CT-FASTPATH-DHCPSERVER-MIB DEFINITIONS ::= BEGIN -- LVL7 FASTPATH DHCP Server MIB -- Copyright LVL7 Systems (2002-2005) All rights reserved. -- This SNMP Management Information Specification -- embodies LVL7 System's confidential and proprietary -- intellectual property. LVL7 Systems retains all title -- and ownership in the Specification including any revisions. -- This Specification is supplied "AS IS", LVL7 Systems -- makes no warranty, either expressed or implied, -- as to the use, operation, condition, or performance of the -- Specification. -- This module provides authoritative definitions for Cabletron's -- CT-FASTPATH-DHCPSERVER-MIB. -- -- This module will be extended, as needed. -- -- Enterasys Networks reserves the right to make changes in -- specification and other information contained in this document -- without prior notice. The reader should consult Enterasys Networks -- to determine whether any such changes have been made. -- -- In no event shall Enterasys Networks be liable for any incidental, -- indirect, special, or consequential damages whatsoever (including -- but not limited to lost profits) arising out of or related to this -- document or the information contained in it, even if Enterasys -- Networks has been advised of, known, or should have known, the -- possibility of such damages. -- -- Enterasys grants vendors, end-users, and other interested parties -- a non-exclusive license to use this Specification in connection -- with the management of Enterasys and Cabletron products. -- -- Copyright January 2006 Enterasys Networks, Inc. IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, IpAddress, Integer32, Unsigned32, TimeTicks, Counter32 FROM SNMPv2-SMI TEXTUAL-CONVENTION, RowStatus, RowPointer, MacAddress, StorageType, TruthValue, DisplayString, PhysAddress FROM SNMPv2-TC -- Place this MIB on CTRON experimental branch. ctDhcpServerExpMib FROM CTRON-MIB-NAMES; ctFastPathDHCPServerMIB MODULE-IDENTITY LAST-UPDATED "200601161932Z" -- Mon Jan 16 19:32 UTC 2006 ORGANIZATION "Enterasys Networks, Inc." CONTACT-INFO "Postal: Enterasys Networks 50 Minuteman Rd. Andover, MA 01810-1008 USA Phone: +1 978 684 1000 E-mail: support@enterasys.com WWW: http://www.enterasys.com" DESCRIPTION "The Enterasys MIB for FASTPATH DHCP Server" ::= { ctDhcpServerExpMib 1 } --************************************************************************************** -- ctAgentDhcpServerGroup -> contains MIB objects displaying various properties of a DHCP server -- --************************************************************************************** ctAgentDhcpServerGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 1 } ctAgentDhcpServerAdminMode OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Admin-mode of the DHCP Server." DEFVAL { disable } ::= { ctAgentDhcpServerGroup 1 } ctAgentDhcpServerPingPktNos OBJECT-TYPE SYNTAX INTEGER (0 | 2..10) MAX-ACCESS read-write STATUS current DESCRIPTION " The no. of packets a DHCP Server sends to a pool address as part of a ping operation.Setting the value of ping-packets to zero turns off DHCP Server ping operation ." DEFVAL { 2 } ::= { ctAgentDhcpServerGroup 2 } ctAgentDhcpServerAutomaticBindingsNos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of IP addresses that have been assigned automatically." ::= { ctAgentDhcpServerGroup 3 } ctAgentDhcpServerExpiredBindingsNos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of expired leases." ::= { ctAgentDhcpServerGroup 4 } ctAgentDhcpServerMalformedMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of malformed(truncated or corrupt) messages that have been received by the DHCP server." ::= { ctAgentDhcpServerGroup 5 } ctAgentDhcpServerDISCOVERMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPDISCOVER that have been received by the DHCP server." ::= { ctAgentDhcpServerGroup 6 } ctAgentDhcpServerREQUESTMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPREQUEST that have been received by the DHCP server." ::= { ctAgentDhcpServerGroup 7 } ctAgentDhcpServerDECLINEMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPDECLINE that have been received by the DHCP server." ::= { ctAgentDhcpServerGroup 8 } ctAgentDhcpServerRELEASEMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPRELEASE that have been received by the DHCP server." ::= { ctAgentDhcpServerGroup 9 } ctAgentDhcpServerINFORMMessagesReceived OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPINFORM that have been received by the DHCP server." ::= { ctAgentDhcpServerGroup 10 } ctAgentDhcpServerOFFERMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPOFFER that have been sent by the DHCP server." ::= { ctAgentDhcpServerGroup 11 } ctAgentDhcpServerACKMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPACK that have been sent by the DHCP server." ::= { ctAgentDhcpServerGroup 12 } ctAgentDhcpServerNAKMessagesSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION " The no. of DHCP messages of type DHCPNAK that have been sent by the DHCP server." ::= { ctAgentDhcpServerGroup 13 } ctAgentDhcpServerClearStatistics OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " Clears the DHCP server statistics." DEFVAL { disable } ::= { ctAgentDhcpServerGroup 14 } ctAgentDhcpServerBootpAutomatic OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Used to enable or disable autmatic address allocation to bootp clients from dynamic address pools." DEFVAL { disable } ::= { ctAgentDhcpServerGroup 15 } --********************************************************************************** -- ctAgentDhcpServerPoolConfigGroup -- This group contains three tables : ctAgentDhcpServerPoolConfigTable, -- ctAgentDhcpServerBindingTable, -- -- ctAgentDhcpServerPoolConfigTable -> This table is used to configure a -- new DHCP address pool on a DHCP server. This table -- is also used to delete a configured DHCP address pool. -- -- ctAgentDhcpServerPoolAllocationTable -> This table is used to configure a DHCP address -- pool for dynamic and manual allocations. -- -- ctAgentDhcpServerExcludedAddressRangeTable -> This table lists the excluded-address ranges -- for a DHCP Server -- -- ctAgentDhcpServerPoolOptionTable -> Table for DHCP Server options --********************************************************************************** ctAgentDhcpServerPoolConfigGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 2 } ctAgentDhcpServerPoolNameCreate OBJECT-TYPE SYNTAX DisplayString (SIZE(0|1..31)) MAX-ACCESS read-write STATUS current DESCRIPTION "A pool is created by applying write operation on this MIB object and providing a new pool-name. Get operation on this MIB object returns a null-value, as for the purpose of viewing the pool name, the user should perform the traversal of ctAgentDhcpServerPoolConfigTable. For this reason the get operation on object ctAgentDhcpServerPoolNameCreate becomes insignificant." ::= { ctAgentDhcpServerPoolConfigGroup 1 } ctAgentDhcpServerPoolConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcpServerPoolConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCP Server Pool configuration entries." ::= { ctAgentDhcpServerPoolConfigGroup 2 } ctAgentDhcpServerPoolConfigEntry OBJECT-TYPE SYNTAX AgentDhcpServerPoolConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a Dhcp server pool." INDEX { ctAgentDhcpServerPoolIndex } ::= { ctAgentDhcpServerPoolConfigTable 1 } AgentDhcpServerPoolConfigEntry ::= SEQUENCE { ctAgentDhcpServerPoolIndex Unsigned32, ctAgentDhcpServerPoolName DisplayString, ctAgentDhcpServerPoolDefRouter DisplayString, ctAgentDhcpServerPoolDNSServer DisplayString, ctAgentDhcpServerPoolLeaseTime Integer32, ctAgentDhcpServerPoolType INTEGER, ctAgentDhcpServerPoolNetbiosNameServer DisplayString, ctAgentDhcpServerPoolNetbiosNodeType INTEGER, ctAgentDhcpServerPoolNextServer IpAddress, ctAgentDhcpServerPoolDomainName DisplayString, ctAgentDhcpServerPoolBootfile DisplayString, ctAgentDhcpServerPoolRowStatus RowStatus } ctAgentDhcpServerPoolIndex OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The Pool Index, which 'll be used as index for the PoolConfig Table." ::= { ctAgentDhcpServerPoolConfigEntry 1 } ctAgentDhcpServerPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the DHCP Address pool. This value cannot be modified" ::= { ctAgentDhcpServerPoolConfigEntry 2 } ctAgentDhcpServerPoolDefRouter OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the