -- No error condition deleteFailed(2), -- Flash file deletion failed fileSystem(3), -- Generic file system error tFTPerror(4), -- Generic TFTP session error corruptFile(5), -- File checksum error dupFlashName(6), -- Duplicate flash file name noFlashFile(7), -- Flash file does not exist flashAlloc(8), -- Flash allocation error maxFiles(9), -- Exceeded maximum files per -- flash volume invalidName(10), -- Invalid flash filename protocolErr(11), -- TFTP protocol error serverLost(12), -- Lost TFTP server noNetFile(13), -- Network file not found noNetAccess(14), -- Network access violation netDiskFull(15), -- Network disk full dupNetFile(16), -- Network file already exists parseError(17), -- Install file parse error invalidType(18), -- Invalid file type invalidCmd(19), -- Invalid command invalidModId(20), -- Invalid module id. noServerIP(21), -- No server ip socketError(22), -- UDP socket error blockSequence(23),-- Block sequence error bufferError(24)} -- Buffer error ACCESS read-only STATUS mandatory DESCRIPTION "If the value of flashCmdStatus is completeError(5), then this object describes the nature of the error." ::= { flashCmd 6 } flashCmdFile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-write STATUS mandatory DESCRIPTION "Flash filename to perform the specified operation." ::= { flashCmd 7 } flashCmdVersion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-write STATUS mandatory DESCRIPTION "Flash file version to perform the specified operation in the form 'XX.XX.XX' where 'X' is in the range 0-9." ::= { flashCmd 8 } flashCmdType OBJECT-TYPE SYNTAX INTEGER { intelHex(1), intelHexCompressed(2), iEEE695(3), eLF(4), table(5), dLL(6), bOOT(7), binary(8), binaryCompressed(9), taggedData(10), package(11) } ACCESS read-write STATUS mandatory DESCRIPTION "File type to specify with a flash file created during a download operation." ::= { flashCmd 9 } flashCmdSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Size of the download file. This value allows the flash filing system to initialize an appropriate amount of flash memory prior to the TFTP transfer, preventing a time-out condition during a transfer." ::= { flashCmd 10 } flashBlockCount OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Current TFTP block count of an active session. If no TFTP transfer is in progress, zero is returned." ::= { flashCmd 11} END