default-router list(each default-router is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list." ::= { ctAgentDhcpServerPoolConfigEntry 3 } ctAgentDhcpServerPoolDNSServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the DNS IP servers(each DNS IP server is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current default-router list." ::= { ctAgentDhcpServerPoolConfigEntry 4 } ctAgentDhcpServerPoolLeaseTime OBJECT-TYPE SYNTAX Integer32 (1..86400) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the duration of the lease(in minutes) for an IP address that is assigened from a DHCP server to a DHCP client. For infinite leases, lease-time value will be set to 86400." ::= { ctAgentDhcpServerPoolConfigEntry 5 } ctAgentDhcpServerPoolType OBJECT-TYPE SYNTAX INTEGER{ un-allocated(0), dynamic(1), manual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the type of the binding that is associated with this pool." ::= { ctAgentDhcpServerPoolConfigEntry 6 } ctAgentDhcpServerPoolNetbiosNameServer OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the IP address-list of Net BIOS name-servers that are available to DHCP clients (each IP address in this list is separated by comma and the list is terminated by semi-colon), an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between).User should enter a 'null' or 'NULL' string to remove current Net BIOS name-server list." ::= { ctAgentDhcpServerPoolConfigEntry 7 } ctAgentDhcpServerPoolNetbiosNodeType OBJECT-TYPE SYNTAX INTEGER { none(0), b-node(1), p-node(2), m-node(4), h-node(8) } MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the NetBIOS node-type for DHCP clients. 'none' is shown if node-type is not set to any of the four values." ::= { ctAgentDhcpServerPoolConfigEntry 8 } ctAgentDhcpServerPoolNextServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "This configures the next server in the boot-process of a DHCP clients.User should enter zero(0.0.0.0) to remove the current Next-server address" ::= { ctAgentDhcpServerPoolConfigEntry 9 } ctAgentDhcpServerPoolDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..255)) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the domain-name for a DHCP client. User should enter a 'null' or 'NULL' string to remove specified domain-name." ::= { ctAgentDhcpServerPoolConfigEntry 10 } ctAgentDhcpServerPoolBootfile OBJECT-TYPE SYNTAX DisplayString (SIZE(1..128)) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the name of the default boot image for a DHCP client.User should enter a 'null' or 'NULL' string to remove specified bootfile name." ::= { ctAgentDhcpServerPoolConfigEntry 11 } ctAgentDhcpServerPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The row status variable is used according to installation and removal conventions for conceptual rows. When a pool is created by applying write operation on 'ctAgentDhcpServerPoolCreateName',row-status becomes 'active'. If row-status for a poolEntry is set to 'destroy', the corresponding pool gets deleted. " ::= { ctAgentDhcpServerPoolConfigEntry 12 } --********************************************************************************** ctAgentDhcpServerPoolAllocationTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcpServerPoolAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCP Server's pool entries, showing the binding(dynamic/manual) specific parameters." ::= { ctAgentDhcpServerPoolConfigGroup 3 } ctAgentDhcpServerPoolAllocationEntry OBJECT-TYPE SYNTAX AgentDhcpServerPoolAllocationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a Dhcp server's allocation pool." AUGMENTS { ctAgentDhcpServerPoolConfigEntry } ::= { ctAgentDhcpServerPoolAllocationTable 1 } -- All objects are of type read-write AgentDhcpServerPoolAllocationEntry ::= SEQUENCE { ctAgentDhcpServerPoolAllocationName DisplayString, ctAgentDhcpServerDynamicPoolIpAddress IpAddress, ctAgentDhcpServerDynamicPoolIpMask IpAddress, ctAgentDhcpServerDynamicPoolIpPrefixLength Unsigned32, ctAgentDhcpServerPoolAllocationType INTEGER, ctAgentDhcpServerManualPoolClientIdentifier DisplayString, ctAgentDhcpServerManualPoolClientName DisplayString, ctAgentDhcpServerManualPoolClientHWAddr DisplayString, ctAgentDhcpServerManualPoolClientHWType INTEGER, ctAgentDhcpServerManualPoolIpAddress IpAddress, ctAgentDhcpServerManualPoolIpMask IpAddress, ctAgentDhcpServerManualPoolIpPrefixLength Unsigned32 } ctAgentDhcpServerPoolAllocationName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..30)) MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies name of the DHCP Address pool having dynamic binding. This value is same as ctAgentDhcpServerPoolName of the ctAgentDhcpServerPoolConfigTable." ::= { ctAgentDhcpServerPoolAllocationEntry 1 } ctAgentDhcpServerDynamicPoolIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the DHCP Address pool. The IP address must be set before setting the IP Mask or IP Prefix Length. After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'." ::= { ctAgentDhcpServerPoolAllocationEntry 2 } ctAgentDhcpServerDynamicPoolIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The bit-combination that renders which portion of the address of the DHCP address pool refers to the network or subnet and which part refers to the host.The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'manual'." ::= { ctAgentDhcpServerPoolAllocationEntry 3 } ctAgentDhcpServerDynamicPoolIpPrefixLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'mnaual'." ::= { ctAgentDhcpServerPoolAllocationEntry 4 } ctAgentDhcpServerPoolAllocationType OBJECT-TYPE SYNTAX INTEGER{ un-allocated(0), dynamic(1), manual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the type of the binding that is associated with this pool." ::= { ctAgentDhcpServerPoolAllocationEntry 5 } ctAgentDhcpServerManualPoolClientIdentifier OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the unique identifier (in colon separated hexadecimal format) of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. To set this object, input should be 7 octets long with the hardware type in the first octet." ::= { ctAgentDhcpServerPoolAllocationEntry 6 } ctAgentDhcpServerManualPoolClientName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..30)) MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the name of a DHCP client. Client name should't include domain-name. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. " ::= { ctAgentDhcpServerPoolAllocationEntry 7 } ctAgentDhcpServerManualPoolClientHWAddr OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the hardware-address of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. After hardware-address, hardware-type will be configured." ::= { ctAgentDhcpServerPoolAllocationEntry 8 } ctAgentDhcpServerManualPoolClientHWType OBJECT-TYPE SYNTAX INTEGER{ ethernet(1), ieee802(6) } MAX-ACCESS read-write STATUS current DESCRIPTION "It specifies the hardware-type of a DHCP client. It is valid for manual bindings only. It displays 'unconfigured',if the binding type is 'un-allocated',or,'dynamic'. Before this, hardware-address must be configured." DEFVAL { ethernet } ::= { ctAgentDhcpServerPoolAllocationEntry 9 } ctAgentDhcpServerManualPoolIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The IP address of the DHCP Address pool for manual binding. The IP address must be set before setting the IP Mask or IP Prefix Length.After setting IP address, network -mask, or IP Prefix length must be set in order to change the pool type to dynamic. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'." ::= { ctAgentDhcpServerPoolAllocationEntry 10 } ctAgentDhcpServerManualPoolIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The bit-combination that renders which portion of the address of the DHCP address pool for a manual binding refers to the network or subnet and which part refers to the host. The IP address must have been set before. This value shows 0.0.0.0, if the binding type is 'un-allocated',or,'dynamic'." ::= { ctAgentDhcpServerPoolAllocationEntry 11 } ctAgentDhcpServerManualPoolIpPrefixLength OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the no. of bits that comprise the address-prefix. The prefix is an alternative way of specifying the network-mask of the client.The IP address must have been set before. This value shows 0, if the binding type is 'un-allocated',or,'dynamic'." ::= { ctAgentDhcpServerPoolAllocationEntry 12 } --*********************************************************************************************** ctAgentDhcpServerExcludedAddressRangeCreate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "It sets the IP address-ranges(from low to high) that a DHCP server should not assign to DHCP clients. Each time this MIB object is set successfully, one excluded range of IP address will be set. It is given in format - start and end IP address separated by '-' and terminated by ';'. One example would be - 192.168.36.1-200.1.1.1; . This sets one excluded range of IP address,which starts at 192.168.36.1 and ends at 200.1.1.1. If only start IP address is given, end IP address is assumed to be equal to the start IP address. Get operation on this MIB object returns a null-value, as for the purpose of viewing the exclude-address ranges, the user should perform the traversal of ctAgentDhcpServerExcludedAddressRangeTable. For this reason the get operation on object ctAgentDhcpServerExcludedAddressRangeCreate becomes insignificant." ::= { ctAgentDhcpServerPoolConfigGroup 4 } ctAgentDhcpServerExcludedAddressRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcpServerExcludedAddressRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCP Server Pool configuration entries." ::= { ctAgentDhcpServerPoolConfigGroup 5 } ctAgentDhcpServerExcludedAddressRangeEntry OBJECT-TYPE SYNTAX AgentDhcpServerExcludedAddressRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a Dhcp server excluded address range table." INDEX { ctAgentDhcpServerExcludedRangeIndex } ::= { ctAgentDhcpServerExcludedAddressRangeTable 1 } -- All objects are of type read-only, except ctAgentDhcpServerExcludedAddressRangeStatus, -- which is of type read-write AgentDhcpServerExcludedAddressRangeEntry ::= SEQUENCE { ctAgentDhcpServerExcludedRangeIndex Unsigned32, ctAgentDhcpServerExcludedStartIpAddress IpAddress, ctAgentDhcpServerExcludedEndIpAddress IpAddress, ctAgentDhcpServerExcludedAddressRangeStatus RowStatus } ctAgentDhcpServerExcludedRangeIndex OBJECT-TYPE SYNTAX Unsigned32 (1..256) MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the index of the excluded IP address-range table." ::= { ctAgentDhcpServerExcludedAddressRangeEntry 1 } ctAgentDhcpServerExcludedStartIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the starting IP address of the excluded address-range." ::= { ctAgentDhcpServerExcludedAddressRangeEntry 2 } ctAgentDhcpServerExcludedEndIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the ending IP address of the excluded address-range." ::= { ctAgentDhcpServerExcludedAddressRangeEntry 3 } ctAgentDhcpServerExcludedAddressRangeStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the row-status of the excluded address-range. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-range is deleted." ::= { ctAgentDhcpServerExcludedAddressRangeEntry 4 } --*********************************************************************************************** ctAgentDhcpServerPoolOptionCreate OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This sets the option for an existing DHCP Server pool. Here, it is required to enter the pool-index, for which option is to be set and the value of the DHCP option code in string-format : pool-index and option code separated by '-' and terminated by ';', one example would be -> 1-19; , 1 is the pool-index and 19 is the option code. " ::= { ctAgentDhcpServerPoolConfigGroup 6 } ctAgentDhcpServerPoolOptionTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcpServerPoolOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table for configuring DHCP Server options." ::= { ctAgentDhcpServerPoolConfigGroup 7 } ctAgentDhcpServerPoolOptionEntry OBJECT-TYPE SYNTAX AgentDhcpServerPoolOptionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a Dhcp server option table." INDEX { ctAgentDhcpServerPoolOptionIndex, ctAgentDhcpServerPoolOptionCode } ::= { ctAgentDhcpServerPoolOptionTable 1 } -- All objects are of type read-write, except the indexes ctAgentDhcpServerPoolOptionIndex and -- ctAgentDhcpServerPoolOptionCode -- For a particular poolOption entry, option data ( ASCII, HEX and IP Address) can be -- entered multiple times provided data-format is same each time. AgentDhcpServerPoolOptionEntry ::= SEQUENCE { ctAgentDhcpServerPoolOptionIndex Unsigned32, ctAgentDhcpServerPoolOptionCode Unsigned32, ctAgentDhcpServerOptionPoolName DisplayString, ctAgentDhcpServerPoolOptionAsciiData DisplayString, ctAgentDhcpServerPoolOptionHexData DisplayString, ctAgentDhcpServerPoolOptionIpAddressData DisplayString, ctAgentDhcpServerPoolOptionStatus RowStatus } ctAgentDhcpServerPoolOptionIndex OBJECT-TYPE SYNTAX Unsigned32 (1..512) MAX-ACCESS read-only STATUS current DESCRIPTION "The Pool Index alongwith option-code, acts as index for the DHCP Server Option table. " ::= { ctAgentDhcpServerPoolOptionEntry 1 } ctAgentDhcpServerPoolOptionCode OBJECT-TYPE SYNTAX Unsigned32 (1..254) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the DHCP option code. This alongwith pool-index acts as the index of the DHCP Server Option table." ::= { ctAgentDhcpServerPoolOptionEntry 2 } ctAgentDhcpServerOptionPoolName OBJECT-TYPE SYNTAX DisplayString (SIZE(1..31)) MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the DHCP Address pool. This value cannot be modified" ::= { ctAgentDhcpServerPoolOptionEntry 3 } ctAgentDhcpServerPoolOptionAsciiData OBJECT-TYPE SYNTAX DisplayString (SIZE(1..441)) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies an NVT ASCII character string. ASCII character strings that contain white space must be delimited by quotation marks. If an ascii optiondata is entered again, it gets concatenated with the previous ascii data." ::= { ctAgentDhcpServerPoolOptionEntry 4 } ctAgentDhcpServerPoolOptionHexData OBJECT-TYPE SYNTAX DisplayString (SIZE(1..1324)) MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies semi-colon separated hexadecimal data. Two hexadecimal digits in hexadecimal character string represents one byte . Hexadecimal strings can be entered in the following formats : 1) continuous hexadecimal digits like -- 0123456789abcdef 2) hexadecimal digits separated by space ' ' -- 01 23 45 67 de 0f 3) Two hexadecimal digits separated by delimeter ':' -- 01:02:a0 de:0f 78:5e 4) Four hexadecimal digits separated by delimeter '.' -- 01ab.c0de.7865 If a Hex optiondata is entered again, it gets concatenated with the previous Hex data." ::= { ctAgentDhcpServerPoolOptionEntry 5 } ctAgentDhcpServerPoolOptionIpAddressData OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the IP-address list(each IP-address is separated by comma and the list is terminated by semi-colon) for a DHCP client, an example would be 10.10.1.1,192.168.36.1,157.227.44.1;(no spaces in between). If a IP option is entered again, it gets concatenated with the previous IP data. Maximum no. of IP addresses that can be entered at one time is 8. " ::= { ctAgentDhcpServerPoolOptionEntry 6 } ctAgentDhcpServerPoolOptionStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the row-status of the DHCP Server Pool option." ::= { ctAgentDhcpServerPoolOptionEntry 7 } --************************************************************************************** -- ctAgentDhcpServerLeaseGroup -> contains MIB objects displaying and clearing leases of a DHCP server -- --************************************************************************************** ctAgentDhcpServerLeaseGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 3 } ctAgentDhcpServerLeaseClearAllBindings OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clears All the DHCP server bindings." DEFVAL { disable } ::= { ctAgentDhcpServerLeaseGroup 1} ctAgentDhcpServerLeaseTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcpServerLeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the DHCP Server's Lease entries." ::= { ctAgentDhcpServerLeaseGroup 2 } ctAgentDhcpServerLeaseEntry OBJECT-TYPE SYNTAX AgentDhcpServerLeaseEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents entry for a Dhcp server's leases." INDEX { ctAgentDhcpServerLeaseIPAddress } ::= { ctAgentDhcpServerLeaseTable 1 } -- All objects are of type read-only AgentDhcpServerLeaseEntry ::= SEQUENCE { ctAgentDhcpServerLeaseIPAddress IpAddress, ctAgentDhcpServerLeaseIPMask IpAddress, ctAgentDhcpServerLeaseHWAddress MacAddress, ctAgentDhcpServerLeaseRemainingTime TimeTicks, ctAgentDhcpServerLeaseType INTEGER, ctAgentDhcpServerLeaseStatus RowStatus } ctAgentDhcpServerLeaseIPAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the IP address leased to the client." ::= { ctAgentDhcpServerLeaseEntry 1 } ctAgentDhcpServerLeaseIPMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the IP mask of the address leased to the client." ::= { ctAgentDhcpServerLeaseEntry 2 } ctAgentDhcpServerLeaseHWAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the hardware address of the client." ::= { ctAgentDhcpServerLeaseEntry 3 } ctAgentDhcpServerLeaseRemainingTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the period for which the lease is valid. It is displayed in days, hours, minutes, and seconds." ::= { ctAgentDhcpServerLeaseEntry 4 } ctAgentDhcpServerLeaseType OBJECT-TYPE SYNTAX INTEGER{ automatic(1), manual(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the type of address lease as Automatic or Manual." ::= { ctAgentDhcpServerLeaseEntry 5 } ctAgentDhcpServerLeaseStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the row-status of the address-lease. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding address-lease is cleared." ::= { ctAgentDhcpServerLeaseEntry 6 } --************************************************************************************** -- ctAgentDhcpServerAddressConflictGroup -> contains MIB objects displaying and clearing -- address conflicts found by a DHCP server, when addresses are offered to the client. -- --************************************************************************************** ctAgentDhcpServerAddressConflictGroup OBJECT IDENTIFIER ::= { ctFastPathDHCPServerMIB 4 } ctAgentDhcpServerClearAllAddressConflicts OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Clears all the address-conflicts found by DHCP server,when set to enable." DEFVAL { disable } ::= { ctAgentDhcpServerAddressConflictGroup 1} ctAgentDhcpServerAddressConflictLogging OBJECT-TYPE SYNTAX INTEGER { enable(1), disable(2) } MAX-ACCESS read-write STATUS current DESCRIPTION " It is used to enable, or disables the logging of address-conflicts on a DHCP Server." DEFVAL { enable } ::= { ctAgentDhcpServerAddressConflictGroup 2} ctAgentDhcpServerAddressConflictTable OBJECT-TYPE SYNTAX SEQUENCE OF AgentDhcpServerAddressConflictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A table of the conflicting-address entries." ::= { ctAgentDhcpServerAddressConflictGroup 3 } ctAgentDhcpServerAddressConflictEntry OBJECT-TYPE SYNTAX AgentDhcpServerAddressConflictEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Represents a conflicting-address entry." INDEX { ctAgentDhcpServerAddressConflictIP } ::= { ctAgentDhcpServerAddressConflictTable 1 } -- All objects are of type read-only, except ctAgentDhcpServerAddressConflictStatus which is -- of type read-write AgentDhcpServerAddressConflictEntry ::= SEQUENCE { ctAgentDhcpServerAddressConflictIP IpAddress, ctAgentDhcpServerAddressConflictDetectionType INTEGER, ctAgentDhcpServerAddressConflictDetectionTime TimeTicks, ctAgentDhcpServerAddressConflictStatus RowStatus } ctAgentDhcpServerAddressConflictIP OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the conflicting IP address assigned to the client by DHCP server." ::= { ctAgentDhcpServerAddressConflictEntry 1 } ctAgentDhcpServerAddressConflictDetectionType OBJECT-TYPE SYNTAX INTEGER{ ping(1), gratuitousArp(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the address-conflict detection-method." ::= { ctAgentDhcpServerAddressConflictEntry 2 } ctAgentDhcpServerAddressConflictDetectionTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "This specifies the sysUpTime at which the address-conflict was detected." ::= { ctAgentDhcpServerAddressConflictEntry 3 } ctAgentDhcpServerAddressConflictStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "This specifies the row-status of the conflicting-address entry. Implemented values are - active(1) and destroy(6). For a valid range, the row-satus will return active(1). When it is set to destroy(6), the corresponding conflicting-address entry is cleared." ::= { ctAgentDhcpServerAddressConflictEntry 4 } END